BB20FRGPNLA - Baby product Kogan - Free user manual and instructions

USER MANUAL BB20FRGPNLA Kogan

Illustration of a green and gray children's playroom with cartoon frogs and decorative icons (no text or symbols)

INTERACTIVE 20-SIDED BABY PLAYPEN

BB20FRGPNLA

SAFETY & WARNINGS

Warning

• This product should be assembled by an adult.
- Keep away from fire or any source of ignition.
• Ensure the installation area is ventilated.
• Place in a well-lit room.
• Do not use the product upside down.
- Check that all parts are assembled well and are stable before use.
- Packing materials are not toys, keep them away from children.
• The recommended age for the product usage is 3 months - 6 years.
- Supervise children while they are playing inside the playpen. Do not allow them to climb the playpen.

Surface Recommendations

Do not place on the sand surface or uneven ground

Cartoon illustration of a green, anthropomorphic creature with large eyes and raised hands, standing on water (no text or symbols)

Do not place on a slope

Cartoon illustration of a green, anthropomorphic creature with large eyes and raised hands (no text or symbols)

Do not place in water or water seepage

Illustration of a cartoon frog character standing on a boat with waves below (no text or symbols)

Place on a flat, spacious floor

Illustration of a cartoon frog character with large eyes and limbs (no text or symbols)

COMPONENTS

Cartoon frog character with large eyes and a smile, enclosed in a frame (no text or symbols)

Door Panel (x1)

Illustration of a cartoon frog face with green body and pink mouth, enclosed in a gray frame (no text or symbols)

Two plastic door lockers with cutouts, one green and one light gray, side by side (no text or symbols)

Small Panels (x18)

Illustration of a green device with circular components and floating colored spheres (no text or symbols)

Game Panel with Sound Elements (x1)

Two plastic electronic components with internal holes, one open and one closed (no text or symbols visible)

Base Connectors (x20)

INSTALLATION

Step 1

Insert a small panel into a base connector.

Two plastic electronic components: a green plastic device with cutouts and a white rectangular housing (no text or symbols visible)

Step 2

Align a second small panel parallel with the first small panel.

Insert the second small panel into the base connector and at the opening of the first small panel as shown in the image.

Ensure the small panels are fixed firmly.

Three plastic mechanical components with cutouts and mounting holes, shown in green and gray views (no text or symbols)

Step 3

Repeat step 2 to attach the remaining small panels and the base connector.

Attach the door panel and game panel by following the step 2 instructions to complete the playpen as shown in the image.

Ensure the playpen is properly installed and firmly fixed on the surface before use.

Illustration of a green and gray children's playroom with cartoon frog faces (no text or symbols)

Step 4

To open the door panel, slide the lock to the right. To close the door panel, slide the lock to the left.

Cartoon illustration of a green frog character with large eyes and a smile, standing inside a gray frame (no text or symbols)

Diagram of a device with colored components and directional arrows, no readable text or symbols

Note: Each panel will be connected to a base connector with a suction cup. This enables the playpen to stand firmly.

Tips:

• To increase the stability of the playpen, ensure to fix firmly.
- Check regularly whether the small panels are attached firmly on the surface.
- Ensure to disassemble the playpen carefully and gently.

CLEANING & CARE

• Clean the suction cups regularly.
• Use sponge and soapy water or other non-corrosive cleaning agents to clean the product.

TROUBLESHOOTING

The suction cups of base connectors are not sticking.	The surface may be rough. Ensure to assemble the playpen on a smooth flat surface so that the suction cup can stick firmly on the surface.See the Safety & Warnings section of this user guide.
	If there is any debris on the suction cups, clean them with water.
	If the suction cups have poor suction capability, soak it in boiling water and then paste it on the smooth flat surface when it is hot.

SPECIFICATIONS

Product Size (in mm)

415 35 415 620 664 787 75 620 787

Need more information?

We hope that this user guide has given you

the assistance needed for a simple set-up.

For the most up-to-date guide for your product, as well as any additional assistance you may require,

head online to help.kogan.com

kogan.com