V-KC902CES - Vacuum Cleaner LG - Free user manual and instructions

USER MANUAL V-KC902CES LG

Model	V-KC902CES.CXRPLGT
Language	English+Chinese
Page	44	Color(cover/body)	2/1
Material	128g铜板/100g 胶版	Size(W*H)	150 x 220(mm)
Date	2008.12.01	Designer	An zhanwang
Part No.	MFL56999634	Description	Owner's manual

Chage Record

No.	Date	Change content	ECO No.		Designer	Confirm
1	Add Dust Capacity		ACTT805518	08.10.30	SUYAN	CUI.Y.T
2	change power (page 2 and 23)		ACTT806091	08.12.01	ZXL	CUIYT
3	change nozzle from NZ-32 to NZ-58 actt903		707 09.06.06	ZXL CUIYT
4	ADD EYE PICTURE ABOUT SOLUTION		ACTT002285	10.04.02 AZW	CYT
5
6
7
8
9

Life's Good LG

使用说明书

吸尘器 强劲吸力

V-KC902CES

Safety warning illustration showing a person holding a fire next to a vehicle with hazard symbols

Line drawing of a vacuum cleaner with a hose and clamped components (no text or symbols)

Cartoon illustration of a car with a faucet spraying water, no text or symbols present

Line drawing of a robot with hands holding a tool, no text or symbols present

使用前注意事项

警告

Illustration of a child using a vacuum cleaner next to a car, with no text or symbols present.

Illustration of a woman cleaning a broom with a hand near it, no text or symbols present

Illustration of a hand cleaning a surface with a spray gun, no text or symbols present

Illustration of a child cleaning a broom with a handsqrt, no text or symbols present

Illustration of a mop and spray with smoke, no text or symbols present

Illustration of a hand using a device to trigger a stop, with no text or symbols present.

Illustration of a hand using a dropper to apply liquid onto a pink bottle (no text or symbols)

Illustration of a hand holding a pen above a notepad, with no text or symbols present.

Illustration of a child cleaning a cart with a 'no' symbol (no text or symbols present)

警告

Illustration of a hand using a power tool to tighten or tighten a plug, with no text or symbols present.

Illustration of a toilet with a crossed-out cup and bucket, next to a mop and a prohibition symbol (no text or labels)

Illustration of a pink cat sitting next to a rocket launcher with a prohibition symbol (no text or labels)

禁止按机体内的按键，避免发生机器故障。

Safety warning symbol with crossed-out pink cross and prohibition symbol

Illustration of a hand holding a pink X-shaped object over a circular object, with no text or symbols present.

使用前注意事项

警告

Illustration of a truck connected to a vertical pole with a cable, accompanied by a no-smoking symbol (no text or labels present)

Line drawing of a vacuum cleaner with a handle and no text or symbols present

Illustration of a small table with a pink object and connected to a washing machine (no text or symbols)

Diagram illustrating the process of a device being opened, showing step ① and step ② with directional arrows.

将集尘桶放到吸尘器里

不要提集尘桶手柄

往里推集尘桶使其倾斜装到吸尘器中

提机体手柄

注意:

Illustration of a hand holding a pink spray bottle next to a bottle with a small object (no text or symbols)

Illustration of a hand holding a small object before and after a transformation, showing no text or symbols

粘贴抹布的方法

Line drawing of a car with wheels and side brackets (no text or symbols)

真空清扫/蒸气清扫/真空蒸气 同时清扫

真空清扫

Illustration of a hand using a tool to lift a small object, with another piece showing a similar shape (no text or symbols)

将角落刷头或蒸汽刷头连接在伸缩管上。

Illustration of a child using a mop and a small robot on a tiled floor (no text or symbols)

Illustration of a hand using a tool to lift a small object, with an inset showing the same step (no text or symbols present)

Illustration of a child using a mobile phone to clean a small vehicle on a tiled floor (no text or symbols)

Illustration of a hand using a vacuum cleaner to lift a small object, with an inset showing the same tool (no text or symbols present)

Illustration of a pink rectangular object transforming into a vacuum cleaner (no text or symbols)

清扫地毯时

Illustration of a cartoon character using a vacuum cleaner on a tiled floor (no text or symbols)

Illustration of a medical procedure showing a hand holding a patient's leg and a box being inserted (no text or symbols present)

Illustration of a cartoon character using a vacuum cleaner on a pink mat (no text or symbols)

去除久渍/地面的污渍时

Illustration of a pink rectangular object transforming into a vacuum cleaner (no text or symbols)

Illustration of a hand using a vacuum cleaner to clean or brush on a tiled floor (no text or symbols)

Illustration of a hand holding a pink pen or cap over a medical device (no text or symbols visible)

Illustration of a hand holding a pen and a circular object with arrows indicating rotation (no text or symbols)

Illustration of a table with chairs and a bed, showing an arrow indicating transformation (no text or symbols)

Illustration of hands cleaning a showerhead with a spray bubble (no text or symbols)

注意

Illustration of a pink electrical plug connecting to a wall socket (no text or symbols)

关闭开关，拔掉电源插头。

Illustration of hands washing a shower with water splashing (no text or symbols)

Illustration of a hand using a tool to lift a component on a pink surface (no text or symbols)

Illustration of a hand using a handheld device to clean water (no text or symbols)

Product specifications 23

Attention before using the appliance 24-27

Assembling the Cleaner 28

Parts description and assembly Parts description and assem

AccessoriesAccessories

Using the Accessories 29

Using and cleaning the Sani Punch 30

Usng the Sani Punch

Cleaning the Sani Punch

Dust Tank 31-32

Removing the Dust Tank

Replacing the Dust TankReplacing the Dust Tank

Cleaning the Dust TankCleaning t

Cleaning air filter and motor safety filter 33

Cleaning exhaust filter 34

Basic use method of the steam vacuum cleaner 35

Assembling & power switch

Water-filling method

Duster-sticking method

Vacuum cleaning/steam cleaning/steam vacuum cleaning 36

Floor/ordinary ground cleaning 37

Water filling method 38

Maintenance Methods 39

If you have a problem 40-42

Packing List 43

Product specifications

294 452 330

Model: V-KC902CES

220V\~ 50Hz

Dimension: 294mm x 452mm x 330mm

This appliance complies with the

following GB Directives:

GB4706.1-2005

GB4706.7-2004

GB17625.1-2003

GB4343-2003

※ You will not be informed otherwise of any changes in appearance and standard deriving for improvement of product quality.

Attention before using the appliance

Attention before using the appliance

Please read all the following information, which contains important instructions for the safety, the use of the appliance.

DANGER

May immediately cause serious injury or death.

WARNING

May possibly cause serious injury or death.

ATTENTION

May possibly cause losses of property or light injury.

DANGER

Do not pick up anything that is burning or smoking, such as cigarettes, matches or hot ashes.

Illustration showing a bottle emitting a flame next to a car with a warning symbol and directional arrows.

Please turn off the power before pulling out the plug to prevent fire or electric shock. Never handle plug or appliance with wet hands. (Do not use the appliance on the power above 220V.)

Illustration of a girl holding a plug with a prohibition symbol, likely for smoking or disinfection.

WARNING

Avoid picking up hard, sharp objects with the cleaner. They may damage the cleaner and the tank.

Do not vacuum the objects like hair ball or big paper ball, otherwise the hose is possibly blocked up. Please clear the hose in time when it is blocked.

Line drawing of a handheld device with a lever and handle, no text or symbols present

Independently use a socket when the current is ≥15A. It may cause fire when many electric appliances share one socket. In order to avoid the needless danger, you had better not use the prolonged thread of power cord. The current at most 6A is allowed.

To avoid the danger of fire or electric shock, do not vacuum liquid, blade, flammable substances, or small particles like cement and gesso in cleaning.

Illustration of a cartoon-style robot with wings and wheels, emitting steam (no text or symbols)

Unplug cleaner when not in use. Turn off all controls before unplugging.

Line drawing of a robotic arm with fingers and tools (no text or symbols)

Line drawing of a mechanical component with no visible text or symbols

Attention before using the appliance

Caution

When used for cleaning the wood floor, painted floor or tile floor, please pay attention to following items: 1. some floors will change the color and deform due to the heat. 2. When the wet duster is used, the floor chink may be permeated by water, so that the floor may be damaged.

Illustration of a child cleaning a car with a mop (no text or symbols)

As the power is on, or the steam brush head is used, never open the water filling cover, or fill the water; otherwise, you will be scalded due to overflowing of the hot water.

Before use the hot water steam produced by this product, please inquire your floor manufacturer so as to confirm whether the floor material is applicable to such hot water steam. Never touch the bottom of steam brush head with your hands or feet, or you will be scalded.

Never use water or other detergent to clean the surface and bottom of the steam brush head; otherwise, it may be damaged or electric leakage may occur.

As cleaning the floor, the steam brush head must be attached with duster, or the floor material may change the color or deform due to hot steam, while the duster shall be removed as cleaning the carpet.

Never leave the steam brush head at the same position for a long period of time or use the brush head repeatedly at the same place because the floor may change the color or deform due to the heat arising from high temperature and steam.

As the power is on, or the steam brush head is used or has been just used, never reverse or tilt the brush head; otherwise, you will be scalded due to the injection of hot water steam.

The brush head shall be filled with water rather than the other synthesized detergent, chemical substance or liquid; otherwise, the product will be damaged or explosion may occur.

When heat rejection or having a break, the steam brush head shall be placed on the tray as specified rather than on the floor, or it may damage the floor.

The product shall not be used by the children, the aged and the persons who are unfamiliar with it, so as to avoid scalding.

Illustration of a child cleaning a large vehicle with a mop (no text or symbols)

Attention before using the appliance

Caution

When the steam brush head is used or under heating, never touch the surface of the steam brush head, so as to avoid the scalding.

Never use the steam hose and drawtube to suck the water or they shall not be cleaned with water because electrical connecting parts are installed inside such hose and drawtube. Please check the hose and drawtube on a regular basis. They shall not be used in case of damaged. In this case, please contact the after-sales service department.

Illustration of a bathtub cleaning a floor with a tool and spray (no text or symbols)

Never let the steam face to the person, animal and the devices where the electrical parts are installed, so as to avoid scalding.

Pink cartoon cat and tank illustration (no text or symbols)

Never push or pull the lever on the vacuum cleaner. If the lever is damaged, the vacuum cleaner may not work properly and indicator light may flash red and alarm may sound although dust tank is not full.

For the attachment or change of the duster, the vacuum cleaner must be closed. If the duster is changed when the vacuum cleaner is under operation, the floor will be damaged and scalding may occur.

When the power is on or the vacuum cleaner is under use, the "electric leakage breaker" will call into play, the vacuum cleaner shall be closed immediately and please contact the after-sales service center.

Service center

Never touch the gear on the vacuum cleaner, failure to do so could result in personal injury.

Illustration of a hand using a pink tool to adjust or install a car wheel (no text or symbols visible)

Line drawing of a mechanical vehicle with no visible text or symbols

Attention before using the appliance

WARNING

Do not let the power cord near the electric heater or other heat source, lest that the cleaner should be deformed or it should cause fire. Do not use the appliance when the power cord or plug is damaged.

The damaged power cord or plug must be replaced in the approved service station.

Close supervision is necessary when any appliance is used by or near children. Do not allow vacuum cleaner to be used as a toy or to run unattended at any time.

Do not operate the appliance for long when the nozzle inlet or nozzle outlet is blocked, which may have it deformed or damaged.

Line drawing of a handheld industrial machine with attached arm (no text or symbols)

In using the appliance, pay attention to the electrostatic effect generated on the telescopic tube and cleaner body.

Illustration of a robotic car with motion lines indicating speed or impact (no text or symbols)

ATTENTION

Do not allow the non-professional maintenance people to repair.

Do not pull or carry by cord, use cord as a handle, close door on cord or pull cord around sharp edges or comers. Do not run appliance over cord. Keep cord away from heated surfaces.

Keep hair, loose clothing, fingers, feet and all parts of body away from the nozzle or movable portion.

The duster must be removed before cleaning the carpet.

Do not bend, stamp on, or drag the hose. Do not continue to use the hose if it is damaged. Do not use any heavy or sharp object to press the power cord.

Do not use without dust tank or filters in place. Change tank frequently when picking up very fine materials such as powder.

In winding the power cord, hold the plug before pressing the button of the cord reel. Do not pull the power cord beyond the red warning line, other wise the power cord may be damaged or unable to be wound up. Pay attention to the plug in winding the cord to avoid damaging the surrounding objects.

Illustration of a camera connected to a pink vase with cables (no text or symbols)

Assembling the Cleaner

Parts description and assembly

Telescopic tube Flexible Hose Attachment point Head Button

Accessories

• Dust Brush & Upholstery Nozzle

• Conner Nozzle

- Steam brush head

Hose Telescopic tube

• Sani Punch Measuring cup

Duster Pad

Using Corner Nozzle

Connect the Corner Nozzle to Telescopic Pipe.
▶ Press the Nozzle Separate Button to Separate the nozzle.

Telescopic Pipe Corner Nozzle

Using Dust Brush & Upholstery Nozzle

▶ Tear the vinyl bag and pull out accessories.

Upholstery Nozzle is for vacuuming upholstery, mattresses, etc.

Using and cleaning the Sani Punch

Using the Sani Punch

Use it as shown in the diagram

Assembling

Connect to Hose

Using

最大

Set the suction power control switch to "最大" before vacuuming. Depending on the type of bedding, handing may be awkward or it may cause a lot of noise. If this is the case, adjust the suction power control switch to a lower setting.

Effective cleaning

• bed, bedding, heavy blanket

• Light blanket & sheet

To increase cleaning efficiency for light blankets, lay on top of a bulky blanket and then clean.

• If the punch bar does not move, lift the nozzle slightly off the surface.
• If it does not move, even after doing this, check if the suction power is too low or if the nozzle base is clogged with a foreign object.
  • This Sani Punch nozzle is for effective cleaning of beds and blankets to remove mites and dust.

How to clean the inhaler of the bed cleaner

The vibrator may break down due to the cleansing of the inhaler with water.

If the dust settles in the box while cleaning, press the button 2 or 3 times. (It will remove most of the dust.)

Separate the bottom plate by pressing the buttons in the back.

Vibrator

B Arrange the vibrator in order.

2 After the cleaning, if there are lots of dusts in the box, separate the box from the inhaler by turning it anticlockwise.

3 Empty the box.

⑤ Clean the dirty body of the inhaler carefully with a cloth.

9 Insert the joining spiral into the groove.

Aim at the Spiral, Fix the box into the inhaler by turning it clockwise.

7 Wash the separated bottom plate and dry it in the shade.

10 Attach the bottom plate properly by pressing down.

Removing the Dust Tank

graph TD
    A["Indicator"] --> B["Tank separation lever"]
    B --> C["Pull out"]
    C --> D["Tank handle"]
    D --> E["Dust tank cap"]
    E --> F["Plate opening lever"]

Please empty the dust tank when the power down automatic for 1\~2 minutes then shut down, also with the indicator flash and alarm.

• Turn off the vacuum cleaner and unplug it.
- Grasp the handle of the tank and then press the tankseparation lever.
• Pull out the dust tank.
• Empty the tank and then assemble the dust tank as below

Replacing the Dust Tank

Diagram illustrating vehicle damage and damage process, showing two stages of damage with arrows and labels ① and ②.

Assembling dust tank

First, place the bottom of dust tank on the vacuumcleaner and tilt.

Tank handle Carrier handle

Moving the vacuum cleaner

Don't grasp the tank handle when you are moving the vacuum cleaner. The vacuum cleaner's body may fall when separating tank and body. You should grasp the carrier handle when you are moving the vacuumcleaner.

NOTICE

• If suction power decreases after emptying dust tank, clean dust tank next page.
• Please clean the dust tank when the suction power still low after empty the tank.

Dust Tank

Cleaning the Dust Tank

Tank separation lever Tank handle Dust tank cap Plate opening lever

• Press tank separation lever and pull out dust tank.
• Raise dust tank cap.
  • Dry fully in shade so that moisture is entirely removed.

NOTICE

If suction power decreases after cleaning dust tank, cleanair filter and motor safety filter.

→ Next page.

Line drawing of a mechanical device with no visible text or symbols

Cleaning air filter and motor safety filter

Cleaning air filter and motor safety filter

graph TD
    A["Pre-filter cover"] --> B["Pre-filter assembly"]
    B --> C["Filter cap"]
    C --> D["Air filter"]
    D --> E["Motor safety filter"]
    E --> F["Two "UP" marks must meet"]
    F --> G["Final installation"]

If suction power is decreased after cleaning dust tank, clean air filter and motor safety filter. Air filter and motor safety filter are located at the back of vacuum cleaner in the above figure.

• Open the pre filter cover by pulling the pre filter cover lever and take out pre filter assembly.
• Separate the parts.
• Wash air filter and motor safety filter with water.
• Do not wash filters with hot water.
• Dry fully in shade so that moisture is entirely removed.
  • Air filter and motor safety filter should be cleaned in the above case.

Cleaning exhaust filter

Cleaning exhaust filter

graph TD
    A["Exhaust filter cover"] --> B["White side up"]
    B --> C["White side up with hand holding lid"]

The exhaust filter is a washable and reusable HEPA filter.

• To clean the exhaust filter, remove the exhaust filter cover on the body by rotating it counterclockwise.
• Separate the exhaust filter.
• Wash the filter cleanly in flowing water.
• Remove moisture.
• When filter is washed, make sure not to wash green side of filter.
• Dry fully in shade so that moisture is entirely removed.
  • The exhaust filter should be cleaned at least once a year.

Exhaust filter cover assembling

• Fit exhaust filter cover lugs to the grooves of vacuum cleaner body

Line drawing of a toy car with wheels and a handle, rendered in pink on a solid background (no text or symbols)

Basic use method of the steam vacuum cleaner

The steam vacuum cleaner could realize vacuum cleaning and steam cleaning in the meantime.

Assembling & power switch
Steam safety button shall be held when using steam vacuum cleaning.

The terminals of both the drawtube 2 and the steam brush head 3 shall be aimed and completely assembled until the clicking sound; otherwise it may incur the brush head coming off or discontinuity of steam.
② The hose 1 and the drawtube 2 shall be completely assembled until the clicking sound.
3 Press the steam button 4 on the handle of hose 1 to activate steam cleaning from the steam brush head, which will take 3 minutes after pressing the button at the first time, but to moisten the duster may take more time. The steam button 4 shall be pressed after filling water.
4 Re-press the steam button 4 or press the stop button 5 to stop supplying steam from the brush head.

Note: To prevent any safety accidents when using the steam vacuum cleaner, the cleaner shall automatically power off if you don't press the steam safety button in 30 seconds; Re-press the steam button 4 to continue. In case the steam safety button isn't pressed when the steam brush head is set in motion, the cleaner shall automatically power off in 180 seconds.

* The cleaner could be put into use in 2.5 minutes after pressing the steam button 4 and you could see steam in 3 minutes.

Water-filling method

When filling water, the cleaner shall be unplugged with the hose handle on the floor. After that, you could open the water inlet on the steam brush head.

Illustration of a hand holding a small pink object next to a bottle (no text or symbols)

Fill 250ml water into the steam brush head with the measuring cup and then fasten the cover (Please refer to Page 38 for the detailed instruction). The time to moisten the duster may differ as for different usage or duration of the steam brush head

Illustration of a hand holding a baby bottle with a pink object being placed, showing a correct eye position (no text or symbols)

Duster-sticking method

The cleaner shall be powered off when sticking the duster. Stick the duster on the duster board, and then fix on the steam brush head. Caution of burn when the duster board may still be hot.

graph LR
    A["Image of laptop"] --> B["Add Air Conditioner Unit"]
    B --> C["Hand gesture"]

Aim the suction nozzle at the duster board, and then press down the brush head until the clicking sound. As long as the duster is properly stuck on the duster board, the board could be connected with the suction nozzle of the steam brush head.

The brush head The duster board The duster

Vacuum cleaning / steam cleaning / steam vacuum cleaning

Vacuum cleaning

Illustration of a hand using a vacuum cleaner to lift a small component, with no text or symbols present.

Connect the steam brush head with the drawtube.

Illustration of a child using a vacuum cleaner to clean a vehicle on a paved surface (no text or symbols)

最大 普通 关闭 The function buttons for vacuum cleaning

Press the "最大" or "普通" button, then the vacuum cleaner will begin to work.

Steam cleaning

* It is not fault if there was some water come out when steam nozzle tilted while steam cleaning.

* It is dangerous if you overturn the steam nozzle. There will be some high temperature water and steam.

Illustration of a hand using a vacuum cleaner to lift a small object, with an inset showing the same process (no text or symbols present)

Connect the steam brush head with the drawtube.

Press the "最大" or "普通" button, then the vacuum cleaner will begin to work.

Illustration of a child using a vacuum cleaner to clean a small vehicle (no text or symbols present)

▶ Press the vacuum cleaning button and steam cleaning button respectively to activate steam vacuum cleaning in the meatime; press the stop button to stop such function.

Steam vacuum cleaning

* Only steam nozzle connected, the steam vacuum cleaning is allowed.

Connect the steam brush head with the drawtube.
▶ Pull up the extended tube as per the arrow tip until the clicking sound. Press the steam suction nozzle button, thus the extended tube could be used as required;

Illustration of a hand using a tool to lift a small object, with an inset showing the same step (no text or symbols present)

▶ Press the vacuum cleaning button and steam cleaning button respectively to activate steam vacuum cleaning in the meantime; press the stop button to stop such function.

Illustration of a child using a UV tube to clean a small car on a tiled floor (no text or symbols)

最大 普通 蒸汽 关闭 The function buttons for vacuum cleaning The steam button

Line drawing of a toy car with wheels and handle (no text or symbols)

Floor / ordinary ground cleaning

Stick the duster on the duster board, and then connect with the steam brush head. Missing of duster may cause discoloration or distortion of the floors due to high temperature of the steam brush head. So, the duster shall be properly stuck before use.

Illustration of a pink rectangular device transforming into a vacuum cleaner (no text or symbols)

Switch on the steam brush head and start cleaning after steaming.

Illustration of a cartoon character using a vacuum cleaner on tiled floor (no text or symbols)

Carpet cleaning

The duster board shall be taken off from the steam brush head when cleaning the carpets or sofa; if not, the surfaces of carpets or sofa may be damaged or the duster may not be properly stuck on the board.

Illustration of a hand holding a device next to a pink box (no text or symbols)

Switch on the steam brush head and start cleaning after steaming.

Illustration of a child cleaning a pink towel with a vacuum cleaner (no text or symbols)

Stains removing / floor stains cleaning

Stick the duster on the duster board, and then connect with the steam brush head;

Illustration of a pink rectangular object transforming into a vacuum cleaner (no text or symbols)

Repeat cleaning if it is impossible to clean up the stains once, but the use of steam brush head on the same position for a long period may damage the floors.

Illustration of a hand using a power tool to clean or spray a surface, with no visible text or symbols.

Water filling method

Note: Purified water shall be used for fear of any dirt flowing into the cistern of the vacuum cleaner. Before filling water, the cleaner shall be powered off and unplugged from the socket; also, hose handle shall be put on the floor.

When the indicator of "Water filling" on the brush head flashes, you shall stop cleaning with the steam brush head and unplug from the socket.

Illustration of a washing machine with a close-up view of its side panel (no text or symbols)

Open the water inlet on the brush head and fill proper water with the measuring cup (250ml).

Illustration of a hand holding a pink object over a closed book (no text or symbols visible)

Fasten the water inlet cover on the brush head as per the figure, revolving toward right until the clicking sound.

Illustration of a hand using a power tool to interact with a circular device (no text or symbols present)

When you power on the cleaner after filling water, the indicator of "Water filling" lights up for 30 seconds to 1 minute. You could continue cleaning after the indicator of "steam" lights up.

Method for replacing or washing the duster

Note: The duster shall be replaced after power off.

Take off the duster board from the steam brush head. When replacing the duster, you shall stick the duster with the white side on the board.

Diagram showing transformation of a laptop into a rectangular air conditioner unit, with Chinese labels indicating component names.

Take off the duster board from the steam brush head. When replacing the duster, you shall stick the duster with the white side on the board.

Note:

• Use of duster without completely drying may incur electric shock or damage the cleaner.
• Stick the duster properly, for fear of blocking the suction hole of the steam brush head.
• The time to moisten the duster may differ as for different usage or duration of the steam brush head; replacing a clean duster may make the cleaning easier.

Line drawing of a toy car with wheels and side brackets (no text or symbols)

Maintenance Methods

Pink electrical plug connecting a wall socket to a power outlet (no text or symbols visible)

▶ Turn off the switch and unplug from the socket.

Illustration of hands cleaning a faucet with steam rising (no text or symbols)

Clean and dry the used duster immediately; otherwise it may lead to peculiar smell if placing for some time.

Illustration of a hand using a tool to lift a component on a pink surface (no text or symbols)

The steam brush head shall be maintained on the specific pad rather than directly on the floor when it is still hot; otherwise it may damage the floor.

Illustration of a hand using a cleaning tool to clean water, no text or symbols present

The remaining water in the brush head shall be completely dried, if the cleaner stays idle for a long period. Note: such maintenance shall be done after the brush head is completely cooled up; otherwise it may incur burns or damage the cleaner. Also, the drawtube shall be separated from the brush head first.

If you have a problem

Please check before notifying malfunction

If you doubt the product meets with malfunction, please check the cause of such malfunction before contacting with the after-sales service center or agent, so as to ensure efficiency of repair.

graph TD
    A["Stop steaming?"] --> B["Phase 1"]
    B --> C["Check whether the indicator of "Water-filling" flashes; if so, it is necessary to fill water into the steam brush head with the measuring cup."]
    A --> D["Phase 2"]
    D --> E["Check whether the indicator of "Water filling" flashes. If so, please fill water into the steam brush head with the measuring cup."]
    A --> F["Phase 3"]
    F --> G["Check whether the steam safety button is held when using steam cleaning. On the account of safety, the steam brush head shall automatically power off when the steam safety button is not held for more than 30 seconds. * On the account of safety, this product is designed with a steam safety button. When holding the hose handle, it is easy to hold the steam safety button; if not, the steam brush head shall automatically power off. Re-press the steam button and hold the steam safety button in 30 seconds to restart the steam brush head."]
    F --> H["When using steam cleaning, the steam safety button shall be held. * On the account of safety, the steam brush head shall automatically power off when the steam safety button is not held for more than 30 seconds."]
    H --> I["Re-press the steam button;"]
    I --> J["When the steam brush head automatically powers off,"]

Line drawing of a mechanical device with wheels and a handle, rendered in pink on a solid background (no text or symbols)

If you have a problem

If you have a problem

If a minor problem occurs, it usually can be solved quite easily when the cause is found by using the check list below.

Problem: Suction is weakened and alarm.

The noise Increases and the hose shrink. Suction power is abruptly weakened.

Help: Check the dust tank and suction inlet.

Solution

1 Dust tank full. Empty dust tank.

Is it full? Empty the dust tank in time!

2 Motor filter dirty. Clean the motor filter with brush and water, allow to dry and replace in cleaner.

Is the filter OK? Then check the suction inlet.

③ When checking the suction inlet, adjust the suction level to the maximum.

First step

Turn cleaner off and disconnect from electrical outlet, then disconnect nozzle from telescopic tube. Check if it is blocked, and remove any blockages.

graph TD
    A["If there is still a problem, proceed the second step."] --> B["Second step"]
    B --> C["Disconnect the telescopic tube from hose. Check if it is blocked, and remove any blockages."]
    C --> D["If there is still a problem, proceed the third step."]
    D --> E["If there is also a problem, clean the filter."]
    E --> F["Return on, and/or suction. Reactions."]

Third step

Plug cleaner in, turn on, and check hose end for suction. Remove any obstructions.

If there is also a problem, clean the filter.

If you have a problem

Please check before notifying malfunction

If you doubt the product meets with malfunction, please check the cause of such malfunction before contacting with the after-sales service center or agent, so as to ensure efficiency of repair.

Malfunction Check Troubleshooting

The vacuum does not work?

The vacuum does not work?

Abnormal sound exists inside the vacuum cleaner

Peculiar sme exists inside the vacuum cleaner

Vibration brush head does not work or the amplitude of vibration is too small.

The power cord can not be scrolled thoroughly into the vacuum cleaner or the power cord can not be fully pulled.

The vacuum cleaner or the discharged air is too heat.

Inner wall of the hose is too dirt.

• Is the plug inserted?
• Is the socket powered on?
• If the hose inserted?
- If the motor heat protection opened?

• When the vacuum cleaner's suction is too large or the motor is under high speed running, they do not belong to the abnormal conditions. So, please use the vacuum cleaner properly.
• If it is the noise rather than the normal motor sound, please phone the repair center.

• The duster collector is filled up.
• The filter is clogged.
• Suction inlet is jammed.
- Drawtube is clogged.
- Hose is clogged.

• Insert the plug tight (This product is applicable for 220V)
• Verify the power of socket is on
• Insert the hose tight

• Restart in 2 hours

• Clean out the dust collector.

• Purge the sponge filter with water and air-dry in the shady and cool place for one day.
  • Take out the sucked objects before use.

• Take out the objects inside the drawtube before use.
  • Take out the objects inside the hose before use.

• When the motor is running, the rubber band used for fixing the motor will produce a little smell due to the heat, but it will not affect the operation or damage the machine.

• When the machine sucks some water accidentally or the dust collector is not cleaned for a long period of time, the peculiar smell will be produced. So, clean up the dust collector timely.

• The vibration brush head is used for cleaning the fabric such as bedclothes and sofa.

• The big brush head shall be used for cleaning the carpet.
• Check whether the chassis is properly.
• When cleaning the thin fabric, please pad the thick bedclothes hereunder.
• As cleaning the carpet, sometimes, the machine may not work due to affection from the carpet materials. So, please carry out the operation as required
• Please confirm whether obstruction exists at the dust collector and suction inlet.
  • The amplitude of vibration may be reduced due to the decrease of suction.

• Pull out part of the power cord and then re-scroll it.
- Please put forth your strength to pull out the power cord, which will not be damaged.
- The power cord entwined inside the machine or it is caused by high temperature in the summer.
- The cord is bended inside the machine or not coiled around the winder. After the winder is started, the normal operation could be realized.

Is the suction normal?

- The heat air discharged from the machine is arising from the heat produced by motor. So, the temperature is normal, please use the machine continuously.

- Never suck the water because after mixing of the water and dust, the tube wall will be polluted and the motor will be damaged.

Packing List

Vacuum Cleaner 1

Owner's Manual 1

Upholstery Nozzle 1

Dust Brush&Upholstery Nozzle 1

Steam Nozzle 1

Sani Punch 1

Hose 1

Telescopic tube 1

Conner Nozzle 1

Measuring cup 1

Duster 3

Pads 1

Warranty Card 1

如有问题

请拨打 LG 服务一号通