RR1332DX - Oven Cres Cor - Free user manual and instructions

USER MANUAL RR1332DX Cres Cor

Retherm Oven	FL-2391
Rev. 0 (4/16)	Page 1 of 14

INSTALLATION, OPERATION and MAINTENANCE MANUAL for Cres Cor QUIKTHERM™ RETHERM ROLL-IN OVENS WITH RACK 18,000, 12,000 or 8,000 WATTS

Exterior view of a stainless steel industrial oven with metal racks and open door (no visible text or symbols)

RR1332DE

RR1332DE8K

RR1332DX

RR1332DX8K

RR1332DE12K

RR1332DX12K

Retherm Oven	FL-2391
Rev. 0 (4/16)	Page 2 of 14

CRES COR®

5925 Heisley Road • Mentor, OH 44060-1833

TABLE OF CONTENTS

SUBJECT

INSTALLATION INSTRUCTIONS 3

OPERATING INSTRUCTIONS

First Time Operation....3

How to Use Control for Cooking & Holding:

For “-DE” Series Ovens .... 4

For “-DX” Series Ovens....5

“Recipes” for “-DX” Series Ovens....6

MAINTENANCE INSTRUCTIONS

How to Clean the Unit ....7

Trouble Shooting Guide 8,9

Oven Replacement Parts 10

Hot Unit Replacement Parts....11

Wiring Diagram for 208/240 Volt, 3 Phase .....12

Wiring Diagram for 480 Volt, 3 Phase .....13

Wiring Diagram for 208/240 Volt, 1 Phase .....14

SERVICE POLICY and AGENCY LIST....FL-1400

REGISTERING YOUR EQUIPMENT AT www.crescor.com/service/register COMPLETING A SURVEY EARNS AN EXTRA 90-DAY LABOR WARRANTY!

If the equipment will not go into service immediately, please indicate that on the warranty registration. Scan QR code to register your equipment today! If you need a QR reader, visit your App Store on your Smartphone or Tablet.

WARNING RISK OF FIRE OR ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REPAIR SHOULD BE DONE BY AUTHORIZED SERVICE PERSONNEL ONLY

Retherm Oven	FL-2391
Rev. 0 (4/16)	Page 3 of 14

INSTALLATION INSTRUCTIONS

VENTING YOUR OVEN:

1. The purpose of ventilating hoods is to direct and capture smoke, grease-laden vapors, heat, odors, or fumes.

2. Low temperature equipment (maximum temperature 250^ F/121°C) does not produce heat, odors, fumes, grease-laden vapors or smoke and is not required to be vented.

3. Most jurisdictions consider our low-temperature ovens (maximum temperature is 350^ F/177°C) as low-heat appliances not requiring vent hoods.

4. Installation must conform with local codes. The authority having jurisdiction of enforcement of the codes will have the responsibility for making interpretations of the rules.

UNIT SPECIFICATIONS: Units below use six (6) elements (3000 watts each). Units are rated 18,000 watts.

MODEL NOS.	ELECTRICAL SPECS(AC SERVICE)			ELEC. LOAD		POWER SUPPLY REQUIREMENTALL 3 PHASE IS 3 WIRE + GROUND
	VOLTS P	PHASES HZ	AMPS VOLT	TS AMPS PH	ASES VOL	TS RECEPT	ACLE
RR1332DE(DX)2083 208 3	60 50 208	60 3 208 15	-60R
RR1332DE(DX)2403 240 3	60 44 240	60 3 240 15	-60R
RR1332DE(DX)4803 480 3	60 22 480	30 3 480 L1	6-30R
UNIT SPECIFICATIONS: Units below use six (6) elements (2000 watts each). Units are rated 12,000 watts.
RR1332DE(DX)12K2083 208	3 60 34	208 50 3 20	8 15-50R
RR1332DE(DX)12K2403 240	3 60 29	240 50 3 24	0 15-50R
RR1332DE(DX)12K4803 480	3 60 15	480 30 3 48	0 L16-30R
UNIT SPECIFICATIONS: Units below use six (6) elements (1325 watts each). Units are rated 8,000 watts.
RR1332DE(DX)8K2081	208 1 6	0 40 208 5	0 1 208	6-50R
RR1332DE(DX)8K2401	240 1 6	0 35 240 5	0 1 240	6-50R

All models are designed for AC Service. Model numbers may have the letters: Z or S.

HOW TO CHANGE FROM °F TO °C (if needed)

1. Push the switch on; the light will come on.
2. Push and hold the "SET" button and the button in the lower left hand corner together for 5 seconds. You have now entered into the menu.
3. Scroll over the "Unit" and change it to "C", then scroll to the "END".

HOW TO INSTALL OVENS:

1. Remove all packing material from inside and outside of oven.
2. Position oven on level floor.
3. After shipping, you may have to adjust legs to ensure proper fit of rack into cabinet.
4. Plug power cord into proper wall receptacle.

NOTE: A new oven needs to "burn off" manufacturing oils and excessive adhesive before its first use. Do NOT load food into oven until this has been done!

1. Push the switch to on; the light will come on.

NOTE: The letters "LOtPr" (low temperature) will show on the control panel until it reaches 140°F (60°C).

1. Press the "COOK" button.
2. Turn the control knob to show 350^ F. Push the knob 3 times to heat the unit. Run the unit like this for one (1) hour.
3. Turn the unit off and let cool.
4. Wipe the inside clean with detergent and hot water.

Retherm Oven	FL-2391
Rev. 0 (4/16)	Page 4 of 14

OPERATING INSTRUCTIONS

CRES COR. 350°F QuikTherm™ Retherm PWM HOLD TIME DISPLER START CANES

HOW TO USE THE RETHERM CONTROL:

*Push the lighted switch on the control panel; the oven will start heating and stay in HOLD mode.

*The display will read "LOTPR" (low temperature) below 140°F. (60°C.).

*Push the Air Retherm Switch to "HIGH" for retherming food; Use "LOW" for cooking.

NOTES: Preheat for one (1) hour after start up before loading the food for best results when retherming or cooking heavy loads. If a power outage occurs or the cabinet is shut off during a cook cycle, when it is turned on again all lights on the control will flash to indicate a disruption. Control will resume the last cook cycle used. Press any button to stop the blinking.

If your model does not have a food probe, continue to section "-DE OVENS" below.

If your model has a food probe, skip to section "-DX OVENS" on page 5.

-DE OVENS:

Cooking:

1. Press the COOK button.
2. Turn the control knob to the desired cooking temperature between 180°F (82°C) and 350°F (176°C).
3. Push the knob to set the temperature.
4. The control automatically switches to allow you to set HOLD temp. (Continue to step 1 below).

Holding:

(To use as holding cabinet only, skip steps 1-4 above and press HOLD button. Complete steps 1-3 below.)

1. Turn the control knob to the desired holding temperature between 135^ F ( 57^ C) and 220^ F ( 104^ C).
2. Push the knob to set the temperature.
3. The control automatically switches to allow you to set cook time.

Setting the Timer:

1. Turn the control knob to the desired hours/minutes.
2. Push the knob to set the time.
3. The control automatically switches to PREHEAT mode and will display "PrEHt"

Running the Cycle:

1. The control will flash "PUSH StArt" after the cabinet has preheated to the set temp and the alarm will sound.

NOTE: A short beep will occur every 90 seconds as a reminder. This can be turned off in the user menu by holding the knob and the TIME buttons together for 5 seconds, then scrolling to "PSrE", changing "y" to "n", scrolling to "End", and pushing the knob to set.

1. Load foods into oven and close the door.
2. Push the START button to begin the Retherm/Cook process. Display will change between the setpoint temperature and the countdown of the timer.
3. The alarm will sound after the time is done and the oven will switch back into HOLD mode. The timer will now count up, showing how long the food has been holding.

NOTE: This equipment is intended for storage and display of packaged products only. Cold food cannot be inserted for rethermalization while hot food is being held.

OPERATING INSTRUCTIONS (continued)

CRES COR. 350F⁵ WOLD QUikTherm™ Retherm TIME PRIOR RECIP SUPPORT START CANCEL AIR RETERM HIGH LOW

-DX OVENS

Cooking:

1. Press the COOK button.
2. Turn the control knob to the desired cooking temperature between 180^ F ( 82^ C) and 350^ F ( 176^ C).
3. Push the knob to set the temperature.
4. The control automatically switches to allow you to set HOLD temp. (Continue to step 1 below).

Holding:

(To use as holding cabinet only, skip steps 1-4 above and press HOLD button. Complete steps 1-3 below.)

1. Turn the control knob to the desired holding temperature between 135^ ( 57^ C) and 220^ F ( 104^ C).
2. Push the knob to set the temperature.
3. The control automatically switches to allow you to set cook time.

If cooking with timer, continue to step 1 below. If cooking with food probe, skip to section "Cooking with Food Probe".

Cooking with Timer:

1. Turn the control knob to the desired hours/minutes. Oven will switch from COOK to HOLD mode when this time is done.
2. Push the knob to set the time.
3. Oven will switch to PREHEAT mode and control will display "PrEHt".

Cooking with Food Probe:

NOTE: Make sure probe was plugged in after step 1 of Holding above. If not, press the PROBE button and continue to next step below.

1. Turn the control knob to the desired temperature. The oven will switch from COOK to HOLD mode when the probe reaches this temp.

2. Push the knob to set the temperature.

3. Oven will switch to PREHEAT mode and control will display "PrEHt".

Running the Cycle:

1. The control will flash "PUSH StArt" after the cabinet has preheated to the set temp and the alarm will sound.
   NOTE: A short beep will occur every 90 seconds as a reminder. This can be turned off in the user menu by holding the knob and the TIME buttons together for 5 seconds, then scrolling to "PSrE", changing "y" to "n", scrolling to "End", and pushing the knob to set.

2. Load foods into oven, insert probe (if applicable) and close the door.

3. Push the START button to begin the Retherm/Cook process.

a. If cooking with timer, display will alternate between the setpoint temperature and the countdown of the timer.
b. If cooking with probe, display will show the probe temp.

1. The alarm will sound after the time is done and the oven will switch back into HOLD mode. The timer will now count up, showing how long the food has been holding.

NOTE: At any time, the CANCEL button can be pushed to return the oven back to HOLD mode at the previous set temperature.

The DISPLAY button shows (cycles through) all the values when in each mode:

• “PrEHt” or “PUSH StArt”: Momentarily shows actual oven temperature.
• "COOK (timed)": Shows home screen, set point, count down time, actual oven temperature.
• "COOK (probe)": Shows home screen, set point, count up time, actual oven temperature.
• "HOLD": Shows home screen, set point, count up time, actual oven temperature.

Retherm Oven	FL-2391
Rev. 0 (4/16)	Page 6 of 14

OPERATING INSTRUCTIONS (continued)

CRES COR. 350F⁵ HOLD QUikTherm™ Retherm TOMI PRIXN RECIPR EXPLANET START CANCEL RUN RETURN ON LOW

-DX OVENS, continued

RECIPES:

The -DX control can hold up to 18 saved recipes.

To save a recipe:

1. Press the RECIPE button.
2. Turn the knob through the menu until you get to "Edit" and press the knob.
3. Turn the knob to reach the recipe you want to edit. There are 18 blank recipes to customize and save.
4. Press the knob and enter the cook, hold and time values.
5. After the entering the final value, "Edt" will show again, allowing you to edit another recipe.
6. Press the knob to edit more recipes or turn to "End" to exit the menu.

To use one of the recipes:

1. Push the RECIPE button.
2. Turn the knob to the desired recipe; "rcP01", "rcP02", "rcP03", etc.
3. Push the set button to select and start the preset process. Unit will begin to preheat.
4. Run the cycle as described above by pressing START button after oven has preheated.

Note: The display button will cycle through all the values as before, but will include the recipe number, if using a saved recipe.

Additional Menu Settings:

Press and hold both the TIME button and the knob for 5 seconds to get into the menu.

Here you can set the recipes, temperature units (°C or °F), PUSH START reminder and the datalog settings (USB connection required):

"RECE" allows you to enable or disable the data record feature.

"RECF" allows you set how often (in minutes) a datapoint will be recorded.

"RECD" allows you to set how long (in days) you would like the data to be stored in memory.

Retherm Oven	FL-2391
Rev. 0 (4/16)	Page 7 of 14

MAINTENANCE INSTRUCTIONS HOW TO CLEAN THE UNIT

WARNING

BEFORE cleaning the cabinet:

1. Unplug cord from wall. Allow cabinet to cool.
2. Do NOT hose cabinet with water. Rack can be hosed down with water & detergent.
3. Do NOT get water on controls.
4. Do NOT use abrasives or harsh chemicals.
5. Do NOT use "Cres Clean" (or any citrus cleaner) on labels or plastic parts.

Cleaning Hints:

1. Use the mildest cleaning procedure that will do the job.

2. Always rub in the direction of the polish lines to avoid scratching the surface.

3. Use only a soft cloth, sponge, fibrous brushes, plastic or stainless steel pad for cleaning and scouring.

4. Rinse thoroughly with fresh water after every cleaning operation.
5. Always wipe dry to avoid water marks.

HOW TO CLEAN THE UNIT:

	SOIL CLEANER METHOD
RACK and CABINETInside and Outside(Stainless Steel)	ROUTINE CLEANING	Soap, ammonia or mild detergent* and water.	1. Sponge on with cloth2. Rinse
	STUBBORN SPOTS, STAINS	Mild abrasive made for Stainless Steel.	1. Apply with damp sponge or cloth.2. Rub lightly.
	BURNT ON FOODS OR GREASE	Chemical oven cleaner made for Stainless Steel.	Follow oven cleaner manufacturer's directions.
	HARD WATER SPOTS & SCALE	Vinegar	1. Swab or wipe with cloth.2. Rinse and dry.
*Mild detergents include soaps and non-abrasive cleaners

Retherm Oven	FL-2391
Rev. 0 (4/16)	Page 8 of 14

MAINTENANCE INSTRUCTIONS TROUBLE-SHOOTING GUIDE, continued

HOW TO ADJUST THE DOOR LATCH:

1. For vertical (up and down movement) adjustment:

a. Loosen (2) screws located in magnetic strike.
b. Move strike up or down for alignment to magnet on latch.
c. Tighten screws to secure

1. For horizontal (greater or lesser magnetic draw) adjustment:

a. Loosen (4) screws in door latch.
b. Move latch forward or backward to adjust magnetism.
c. Tighten screws to secure.

TROUBLE-SHOOTING GUIDE

WARNING

IF OVEN GETS TOO HOT OR WON'T SHUT OFF, DISCONNECT POWER AT BRANCH PANEL. DO NOT UNPLUG CORD!

If unit is NOT working, first check the following causes:

1. Cord is unplugged from wall outlet.
2. Switch is turned off.
3. Circuit breaker/fuse to wall outlet is blown.
4. Fuse on back of unit is blown.

NOTE: Vent fans will not operate until the control compartment requires ventilation to limit temperatures. Replacement of electrical components must be done by a qualified electrician.

Refer to our Service Agency list, FL-1400 of authorized service centers. Instructions for replacing parts are included in replacement parts list.

Retherm Oven	FL-2391
Rev. 0 (4/16)	Page 9 of 14

MAINTENANCE INSTRUCTIONS TROUBLE-SHOOTING GUIDE (continued)

PROBLEM POSSIBLE CAUSE SOLUTION
Oven does not turn on	1. Power switch is bad2. Retherm control is bad.	1. Replace2. Replace

IF THE OVEN TURNS ON:

PROBLEM POSSIBLE CAUSE SOLUTION
Oven does not heat, or doesn't heat properly	1. Sensor2. Heater contactor3. Loose wiring at heater contactor4. Retherm control5. High Limit	1. Replace2. Replace3. Replace4. Replace5. Replace
Blowers do not operate	1. Air retherm switch2. Blower3. Retherm control	1. Replace2. Replace3. Replace
Heater will not shut off	1. Control defective2. Heater contactor	1. Replace2. Replace
Vent fans do not shut off	1. Vent fan switch defective2. Control compartment is still hot.	1. Replace2. Wait until it coolsCheck “Heater will not shut off”
Vent fans do not operate	1. Vent fan switch defective2. Vent fan defective	1. Replace2. Replace
Control will not switch from “COOK” to “HOLD” (timed mode)	1. Oven is in “PROBE” mode (“DX” oven).2. Retherm control defective	1. Cancel recipe and switch to “TIMED” mode2. Replace
Control will not switch from “COOK” to “HOLD” (probe mode in “DX” oven only)	1. Oven is in the “TIMED” mode2. Probe not plugged in3. Probe defective4. Retherm control defective	1. Cancel recipe and switch to “PROBE” mode2. Plug in probe3. Replace4. Replace
Control will not switch to “COOK” (probe mode in “DX” oven only)	1. Oven in “TIMED” mode2. Probe temperature setting lower than probe temperature3. Probe not plugged in4. Retherm control defective	1. Switch to “PROBE” mode2. Set probe temperature to desired temperature3. Plug in probe4. Replace

ERROR CODES:

CODE DISPLAYED CAUSE SOLUTION
no p No meat probe Plug in probe
Err0 Temp probe bad Replace

Retherm Oven	FL-2391
Rev. 0 (4/16)	Page 10 of 14

CRES COR®

5925 Heisley Road • Mentor, OH 44060-1833

REPLACEMENT PARTS

Include all information on nameplate when ordering parts

Technical diagram of a laboratory oven with numbered components and labeled parts

Technical line drawing of a multi-tiered rack-mounted industrial machine with numbered components labeled 5, 6, and 7.

Replacement Parts:

ITEM DESCRIPTION PART NUMBER

1. Door Assembly 1221-661
2. Latch 1006-122-01-K

Latch Strike 1006-122-02-K

1. Leg 1206-067
2. Hinge 0519-092
3. Casters 0569-306

Casters w/ Brake 0569-306-BSL

1. Handle, Removable 1087-105
2. Pan, Water 1017-135

Retherm Oven	FL-2391
Rev. 0 (4/16)	Page 11 of 14

②A "DE" RETHERM CONTROL

2B "DX" RETHERM CONTROL

REPLACEMENT PARTS

Include all information on nameplate when ordering parts

① ②B ③

FRONT VIEW

RETHERM CONTROL 17 10 8 9 12 6 17 18

14 16 ④ 5 ④ 5 ④ 5

REAR VIEW

TOP VIEW

WITHOUT COVER

Electrical Replacement Parts:

ITEM DESCRIPTION Part No. ITEM DESCRIPTION Part No.

1. Switch (On/Off) 0808-125 16. Strain Relief Kits:

2A. "DE" Retherm Control 0848-092-20-K 208/240V, 3 Ph 0818-103-K

2B. "DX" Retherm Control 0848-092-03-K 208/240V, 1 Ph 0818-061

Sensor 0848-091-K

1. Blower Switch 0808-114 17. Heater Kits:

2. Vent Fan 0769-174

3. Fan Guard 0769-167

4. Fuse 0807-155

Fuse Holder 0807-150

Fuse (480V) 0807-058

Fuse Holder (480V) 0807-048

1. Blower Kit 0769-186-K

2. Contactor 0857-026

3. Terminal Block, rear

4. Hi Limit Switch 0848-077

5. Transformer 0769-197

6. Relay 0857-102 Connector, Probe (not shown) 0848-106-02

7. Fan Switch 0848-034 Food Probe 6" Long 0848-113

14. Power Cord Kits:
208/240V, 3 Ph	0810-178-K
208/240V, 1 Ph	0810-161
480V, 3 Ph	0810-180-K

3000W, 208V, 3 Ph	0811-321
3000W, 240V, 3 Ph	0811-322
3000W, 480V, 3 Ph	0811-323
2000W, 208V, 3 Ph	0811-300-K
2000W, 240V, 3 Ph	0811-301-K
2000W, 480V, 3 Ph	0811-302-K
1325W, 208V, 1 Ph	0811-306-K
1325W, 240V, 1 Ph	0811-305-K
Alarm Assy	0908-009-01

FOR "DX" OVENS ONLY:

obe (not shown) 0848-106-02

' Long 0848-113

Retherm Oven	FL-2391
Rev. 0 (4/16)	Page 12 of 14

CRES COR®

5925 Heisley Road • Mentor, OH 44060-1833

REPLACEMENT PARTS

for OVENS RR1332DE, DX SERIES 208/240V 3 Ph

Include all information on nameplate when ordering parts

e all information nameplate when ordering parts OPTIONAL BLAMETER SWITCH TO-MODELS ONLY* #P-SPSPEA-WHEWES25 103 102 101 100 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 TRANSFORMER: YIRE COOLERANCE WITH WINDING RENEW ZONE OF CHINA'S OLY MULCHINIUM REDISH BROWN MALLIUM DAILY YELLOW ZONE GREEN RED RICH COOLER RICH COOLER RICH COOLER RICH COOLER RICH COOLER RICH COOLER RICH COOLER RICH COOLER RICH COOLER RICH COOLER RICH COOLER RICH COOLER RICH COOLER RICH COOLER RICH COOLER RICH COOLER RICH COOLER RICH COOLER RICH COOLER RICH COOLER RICH CO toler RICH CO toler RICH CO toler RICH CO toler RICH CO toler RICH CO toler RICH CO toler RICH CO toler RICH CO toler RICH CO toler RICH CO toler RICH CO toler RICH CO toler RICH CO toler RICH CO toler RICH CO toler RICH CO toler RICH CO toler RICH CO toler RICH CO toler RICH CO PEREER RICH CO PEREER RICH CO PEREER RICH CO PEREER RICH CO PEREER RICH CO PEREER RICH CO PEREER RICH CO PEREER RICH CO PEREER RICH CO PEREER RICH CO PEREER RICH CO PEREER RICH CO PEREER RICH CO PEREER RICH CO PEREER NIRI PWR NIRI PWR NIRI PWR NIRI PWR NIRI PWR NIRI PWR NIRI PWR NIRI PWR NIRI PWR NIRI PWR NIRI PWR NIRI PWR NIRI PWR NIRI PWR NIRI PWR NIRI PWR NIRI PWR NIR I PWR NIR I PWR NIR I PWR NIR I PWR NIR I PWR NIR I PWR NIR I PWR NIR I PWR NIR I PWR NIR I PWR NIR I PWR NIR I PWR NIR I PWR NIR I PWR NIR I PWR NIR I PWR NIR I PWR NIR I L PWR NIR I L PWR NIR I L PWR NIR I L PWR NIR I L PWR NIR I L PWR NIR I L PWR NIR I L PWR NIR I L PWR NIR I L PWR NIR I L PWR NIR I L PWR NIR I L PWR NIR I L PWR NIR I L PWP NIR I L PWP NIR I L PWP NIR I L PWP NIR I L PWP NIR I L PWP NIR I L PWP NIR I L PWP NIR I L PWP NIR I L PWP NIR I L PWP NIR I L PPWR NIR I L PPWR NIR I L PPWR NIR I L PPWR NIR I L PPWR NIR I L PPWR NIR I L PPWR NIR I L PPWR NIR I L PPWR NIR I L PPWR NIR I L PPWR NIR I L PPWR NIR I L PPWR NIR I L PPWR NIR I L PPWR OPTIONAL BLAMETER SWITCH TO-MODELS ONLY* #P-SPSPEA-WHEWES25

Call Toll-free: 877-CRES COR (273-7267) • Fax: [phone] • www.crescor.com

Retherm Oven	FL-2391
Rev. 0 (4/16)	Page 13 of 14

REPLACEMENT PARTS

for OVENS RR1332DE, DX SERIES 480V, 3 Ph

Include all information on nameplate when ordering parts

nameplate when ordering parts OPTIONAL FLOWER AIR SWITCH PO MODELS ONLY R NUTTER TO LIF WITH R1 OPTIONAL FLOWER AIR SWITCH PO MODELS ONLY R NUTTER TO LIF WITH R2 OPTIONAL FLOWER AIR SWITCH PO MODELS ONLY R NUTTER TO LIF WITH R3 OPTIONAL FLOWER AIR SWITCH PO MODELS ONLY R NUTTER TO LIF WITH R4 OPTIONAL FLOWER AIR SWITCH PO MODELS ONLY R NUTTER TO LIF WITH R5 OPTIONAL FLOWER AIR SWITCH PO MODELS ONLY R NUTTER TO LIF WITH R6 OPTIONAL FLOWER AIR SWITCH PO MODELS ONLY R NUTTER TO LIF WITH R7 OPTIONAL FLOWER AIR SWITCH PO MODELS ONLY R NUTTER TO LIF WITH R8 OPTIONAL FLOWER AIR SWITCH PO MODELS ONLY R NUTTER TO LIF WITH R9 OPTIONAL FLOWER AIR SWITCH PO MODELS ONLY R NUTTER TO LIF WITH R10 OPTIONAL FLOWER AIR SWITCH PO MODELS ONLY R NUTTER TO LIF WITH R11 OPTIONAL FLOWER AIR SWITCH PO MODELS ONLY R NUTTER TO LIF WITH R12 OPTIONAL FLOWER AIR SWITCH PO MODELS ONLY R NUTTER TO LIF WITH R13 OPTIONAL FLOWER AIR SWITCH PO MODELS ONLY R NUTTER TO LIF WITH R14 OPTIONAL FLOWER AIR SWITCH PO MODELS ONLY R NUTTER TO LIF WITH R15 OPTIONAL FLOWER AIR SWITCH PO MODELS ONLY R NUTTER TO LIF WITH R16 OPTIONAL FLOWER AIR SWITCH PO MODELS ONLY R NUTTER TO LIF WITH R17 OPTIONAL FLOWER AIR SWITCH PO MODELS ONLY R NUTTER TO LIF WITH R18 OPTIONAL FLOWER AIR SWITCH PO MODELS ONLY R NUTTER TO LIF WITH R19 OPTIONAL FLOWER AIR SWITCH PO MODELS ONLY R NUTTER TO LIF WITH R20 OPTIONAL FLOWER AIR SWITCH PO MODELS ONLY R NUTTER TO LIF WITH R21 OPTIONAL FLOWER AIR SWITCH PO MODELS ONLY R NUTTER TO LIF WITH R22 OPTIONAL FLOWER AIR SWITCH PO MODELS ONLY R NUTTER TO LIF WITH R23 OPTIONAL FLOWER AIR SWITCH PO MODELS ONLY R NUTTER TO LIF WITH R24 OPTIONAL FLOWER AIR SWITCH PO MODELS ONLY R NUTTER TO LIF WITH R25 OPTIONAL FLOWER AIR SWITCH PO MODELS ONLY

Call Toll-free: 877-CRES COR (273-7267) • Fax: [phone] • www.crescor.com

Retherm Oven	FL-2391
Rev. 0 (4/16)	Page 14 of 14

CRES COR®

5925 Heisley Road • Mentor, OH 44060-1833

REPLACEMENT PARTS

for OVENS RR1332DE, DX SERIES 208/240V, 1 Ph

Include all information

on nameplate when ordering parts

nameplate when ordering parts *VIRI REPAI TRANSFORMER WITH TRANSFORMER COOKING RED RED RED BROWN BROWN RENAI CONTROL MUTTIMP LOOKING AT REAR K3 K1 K2 AIR PROBE OPTIONAL BLOWER AIR SWITCH RO MODELS ONLY #FIND SWITCH USE#BE #7 OPTIONAL ALARM 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 HIGHT TEMP CLOSES @ 130F

Call Toll-free: 877-CRES COR (273-7267) • Fax: [phone] • www.crescor.com