ES-7246POE - Router Comtrend - Free user manual and instructions
Find the device manual for free ES-7246POE Comtrend in PDF.
User questions about ES-7246POE Comtrend
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Router in PDF format for free! Find your manual ES-7246POE - Comtrend and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ES-7246POE by Comtrend.
USER MANUAL ES-7246POE Comtrend
Understanding the PoE+ Switch
text_image
COMTREND ES-7246PoE 8-Port PoE+Lite-Smart FE Switch PoE Power Budget Full 75% 50% 25% <15.4W(Amber) Link/Act PoE PoE LED ON/OFF Power System 2 4 Fast Ethernet 6 8 Link/Act 9 10 Gigabit 9 10 Fig. Front Panel of ES-7246PoE
Plug and Play Setup
√ Power on the Switch:
Power on the Switch before plugging in any Ethernet cables, the system will go through a Power-On-Self-Test (POST) with the LEDs lighting Green or Amber in color. After completing the POST, the LEDs will remain in a lit state as indicated in the table below.
| LED Indication | Color / State | Description | |
| Power | Green On | The device is powered on. | |
| PoE Power Budget | Full | Green On | Available POE power is as indicated. |
| 75% | Green On | ||
| 50% | Green On | ||
| 25% | Green On | ||
| System | Amber On | Device passed POST and ready for login. | |
√ Plug in the Ethernet cables:
The ES-7246PoE switch will automatically communicate with devices that support PoE standard IEEE 802.3af/at. Use the "PoE Power Budget" LED indicators on the front panel to visualize the PoE Power Budget Remaining.
| LED Indication | Color / Status | Description | |
| PoE Power Budget | LED Full, 75%, 50%, 25% | (4 LEDs)Green On | No PoE Power Budget is consumed. |
| LED 75%, 50%, 25% | (3 LEDs)Green On | 100 % > remaining PoE Power Budget >= 75% | |
| LED 50%, 25% | (2 LEDs)Green On | 75 % > remaining PoE Power Budget >= 50% | |
| LED 25% | Green on | 50 % > remaining PoE Power Budget >= 25% | |
| LED 25% | Amber On | 25 % > remaining PoE Power Budget >= 15.4W | |
| LED 25% | Amber Blinking | PoE Power Budget remaining is <15.4W | |
text_image
COMTREND ES-7246PoE 8-Port PoE+Lite-Smart FE Switch PoE Power Budget Full 75% 50% 25% <15.4W(Amber) Link/Act PoE PoE 9 Link/Act 9 10 Gigabit 10 LED ON/OFF Power SystemFig. Front Panel of ES-7246PoE
√ Power on the Switch:
Power on the Switch before plugging in any Ethernet cables, the system will go through a Power-On-Self-Test (POST) with the LEDs lighting Green or Amber in color. After completing the POST, the LEDs will remain in a lit state as indicated in the table below.
| LED Indication | Color / State | Description | |
| Power | Green On | The device is powered on. | |
| PoE Power Budget | Full | Green On | Available POE power is as indicated. |
| 75% | Green On | ||
| 50% | Green On | ||
| 25% | Green On | ||
| System | Amber On | Device passed POST and ready for login. | |
√ Log into the Switch:
Connect a PC to any port of the Switch. Make sure the LAN setting of the PC are set to work in the same subnet as the Switch. The Switch has a default IP address of 192.168.2.1. Type the IP address of the Switch (Default IP address is 192.168.2.1) in the WEB Browser of the PC. You will then be prompted to enter an ID and Password so that you can log into the Switch. The default ID is "admin" and the default Password is "system". Press "OK" to login. You will see the welcome page with "System Information".
text_image
COMTREND ES-7246PoE B-Port PoE+Lite-Smart FE Switch LED ON/OFF Power System <15.4W(Anbar) PoE Power Budget Full 75% 50% 25% 2 Link/Act PcE PcE Link/Act 10 Gigabit 10 System Information Static IP | IP Address : 10.10.2.1 | Subnet Mask: 255.255.255.0 | Gateway : 10.10.2.254 System MAC address : 10:10:13:10:06:98 : | Port Definition : 8 Fast Ethernet + 2 Gigabit Ethernet Combo | System Description : SW-XE1010CE | | Firmware Version : SW-XE1010CE_WebCtrl_v1.0B01 | Web Configuration Never logout PoE Configuration System PoE Operation Status : On | System PoE Operation Temp : 51 C Max PoE Power Budget : 90 W | Current PoE Power Consumption : 0 W PoE Port | Status | Mode | Class | Priority | Power Consumption(Watt) 1 | Enable | 802.3at | - | 3 | 0 2 | Enable | 802.3at | - | 3 | 0 3 | Enable | 802.3at | - | 3 | 0 4 | Enable | 802.3at | - | 3 | 0 5 | Enable | 802.3at | - | 3 | 0 6 | Enable | 802.3at | - | 3 | 0 7 | Enable | 802.3at | - | 3 | 0 8 | Enable | 802.3at | - | 3 | 0 Basic Configuration STP Mode : Disable | Root Bridge ID : - VLAN Mode : Port Base VLAN | QOS Priority : First-In-First-Out | IGMP Snooping : Disable | Loopback Detection : Disable | Auto Wake up : Disable | Wake-Up Time Interval : 10 SecsFig. Web Page of "System Information"
√ This page displays most of the important information that may be needed for Installers or Network Administrators. Select on icon of the left panel to configure those features.
Setup for IP Surveillance
text_image
COMTREND ES-7246PoE 8-port PoE+Lite-Smart FE Switch LED ON/OFF Power System PoE Power Budget Full 75% 50% 25% <15.4W(Ambor) Link/Act PoE PoE Link/Act 9 10 Gigabit 10 VLAN Mode IP Surveillance Base VLAN Mode IP Surveillance VLAN Apply Note: Change VLAN mode will reset VLAN setting to default. COMTREND ES-7246PoE 8-port PoE+Lite-Smart FE Switch LED ON/OFF Power System PoE Power Budget Full 75% 50% <15.4W(Ambor) Link/Act PoE PoE Link/Act 9 10 Gigabit 10 PORT VLAN QoS Loop Free Trunking VLAN Mode IP Surveillance Base Destination Port : 09 ✓ 10 ✓ Source Port : 01 02 03 04 05 06 07 08 ✓ Update Port 1 Port 2 Port 3 Port 4 Port 8 Port 9 Port 10 NVR PC IP CamerasFig. IP Surveillance Quick Setup
√ IP Surveillance Quick Setup only 3 steps are necessary to complete your surveillance network installation.
Step 1: Connect the IP Camera, NVR, and PC as "Figure. IP Surveillance Quick Setup"
Step 2: Enable and Apply "IP Surveillance VLAN"
Step 3: Start the "Discover Surveillance Device"
Once completed, all Comtrend Surveillance Cameras will be securely bound and all the surveillance video will flow securely to ports 9 and 10 on the Switch.
What is IP Surveillance VLAN?
Enabling IP Surveillance VLAN will forward the video streams from ports 1-8 directly to the uplink ports 9 & 10. Source ports 1-8 are not allowed to communicate to each other. This is to prevent network snooping.
What is Discover Surveillance Device?
Use this feature to initiate the discovery process to find and setup the connected Comtrend surveillance devices.
After discovered IP Camera (generally with default IP address 192.168.2.1), automatically its IP setting will be modified to ensure all IPCAMs and Switch are in the same working subnet. See result from page "Security" →" MAC + Port Binding".
Furthermore, Security feature will be also enabled, MAC + Port Binding prevent IPCAM device from malicious replacement.
FOR MORE HELP: For instructions on advanced features, FAQs, etc., please visit our online Product Webpage: http://us.comtrend.com/products/public/product/service-provider/es-7246poe.html
For more information:
Facebook: https://facebook.com/Comtrend
Website: http://us.comtrend.com/
Support: Visit our website or call 1-877-COMTREND (1-877-266-8736)
