IFC-610S - Toaster Imarflex - Free user manual and instructions
Find the device manual for free IFC-610S Imarflex in PDF.
User questions about IFC-610S Imarflex
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Toaster in PDF format for free! Find your manual IFC-610S - Imarflex and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IFC-610S by Imarflex.
USER MANUAL IFC-610S Imarflex
The New Generation of Cooling Fans
10" PATENTED TURBINE BLADE DESIGN
airlonizer
30%
Increase Air Circulation
Reduces Cooling Time & Energy Consumption
natural_image
Black industrial fan with circular vent and handle, no visible text or symbols on the device itself.SPECIFICATION
MODEL NO. : IFC-610S
RATED VOLTAGE : 230Va.c. \~ 60Hz
POWER CONSUMPTION : 60 Watts T
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed, including the following:
- Read all instructions carefully before use.
- Check the condition of the unit after taking out from the box. Ensure that all parts are in good condition.
- Before using the unit, check if the voltage indicated corresponds with the convenience outlet (230Va.c.).
- Do not use any appliance with a damaged cord or plug. If the cord is damaged it should be replaced with the same type and size or bring the unit to the nearest authorized service center.
- Do not attempt to repair, adjust or replace parts in the unit. It must be check and repair by an Authorized Imarflex Technician or by similar qualified persons in order to avoid electric hazard.
- Do not place the unit near gas stove or electric stove.
- Children should be supervised to ensure that they do not play with the appliance.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliances by a person responsible for their safety.
- This unit must only be used for room ventilation. Do not use in bathrooms.
- Do not insert any object into the Fan Guard.
- Do not use the plug to stop or start the operation of the unit, use the Speed Control Knob.
- To prevent the risk of electric shock do not operate the unit by wet hands.
- For household use only.
- Save this instruction manual for future reference.
FEATURES AND FUNCTIONS
Air circulator acts as a flow-straightener and further assists in focusing the outward stream of air into tight cyclone airflow.
- Summer: The cyclone air hits a wall across the room roughly halfway to decrease the room temperature.
- Rainy: This forces the hot air of the ceiling and mixes it with the cooler air resulting in an even room temperature.
- Ionizer: It releases a negative ion to purify the circulating air inside the room.
APPLICATION
text_image
2-Room Air CirculationBase on hot air rises and cool air falls of aerodynamic.
DESCRIPTION OF PARTS
text_image
FRONT FAN GUARD FAN BLADES (INSIDE) CONTROL KNOB REAR FAN GUARD HEAD TILT HOLDER MOTOR (INSIDE) FASTENING SCREW HEIGHT ADJUSTMENT LOCK ADJUSTABLE STAND PIPE WITH THREAD BASEHOW TO USE
- Please make sure the Speed Control Knob is in "0" position.
- Plug the unit into the convenience outlet (230Va.c.).
- SPEED ADJUSTMENT – the speed can be adjusted by turning the Speed Control Knob to the desired setting:
| 0 | Fan is switched off |
| 1 | Low range speed of the fan (weak air flow) |
| 2 | Medium range speed of the fan (medium air flow) |
| 3 | High range speed of the fan (strong air flow) |
- HEAD TILT ADJUSMENT – this is equipped with a 90° tilt head for whole room air circulation.
- HEIGHT ADJUSTMENT – this unit can be adjusting the height by turning the Height Adjustment Lock counter clockwise and pull-up/push-down to desired height then turn the Height Adjustment Lock clockwise to fix the height.
- IONIZER - it will automatically turn on if the unit is ON.
CLEANING AND MAINTENANCE
- Always unplug the unit from the convenience outlet before disassembling the unit.
- Unscrew and remove the Front Fan Guard. (See fig.1)
- Clean the Rear Fan Guard with damp cloth. Wash the Front Fan Guard and Fan Blade with soap and water then rinse thoroughly.
- Use vacuum or soft brush to clean the dust on the motor.
- After cleaning return the Front Fan Guard and tighten the screws. (See fig. 2)
- Wipe the Base with damp cloth.
- Do not immerse the unit in water or other liquids.
Fig. 1
Fig. 2