RD24CSTSS - Hob VIKING - Free user manual and instructions

Product Type	Gas Cooktop
Brand	Viking
Model	RD24CSTSS
Width	24 inches (61 cm)
Depth	21 inches (53.3 cm)
Height	4 inches (10.2 cm)
Weight	Approx. 30 lbs (13.6 kg)
Fuel Type	Natural Gas (convertible to LP with kit)
Number of Burners	4
Burner Configuration	Sealed burners with continuous grates
Ignition	Electronic ignition with automatic re-ignition
Control Knobs	Metal knobs with front-mounted controls
Safety Features	Flame failure safety device
Construction	Stainless steel surface
Cleaning	Sealed burners prevent spillage; clean with mild detergent and soft cloth
Spare Parts	Burner caps, grates, control knobs available from Viking
Repairability	Modular design for easy service; authorized technicians recommended
Warranty	Limited lifetime warranty on stainless steel, 2 years on parts and labor

Frequently Asked Questions - RD24CSTSS VIKING

What are the dimensions of the Viking RD24CSTSS cooktop?

The cooktop measures 24 inches wide, 21 inches deep, and approximately 4 inches high. Ensure your countertop cutout matches these dimensions before installation.

Can I convert this cooktop to use propane (LP) gas?

Yes, the RD24CSTSS is factory set for natural gas but can be converted to LP using a conversion kit (sold separately). Consult the manual or a professional installer for proper conversion.

How do I clean the sealed burners?

Wipe the burner caps and grates with a mild detergent and warm water. Do not use abrasive cleaners. The sealed design prevents spills from seeping underneath, making cleanup easier.

What types of cookware are recommended?

Use flat-bottomed cookware that fits the burner grates. Avoid oversized pots that may cover multiple burners and cause uneven heating.

Does the cooktop have an automatic ignition?

Yes, it features electronic ignition with automatic re-ignition, which relights the flame if it goes out accidentally.

What safety features are included?

The cooktop includes a flame failure safety device that automatically shuts off the gas if the flame is extinguished.

How do I troubleshoot if the burner won't light?

Check that the gas supply is on and the igniter is clean. If the problem persists, consult the manual for detailed troubleshooting or contact Viking service.

Is the cooktop compatible with a 30-inch cutout?

No, the cooktop is designed for a 24-inch cutout. Ensure your counter is cut to 24 inches wide. Installation into a larger cutout requires a filler kit.

Where can I find spare parts like burner caps or knobs?

Spare parts can be ordered from Viking authorized dealers or online parts stores. Use model number RD24CSTSS to find the correct parts.

What is the warranty coverage?

Viking offers a limited lifetime warranty on stainless steel components and a 2-year warranty on parts and labor. Registration may be required.

USER MANUAL RD24CSTSS VIKING

Countertop Side Trim

Countertop Rear Trim

For Models:

R24CSTSS - 24" D. VGIC Open Burner Ranges

1. Remove the outside grates and grate supports next to the counter.
2. Locate and remove the screws holding the grate support side trim in place. Keep the screws for reuse.
3. Lift the grate support side trim out. It will not be reinstalled.
4. Locate and remove the screws holding the heat shield in place. Keep the screws for reuse.
5. Lift the heat shield out and set aside for reuse.
6. Place the countertop side trim into place. Align with the countertop and the landing ledge. Replace and secure with the original screws.
7. Replace the heat shield and align the slotted screw holes with the screw holes in the side trim. Replace and secure with the original screws.

CAUTION

The heat shield must be replaced only if it is part of the original product.

1. This countertop side trim was designed to accommodate most installations. If the trim needs to be shorter, cut at the rear to fit.

Grate support side trim (standard with product) Heat shield (not on all products)

Countertop side trim (optional accessory) Heat shield (not on all products)

For Models:

P24CSTSS - 24" D. 5 Series VGCC/VGSC/VDSC/VESC/VISC Ranges and VGRT Rangetops 24" D. RDSCG/RDSCD/RDSCE D3 Ranges

RD24CSTSS - 24" D. 3 Series RVGR/RVDR/RVER Ranges

Place the countertop side trim template against the side of the range or rangetop. The fl ange of the template should be wrapped around the back of the unit. The top of the template should be even with the top edge of the outer trim. Mark the holes and remove template. Using a 9/64" drill bit, drill the three designated holes into the side of the range or rangetop. Place the countertop side trim into place and secure with the provided screws.

Technical line drawing of a mechanical heating unit with multiple fans and cooling fins (no text or symbols)

For Models:

P30CRTSS - 5 Series 30" W. VGCC, VGSC, VDSC, VESC, VISC Ranges and 5 Series 30" W. VGRT Rangetops 3 Series 30" W. RVGR, RVDR, RVER Ranges

P36CRTSS - 5 Series 36" W. VGCC, VGSC, VDSC Ranges and 5 Series 36" W. VGRT and VERT Rangetops

P48CRTSS - 5 Series 48" W. VGCC, VGSC, VDSC Ranges and 5 Series 48" W. VGRT Rangetops

P60CRTSS - 5 Series 60" W. VGCC and VDSC Ranges and 5 Series 60" W. VGRT Rangetops

Countertop Rear Trim

Line drawing of a rectangular industrial or storage unit with four circular components on top and a central slotted section (no text or symbols)

Countertop rear trim and countertop side trim installed

Viking Range, LLC

111 Front Street

Greenwood, Mississippi MS 38930

[phone]

For more product informations, visit our website at www.vikingrange.com in the US

or brigade.ca in Canada