AXPIO-STY1 - Unspecified AXESS - Free user manual and instructions

USER MANUAL AXPIO-STY1 AXESS

Interior view of a car dashboard with air filters, steering wheel, and digital display (no visible text or symbols)

Chevrolet Suburban/Tahoe 2015-2020 GMC Yukon 2015-2020

KIT FEATURES

• Designed for Pioneer DMH-W4600NEX/W4660NEX or DMH-WC5700NEX receivers
• Allows for the retention and adjustment of the factory personalization menu through the Pioneer radio
• Provides a visual view of HVAC and gauges on the Pioneer screen (cannot be adjusted via the screen)

(cont. on page 2)

KIT COMPONENTS

A) Radio housing trim panel • B) Brackets • C) Trim panel bracket • D) Pocket • E) #8 x 3/8" Truss-head Phillips screws (4)
Not Shown: Radio Interface, LD-GMLAN09-PIO, LD-BACKCAM-MOST, LD-GMSWC, AD-EU5, 40-GPS-PIO, PRO4AVIC-PIO / PRO4-PIORCA, LD-AX-SPK, AXUSB-GM6

AE

Technical line drawing of a mechanical component or housing (no text or symbols visible)

TABLE OF CONTENTS

Speaker Installation....2

Dash Disassembly 3-5

Connections......6

Kit Assembly 7

Radio Operations....8-9

Visit AxxessInterfaces.com for more detailed information about the product and up-to-date vehicle specific applications.

WIRING & ANTENNA CONNECTIONS (sold separately)

- RGB Extension Cable: Pioneer part # CD-RGB150A (not sold by Metra)

TOOLS REQUIRED

• Panel removal tool • Phillips screwdriver
• 9/32" socket wrench

ATTENTION: With the key out of the ignition, disconnect the negative battery terminal before installing this product. Ensure that all installation connections, especially the air bag indicator lights, are plugged in before reconnecting the battery or cycling the ignition to test this product.

NOTE: Refer also to the instructions included with the aftermarket accessory before installing this device.

KIT FEATURES (CONT.)

KIT FEATURES (cont. from cover)

• Complete Plug-n-Play installation
• Includes dash kit with Axxess interface and vehicle-specific T-harness
• Includes a 3' USB/AUX/HDMI replacement cable with panel
• Includes radio antenna adaptor for GPS
• Provides accessory power (12-volt 10-amp)

• Provides NAV outputs (parking brake, reverse, speed sense)

• Retains audio controls on the steering wheel

• Works in both single and dual-zone vehicles
• Retains safety chimes through an included off-board speaker
• USB Micro "B" USB updatable
• Dash kit is painted scratch-resistant matte black to match the factory finish
• For non-amplified vehicles only

SPEAKER INSTALLATION

Install the provided speaker in the dash prior to assembling the radio components.

Note: Make sure this is mounted in a location suitable for the driver to hear. (Audio level for the speaker can be changed via the radio, once installed.)

DASH DISASSEMBLY

1. Unsnap and remove the panel above the radio screen. (Figure A)
2. Unsnap and remove the trim panel located at the driver's side edge of dash. (Figure B)
3. Remove (1) screw from left side of panel below steering column. (Figure C) Note: The panel does not need to be fully removed.
4. Using the panel removal tool, carefully unclip and remove the center console cover. (Figure D)
5. Unsnap and remove the panel above the glove box. (Figure E)

Continued on next page

Diagram of a car interior showing dashboard and rearview mirror (no text or symbols)

Diagram of a car interior showing dashboard, steering wheel, and directional arrow (no text or symbols)

(Figure B)

Technical line drawing of a mechanical component or bracket (no text or symbols)

(Figure C) (Figure A)

Interior view of a car dashboard and steering wheel (no text or symbols visible)

(Figure D)

Line drawing of a car interior showing dashboard, rearview, and side profile (no text or symbols)

(Figure E)

DASH DISASSEMBLY(CONT.)

1. Remove (1) 7mm screw and remove the small trim next to the left center vent. (Figure F)
   Note: Next to the push-to-start button in some models.
2. Remove (2) 7mm screws from the radio/climate control panel, then unclip and remove the panel. (Figure G)
3. Extract (3) 7mm screws from each A/C vent and remove the vents. (Figure H)
4. Remove (4) screws securing th factory radio, disconnect the wiring, and then remove the radio. (Figure I)
5. Remove (2) 7mm screws and remove the CD player. (Figure J)

Continue to Kit Assembly

Technical line drawing of a vehicle's front and side components, showing a bracket and dashboard (no text or symbols)

Technical line drawing of a car dashboard and engine compartment (no text or symbols)

(Figure G)

Technical line drawing of a vehicle chassis with front and rear compartments (no text or symbols)

(Figure H) (Figure F)

Technical line drawing of an internal vehicle or automotive component with no visible text or symbols

(Figure 1)

Diagram of an automotive electronic panel with arrows indicating components (no text or labels)

(Figure J)

DASH DISASSEMBLY (CONT.)

If using the LD-LAN09-PIO:

1. Using the panel removal tool, unclip the plastic shroud around the steering wheel column. (Figure A)
2. Connect the LD-GMSWC to the 10-pin straight row connector located in the steering column.
3. Route the LD-GMSWC cable through the steering column into the dash and back towards the radio area.
4. Remove (3) bolts from the lower trim cover. Rotate the steering wheel to gain access to the bolts, then remove the forward facing bolts. (Figure B)

NOTE: If RPO is 105 or 106, use the LD-LAN09-PIO. If RPO is 10B, use the LD-LAN10-PIO.

Technical line drawing of a mechanical component with arrows indicating motion or assembly (no text or symbols)

(Figure A)

Technical diagram of a mechanical component with numbered parts and red annotations indicating features

(Figure B)

CONNECTIONS

graph TD
    A["External Speaker"] --> B["LD-AX-SPK"]
    B --> C["EXT SPRK"]
    C --> D["CAN 2"]
    C --> E["CAN5"]
    D --> F[""TBA" WIRKS"]
    E --> F
    F --> G["GPS"]
    G --> H["4-PIN"]
    G --> I["MIC"]
    G --> J["HDMI"]
    J --> K["ANT"]
    K --> L["Micro-HDMI ADAPTER NEEDED"]
    L --> M["AXUSB-GM6"]
    M --> N["AD-EOG"]
    N --> O["USB/AUX (USE INSTEAD)"]
    O --> P["ONNECTOR: CAMBI/DECT/CEXTE MSION"]
    P --> Q["AUX (INCL. W/RADIO)"]
    Q --> R["PRO4-PIORCA Low-Level"]
    R --> S["18P (M)"]
    R --> T["18P (F)"]
    S --> U["(I05 or I06) LOCATED AT HMI"]
    T --> V["LD-BACKCAM-MOST"]
    V --> W["Pioneer Harness"]
    W --> X["LD-GMLAN09-PIO"]
    X --> Y["PIONEER Harness"]
    Y --> Z["AXXESS INTERFACE"]
    Z --> AA["LOCATED AT STEERING COLUMN"]
    AA --> AB["LD-GNSWC"]
    AB --> AC["IF USING LD-LAM09-PIO"]
    AC --> AD["CONNECT LOOSE ENDED GREEN/BLACK"]
    AD --> AE["40-GPS-PIO"]
    AE --> AF["High-Level PRO4-AMIC-PIO"]
    AF --> AG["PRO4-PIORCA Low-Level"]
    AG --> AH["18P (M)"]
    AG --> AI["18P (F)"]
    AH --> AJ["(I05 or I06) LOCATED AT HMI"]
    AI --> AK["LD-BACKCAM-MOST"]

KIT ASSE MB LY

Double DIN radio provision

1. Attach the radio brackets to the radio trim panel with (4) #8 x 3/8" Phillips screws provided with this kit. (Figure A)
2. Slide the radio into the bracket trim panel assembly and secure with the screws supplied with the radio. (Figure B)
3. Clip the climate controls into the radio trim panel assembly.
4. Snap the climate control vents into the radio trim panel assembly.
5. Locate the factory wiring harness and antenna plug in the dash. Metra recommends using the proper mating adapters from Metra and/or AXXESS.
6. Complete all connections to the radio and vehicle, reconnect the negative battery terminal, and then test the aftermarket radio and vehicle for proper operation.
7. Mount the radio assembly into the dash using the factory screws.
8. Reassemble the dash in the reverse order of disassembly to complete the installation.

Technical line drawing of a vehicle chassis with structural components and mounting points (no text or labels)

(Figure A)

Technical line drawing of a vehicle chassis with labeled components and directional arrows (no text or symbols)

(Figure B)

RADIO OPERATIONS

Vehicle Selection

• Allows the selection of the vehicle the Pioneer radio is being installed in.
• Select Make, Model and Trim to activate the extended functions of the radio.
• The vehicle type must be selected to activate iPod, Bluetooth, backup cameras, as well as, HVAC functions and steering wheel controls.
• Press Confirm to lock in the selection.

Vehicle Selection Make No Selection Model Trim Save to Flash and Restart Confirm

Vehicle Selection Make: GMC Model: Yukon Trim: All Save to Flash and Restart Confirm

Car Features

The source for accessing all vehicle information and options.

Car Features HD Radio Bluetooth Audio iPod Browser AUX

HD Radio Bluetooth Audio USB iPod WiFi Audio HDMI Sens\\Om AUX Car Features Camera View Phone Settings Dimmer Drop OFF No Device Alexa Browser Sports Weather No Device Connectivity CarAVAssist

RADIO OPERATIONS (CONT.)

Customizations Menu : Allows full control of vehicle personalization options.

Access this menu by selecting the gear icon on the previous screenshot:

• Provides Steering Wheel Control (SWC) Configuration.
• Dual Assignment: Assign (2) functions to a single SWC button.
• Remap: Reassign a button on the SWC.

Customizations General Units Safety/Assistance Lights Doors & Locks

Climate Screen: HVAC Status only

Climate -60°F 59°F 59°F Auto Sync Dual A/C Max A/C

Vehicle Information Screen : The source for accessing all vehicle information and options.

Vehicle Information Ignition is Off Speed DMPH PKB Off Transmission State Park Compass Heading 0° Dimmer Value 0 Amplifier Type None Tire Pressure (psi) FL 0 FIR 0 RL 0 RR 0 Check Engine

Radio ID Screen : Feedback screen for interface software information. - Helpful information for troubleshooting.

Metra Information Interface HW Version: D Interface FW Version: B.56

AXPIO-STY1 INSTALLATION INSTRUCTIONS

Having difficulties? We're here to help.

Contact our Tech Support line at: 386-257-1187

Or via email at: [e-mail]

Tech Support Hours (Eastern Standard Time)

Monday - Friday: 9:00 AM - 7:00 PM

Saturday: 10:00 AM - 5:00 PM

Sunday: 10:00 AM - 4:00 PM

Metra recommends MECP certified technicians

Interior view of a car dashboard with air filters and control panels (no visible text or symbols)

COMPONENTES DEL KIT

Technical line drawing of a mechanical component or housing (no text or symbols visible)

Chevrolet Suburban/Tahoe 2015-2020

Diagram of a car interior showing dashboard and steering wheel (no text or symbols)

Diagram of a car interior showing dashboard, steering wheel, and dashboard panel (no text or symbols)

(Figura B)

Line drawing of a mechanical component or bracket (no text or symbols)

(Figura C) (Figura A)

Interior view of a car dashboard and steering wheel, showing engine compartment and directional arrows (no text or symbols)

(Figura D)

Line drawing of a car interior showing dashboard, air intake, and exhaust components (no text or symbols)

(Figura E)

DESMONTAJE DEL TABLERO (CONT.)

Technical line drawing of a vehicle's front and side components, showing a bracket and dashboard (no text or symbols)

Technical line drawing of a car dashboard and engine compartment (no text or symbols)

(Figura G)

Technical line drawing of a vehicle chassis with front and rear compartments (no text or symbols)

(Figura H) (Figura F)

Technical line drawing of an internal vehicle or automotive component with no visible text or symbols

(Figura I)

Diagram of an automotive electronic panel with arrows indicating components (no text or labels)

(Figura J)

DESMONTAJE DEL TABLERO (CONT.)

SI USA EL LD-LAN09-PIO:

Technical line drawing of a mechanical component with arrows indicating motion or assembly (no text or symbols)

(Figura A)

Technical diagram of a mechanical component with numbered parts and red annotations

(Figura B)

CONEXIONES

LD-AX-SPK ( N/A ) N/A EXTERNAL SPEAKER EXT SPKR CAN 2 CAN3 "TBA" WIRE5 4D-GPS-PIO GPS 4-PIN MIC HDMI ANT Micro-HDMI ADAPTER NEEDED AXUSB-GM6 AD-205 LD-LAM09-PIO LD-GMSWC LOCATED AT STEERING COLUMN *IF USING LD-LAM09-PIO CONNECT LOOSE ENDED GREEN/BLACK CONNECT TO CLIMATE PANEL 10P 10P CONNECT TO PLUG REMOVED FROM CLIMATE PANEL Pioneer Harness LD-GMLAN09-PIO High-Level PRO4-PIORCA Low-Level 18P (M) 18P (F) (105 or 106) LOCATED AT HMI LD-BACKCAM-MOST CAMERA (IOB) AUX (N/A) USB/AUX (USE INSTEAD) ONNECTOR: CAMBECTCEXTE NSION) Important: Revise la instalación de la cámara de reversa, el estatus de la climatización (HVAC), así como el control, los controles de audio al volante, al igual que la salida de la bocina externa antes de armar el tablero.

ENSAMBLE DEL KIT

Technical line drawing of a vehicle chassis with structural components and mounting points (no text or labels)

(Figura A)

Technical line drawing of a vehicle chassis with labeled components and directional arrows (no text or symbols)

(Figura B)

Vehicle Selection Make No Selection Model Trim Save to Flash and Restart Confirm

Vehicle Selection Make: GMC Model: Yukon Trim: All Save to Flash and Restart Confirm

Car Features HD Radio Bluetooth Audio iPod Browser AUX

HD Radio Bluetooth Audio USB iPod WiFi Audio HDMI Sens\\Om AUX Car Features Camera View Phone Settings Dimmer Drop OFF No Device Alexa Browser Sports Weather No Device Connectivity CarAVAssist

OPERACIONES DEL RADIO (CONT.)

Customizations General Units Safety/Assistance Lights Doors & Locks

Vehicle Information Ignition is Off Speed DMPH PKB Off Transmission State Park Compass Heading 0° Dimmer Value 0 Amplifier Type None Tire Pressure (psi) FL 0 FIR 0 RL 0 RR 0 Check Engine

Metra Information Interface HW Version: D Interface FW Version: B.56