DR-ENGK-DG - Lighting Dracast - Free user manual and instructions

USER MANUAL DR-ENGK-DG Dracast

DRACAST PRO SERIES LED1000 INSTRUCTION MANUAL

THANK YOU

FEATURES

• Thank you for purchasing your Dracast PRO Series LED1000. We're confident that your Dracast light will provide years of reliable service.
• Please review this instruction booklet before using your Dracast light.
• To ensure proper continued operation, only use the power supply that is included with your Dracast LED1000.
• To protect your eyes, do not look directly into the LED1000 while it is powered on.
• To prevent electric shock, the LED1000, power supply, and any batteries should be kept away from water or excessive moisture. Never submerge the LED1000 or power supply.
• Make sure that the ventilation slots on the back of the LED1000 are clear during operation. Covering these vents will cause the unit to overheat and possibly malfunction.
  • To extend the life of the LED1000, turn the unit off when it is not in use.
• Store the LED1000 in a clean, dry place with good ventilation. Do not store the LED1000 in direct sunlight for extended periods.
• In case of malfunction, do not open your Dracast LED1000 unit. Please consult your nearest Dracast repair center for assistance. Opening the Dracast unit will void its one-year warranty.

• Anodized aluminum frame and all-metal chassis
- Local and remote DMX control
• 95 CRI (Color Rendering Index) for ultra-pure light
• High output. Up to 8000 Lux or 743 Footcandles
• V-Mount and Gold Mount battery plates included
- Included mounting yoke for use with 5/8" (baby pin) studs
- Locking yoke knobs
- Optional barn doors, filters, soft boxes, batteries, and more

INCLUDED IN THE BOX

• x1 Dracast PRO Series LED1000
• x1 12V A/C Power Supply for LED1000
• x1 5/8" Mounting Yoke
• x1 Nylon soft carrying case
• x1 Clear plastic LED board protector
• x1 V-Mount battery plate

OPERATING INSTRUCTIONS

PHOTOMETRIC DATA

Powering the light

The Dracast PRO Series LED1000 has three power options to choose from.

• A/C Power - Plug the power supply (included) into the XLR port on the back of your LED1000. Press the power switch to "ON"
• V-Mount Battery - Attach a V-Mount lithium-ion battery (not included) to the V-Mount battery plate included with your LED1000. Press the power switch to "BATTERY"
• Gold Mount Battery - Attach a Gold-Mount lithium-ion battery (not included) to the Gold-Mount battery plate included with your LED1000. Press the power switch to "BATTERY"

Understanding the Controls

Your Dracast PRO Series is equipped with full 0 - 100% local controllability. The dimming and color controls (if available) can be found on the back of the fixture.

3ft/0.9m6ft/1.8m9ft/2.7m12ft/3.6m

LED1000 PRO 5600KDRP-LED1000-DV/DG	743 fc8000 lux	195 fc2100 lux	95 fc1025 lux	56 fc600 lux
LED500 PRO 3200KDRP-LED1000-TV/TG	790 fc8500 lux	251 fc2700 lux	121 fc1330 lux	68 fc735 lux
LED500 PRO3200K - 5600KDRP-LED1000-BV/BG	353 fc @ 3200K669 fc @ 4400K390 fc @ 5600K	107 fc @ 3200K190 fc @ 4400K111 fc @ 5600K	49 fc @ 3200K88 fc @ 4400K49 fc @ 5600K	28 fc @ 3200K52 fc @ 4400K28 fc @ 5600K
	3800 lux @ 3200K7200 lux @ 4400K4200 lux @ 5600K	1150 lux @ 3200K2050 lux @ 4400K1200 lux @ 5600K	530 lux @ 3200K950 lux @ 4400K530 lux @ 5600K	300 lux @ 3200K560 lux @ 4400K300 lux @ 5600K

Close-up of a blue rectangular device with a grid-patterned panel, mounted on a black surface (no visible text or symbols)

LED1000 PRO SERIES DETAILS

PRODUCT SPECIFICATIONS

Local Dimer and Color Temp Control Knobs Anodized Aluminum Frame Two-way Power Switch A/C Power Input V-Mount / Gold Mount Battery Plate DRACAST WWW.DRACAST.COM CC RUTS 5/8" Aluminum Mounting Yoke Locking Yoke Knobs

Optical System: 1024 5mm LED bulbs in 32 x 32 square arrangement

Light Aperture: 10 x 10 inches (253mm x 253mm)

Beam Angle: 45 degrees

Weight: 5.5 lbs

Handling: Aluminum Yoke, Dual Locking Tilt Control

Mounting: Baby 5/8" Pin

Tilt Angle: +/- 90 degrees

Voltage Input: 12 V DC

Power Consumption: 60 W

Power Connection: 4 Pin XLR, 110 - 240 VAC, 50 - 60 Hz, 2.0 A

Battery Connection: V-Mount or Gold Mount Battery Plate (included)

Battery DC Voltage: 14.8 V DC

Battery Light Output: 100% of Total Output

Color Temperature: 3200K - 5600K (Variable or fixed color tempera-

ture depending on model)

Color Rendition: CRI > 95

Dimming: 0 - 100% Continuous

Controls: Local On-Board Manual Controls, RJ45 DMX In / Out Ports

Housing Color: Anodized Blue / Black

DRACAST

www.dracast.com

408.229.9222