KAVACCPT04A - Steam cleaner Kogan - Free user manual and instructions
Find the device manual for free KAVACCPT04A Kogan in PDF.
User questions about KAVACCPT04A Kogan
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Steam cleaner in PDF format for free! Find your manual KAVACCPT04A - Kogan and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KAVACCPT04A by Kogan.
USER MANUAL KAVACCPT04A Kogan
natural_image
Technical line drawing of a mechanical device with attached components (no text or symbols)Lightweight Stain Clean Carpet and Upholstery Spot Cleaner
KAVACCPT04A
Safety & Warnings 3
Accessories 5
Overview 5
Assembly 6
Operation 9
Cleaning & Care 14
Specifications 23
Troubleshooting 23
Safety & Warnings
- This appliance is for domestic household use only and should not be used for any other purpose, such as commercial use.
- If the power cord is damaged, cease use immediately and contact help.Kogan.com for support.
- This appliance can be used by individuals with reduced physical, sensory, or mental capabilities, or those lacking experience and knowledge if they have been given supervision or instruction on safe use and understand the associated hazards.
- This appliance is not a toy and should not be used by children.
- Unplug the appliance from the electrical outlet when not in use and before performing cleaning or maintenance.
- For detailed cleaning instructions and precautions during maintenance, refer to the 'Cleaning and Care' section.
- The following objects must not be picked up with this appliance, as doing so may cause damage or fire, leading to potential injury:
• Large or sharp objects, such as glass.
- Harmful or corrosive liquids, such as solvents and detergents.
- Flammable or explosive substances, such as gasoline or alcohol.
- Burning or glowing items, such as cigarettes, matches, or hot ashes.
- Do not direct liquid or steam toward equipment containing electrical components, such as the interior of ovens.
- Do not open the clean water tank or wastewater tank while the appliance is in use.
- Do not leave the appliance unattended while plugged into the electrical outlet.
- If the appliance has been dropped, shows visible signs of damage, or is leaking, cease use immediately and contact help.Kogan.com for support.
- Keep the appliance out of reach of children when plugged in or cooling down.
- Always disconnect the appliance from the electrical outlet when left unattended and before assembling, disassembling, or cleaning.
- Do not unplug the appliance by pulling on the cord. Always grasp the plug directly.
- Use only original accessories recommended in this user guide.
-
Do not use the appliance outdoors.
• Children should be supervised to ensure they do not play with the appliance. -
Do not use the appliance with any openings blocked; keep it free of dust, lint, hair, or anything that may reduce airflow.
-
Do not use the appliance to pick up the following items:
-
Dry dust.
- Large plastic bags.
• Metal objects, such as needles or pins. -
Excessive rubbish.
• Large quantities of powder.
• Large quantities of sand. -
Confirm that the solvent does not damage the carpet before use. When using detergent, first test it on a small, inconspicuous area of the fabric to ensure there is no discoloration.
- Do not use diluents, aniline, chloroform, or flammable solvents.
- Do not spray any liquids such as insecticides, hair care appliances, or lubricating oil.
- Do not use the appliance to vacuum flammable or combustible substances (e.g., kerosene, gasoline, thinner, copier toner).
- Do not use the appliance to vacuum oil, smoke, or steam.
- Do not use the appliance to vacuum dry dust.
- Do not operate the unit near combustible substances such as lit cigarettes or incense sticks to avoid fire hazards.
- Only use water (including clean tap water or recommended detergents) below 40^ C in the clean water tank.
Replaceable Parts
The replaceable parts can be removed and should be replaced if damaged or lost. Ensure they are properly installed before operating the appliance.

natural_image
Simple line drawing of a rectangular tray or tray shape (no text or symbols)Seal ring for upper cover

Air inlet sponge

Filtering sponge
Accessories

natural_image
Technical line drawing of a mechanical component (no text or symbols)Tough stain brush

natural_image
Technical line drawing of a mechanical bracket or support structure (no text or symbols)Upholstery cleaner
Overview

text_image
Power cord Handle Power button Wastewater tank Clean water tank Hose handle Hose hookNotes:
- The pump is assembled in the body of appliance.
- Hose should be wrapped on the appliance (showed as figure above) when the appliance is being moved.
Assembly
- Insert the hose hook into the designated slot on the appliance.

text_image
Hose hook Slot- Remove the clean water tank from the appliance.

text_image
Clean water tank- Open the upper cover of the clean water tank and fill it with water. After filling, close and lock the top cover securely.

text_image
Upper cover Water
natural_image
Line drawing of a mechanical device casing with a handle and mounting bracket (no text or symbols)Notes:
• To avoid leaks, ensure the top cover is tightly locked.
• The maximum water capacity is 0.8L.
• After use, empty any remaining water to prevent mildew.
- Attach the clean water tank back onto the appliance.

natural_image
Line drawing of a mechanical device with a cable and directional arrow indicating assembly (no text or symbols)Note:
Avoid shaking the clean water tank during installation.
- Connect the hose handle to your chosen accessory.

natural_image
Technical line drawing of a mechanical device with three views, showing a transformation from a cylindrical component to a cable-like structure (no text or symbols present)- Secure the hose and power cord before moving the appliance.

natural_image
Line drawing of a mechanical device with attached components and wiring (no text or symbols)Operation
- Insert the plug into the electrical outlet.

natural_image
Line drawing of a cable tied with a connector (no text or symbols)- Press the 'Power' button to start the appliance.

text_image
Power button- Press the 'Spray' button on the hose handle to spray water onto the stain, allowing it to surface on the fabric.

text_image
Spray button- While spraying water, move the accessory over the stain to absorb the dirty water. Spray water to loosen the stain, and the accessory will draw the dirty water up.

text_image
Spray button- Release the spray button, then move the accessory over the dirty water to remove it. Make sure to dry the fabric to avoid mildew.

natural_image
Technical line drawing of a mechanical component lying on a textured surface (no text or symbols)- Press the 'Power' button to turn off the appliance.

text_image
Power button- Unplug the power cord from the electrical outlet.

natural_image
Simple line drawing of a rope tied with a cable, no text or symbols present- Clean both the wastewater tank and clean water tank.

text_image
Wastewater tank Clean water tankNote
- If water enters the appliance, stop operation immediately. Clean and dry the interior, including the body, tube, and tank.
- If the appliance is used when the water level is above the maximum line, it must be stopped immediately, as the suction power will decrease or be lost due to the action of the buoy. It is normal for a small amount of water to remain in the hose.

text_image
MAX Buoy Maximum LineUsing the Tough Stain Brush
Detergents
- For the best results, apply a solvent to the carpet before cleaning or brushing.
- Ensure the solvent is safe for the carpet before use.
- Do not use diluents, aniline, chloroform or flammable solvents.
| Recommended Detergents | Not Appropriate |
| Strong alkaline ionised water.Baking soda.Citric acid.Hypochlorous acid.Weak acid electrolytic water.Low-foam detergent. | Neutral detergent for kitchen use.Strongly alkaline detergent.Strongly acidic detergent.Detergents that produce excessive foam. |
Removing Stubborn Dirt
- Apply the solvent to the carpet and use the brush attachment to lift the dirt. Refer to the solvent's user guide for correct usage and quantity. Use it carefully and correctly.

text_image
Solvent Dirt
text_image
Dirt- Absorb the dirt and ensure no solvent remains on the carpet. If the liquid level (including foam) in the wastewater tank exceeds the maximum line, stop operating the appliance immediately and empty the tank according to the image below to prevent water from entering the appliance.

natural_image
Diagram of a gun spraying water onto a surface with directional arrows indicating flow or movement (no text or symbols)
text_image
Waste water tank Liquid level Maximum line MAX FoamUsing the Upholstery Cleaner
Place the upholstery cleaner on the surface of the cushion and move it up and down or from front to back.

natural_image
Line drawing of a portable electronic device with a textured surface and a handle (no text or symbols)Cleaning & Care
- Power off the appliance and unplug the power cord before performing maintenance.
- To avoid electric shock, do not immerse the appliance in water or expose it to rain during cleaning and maintenance.
- Do not use detergents, diluents, benzene, or other chemical agents to clean the appliance.
- Allow all parts to air dry after washing.
- Ensure all parts are properly reinstalled into the appliance after cleaning and maintenance.
- After performing cleaning and maintenance, store the appliance in a dry place at a normal temperature, away from direct sunlight.
Cleaning the Body
- For general dirt: Wipe with a damp cloth.
- For stubborn dirt:
- Wipe with a damp cloth using a mild detergent.
- Follow with a dry cloth.
Cleaning the Wastewater Tank
- Turn off the appliance and unplug the power cord from the electrical outlet.

natural_image
Line drawing of a mechanical device with no visible text or symbols- Detach the wastewater tank from the appliance as indicated by the arrow in the figure below.

natural_image
Technical line drawing of a tracked robotic device with visible wiring and mounting bracket (no text or symbols)Note:
To avoid overflowing, do not tilt or shake the wastewater tank while moving it.
- Remove the top cover of the wastewater tank, tilt the tank, and pour out the sewage.

natural_image
Technical line drawing of two open battery compartments with internal components, shown in side and top views (no text or symbols)- Clean the wastewater tank body, top cover, and sealing ring.

text_image
Sealing ring Top cover Wastewater tank bodyNote:
To prevent bacteria or unpleasant odours, clean the wastewater tank body and related parts promptly and allow them to dry after cleaning.
- Reassemble the wastewater tank:
a. Insert the sealing ring into the groove in the top cover.
b. Insert the rib in the top cover into the slot in the wastewater tank body.
c. Rotate the top cover until you hear a 'click', indicating the wastewater tank is securely assembled.

text_image
Top cover Sealing ring Slot Groove Rib (Hidden) Wastewater tank body- Insert the wastewater tank back into the appliance as shown by the arrow in the figure below and press firmly.

natural_image
Technical line drawing of a mechanical device with hoses and a central housing (no text or symbols)Note:
To prevent liquid leakage or reduced cleaning performance, do not shake the wastewater tank during assembly.
Clean the Clean Water Tank
- Remove the clean water tank from the appliance.

text_image
Clean water tank- Open the top cover of the clean water tank and pour out any remaining water.

text_image
Clean water tank Top cover- Insert the rib of the top cover into the slot in the clean water tank body and rotate the top cover until you hear a 'click' sound, indicating that it is securely assembled.

text_image
Top cover Clean water tank- Tilt the appliance to pour out any remaining water from the body, and wipe with a cloth if necessary.

natural_image
Technical line drawing of a mechanical component with no visible text or symbols- Insert the empty clean water tank back into the appliance body and press it firmly, as shown by the arrow in the figure below.

text_image
Clean water tank (empty)- Power on the appliance and press the 'Spray' button on the hose handle to spray out any remaining water inside the hose, clean water tank, or appliance.

natural_image
Technical line drawing of a mechanical component with no visible text or symbolsCleaning the Accessories
After use, remove the tough stain brush or upholstery brush from the appliance, wash thoroughly, and air dry. Do not place them in direct sunlight.

text_image
Upholstery cleaner Tough stain brush Clean water tank Wastewater tankDisassembling the Tough Stain Brush
Pull the cover upwards to remove it.

text_image
Pull upwards Cover Body Cover BodyAssembling the Tough Stain Brush
- Insert the rib in the brush body into the slot in the brush cover.
- Rotate the cover until you hear a 'click', indicating that the brush is securely assembled.

text_image
Cover Body
text_image
Slot RibCleaning the Nozzle
If the nozzle is blocked, clean it immediately using a pin or needle.

text_image
Nozzle
natural_image
Technical line drawing of a nozzle component (no text or symbols on the diagram itself)Inspecting the Hose
Periodically check the hose for holes or damage.

natural_image
Line drawing of a mechanical device with attached tubing (no text or symbols)
natural_image
Cross-sectional diagram of a cable or wire structure with no visible text or symbolsAir leaking
Cleaning the Inlet Air Sponge and Filter Sponge
The inlet air sponge and filter sponge are replaceable parts that should be cleaned or washed periodically. Replace them if necessary.

natural_image
Technical line drawing of a mechanical assembly with no visible text or symbols
natural_image
Line drawing of a faucet spraying water onto a cylindrical object (no text or symbols)Specifications
Rated Voltage 220-240V
Rated Power 330W
Wastewater Tank Capacity 0.5L
Clean Water Tank Capacity 0.8L
Hose Length 1.2m
Appliance Size
Net Weight 2.5kg
Accessories
260 × 220 × 270mm
- Tough stain brush
- Upholstery cleaner
Troubleshooting
When the appliance is abnormal in process of operation, please read the information below carefully before repairing:
| Problem | Possible Cause | Solution |
| Working abnormally | Poor contact due to a loose plug or incorrect plugging. | Turn off the power, unplug the power cord, and re-plug it securely. |
| Damaged internal/external power cord. | Contact help.Kogan.com for support. | |
| Power is off. | Press the 'Power' button. | |
| Wastewater tank is full, causing the buoy to activate | Empty the wastewater tank. | |
| No water or low water spray. | Hose malfunction. | Check if the hose is damaged, folded or cracked. |
| Wastewater tank incorrectly installed. | Reinstall it correctly. | |
| Inlet air sponge is blocked. Clean or replace sponge. | ||
| Handle or pump is damaged. | Contact help.Kogan.com for support. | |
Need more information?
We hope that this user guide has given you the assistance needed for a simple set-up.
For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.Kogan.com.
kogan.com