99-5825S - Car stereo AXESS - Free user manual and instructions

USER MANUAL 99-5825S AXESS

INSTALLATION INSTRUCTIONS FOR PART 99-5825

APPLICATIONS

Ford Fiesta 2011-Up 99-5825S, 99-5825B

KIT FEATURES

• ISO DIN radio provision
• Driver information circuits and buttons
• Painted Silver or Matte Black to match factory finish

KIT COMPONENTS

• A) Radio Housing • B) Radio ISO Brackets • C) (6) #8 x 3/8" Phillips truss head screws

Interior view of a car dashboard with control panels and indicator lights (no visible text or symbols)

A

B

C

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: • XSVI-5524-NAV Ford interface 2011-up

Antenna Adapter: • 40-EU10 multi-app adapter

TOOLS REQUIRED

- Panel removal tool - Phillips screwdriver - Socket Wrench - Cutting Tool

Table of Contents

Dash Disassembly

— Ford Fiesta 2011-Up .... 2

Kit Assembly

- ISO DIN radio provision.... 3

NOTE: This kit comes pre-programmed for vehicles equipped with SYNC. It will not operate properly in vehicles equipped without SYNC unless it is programmed.

Programming for vehicles without SYNC:

1. Turn on the ignition.
2. Press and hold the kit's menu button for ten seconds.
3. Release the menu button and test the kit's buttons for proper operation.

CAUTION: Metra recommends disconnecting the negative battery terminal before beginning any installation. All accessories, switches, and especially air bag indicator lights must be plugged in before reconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the aftermarket radio.

99-5825

Dash Disassembly

1. Unsnap and remove the panel over the display at the top of the dash. (Figure A)
2. Remove two 7 mm hex screws from the top of the radio panel. (Figure B)
3. Unclip and remove the radio trim panel including the vents. (Figure C)

Interior view of a car dashboard and steering wheel (no text or symbols visible)

(Figure A)

Interior view of a car dashboard and air conditioning unit (no visible text or labels)

(Figure B)

Diagram of a car interior showing dashboard, steering wheel, and dashboard-mounted device (no text or symbols visible)

(Figure C)

1. Remove two 7 mm hex holding radio and radio chassis together (from top of panel). (Figure D)
2. Remove two T-20 Torx and unclip the two vents from the factory radio panel. (Figure E)
3. Remove two T-20 Torx from passenger airbag light and remove it. (Figure E)
4. A small cut is required in the sub dash for clearance. (Figure F)
   Continue to kit assembly

Technical diagram of a car headgear component with arrows indicating motion or force (no text or symbols)

(Figure D)

Technical line drawing of a vehicle chassis with structural components and mounting points (no text or labels)

(Figure E)

Line drawing of a car interior showing the dashboard and seat area (no text or symbols)

(Figure F)

99-5825

Kit Assembly

1. Snap the factory vents into the radio panel. (Figure A)

2. Mount the ISO brackets to the head unit with the screws supplied with the unit. (Figure B)

3. Mount the radio bracket assembly to the radio panel using the supplied screws. (Figure C)

4. Mount the factory airbag indicator to the Radio Panel using the supplied screws. (Figure A)

5. Locate the factory wiring harness and antenna plug in the dash. Metra recommends using the proper mating adapters from Metra and/or AXXESS.

6. Reassemble dash in reverse order of disassembly.

NOTE: This kit comes pre-programmed for vehicles equipped with SYNC. It will not operate properly in vehicles equipped without SYNC unless it is programmed.

Programming for vehicles without SYNC:

1. Turn on the ignition.
2. Press and hold the kit's menu button for ten seconds.
3. Release the menu button and test the kit's buttons for proper operation.

Technical line drawing of a device with labeled ports and connectors (no text or symbols present)

(Figure A)

Diagram of a car dashboard and its internal components (no text or symbols)

(Figure C)

Technical diagram of a vehicle chassis frame with structural components and directional arrows indicating movement (no text or labels)

(Figure A)

INSTALLATION INSTRUCTIONS FOR PART 99-5825

KNOWLEDGE IS POWER

Enhance your installation and fabrication skills by enrolling in the most recognized and repurposed.

enrolling in the most recognized and resp. mobile electronics school in our industry.

Log onto www.installerinstitute.com or call

800-354-6782 for more information and take steps toward a better tomorrow.

Metra recommends MECP

certified technicians

Interior view of a car dashboard with air conditioners and steering wheel (no visible text or symbols)

A

B

C

Diagram of a car dashboard and steering wheel (no text or symbols)

(Figura A)

Interior view of a car dashboard and steering wheel (no text or symbols visible)

(Figura B)

Diagram of a car air intake manifold showing airflow direction (no text or labels)

(Figura C)

Technical line drawing of a vehicle headgear component with arrows indicating motion or assembly (no text or symbols)

(Figura D)

Technical line drawing of a mechanical assembly with no visible text or symbols

(Figura E)

Technical line drawing of a car interior showing internal components (no text or symbols)

(Figura F)

99-5825

Ensamble del kit

Technical line drawing of an electronic device with ports and connectors (no text or symbols)

(Figura B)

Line drawing of a car interior and its external device (no text or symbols)

(Figura C)

Technical line drawing of a vehicle chassis frame with no visible text or symbols

(Figura A)