AXSSO-CH2 - Car Interface AXESS - Free user manual and instructions

USER MANUAL AXSSO-CH2 AXESS

Three black automotive electrical connectors with colored wires, no visible text or symbols

Dodge/Jeep Stop/Start Override Interface 2018-Up

INTERFACE FEATURES

• Allows the override of the STOP/START engine feature
• The factory STOP/START button can resume the STOP/START feature
• Can be used with either a factory or aftermarket radio
• Vehicle type configured through the Axxess Updater software program
• Simple plug n' play installation, no wiring required

INTRODUCTION

The AXSSO-CH2 is designed to disengage the STOP/START feature of the vehicle, and keep that feature disengaged even after the key has been cycled. The AXSSO-CH2 will work with either an aftermarket radio, or a factory radio. A simple plug n' play installation is all that is required to install the device in the vehicle, and programming through a Windows 10 computer via the Axxess Updater software program.

APPLICATIONS

Dodge

Durango 2018-Up

Jeep

Cherokee 2019-Up

Grand Cherokee 2018-Up

TABLE OF CONTENTS

Programming 2

Connections 3

Operation 3

INTERFACE COMPONENTS

• AXSSO-CH2 interface
• AXSSO-CH2 harness

TOOLS & INSTALLATION ACCESSORIES REQUIRED

• Zip ties • Cutters (for zip ties)
• Micro-B USB cable
  (Axxess part number AXUSB-MCBL)

Product Info

PROGRAMMING

Help AXXESS INTEGRATE SWC Configuration Trigger Configuration Add-Cam Configuration Stop / Start Update Firmware Help

(Figure A) (Figure B) (Figure C)

Help Select Vehicle True: 2018 Model: Dodge Model: Durango Program Interface Main Menu Ready

Help Configuration Successful OK Configuration was within successfully OK Program Interface Main Menu Successfully write configuration to target

1.

Download and install the Axxess Updater software program from: axxessinterfaces.com/resources/updater-software

3.

On the next screen that opens, select the year, make, and model of the vehicle, then press Program Interface. (Figure B)

2.

Connect the micro-B USB cable (sold separately) to the computer and AXSSO-CH2 interface. Open the Axxess Updater software program and wait until the word Ready is shown in the bottom left of the screen. Select Stop / Start. (Figure A)

4.

When the Configuration Successful box pops up, the programming process is complete. (Figure C)

Continue to Installation

INSTALLATIONOPERATION

These vehicles will connect to the hazard switch in the dashboard.

Dodge

Durango 2018-Up

• Disassembly instructions: metraonline.com/part/99-6537B

Jeep

Cherokee 2019-Up

• Disassembly instructions: metraonline.com/part/99-6518

Grand Cherokee 2018-Up

• Disassembly instructions: metraonline.com/part/99-6536S

From the hazard switch:

1. Unplug the connector from the hazard switch.
2. Plug the AXSSO-CH2 harness in between the hazard switch and hazard switch harness.
3. Plug the AXSSO-CH2 harness into the AXSSO-CH2 interface.

To Hazard Switch To Hazard Switch Harness AXXESS

Re-engaging the STOP/START feature

1.

Press the factory STOP/START button to re-engage the STOP/START feature.

Having difficulties? We're here to help.

Contact our Tech Support line at:

386-257-1187

Or via email at:

[e-mail]

Tech Support Hours (Eastern Standard Time)

Monday - Friday: 9:00 AM - 7:00 PM

Saturday: 10:00 AM - 7:00 PM

Sunday: 10:00 AM - 4:00 PM

KNOWLEDGE IS POWER

Enhance your installation and fabrication skills by enrolling in the most recognized and respected

enrolling in the most recognized and resp mobile electronics school in our industry.

Log onto www.installerinstitute.edu or call

386-672-5771 for more information and take steps toward a better tomorrow.

Metra recommends MECP certified technicians