VC6118GHAYM - Vacuum Cleaner LG - Free user manual and instructions

Product Type	Canister Vacuum Cleaner
Model Number	VC6118GHAYM
Brand	LG
Dimensions (W x D x H)	400 x 280 x 320 mm
Weight	5.5 kg
Power Consumption	2000 W
Dust Capacity	1.5 L (bagless)
Filtration System	HEPA washable filter
Noise Level	80 dB
Cord Length	6 m
Operating Radius	9 m
Automatic Cord Rewind	Yes
Variable Suction Control	Yes (electronic)
Included Accessories	Crevice tool, dusting brush, upholstery nozzle
Dust Bag Type	Bagless (cyclonic)
Filter Maintenance	Washable HEPA filter
Thermal Protection	Yes (auto shut-off)
Warranty	2 years (depending on region)

Frequently Asked Questions - VC6118GHAYM LG

How do I empty the dust bin of the LG VC6118GHAYM?

Press the release button on the dust bin handle and pull it out. Hold it over a trash can and press the bottom release to empty. Do not wash the dust bin; wipe with a dry cloth.

How often should I clean the HEPA filter?

Clean the HEPA filter every 3-4 months or when the suction power decreases. Rinse under cold water and let it air dry completely before replacing.

What should I do if the vacuum loses suction?

Check for blockages in the hose, wand, and floor nozzle. Empty the dust bin and clean the filter. Ensure the filter is completely dry after washing.

How do I replace the HEPA filter?

Open the filter cover, remove the old filter, and insert a new LG-compatible HEPA filter. Close the cover securely. Use only genuine LG parts for best performance.

Can I use this vacuum for carpet and hard floors?

Yes, the LG VC6118GHAYM comes with a combination floor nozzle that works on both carpets and hard floors. Adjust the bristle height if available.

Why is the vacuum making a strange noise?

Strange noises often indicate a blockage or foreign object. Turn off the vacuum and check the hose, wand, and nozzle for obstructions. Also inspect the roller brush for tangled hair.

How do I use the crevice tool?

Attach the crevice tool to the wand or hose for cleaning tight spaces like corners, baseboards, and between cushions. It is ideal for detailed cleaning.

Is the cord long enough for large rooms?

The 6-meter cord combined with the 9-meter operating radius (hose + wand) allows cleaning of up to 15 meters from the power outlet. If needed, use an extension cord rated for the vacuum's power.

How do I wind the cord automatically?

Press the cord rewind button located on the top of the vacuum body. Hold the plug and guide it in to prevent whipping. The cord will retract smoothly if not tangled.

What maintenance does the vacuum require after each use?

Empty the dust bin if full, wipe the exterior with a damp cloth, and check the filter for excessive dirt. Store the vacuum in a dry place with the hose coiled loosely.

USER MANUAL VC6118GHAYM LG

Model	VC6118*H**
Language	English+Chinese
Page	33	Color(cover/body)	2/1
Material	128g铜板/100g 胶版	Size(W*H)	150 x 220(mm)
Date	2009.1.16	Designer	Zhang Lu
Part No.	MFL67234216	Description	Owner's manual

Chage Record

	Change content	ECO No.	eta	Designer	Confirm
1	add svc card descriptionACT	TT901721	09.03.12	Ge Yang	CUI.Y.T
2	delete some chinese words about sani punch	ACTT903998	09.06.18	DONGYUE	CYT
3	Add some words about clean cycle	ACTT906035	09.09.14	Chao	Liyang
4	Add eye picture about solution	ACTT001669	10.04.16	ZhangLu	CYT
5	change website	ACTT002853	10.04.24	ZhangLu	CYT
6
7
8
9

使用说明书

Interior view of a modern hotel room with a person in white robe standing by a window overlooking a cityscape and window, next to a vacuum cleaner (no text or symbols visible)

吸尘器

强劲吸力

VC6118*H***

English Page 17-31

售后服务电话

Illustration showing a bottle emitting a flame next to a device with warning symbols

Illustration of a girl in pink dress waving with a cable to her ear (no text or symbols)

警告

Line drawing of a person using a vacuum cleaner to lift a device (no text or symbols present)

Illustration of a bone structure emitting smoke (no text or symbols)

Cartoon illustration of a person using a vacuum cleaner next to a faucet (no text or symbols)

Line drawing of a person using a handheld device to interact (no text or symbols present)

警告

Illustration of a vacuum cleaner connected to a power outlet (no text or symbols)

Line drawing of a vacuum cleaner with a no-smoking symbol (no text or labels)

Line drawing of a vacuum cleaner with attached device and warning symbol (no text or labels)

注意

非专业维修人员请勿开机修理。

Illustration of a girl kneeling beside a robotic vacuum cleaner (no text or symbols present)

Cartoon illustration of a robot next to a door with a 'No' symbol, likely indicating no violation or absence.

Illustration of a vacuum cleaner connected to a pink vase (no text or symbols)

Illustration of a girl pouring liquid from a container into a pink cylindrical tank (no text or symbols)

Illustration of a handheld device with a lever and handle (no text or symbols)

部分名称与连接方法

Illustration of a clipboard with arrows indicating flow or direction (no text or symbols)

• 薄被、毛毯
  

Illustration of a pen writing on a notepad with arrows indicating writing (no text or symbols present)

Top-down schematic of a refrigerator or air conditioner unit (no text or labels visible)

注意:

Illustration of a foot using a pen to press or write on a notebook, next to a pink rectangular object (no text or symbols visible)

不加抹布时，抹布刷头使用方法

Diagram of a car air conditioner unit with a magnified inset showing internal components (no text or labels)

Illustration of a pink X-shaped object resembling a device or enclosure with ventilation grilles (no text or symbols)

Technical line drawing of a mechanical component or housing (no text or symbols visible)

Diagram of a mechanical assembly with a magnified inset showing a component being moved, no text or symbols present.

Line drawing of a hand using a probe to insert or install electronic components on a device casing (no text or symbols)

Illustration of a kitchen appliance being lifted into a trash bin, showing a hand inserting a plastic bag into the bowl (no text or symbols)

③ 打开集尘桶的盖子，倒掉灰尘。

灰尘分离器的清理方法

Diagram illustrating eye anatomy with labeled eye and magnified view of internal organs

① 检查灰尘分离器内部是否有灰尘。

Illustration of a hand holding a pink filter component, no text or symbols present

② 握住灰尘分离器盖的手柄拆卸盖子。

Illustration of a pink object being poured into a trash bin with a plastic container nearby (no text or symbols)

3 倒掉灰尘。

Illustration of a hand holding a pink hat with a woven basket (no text or symbols)

堵住灰尘分离器盖的小孔，抖掉灰尘。

集尘桶、灰尘分离器的清洗/安装方法

清洗方法

Illustration of cleaning tools including a bucket, spray gun, and filter (no text or symbols)

Illustration of three mechanical components inside a circular frame (no text or symbols)

Illustration of hands cleaning a shoe with a magnified inset showing the interior detail (no text or symbols)

Illustration of a hand holding a cup with a pink bandage, showing a close-up of the cup's seat and handle (no text or symbols)

② 安装灰尘分离器和集尘桶。

Line drawing of a hand using a handheld device to open a cylindrical device (no text or symbols visible)

3 将集尘桶安装在吸尘器上。

Line drawing of a hand holding a vacuum cleaner with a downward arrow indicating motion (no text or symbols)

Illustration of a device with mesh pattern and a magnified inset showing a hand holding a tool (no text or symbols)

Illustration of a vacuum cleaner with open lid and internal components, showing mechanical assembly (no text or symbols)

Illustration of a multi-layered device with pink and white sections, showing internal components (no text or symbols)

4 取出电机保护过滤器。

清洗方法

Illustration of a faucet pouring liquid into a container, with another container partially visible below (no text or symbols)

1 冲洗干净

Illustration of cleaning a pink surface with a hand holding a brush and a small object nearby (no text or symbols)

彻底去除水分

Illustration of three smartphones in a pink circular frame, no text or symbols present

Illustration of a multi-layered device with pink and white sections, showing internal components (no text or symbols)

1 将电机保护过滤器装入过滤器外壳内。

盖上过滤器盖。

Illustration of two different vacuum cleaner designs with open doors and internal components (no text or symbols)

Line drawing of a hand holding a vacuum cleaner (no text or symbols)

■ 握住主机的移动手柄，盖上吸尘器盖。

排气过滤器的拆卸/清洁/安装方法

拆卸方法

Illustration of a hand cleaning a trash bin with a lid and granular material (no text or symbols)

安装方法

Illustration of a robotic vacuum cleaner with a highlighted component (no text or symbols)

1 抖动排气过滤器进行清洁。

Illustration of a cartoon girl with pink hair and rosy cheeks, enclosed in a pink circular frame (no text or symbols)

使用吸尘器后的保管方法

卷线器按钮

的保管方法

Line drawing of a vacuum cleaner with a magnified inset showing the handle and blade (no text or symbols)

Line drawing of a vacuum cleaner with a magnified inset showing the handle and blade (no text or symbols)

① 按住主机盖按钮，打开主体盖。

Illustration of a medical device with a magnified view showing a hand holding a pink object (no text or symbols present)

Illustration of a robotic device with open lid and internal components, shown from two different angles (no text or symbols)

Illustration of a hand holding a smartphone with layered components (no text or symbols)

4 取出电机保护过滤器。

清洗方法

(用凉水清洗)

Illustration of a faucet pouring liquid into a sink, with other items partially visible (no text or symbols)

1 用流动水冲洗干净

Illustration of cleaning a smartphone and a hand holding a pink cloth, with no text or symbols present.

② 彻底去除水分。

Illustration of three smartphones inside a pink circle (no text or symbols)

Cartoon illustration of a smiling robot with hands reaching toward a tire (no text or symbols)

Product specifications 17

Attention before using the appliance 18\~19

Assembling and adjusting the Cleaner 20

Parts description and assembly

Accessories

Using the Accessories, Elbow Tube 21

Using Dust Brush & Upholstery Nozzle

Using and cleaning the Sani Punch 22

Using the Sani Punch

How to clean the inhaler of the bed cleaner

Using the Mop and Mop Nozzle 23

How to separate or empty the dust box 24

How to empty the dust separator

How to clean and assemble the dust box

and separator 25

Cleaning

Assembling

How to separate, clean and assemble the

protection filter of the motor 26

Disassembling

Cleansing

How to separate, clean and assemble exhaust filter 27

Disassembling

Cleansing

Assembling

Check before reporting the trouble 28\~30

Packing List 31

Product specifications

272 414 290

Model: VC6118*H***

220V\~50Hz

IEC: 1600W

MAX: 1800W

Net Weight: 5.3Kg

Dust Capacity: 1.5L

Dimension: 272mm x 414mm x 290mm

This appliance complies with the

following GB Directives:

GB4706.1-2005

GB4706.7-2004

GB17625.1-2003

GB4343.1-2009

※ You will not be informed otherwise of any changes in appearance and standard deriving for improvement of product quality.

Attention before using the appliance

Attention before using the appliance

Please read all the following information, which contains important instructions for the safety, the use of the appliance.

DANGER

May immediately cause serious injury or death.

WARNING

May possibly cause serious injury or death.

ATTENTION

May possibly cause losses of property or light injury.

DANGER

Do not pick up anything that is burning or smoking, such as cigarettes, matches or hot ashes.

Illustration showing a person using a vacuum cleaner with a 'No' symbol and flame, accompanied by a bottle and safety tag.

Please turn off the power before pulling out the plug to prevent fire or electric shock. Never handle plug or appliance with wet hands. (Do not use the appliance on the power above 220V.)

Illustration of a girl in pink dress holding a phone with a prohibition symbol (no text or labels)

WARNING

Avoid picking up hard, sharp objects with the cleaner. They may damage the cleaner and the tank.

Do not vacuum the objects like hair ball or big paper ball, otherwise the hose is possibly blocked up. Please clear the hose in time when it is blocked.

Line drawing of a vacuum cleaner with a no-smoking symbol (no text or labels)

Independently use a socket when the current is ≥15A. It may cause fire when many electric appliances share one socket. In order to avoid the needless danger, you had better not use the prolonged thread of power cord. The current at most 10A is allowed.

per cord. llowed.

To avoid the danger of fire or electric shock, do not vacuum liquid, blade, flammable substances, or small particles like cement and gesso in cleaning.

gesso in cleaning.

Unplug cleaner when not in use. Turn off all controls before unplugging.

Cartoon illustration of a robot holding a tool, with a no-smoking symbol nearby (no text or labels)

WARNING

Do not let the power cord near the electric heater or other heat source, lest that the cleaner should be deformed or it should cause fire. Do not use the appliance when the power cord or plug is damaged. The damaged power cord or plug must be replaced in the approved service station.

Close supervision is necessary when any appliance is used by or near children. Do not allow vacuum cleaner to be used as a toy or to run unattended at any time.

Do not operate the appliance for long when the nozzle inlet or nozzle outlet is blocked, which may have it deformed or damaged.

Line drawing of a vacuum cleaner with a hand operating the valve (no text or symbols)

In using the appliance, pay attention to the electrostatic effect generated on the telescopic tube and cleaner body.

Line drawing of a vacuum cleaner with motion lines indicating airflow or vibration (no text or symbols)

ATTENTION

Do not allow the non-professional maintenance people to repair.

Illustration of a girl kneeling beside a cartoon-style robot with a camera (no text or symbols)

Do not pull or carry by cord, use cord as a handle, close door on cord or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.

Cartoon illustration of a small robotic device next to a door (no text or symbols)

In winding the power cord, hold the plug before pressing the button of the cord reel. Do not pull the power cord beyond the red warning line, other wise the power cord may be damaged or unable to be wound up. Pay attention to the plug in winding the cord to avoid damaging the surrounding objects.

Illustration of a vacuum cleaner connected to a pink vase (no text or symbols)

Do not bend, stamp on, or drag the hose. Do not continue to use the hose if it is damaged.

Do not use any heavy or sharp object to press the power cord.

Illustration of a vacuum cleaner next to a small pink cup on a small stand (no text or symbols)

Do not use without dust tank or filters in place. Change tank frequently when picking up very fine materials such as powder.

Illustration of a woman pouring liquid from a bucket into a pot next to an electric vacuum cleaner (no text or symbols present)

Keep hair, loose clothing, fingers, feet and all parts of body away from the nozzle or movable portion.

Illustration of a girl waving next to a mobile phone (no text or symbols visible)

Assembling and adjusting the Cleaner

Parts description and assembly

吸力控制 地板 地毯 沙发 窗帘 关闭 地板 cleaning the dirtiest environment. 地毯 cleaning fabrics and mattress (bedding). 沙发 cleaning sofa, chair, floor. 窗帘 cleaning door and window curtain, table, and light blanket. 关闭 Adjusting to “关闭” when you stop operating the appliance. When cleaning under different environment, adjust the suction level according to practical need.

Control button Telescopic tube Flexible Hose Cord winding Button

Accessories

• Dust Brush & Upholstery Nozzle • Corner Nozzle
Hose Telescopic tube Sani Punch MopMop Nozzle

Using Dust Brush & Upholstery Nozzle

▶ Tear the vinyl bag and pull out accessories.

Upholster nozzle Dusting brush

Push the button

sh the button

Upholstery nozzle mode

Illustration of hands holding a tool with a cable, no text or symbols present

Dussting brush mode

Illustration of a robotic arm adjusting a pink chair seat (no text or symbols)

Illustration of a hand using a pipette to lift a lamp, with a small smartphone on a stand (no text or symbols)

Upholstery Nozzle is for vacuuming upholstery, mattresses, etc.

Nozzle, Crevice

Nozzle, Crevice

Line drawing of a handheld medical or laboratory device with a pointed tip and handle (no text or symbols)

Line drawing of a handheld medical or laboratory device with a long handle and multiple ports (no text or symbols)

Illustration of a hand using a tool to lift a pink object on a curved surface (no text or symbols)

Simple line drawing of a medical or laboratory device with a pipette inserted into a box, enclosed in a dashed circular border (no text or symbols)

Nozzle, Crevice can be used for cleaning the place hard to reach.

Using and cleaning the Sani Punch

Using the Sani Punch

Use it as shown in the diagram Assembling Connect to Tube Connect to Hose Effective cleaning

Using 地毯 Set the suc switch to "地 Depending bedding, awkward a lot of nois

地毯

Set the suction power control switch to "地毯" before vacuuming. Depending on the type of bedding, handing may be awkward or it may cause a lot of noise. If this is the case, adjust the suction power control switch to a lower setting.

• bed, bedding, heavy blanket

Illustration of a pen writing on a notepad with directional arrows (no text or symbols)

• Light blanket & sheet

Illustration of a pen writing on paper with arrows indicating motion (no text or symbols)

To increase cleaning efficiency for light blankets, lay on top of a bulky blanket and then clean.

• If the punch bar does not move, lift the nozzle slightly off the surface.
• If it does not move, even after doing this, check if the suction power is too low or if the nozzle base is clogged with a foreign object.
  • This Sani Punch nozzle is for effective cleaning of beds and blankets to remove mites and dust.

How to clean the inhaler of the bed cleaner

The vibrator may break down due to the cleansing of the inhaler with water.

Spiral

1 If the dust settles in the box while cleaning, press the button 2 or 3 times. (It will remove most of the dust.)

2 After the cleaning, if there are lots of dusts in the box, separate the box from the inhaler by turning it anticlockwise.

3 Empty the box. Aim 4 the Spiral, Fix the box into the inhaler by turning it clockwise.

Pressing buttons

5 Separate the bottom plate by pressing the buttons in the back.

6 Clean the dirty body of the inhaler carefully with a cloth.

7 Wash the separated bottom plate and dry it in the shade.

Joining spiral Joining groove

8 Arrange the vibrator in order. Insert the joining spiral into the groove.

10 Attach the bottom plate properly by pressing down.

Using the Mop and Mop Nozzle

Using the Mop

When using the mop nozzle, please dry it first.
▶ Always using special mop of LG.
▶ Attach the mop to the bottom of the nozzle with the white surface upturned.
When drying the mop in washing machine, set it to the weakest mode.
Please see the installation diagram of mop board on the right if we use mop nozzle instead of mop.

Technical line drawing of a mechanical device with no visible text or symbols

NOTE: It will be electrical danger when using the mop with excess moisture, and will be harmful to the cleaner.

The mop can not be fixed when it deviates from the fixing place.

Mind that do not block the dust suction inlet when fixing the mop.

Using the Mop Nozzle

▶ Depending on different condition, connect or disconnect the mop.

Connecting method

1. Fix the mop according to the method showed on the diagram.

graph TD
    A["Rectangular Component"] --> B["Storage Unit"]
    B --> C["Stacked Storage Unit"]

1. After the mop nozzle matches with the mop board, connect the mop nozzle from the top down. When you hear a sound of Ta Ta, it means the connection is ok.

Mop nozzle Mop board Mop

Disconnecting method

1. Disconnect the mop board according to method showed below, and then take down the mop.

Illustration of a foot using a pen to press or mark on a surface, next to a pink rectangular object (no text or symbols)

Use method of mop nozzle when the mop is not attached

Diagram of a device interior with a magnified circular detail (no text or symbols)

To protect the attaching location of mop, it is recommend connect the mop nozzle according to the left diagram when mop is not used.

Illustration of a mechanical device with a pink X-shaped symbol on its side (no text or labels)

When the mop is not used, you couldn't use the method showed on the left diagram. If not, the mop nozzle will damage the attaching location of mop.

Please clean the mop and mop nozzle as the following diagram.

graph LR
    A["Initial battery housing"] --> B["Add battery"]
    B --> C["Add battery with magnified inset"]
    C --> D["Final packaging with pencil"]

How to separate or empty the dust box

Warning: Empty the box when the dust settles up to the MAX line.

• Too much dust beyond this line may reduce the inhaling power.
• Dust box should be cleaned at least once per 3 months.

Button

Uncover by pressing the button.

Detach the dust box by holding its handle. Empty the dust box.

How to empty the dust separator

Warning: Check the inside of the dust separator when cleaning the dust box.

• Clean the inside of the dust separator, because too much foreign substance such as waste paper or plastic in the dust separator may reduce the inhaling power.
  • Dust separator should be cleaned at least once per 3 months.

Diagram illustrating eye anatomy with labeled eye and magnified view of the device

Illustration of a hand cleaning a pink circular object with a mesh pattern (no text or symbols)

Check if the dust has settled in the dust separator. Separate the cover by holding its handle.

Illustration of a hand pouring liquid into a trash bin (no text or symbols)

Illustration of a hand holding a pink hat with a woven basket (no text or symbols)

Empty the separator.

Remove the dust from the small holes in the cover of the separator.

How to clean and assemble the dust box and separator

CleaningCleaning

Illustration of a showerhead spraying water into a bucket and a pink funnel (no text or symbols)

- Cleanse the dust box, separator and its cover with running water.

Illustration of three white objects with a pink circular background, no text or symbols present.

- Dry them in the well-ventilated shade for a day before using.

AssemblingAssembling

Illustration of hands cleaning a mechanical component with a magnified inset showing the interior detail (no text or symbols)

1 Attach the cover by inserting the spiral in the cover into the groove.

Illustration of a hand holding a cup with a pink bandage, showing a close-up of the cup's seat and handle (no text or symbols)

② Assemble the dust separator and box.

Line drawing of a vacuum cleaner with open lid and handle (no text or symbols)

3 Attach the assembled dust box to the body of the cleaner.

Line drawing of a hand holding a vacuum cleaner with a button, showing no text or symbols

2 Cover the cleaner by holding the carrying handle of the body.

Warning: • If you move the cleaner by holding the carrying handle with the cover not fully closed, the cover may open, causing damage to the parts and the dust box. So check if the cover has been properly closed.
- If you use the cleaner without assembling the cover of the dust separator, it will increase the noise and reduce the inhaling power when cleaning. So check the assembling once again.

How to separate, clean and assemble the protection filter of the motor

Disassembling

Button

1 Uncover by pressing the button.

Illustration of a medical device with a magnified inset showing a hand holding a pen (no text or symbols present)

3 Separate it from the filter cover by holding the handle of the case.

Illustration of a vacuum cleaner with open lid and internal components, shown from two different angles (no text or symbols)

② Detach the protection filter of the motor from the body after disassembling the dust box.

Illustration of a layered device with a pink case and keyboard, showing internal components and motion arrows (no text or symbols)

4 Detach the filter.

Cleansing

Illustration of a faucet pouring liquid into a container with a lid, showing mechanical components (no text or symbols)

1 Clean with running water.

Illustration of cleaning a smartphone and a brush with spray, showing no text or symbols

② Remove the water completely.

Illustration of a pink circular background with abstract geometric shapes and no visible text or symbols

3 Dry in the well-ventilated shade for a day before using.

Warning: • Assembling is done in reverse order of disassembling.

- If you use the cleaner without assembling the protection filter of the motor, noise increases and dust gets into the motor when cleaning, thus leading to the shorter life of the cleaner. So check the assembling once again.

Illustration of a multi-layered device with pink and red sections, showing internal components (no text or symbols)

1 Put the filter into the case.

2 Cover the filter.

Illustration of two views of a vacuum cleaner with open lid and internal casing (no text or symbols)

3 Mount the assembled filter and assemble the dust box.

Line drawing of a hand holding a vacuum cleaner (no text or symbols)

4 Cover the cleaner by holding the carrying handle of the body.

How to separate, clean and assemble exhaust filter

Disassembling

The exhaust filter should be cleaned at least once half a year. Allow exhaust filter to dry in a shaded location for a dry.

Cover button of the exhaust filter

Cover of the exhaust filter

Exhaust filter button Exhaust filter

Cleansing

Illustration of a hand using a grater to clean granular material from a container (no text or symbols)

Assembling

Illustration of a robotic vacuum cleaner with a highlighted cover and sensor array (no text or symbols)

1 Shake off the exhaust filter.

2 Insert the exhaust filter and join the cover properly until you hear the click of the button.

Illustration of a cartoon girl with pink hair and a pink hat, enclosed in a circular frame (no text or symbols)

How to keep the cleaner after using

Cord winding button

• The cord winds up when you press the button.
- Insert the spiral of the inhaler into the groove in the back or at the bottom of the body.

Check before reporting the trouble

You won't be happy to waste money by calling for service when there is no trouble with the cleaner. Here is good advice to follow for trouble shooting before calling for service. Read the instructions carefully, and you can remove the trouble by yourself.

If inhaling is not well done?

Stage 1

Check if the control button of the inhaling power has been put to "MAX".

Stage 2

Clean the protection filter of the motor.

26P

Disassembling

Line drawing of a hand holding a vacuum cleaner with a magnified inset showing the cable being inserted (no text or symbols)

1 Uncover the body by pressing the button of the cover.

Illustration of a medical device with a magnified inset showing a hand holding a pink object (no text or symbols present)

3 Separate the filter from the cover by holding the handle of the case.

Illustration of a vacuum cleaner with open lid and internal components, shown from two different angles (no text or symbols)

2 Detach the protection filter of the motor from the body after disassembling the dust box.

Illustration of a pink mobile phone with a keyboard and open screen, showing internal components (no text or symbols)

4 Detach the protection filter of the motor.

Cleansing (with cold water)

Illustration of a faucet pouring liquid into a container with another lid, against a pink background (no text or symbols)

1 Cleanse it with running water.

Illustration of cleaning a pink surface with a hand holding a cloth and another using a spray bottle (no text or symbols)

2 Remove the water completely.

Illustration of three smartphones in a row inside a pink circle (no text or symbols)

3 Dry it in the well-ventilated shade for a day before using.

If you have a problem

If a minor problem occurs, it usually can be solved quite easily when the cause is found by using the check list below.

Problem:

The noise increases and the hose shrink. Suction power is abruptly weakened.

Help:

Check the dust tank and suction inlet.

Solution

1 Dust tank full. (Arrive at MAX line) Empty dust tank.

② Motor filter dirty.

Clean the motor filter with brush and water, allow to dry and replace in cleaner.

Is it full? Empty the dust tank in time!

Is the filter OK? Then check the suction inlet.

③ When checking the suction inlet, adjust the suction level to the maximum.

First step

Turn cleaner off and disconnect from electrical outlet, then disconnect nozzle from telescopic tube. Check if it is blocked, and remove any blockages.

If there is still a problem, proceed the second step.

Illustration of a vacuum cleaner with a cartoon character (no text or symbols)

Second step

Disconnect the telescopic tube from hose. Check if it is blocked, and remove any blockages.

If there is still a problem, proceed the third step.

Tube Check ed, and

Third step

Plug cleaner in, turn on, and check hose end for suction. Remove any obstructions.

If there is also a problem, clean the filter.

Please check before notifying malfunction

If you doubt the product meets with malfunction, please check the cause of such malfunction before contacting with the after-sales service center or agent, so as to ensure efficiency of repair.

Malfunction

The vacuum does not work?

The vacuum does not work?

Cartoon illustration of a robot-like device with hands and motion lines, no text or symbols present

Peculiar smell exists inside the vacuum cleaner

Vibration brush head does not work or the amplitude of vibration is too small.

The power cord can not be scrolled thoroughly into the vacuum cleaner or the power cord can not be fully pulled.

The vacuum cleaner or the discharged air is too heat.

Inner wall of the hose is too dirt.

Check

• Is the plug inserted?
• Is the socket powered on?
- If the hose inserted?
- If the motor heat protection opened?

Troubleshooting

• Insert the plug tight (This product is applicable for 220V)
• Verify the power of socket is on
• Insert the hose tight

• Restart in 2 hours

• When the vacuum cleaner's suction is too large or the motor is under high speed running, they do not belong to the abnormal conditions. So, please use the vacuum cleaner properly.

• If it is the noise rather than the normal motor sound, please phone the repair center.
  • The duster collector is filled up.
  • The filter is clogged.
  • Suction inlet is jammed.
• Drawtube is clogged.
• Hose is clogged.
  • Clean out the dust collector.
• Purge the sponge filter with water and air-dry in the shady and cool place for one day.
  • Take out the sucked objects before use.
  Take out the objects inside the drawtube before use.

• Take out the objects inside the hose before use.

• When the motor is running, the rubber band used for fixing the motor will produce a little smell due to the heat, but it will not affect the operation or damage the machine.

• When the machine sucks some water accidentally or the dust collector is not cleaned for a long period of time, the peculiar smell will be produced. So, clean up the dust collector timely.

• The vibration brush head is used for cleaning the fabric such as bedclothes and sofa.
  • The main nozzle head shall be used for cleaning the carpet.

• Check whether the chassis is properly.
• When cleaning the thin fabric, please pad the thick bedclothes hereunder.
• As cleaning the carpet, sometimes, the machine may not work due to affection from the carpet materials. So, please carry out the operation as required

• Please confirm whether obstruction exists at the dust collector and suction inlet.
  • The amplitude of vibration may be reduced due to the decrease of suction.

• Pull out part of the power cord and then re-scroll it.

• Please put forth your strength to pull out the power cord, which will not be damaged.
• The power cord entwined inside the machine or it is caused by high temperature in the summer.
• The cord is bended inside the machine or not coiled around the winder. After the winder is started, the normal operation could be realized.

• Is the suction normal?

- The heat air discharged from the machine is arising from the heat produced by motor. So, the temperature is normal, please use the machine continuously.

- Never suck the water because after mixing of the water and dust, the tube wall will be polluted and the motor will be damaged.

Packing List

Vacuum Cleaner 1

Owner's Manual 1

Sani Punch 1

Hose 1

Telescopic tube 1

Corner Nozzle 1

Mop Nozzle 1

Dust brush & Upholstery Nozzle 1

Card, Service 1

Mop 3

请打电话

LG电子

400-819-9999

售后热线

热线 一号通

LG 电子 (天津)电器有限公司

地址: 中国·天津市北辰区津围公路9号

传真：[phone]

邮编: 300402