M55Q7-H61 - Television VIZIO - Free user manual and instructions

Product Type	Television
Brand	VIZIO
Model	M55Q7-H61
Screen Size	55 inches (diagonal)
Display Technology	QLED (Quantum Dot LED)
Resolution	3840 x 2160 (4K Ultra HD)
Refresh Rate	120 Hz (native)
HDR Support	Dolby Vision, HDR10, HLG
Smart Platform	VIZIO SmartCast (built-in Chromecast, Apple AirPlay)
Connectivity	HDMI x3, USB x1, Ethernet, Wi-Fi, Bluetooth
Audio	DTS Virtual:X, 2 x 10W speakers
Dimensions (with stand)	Approximately 48.7 x 30.8 x 10.1 inches
Dimensions (without stand)	Approximately 48.7 x 28.1 x 2.6 inches
Weight (with stand)	Approximately 33.5 lbs
Weight (without stand)	Approximately 32.6 lbs
Power Supply	AC 120V, 50/60Hz
Power Consumption	Typical 120W, standby <0.5W
VESA Mount	300mm x 200mm
Safety Certifications	UL, FCC compliant
Cleaning	Use soft dry cloth, no liquids or chemicals
Spare Parts	Remote control, power cord; contact VIZIO support
Reparability	Professional repair only; no user-serviceable parts

Frequently Asked Questions - M55Q7-H61 VIZIO

How do I connect my VIZIO M55Q7-H61 to Wi-Fi?

Press the Menu button on your remote, navigate to Network settings, select Wi-Fi, choose your network, and enter the password.

How do I perform a factory reset on this TV?

Go to Settings > System > Reset & Admin > Reset TV to Factory Defaults. Confirm the action; the TV will restart and erase all data.

How can I update the firmware on my M55Q7-H61?

Open Settings > System > Check for Updates. If an update is available, follow on-screen instructions to download and install. Ensure the TV is connected to the internet.

What VESA mount size does this TV use and how do I wall mount it?

The VESA pattern is 300mm x 200mm. Use a compatible wall mount kit with appropriate screws (typically M6 x 10-12mm). Always have a professional installer mount the TV to prevent injury or damage.

How do I enable Game Mode for lower input lag?

Press the Menu button, go to Picture Mode, and select Game. Alternatively, in Settings > Picture > Advanced Picture > Game Mode and turn it on.

My remote is not working; what should I do?

First, replace the batteries. If using a Bluetooth remote, press and hold the Pair button for 3 seconds. If still not working, remove batteries and press any button for 10 seconds, then reinsert. Reset the TV by unplugging for 30 seconds.

How do I use Apple AirPlay on the VIZIO M55Q7-H61?

Ensure your iOS device and TV are on the same Wi-Fi network. On your iOS device, tap the AirPlay icon and select your VIZIO TV. The TV will display content from your device. For screen mirroring, enable Screen Mirroring in TV settings.

How do I connect a soundbar to this TV?

Use an HDMI ARC port on the TV and soundbar for best audio. Connect the HDMI cable to the HDMI ARC port on the TV and the ARC port on the soundbar. Alternatively, use an optical audio cable.

What is the native refresh rate of the M55Q7-H61?

The TV has a native 120Hz refresh rate, which provides smooth motion for fast-paced content like sports and gaming.

How should I clean the TV screen without damaging it?

Turn off the TV and let it cool. Use a soft, dry microfiber cloth to gently wipe the screen in a circular motion. Do not use paper towels, liquids, or chemical cleaners, as they can damage the screen.

USER MANUAL M55Q7-H61 VIZIO

Modern flat-screen TV displaying a vibrant, colorful coral and sea scene with floating elements (no text or symbols visible)

VIZIO

M-Series™ Quantum

User Manual

Models:

M50Q7-H1, M50Q7-H61,

M55Q7-H1, M55Q7-H61,

M65Q7-H1 & M65Q7-H61

Table of Contents

Getting to Know Your TV....1

Front Panel....1

Rear Panel 2

Wall-mounting the TV 4

Using the Remote 5

Completing the First-Time Setup 6

Using the On-Screen Menu....7

Navigating the On-Screen Menu 7

Changing the Input Source 7

Adjusting the Picture Settings 8

Adjusting the Color Temperature....8

Changing the Picture Aspect Ratio 9

Adjusting Advanced Picture Settings 9

Adjusting Picture Input Settings....12

Adjusting the Picture Mode Edit Settings....12

Adjusting the Audio Settings 14

Adjusting the Network Settings 15

Setting Up TV Channels. 16

Scanning for TV Channels....16

Skipping Channels....16

Changing the Analog Audio Language 17

Using Parental Controls....18

Accessibility Settings....19

Setting Up Closed Captioning 19

Changing the Appearance of Digital Closed Captions .....19

Changing the System Settings....21

Changing the On-Screen Menu Language 2

Setting the Time 21

Changing the TV Name 22

Renaming Devices on the Input Menu....2

Adjusting the Power Mode 22

Using the USB Power Feature....23

Turning the Power Indicator On or Off....23

Setting Timers 23

Setting a System PIN Code....24

Adjusting the CEC Settings....24

Managing Mobile Devices 24

Using the Admin & Privacy Menu 25

Viewing System Information....25

Checking for System Updates 25

Performing a Soft Power Cycle....25

Restoring the TV to Factory Default Settings....25

Store Demo....25

Viewing Data....26

Managing Advertising Settings 26

View VIZIO Privacy Policy 26

Using the Info Window 27

SmartCast Home™ 28

What is SmartCast Home? 28

How to Launch SmartCast Home 28

What you can do with SmartCast Home....28

Control your TV with the SmartCast Mobile™ App....28

WatchFree ^™ 29

What is WatchFree? 29

What you can do with WatchFree....29

How to Launch WatchFree 29

Playing USB Media....30

Preparing Your USB Drive to Play USB Media 30

Displaying USB Media 30

Removing the USB Drive from the TV 30

Product Registration and Technical Support....34

Help Topics 35

Specifications.... 37

Regulatory Information....38

Limited Warranty 39

Legal Information....41

Safety & Certification

THANK YOU FOR CHOOSING VIZIO

And congratulations on your new VIZIO TV!

To get the most out of your new VIZIO product, read these instructions before using your product and retain them for future reference. Be sure to inspect the package contents to ensure there are no missing or damaged parts.

PRODUCT REGISTRATION

To purchase or inquire about accessories and installation services for your VIZIO product, visit our website at vizio.com or call toll free at [phone].

We recommend that you register your VIZIO product at vizio.com.

WHEN READING THIS MANUAL

TIP: When you see this symbol, please read the accompanying helpful lip.

WARNING: When you see this symbol, please read the accompanying important warning or notice. It is intended to alert you to the presence of important operating instructions.

Color Text — This is the TV menu feature you should be selecting.

Grey Text — This is an action for you to complete, such as entering in a name.

— The arrow sign shows the flow of the steps you should take.
1. Lists additional steps you can take for each selling.
- Bullets give more detailed information about each feature.

IMPORTANT SAFETY INSTRUCTIONS

Your TV is designed and manufactured to operate within defined design limits. Misuse may result in electric shock or fuse. To prevent your TV from being damaged, the following instructions should be observed for the installation, use, and maintenance of your TV. Read the following safety instructions before operating your TV. Keep these instructions in a safe place for future reference.

• To reduce the risk of electric shock or component damage, switch off the power before connecting other components to your TV.
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
• Do not install near any heat sources such as radiators, heat registers, sloves, or other apparatus (including amplifiers) that produce heat.
• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Use only with the cart, island, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

• Unplug the power cord before cleaning your TV.

• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus. The apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

• Unplug this apparatus during lightning storms or when unused for long periods of time.
• When moving your TV from an area of low temperature to an area of high temperature, condensation may form in the housing. Wait before turning on your TV to avoid causing fire, electric shock, or component damage.
• A distance of at least three feet should be maintained between your TV and any heat source, such as a radiator, heater, oven, amplifier etc. Do not install your TV close to smoke. Operating your TV close to smoke or moisture may cause fire or electric shock.
• Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of your TV and to protect it from overheating, be sure these openings are not blocked or covered. Do not place your TV in a bookcase or cabinet unless proper ventilation is provided.
• Never push any object into the slots and openings on your TV cabinet. Do not place any objects on the top of your TV. Doing so could short circuit parts causing a fire or electric shock. Never spill liquids on your TV.
• Your TV should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.
• Do not apply pressure or throw objects at your TV. This may compromise the integrity of the TV. The manufacturer's warranty does not cover user abuse or improper installations.
• The power cord must be replaced when using different voltage than the voltage specified. For more information, contact your dealer.
• When connected to a power bullet, power is always flowing into your TV. To totally disconnect power, unplug the power cord.
• The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un-isolated, dangerous voltage within the inside of your TV that may be of sufficient magnitude to constitute a risk of electric shock to persons.

• Do not overload power strips and extension cords. Overloading can result in tire or electric shock.
• The wall socket should be installed near your TV and easily accessible.
• Only power of the marked voltage can be used for your TV. Any other voltage than the specified voltage may cause fire or electric shock.
• Do not touch the power cord during lightning. To avoid electric shock, avoid handling the power cord during electrical storms.
• Unplug your TV during a lightning storm or when it will not be used for long period of time. This will protect your TV from damage due to power surges.
• Do not attempt to repair or service your TV yourself. Opening or removing the back cover may expose you to high voltages, electric shock, and other hazards. If repair is required, contact your dealer and refer all servicing to qualified service personnel.
• WARNING: Keep your TV away from moisture. Do not expose your TV to rain or moisture. If water penetrates into your TV, unplug the power cord and contact your dealer. Continuous use in this case may result in fire or electric shock.
• Do not use your TV if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your dealer immediately. Do not try to repair your TV yourself.
• Avoid using dropped or damaged appliances. If your TV is dropped and the housing is damaged, the internal components may function abnormally. Unplug the power cord immediately and contact your dealer for repair. Continued use of your TV may cause fire or electric shock.
• Do not install your TV in an area with heavy dust or high humidity. Operating your TV in environments with heavy dust or high humidity may cause fire or electric shock.
• Follow instructions for moving your TV. Ensure that the power cord and any other cables are unplugged before moving your TV.
• To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.
• Insert batteries in accordance with instructions. Incorrect polar ties may cause the batteries to leak which can damage the remote control or injure the operator. Do not expose batteries to excessive heat such as sunshine, fire or the like.
• When unplugging your TV, grab the head of the power plug, not the cord. Pulling on the power cord may damage the wires inside the cord and cause fire or

electric shock. When your TV will not be used for an extended period of time, unplug the power cord.

• To reduce risk of electric shock, do not touch the connector with wet hands.
- This apparatus shall not be exposed to dripping or spashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
- The mains plug or appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

- If any of the following occurs, contact the dealer:

• The power cord fails or frays
• Liquid sprays or any object drops into your TV.
• Your TV is exposed to rain or other moisture.
• Your TV is dropped or damaged in any way.
• The performance of your TV changes substantially.

- CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.

• The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated DANGEROUS VOLTAGE within the product's enclosure that may be of sufficient magnitude to constitute a risk of electrical shock to persons.
• WARNING: Exposure to loud sounds can damage your hearing causing hearing loss andinnitus (ringing or buzzing in the ears). With continued exposure to loud noises, ears may become accustomed to the sound level, which may result in permanent damage to hearing without any noticeable discomfort.
  • Install the TV where it cannot be pulled, pushed or knocked over.
• Do not allow children to hang onto the product.
• Store the accessories (remote, batteries, etc.) in a location safely out of the reach of children.

• The American Academy of Pediatrics discourages television viewing for children younger than two years of age.
- WARNING — Stability Hazard: A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:
- ALWAYS use cabinets or stands or mounting methods recommended by the manufacturer of the television set.
• ALWAYS use furniture that can safely support the television set.
- ALWAYS ensure the television set is not overhanging the edge of the supporting furniture.
• ALWAYS educate children about the dangers of climbing on furniture to reach the television set or its controls.
- ALWAYS route cords and cables connected to your television so they cannot be tripped over, pulled or grabbed.
- NEVER place a television set in an unstable location.
- NEVER place the television set on all furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support.
- NEVER place the television set on cloth or other materials that may be located between the television set and supporting furniture.
- NEVER place items that might tempt children to climb, such as toys and remote controls. on the top of the television or furniture on which the television is placed.
- If the existing television set is going to be retained and relocated, the same considerations as above should be applied.
- Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
• Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.
- A battery subjected to extremely low air pressure that my result in an explosion or the leakage of flammable liquid or gas.
- WARNING: To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.

TELEVISION ANTENNA CONNECTION PROTECTION

The TV shall be installed in accordance with the applicable provisions of Article 820 and Article 820.

If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges.

Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of the grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements of the grounding electrode.

Lightning Protection

For added protection of the TV during a lightning storm or when it is left unattended or unused for long periods of time, unplug the TV from the wall outlet and disconnect the antenna or cable system.

Power Lines

Do not locate the antenna near overhead light or power circuits, or where it could fall into such power lines or circuits. Remember, the screen of the coaxial cable is intended to be connected to earth in the building installation.

Installation of CATV

The installation instructions states the cable distribution system should be grounded (carthod) in accordance with ANSI/NFPA 70, the National Electrical Code (NEC), in particular Section 820.93. Grounding of Outer Conductive Shield of a Coaxial Cable.

Installation of Antenna

The installation instructions states the cable distribution system used for connection to antennas and dishes should be grounded (earthed) in accordance with ANSI/NFPA 70. the National Electrical Code (NEC), in particular Section 810.21, Bonding Conductors and Grounding Electrode Conductors — Receiving Stations.

Ground Clamp Antenna Lead In Wire Antenna Discharge Unit (NEC Section 810-20) Grounding Conductors (NEC Section 810-21) Ground Clamps Electric Service Equipment Power Service Grounding Electrode System (NEC ART 250, part H)

Dolby Vision

Dolby Audio

Dolby, Dolby Vision, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license from Dolby Laboratories. Confidential unpublished works. Copyright © 1992-2019 Dolby Laboratories. All rights reserved.

For DTS patents, see http://patents.dts.com.

Manufactured under license from DTS, Inc. DTS, the Symbol, DTS and the Symbol together, Virtual X, and the DTS Virtual X logo are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights Reserved.

HDMI®

HIGH-DEFINITION MULTIMEDIA INTERFACE

The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

For DTS patents, see http://patents.dts.com.

Manufactured under license from DTS, Inc. DTS, the Symbol, DTS and the Symbol together, DTS HD, and the DTS HD logo are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights Reserved.

1Getting

FRONT PANEL

Modern monitor with a colorful abstract wallpaper displayed on its screen, enclosed in a circular frame (no text or symbols visible)

Modern flat-screen TV displaying a vibrant red coral and blue sea coral with floating stars (no text or symbols visible)

Remote Sensor and Power Indicator

When using the remote, aim it directly at this sensor.

The power indicator flashes on when the TV turns on, then goes out after several seconds.

To keep the power indicator on see Turning the Power Indicator On or Off on page 23.

REAR PANEL

Power

Press to turn on the TV.

Press and hold to turn the TV off.

Volume

Press to increase or decrease the TV volume level.

Input

Press to access the input menu.

Note: The image shows a feature for illustrative purposes only and may be subjected to changes. The actual number of ports and their locations may vary, depending on the model.

HDMI

Connect an HDMI device

Composite

Connect a composite

Audio Out

Connect to an RCA device.

such as sound bar

Coaxial

Connect to a coaxial

cable from cable,

USB

Connect a USB thumb drive to

play photo, music or video

Optical Audio Out

Connect to an optical/SPDIF

device, such as home

audio receiver

Ethernet

Connect an Ethernet cable

a modern/rouler

Connecting a device — AUDIO & VIDEO CABLE TYPES

Your TV can be used to display output from most devices.

1. Verify that your device has a video port that matches an available port on the TV (HDMI, Composite, etc.).
2. Connect the appropriate cable (not included) to the TV and the device.
3. Turn the TV and your device on
4. Set the TV's input to match the connection you used (HDMI-1, HDMI-2, etc.).

HDMI CABLE

COAXIAL CABLE

COMPOSITE (AV) CABLE

Connecting a device — AUDIO CABLE TYPES

Your TV can be output sound to an audio device, such as a receiver or sound bar.

1. Verify that your device has an audio port that matches an available port on the TV (optical, RCA, etc).
2. Connect the appropriate cable (not included) to the TV and the device.
3. Turn the TV and your device on.

HDMI CABLE

COMPONENT AND/OR COMPOSITE CABLE

OPTICAL/SPDIF CABLE

Note: The actual ports and their locations may vary, depending on the TV model.

WALL-MOUNTING THE TV

First you will need a wall mount. Consult the provided table below to find the appropriate mount for your TV.

Be sure the mount you choose is capable of supporting the weight of the TV.

To install your TV on a wall:

1. Disconnect any cables connected to your TV.
2. Place the TV face down on a clean, flat, stable surface. Be sure the surface is clear of debris that can scratch or damage the TV.
3. If attached, remove the stands by loosening and removing the screws.
4. Attach your TV and wall mount to the wall by carefully following the instructions that came with your mount. Use only with a UL-listed wall mount bracket rated for the weight/load of your TV.

TIP: Installing a TV on a wall requires lifting. To prevent injury or damage to the TV, ask someone to help you.

WARNING: Do not use the screws that are included inside the wall mount holes to mount TV.

graph TD
    A["Start"] --> B{Condition}
    B --> C["Downward Arrow"]
    C --> D["End"]
    style A fill:#f9f,stroke:#333
    style D fill:#bbf,stroke:#333
    note right of C
        Note: The image shows here is on channel to purchase only and may be subject to trump. The action number of points and their locations may vary depending on the model.

M50Q7-H1 M50Q7-H61 M55Q7-H1 M55Q7-H61 M65Q7-H1 M65Q7-H61

Screw Size:	M6 M5 M6 M5 M5 M6
Hole Depth:	14 mm 14 mm 14 mm 14 mm 14 mm 14 mm
Hole Pattern:	200 mm x 200 mm 200 mm x 200 mm 300 mm x 200 mm 300 mm x 200 mm 400 mm x 200 mm 400 mm x 200 mm
Weight w/o Stand:	2762 lb (12.53 kg)	2762 lb (12.53 kg)	35.94 lb (16.3 kg)	35.94 lb (16.3 kg)	53.35 lb (24.2 kg)	53.35 lb (24.2 kg)

USING THE REMOTE

Input Change the currently displayed input App Launcher Quickly launch the pictured app Menu Display the settings menu WatchFree™ Access WatchFree channels (not available in Canada) Navigation Buttons — Left / Right Navigate the on-screen menus Navigation Buttons — Up / Down Navigate the on-screen menus Back Go to the previous on-screen menu Volume Up/Down Increase or decrease the loudness of the audio Number Pad Manually enter a channel Pic Cycle through the different picture setting modes Long press to enabled/displace rail back feature INPUT MENUINFO Ask Free OK BACKCC VOL PREV CH 123 456 7 8 9 PIC 0 Power Turn television on or off Info Display the info window OK/Play/Pause Select the highlighted menu option and play or pause content Home Button Launch SmartCast Home™/Return to SmartCast Home Screen Closed Caption Enable or disable close caplining Long press to open Accessibility menu featuring captions, talk back, speech rats, and zoom mode Channel Up/Down Change the channel Last Return to the channel last viewed Mute Turn the audio on or off Dash Use with number pad to manually enter a digital sub- channel (for example, 18-4 or 18-5)

Replacing the Batteries

1. Push the battery of the battery compartment and lift battery cover to open.
2. Insert two batteries into the remote control. Make sure that the (+) and (-) symbols on the batteries match the (+) and (-) symbols inside the battery compartment.
3. Replace the battery cover and click to close.

Push Lift AAA AAA

In many places batteries cannot be thrown away or discarded with household waste. Please ensure you properly dispose of your batteries consistent with the loss and/or regulate/loss where you live. For more information please visit www.nics.com/environment

WARNING: Keep the remote control batteries away from children. It may cause choking and/or lead to a fire or chemical burn if mishandled. Do not dispose of batteries in fire. Replace only with batteries of the correct type.

TIP: When needed, VIZO recommends replacing the batteries that came with this remote with two, new Duracell 'AAA' alkaline batteries.

POWER UP WITH DURACELL

2Comple

Before you begin the first-time setup:

• Your TV should be installed and the power cord should be connected to an electrical outlet.
• If you have a wireless network, have the network password ready.
• If you are connecting to your network with an Ethernet cable, connect it to the Ethernet port on the TV.

The first time you turn on the TV, the on-screen instructions will guide you through each of the steps necessary to get your TV ready for use.

Online language for your 79 2014 For You Available

1 Choose your language. Pressing the CC button will enable TTS (text-to-speech) functionality.

How and you use your PC? I am the ... I can't know

1. Choose home use.

set to pay extra pay code set Security peer

1. Choose your country.

Choose a Hi-Fi Network. Hi-Fi Network Hi-Fi Network Hi-Fi Network Hi-Fi Network Hi-Fi Network Hi-Fi Network Hi-Fi Network Hi-Fi Network Hi-Fi Network Hi-Fi Network Hi-Fi Network Hi-Fi Network Hi-Fi Network Hi-Fi Network Hi-Fi Network Hi-Fi Network Hi-Fi Network Hi-Fi Network Hi-Fi Network Hi-Fi Network Hi-Fi Network Hi-Fi Network Hi-Fi Network Hi-Fi Network Hi-Fi Network Hi-Fi Network

4 Choose your Wi-Fi network and enter the password.

What user is your video TV installed? How much Lack out Made Cable Get it best 30 minutes now

1. Name your TV.

Let's start of local forms A: 100%

1. Scan for channels.

Theme & Conditions Add to the Content Add to the Content Add to the Content Add to the Content

1. Accept the Terms & Conditions.

WANGXI Agricultural Research Institute's 2017 Agricultural Research Institute's 2018 Agricultural Research Institute's 2019 Agricultural Research Institute's 2020 Agricultural Research Institute's 2021 Agricultural Research Institute's 2022 Agricultural Research Institute's 2023 Agricultural Research Institute's 2024 Agricultural Research Institute's 2025 Agricultural Research Institute's 2026 Agricultural Research Institute's 2027 Agricultural Research Institute's 2028 Agricultural Research Institute's 2029 Agricultural Research Institute's 2030 Agricultural Research Institute's 2031 Agricultural Research Institute's 2032 Agricultural Research Institute's 2033 Agricultural Research Institute's 2034 Agricultural Research Institute's 2035 Agricultural Research Institute's 2036 Agricultural Research Institute's 2037 Agricultural Research Institute's 2038 Agricultural Research Institute's 2039 Agricultural Research Institute's 2040 Agricultural Research Institute's 2041 Agricultural Research Institute's 2042 Agricultural Research Institute's 2043 Agricultural Research Institute's 2044 Agricultural Research Institute's 2045 Agricultural Research Institute's 2046 Agricultural Research Institute's 2047 Agricultural Research Institute's 2048 Agricultural Research Institute's 2049 Agricultural Research Institute's 2050 Agricultural Research Institute's 2051 Agricultural Research Institute's 2052 Agricultural Research Institute's 2053 Agricultural Research Institute's 2054 Agricultural Research Institute's 2055 Agricultural Research Institute's 2056 Agricultural Research Institute's 2057 Agricultural Research Institute's 2058 Agricultural Research Institute's 2059 Agricultural Research Institute's 2060 Agricultural Research Institute's 2061 Agricultural Research Institute's 2062 Agricultural Research Institute's 2063 Agricultural Research Institute's 2064 Agricultural Research Institute's 2065 Agricultural Research Institute's 2066 Agricultural Research Institute's 2067 Agricultural Research Institute's 2068 Agricultural Research Institute's 2069 Agricultural Research Institute's 2070 Agricultural Research Institute's 2071 Agricultural Research Institute's 2072 Agricultural Research Institute's 2073 Agricultural Research Institute's 2074 Agricultural Research Institute's 2075 Agricultural Research Institute's 2076 Agricultural Research Institute's 2077 Agricultural Research Institute's 2078 Agricultural Research Institute's 2079 Agricultural Research Institute's 2080 Agricultural Research Institute's 2081 Agricultural Research Institute's 2082 Agricultural Research Institute's 2083 Agricultural Research Institute's 2084 Agricultural Research Institute's 2085 Agricultural Research Institute's 2086 Agricultural Research Institute's 2087 Agricultural Research Institute's 2088 Agricultural Research Institute's 2089 Agricultural Research Institute's 2090 Agricultural Research Institute's 2091 Agricultural Research Institute's 2092 Agricultural Research Institute's 2093 Agricultural Research Institute's 2094 Agricultural Research Institute's 2095 Agricultural Research Institute's 2096 Agricultural Research Institute's 2097 Agricultural Research Institute's 2098 Agricultural Research Institute's 2099 Agricultural Research Institute's 2100

1. View and accept VIZIO Viewing Data Policy.

Using the On-Screen Menu

Your TV features an easy-to-use on-screen menu.

To open the on-screen menu, press the MENU button on the remote.

From this menu, you can.

• Adjust the picture settings
• Adjust the audio settings
• Adjust the network settings
• Adjust the TV channel settings
• Adjust accessibility settings
• Adjust TV system settings
  • Access admin and privacy settings
  • View the user manual

TV Settings

① -20
[Unreadable]
合
schoele
T
-
50064780
5

NAVIGATING THE ON-SCREEN MENU

To open the on-screen menu.

1. Press the MENU button on the remote.
2. Use the Navigation buttons to highlight a menu option, and press the OK button to select that option.

TIP: While navigating the on-screen menu, you can press the BACK button at any time to return to the previous menu screen.

CHANGING THE INPUT SOURCE

External devices, such as DVD players, Blu-ray players, and video game consoles, can be connected to your TV. To use one of these devices with your TV, you must first change the input source using the input menu.

I o change the input sources:

1 Press the INPUT button on the remote. The input menu is displayed.
2. Use the Navigation buttons or the INPUT button on the remote to highlight the input you wish to view. The corresponding inputs are named on the back of your TV.
3 Press OK or release the INPUT button. The selected input is displayed.

Change Input SMARTOAST HOME HOME 2 COMP TWO BUSINESS HOME 1

Input Name

The underlined input on the left is the current input selected. Inputs may vary by TV.

TIP: You can change the input names that appear on the Input menu to make your devices easy to recognize. See Renaming Devices on the Input Menu on page 22.

ADJUSTING THE PICTURE SETTINGS

Your TV can be adjusted to suit your preferences and viewing conditions.

To adjust the picture mode settings:

Menu > Picture > Picture Mode

1. Use the Navigation buttons on the remote to highlight Picture Mode, then use the Left/Right Navigation buttons to change the picture mode:
2. Vivid — Sets the picture settings to values that produce a brighter, more vivid picture.
3. Bright — Sets the picture settings to values ideal for watching TV in a brightly lit room.
4. Calibrated — Sets the picture settings to the default settings.
5. Calibrated Dark — Sets the picture settings to values ideal for watching TV in a dark room.
6. Game — Reduces throughput delays and optimizes the picture settings for displaying game console output. Also the preferred picture mode for computer mode.
7. Sports — Sels the picture settings to values ideal for watching sport events with motion control setting

TIP: If you save changes to the setting for a picture mode, an asterisk will appear after its name. See Saving a Custom Picture Mode on page 12.

2 To manually change each of the picture settings, use the Up/Down Navigation buttons on the remote to highlight that picture setting, then use the Left/Right Navigation buttons to adjust the setting.

• Ambient Light Sensor — Detects your room's light level and automatically adjusts the background. Select Low for the darkest picture or High for the brightest picture. Select Off for manual backlight control.
• Backlight (SDR content) or Tone Mapping (HDR content) — Adjusts the LED brightness to affect the overall brilliance of the picture.
• Brightness — Adjusts the black level of The picture. When this setting is too low, the picture may be too dark to distinguish details. When this setting is too high, the picture may appear faded or washed out.
• Contrast — Adjusts the white level of the picture. When this setting is too low, the picture may appear dark. When this setting is too high, the picture may appear faded or washed out. If the setting is too high or too low, detail may be difficult to distinguish in dark or bright areas of the picture.
  • Color — Adjusts the intensity of the picture colors.
• Tint — Adjusts the hue of the picture. This setting is useful in adjusting the flesh tones in the picture. If flesh appears too orange, reduce the level of color before adjusting tint.
• Sharpness — Adjusts the edge sharpness of picture elements. It can be used to sharpen non-HD (high definition) content; however, it will not produce detail that does not otherwise exist.

Picture
Text and Style	Balance
Style and Color	Low
Background
Performance
Contrast
Color
Test
Performance
Stroke (Impulsive)	Normal
Color (Impression)	Normal
Advanced Picture

Adjusting the Color Temperature

Adjusting the color temperature changes the white balance of the picture.

To adjust the color temperature:

Menu > Picture > Color Temperature

Use the Navigation buttons on the remote to highlight a color temperature preset and then press OK.

• Warm — Produces an orange-hued picture.
  • Cool — Produces a blue-hued picture.
  • Normal — Optimized for television viewing.

Color Temperature

% OFF

105

-0.017

Changing the Picture Aspect Ratio

To change the screen aspect ratio.

Menu > Picture > Picture Aspect

Use the Navigation buttons to highlight the aspect ratio you wish to view.

Your TV can display images in different modes:

• Normal (default) — No change to aspect ratio.
• Panoramic *— Stretches a 4:3 image to fill 16:9 screen with an algorithm so the center doesn't look stretched.
• Wide — Stretches a 4:3 aspect ratio to fill 15:9 screen. If a 16:9 image, adds black bars to top and bottom.
• Zoom — Expands image both horizontally and vertically by 14%
• Stretch '— When the 16:9 signal is a 4:3 image with black bars left and right, stretches to fill the screen.

Some programs have black bars on the top or sides of the screen so that the picture keeps its original shape. Examples include widescreen movies and older TV programs.

Grayscale landscape illustration with trees, hills, and a lake (no text or symbols)

TIP: The aspect ratio cannot be changed for Ultra HD content or HDR content.

^1 Available effect is so still drops may vary by red water. In terms of made water only available for saturated oxidation, V (400s/400p) and SODA/mix is only aerobic or rapamidation. V (700s/1000s/250p).

Adjusting Advanced Picture Settings

To adjust advanced picture settings:

Menu > Picture > Advanced Picture

Use the Navigation buttons to highlight the setting you wish to adjust, then press the Left/Right Navigation buttons to change the setting:

• Black Detail — Adjusts the average brightness of the picture to compensate for large areas of brightness
• Super Resolution — Configures the resolution to enhance dim and blurred pictures resulting in a sharper image
• Edge Enhancement — Increases the smoothness of edges.
• Local Contrast — Adjust the contrast of the picture locally.
• Active Full Array "— Based on the content, dynamically adjusts and balances the brightness and the contrast ratio of the picture by locally adjusting backlight zones."
• Motion Control:

- Clear Action: Reduces blur in scenes with fast action but limits the range for the Backlight selling.

- Reduce Noise:

• Signal Noise: Reduces background picture noise when viewing analog sources. This function helps to correct "speckle" noise with a slight reduction in sharpness.
• Block Noise: Reduces the side effects of digital compression such as "blocking" and noise on sharp edges. The high setting will cause a slight reduction in sharpness.
• Contour Smoothing: Removes visible contour noise without loss of the complex detail

Advanced Picture
Black and White	61"
Clean Transportation	Not too
Global or less ambient	None
Lowest Chemicals	None
Airflow & Airflow2)	Not too
Airflow Control
Airflow No. 35
Airflowing Engine3)
Air for Models	No
Camera	31" - Not too
Extracoded Clearing units	0"

- ProGaming Engine

• Game Low Latency: Select Auto or On to reduce video delay (lag) when gaming.

• Variable Refresh Rate: Adjusts the refresh rate of the screen based on the content.
  • Game HDR: Optimizes picture quality for HDR game.

• Film Mode — Optimizes the picture for watching films. Select On or Off

• Gamma — Set the shape of the Gamma curve. Use lower Gamma values for bright room conditions, and higher values when it's dark.
• Enhanced Viewing Angle — Increases the viewing angle with richer colors and a higher contrast image. This mode reduces horizontal resolution.
  • Color Calibration — Calibrate colors using HSB, gain, offset and 20 point while balance and test or reset colors to defaults.

Adjusting the Color Tuner Settings

The Color Tuner settings allow you to adjust the color management system. 20 point white balance, turn color channels off for testing, and display SMPTE, flat, ramp, and uniformity analyzer test patterns.

To access the color tuner table:

Menu > Picture > Advanced Picture > Color Calibration > Color Tuner

WARNING: The Color Tuner, 20 Point While Balance, and test patterns allow technicians to manually calibrate the TV. Calibration requires specialized training, an input with precisely set colors, and a specialized light meter.

To turn color channels off and on:

1. Use the Navigation buttons on the remote to highlight Red, Green, or Blue
2. Press the OK button to turn the color channel off or on. An X appears over a color channel that has been turned off.
3. Only two color channels can be turned off at the same time.

TIP: Any changes made affect the color temperature setting. Select the preferred color temperature setting first. See Adjusting the Color Temperature on page 8.

To adjust the color management system/20 point white balance settings:

1. Use the Navigation buttons on the remote to highlight the Hue. Saturation. Brightness. Offset, or Gain of the color you wish to adjust. Press the OK button.
2. Use the Left/Right Navigation buttons to adjust the value. When you are finished press the OK button to save the setting.

Color-Tuner
	Red Green Blue Cyan Magenta Yellow
Hue 0 500 25 14
Saturation-1 5-4 0-2 0
Religiveness	>24	0	>22	0	6	0
Diffuse	0 0 0
Gain	0 0 0

To adjust the 20 Point White Balance settings:

1. From the Color Tuner table, use the Navigation buttons to highlight the top bar and then press the Left/Right Navigation buttons until the 20 POINT WHITE BALANCE menu is displayed.

20 Units: White Beverage
	Green Bars	Green Blue
	5% C	DC

4 Use the Navigation buttons on the remote to highlight the Gain and Color values you wish to adjust. Press the OK button and use the Left/Right Navigation buttons to adjust the value. When you are finished, press the OK button to save the setting.

To show or hide the SMPTE Test Pattern:

Menu > Picture > Advanced Picture > Color Calibration > Color Tuner > SMPTE Test Pattern

1. Use the Navigation buttons on the remote to highlight Off. Use the Left/Right Navigation buttons to select On to show the SMPTE Pattern.

-Cl-

1. To hide the SMPTE Test Pattern, use the Left/Right Navigation buttons to select Off.

To show or hide the Flat Test Pattern: Menu > Picture > Advanced Picture > Color Calibration > Color Tuner > Flat Test Pattern

1. Use the Navigation buttons on the remote to highlight Off. Use the Left/Right Navigation buttons to select the percentage brightness for the flat lost pattern. Selecting a percentage immediately shows the flat pattern at that brightness.

or

2 To disable the Flat Test Pattern, use the Left/Right Navigation buttons to select Off.

To show or hide the Ramp Test Pattern: Menu > Picture > Advanced Picture > Color Calibration > Color Tuner > Ramp Test Pattern

1 Use the Navigation buttons on the remote to highlight Off. Use the Left/Right Navigation buttons to select the color for the ramp test pattern. Selecting a color immediately shows that color ramp.

or

1. To hide the Ramp Test Pattern, use the Left/Right Navigation buttons to select Off.

To show or hide the Uniformity Analyzer Test Pattern: Menu > Picture > Advanced Picture > Color Calibration > Color Tuner > Uniformity Analyzer Test Pattern

1. Use the Navigation buttons on the remote to highlight Off. Use the Left/Right Navigation buttons to select On to show the Uniformity Analyzer Test Pattern.

2. To hide the Uniformty Analyzer Test Pattern, use the Left/Right Navigation buttons to select Off.

Adjusting Picture Input Settings

Enable HDMI Mode. Full Color 4:4:4. Filmmaker Mode and adjust picture size and position.

To adjust the Input settings:

Menu > Picture > Input Settings

Use the Navigation buttons to highlight the setting you wish to adjust.

• Picture Size and Position * — configure the display size and position of the picture to the screen.
• HDMI Mode ' — Expanded color display. Only available for an HDMI input.
• Full Color 4:4:4 *—Maintains full color data with 4:4:4 content. Some picture settings will not be available when this setting is On. Only available for an HDMI input.
• Filmmaker Mode — Adjusts picture settings to provide a viewing experience of a movie as the director intended.
  • Color Space Range — Select Color Space for the source. Video sources uses YCbCr, but PC uses RGB.

Adjusting the Picture Mode Edit Settings

Manage custom picture modes and reset preset picture modes.

To adjust the Picture Mode Edit settings:

Menu > Picture > Picture Mode Edit

Use the Navigation buttons to highlight the setting you wish to adjust, then press OK to change the setting:

- Save Picture Mode — Save a custom picture mode.

• Copy Picture Mode — Copy the settings for a custom picture mode.
- Lock Picture Mode—Prevent changes to custom picture modes.
- Reset Picture Mode—Reset the picture mode settings to factory default values. Only available on customized preset modes.
- Delete Picture Mode—Delete a custom picture mode. Inputs assigned to the custom picture mode will use the Galbrailed picture mode.

Saving a Custom Picture Mode

Custom picture modes allow you to save a group of custom settings for various viewing conditions and video sources.

To save a custom picture mode:

Menu > Picture > Picture Mode Edit > Save Picture Mode > Enter a Name >Save

Custom picture modes allow you to save a group of custom settings for various viewing conditions and video sources.

• Changes made while on any preset picture mode will add an asterisk on the top right corner of the preset mode.
  • The custom picture mode is not automatically saved.
• Changes made while on any preset picture mode will add an asterisk on the top right corner of the preset mode.
  • The custom picture mode is not automatically saved.

Custom picture modes allow you to save a group of custom settings for various viewing conditions and video sources.

Save Picture Mode — S 0 C 0 p f g h i 1 k l m n o p q r 2 l u v w x y z o 1 2 3 4 5 6 / 8 9 SW G rel Space 43

On p available, Istra is an initial search. Not available for WaterFrost. Menu nets will be grayed out if not available.

Copy a Picture Mode

Custom picture mode settings can be copied to be applied to other inputs.

1. Complete the desired changes for the selected picture mode.
2. Select Save Picture Mode to save picture mode for all inputs.
3. Select the input you want to copy your saved picture mode edits to.
4. Change the picture mode to your custom saved mode: Menu > Picture > Picture Mode > select saved custom picture mode
   4 Copy your custom picture mode: Menu > Picture > Picture Mode Edit > Copy Picture Mode
5. Select what picture mode you would like to copy over.
6. A notification displays after the copy to your selected picture mode is completed. Now this picture mode will have your custom settings saved over it for the selected input.
7. Repeat as needed to customize additional inputs.

Lock a Picture Mode

Custom picture modes can be locked/unlocked with a unique PIN to prevent accidental changes to their settings. If not previously set, you can set up your system PIN code here.

To lock all custom picture modes:

Menu > Picture > Picture Mode Edit > Lock Picture Mode > On > Enter Your PIN > Save

To unlock all custom picture modes:

Menu > Picture > Picture Mode Edit > Lock Picture Mode > Off > Enter Your PIN

Lock Picture Mode Create a picture control of TIN as preprint changes small or very small pixels Live Mail Send to Mail

Deleting a Picture Mode

Custom picture modes that are no longer needed can be deleted.

TIP: Inputs assigned to deleted custom picture modes become assigned to the Calibration picture mode.

To delete a custom picture mode:

Menu > Picture > Picture Mode Edit > Delete Picture Mode > Delete

Resetting a Picture Mode

A preset picture mode that has been edited can be restored to the factory default settings.

To reset a customized preset picture mode:

Menu > Picture > Picture Mode Edit > Reset Picture Mode > Reset

TIP: To set a custom PIN code, seeSetting a System PIN Code on page 24.

ADJUSTING THE AUDIO SETTINGS

To adjust the audio settings:

Menu > Audio

Use the Navigation buttons to highlight the setting you wish to adjust, then press Left/Right Navigation buttons to change the setting:

• TV Speakers — Built in speakers automatically turn off if a sound bar is discovered. Turn the built in speakers On or Off.
• Surround Sound — When set to On, enables surround sound suitable for sports and TV shows. VirtualX ^+ adds virtualized height best for movies.
  • Volume Leveling — When set On, DTS TruVolume* audio solution levels the speaker volume
  • Balance — Balance the audio loudness between the left and right speakers.
• Lip Sync — Synchronize the display image with the audio track.
• Digital Audio Out — Select the digital audio output format for both the optical and HDMI ARC audio devices.

- To hear talk back when Talk Back function is enabled, digital audio out must be set to PCM.

TIP: You must select Digital for audio with more than two channels (e.g., 3.0, 5.0, or 5.1)

• Analog Audio Out — Select Variable if you are controlling the volume with the remote. Select Fixed if an external audio device (sound bar or AV receiver) will control the volume.
• Dialogue Enhancer — If enabled and the signal source includes Delby 5.1 AC-4 audio then clarity of dialogue is enhanced
• eARC — Toggle between ARC (Off) and eARC (On) for audio output using HDMI 1. If On, audio is sent using eARC and is uncompressed. If Off, audio is sent using ARC and some audio formats may play in standard Dolby Audio. DTS Digital Surround, or PCM

TIP: Your connected sound bar or audio receiver must support eARC in order to receive uncompressed audio. Check your device's user manual for more information.

- Equalizer — Only available when Surround Sound is set to OFF. Boosts or attenuates loudness at different frequencies.

ADJUSTING THE NETWORK SETTINGS

Your TV is Internet-ready, featuring both an Ethernet port and built-in high-speed wireless internet.

TIP: If your TV is connected to a network with an ethernet cable, you will not see the wireless network connection menu. You must unplug the Ethernet cable to set a wireless network connection.

Connecting to a Wireless Network

To connect to a wireless network whose network name (SS-D) is being broadcast:

Menu > Network >

Choose your network > Enter in the password > Connect

A. 1920

Поситекта

Hana Delap Hindi betanery, Text Innovation

To forget a saved network:

Highlight a saved wireless access point > OK > Forget

If you do not see your wireless network displayed, click on:

More Access Points > Highlight your wireless network > Enter in the password > Connect

Changing the Manual Setup Settings

Advanced users can fine-tune the network settings using the Manual Setup feature. The security settings on your router may require you to enter the TV's MAC address.

To change advanced network settings:

Menu > Network > Manual Setup > DHCP > Off

1. Use the Navigation and OK buttons to adjust each setting:
2. IP Address — The IP address assigned to the TV
3. Subnet Mask — The subnet Exit 2D.
4. Default Gateway — Your network's default gateway address.
5. Pref. DNS Server — Your preferred domain name server address.
6. AIL DNS Server — Your alternate domain name server address.
7. Use the Navigation balloons on the remote to highlight Save and press OK.

To find the TV's MAC address:

Menu > Network > Manual Setup

You can find your TV's MAC address at the bottom of the list. The MAC addresses for the connections in use are displayed.

• RJ45 MAC — The Ethernet or RJ45 MAC address may be needed to set up your network when you have connected the TV to your network when you have connected the TV to your network with an Ethernet (Cat 5) cable.
• Wireless MAC — The wireless (W-F) MAC address may be needed to connect your TV to your network with W-F

Manual Setup

CLIP	Classical
Purpura	----
Sarmonia	----
Cebal Salcoma	----
Endoscopy	----
Asthma	----
PLASTA	010000
Chloroplast	010000

Connecting to a Hidden Network

To connect to a wireless network whose network name (SSID) is not being broadcast.

Menu > Network > Hidden Network > Enter the Access Point Name > Connect > Enter in the password

Testing Your Network Connection

To test your network connection.

Menu > Network > Test Connection

Enter Access Point Name

SETTING UP TV CHANNELS

You can use the TV's Channels menu to:

• Find channels
  • Find new channels
• Select channels to skip
• Select analog audio mode
• Select the language for digital audio
• Set parental controls

TV Channels

real change

First line channels

Sapachette

exclig 2010

Eq. 100

SWM

序号

名称

Scanning for TV Channels

The TV may need to scan for channels before it can display programs and their associated information. A channel scan is required for free over-the-air channels (using an antenna) and cable channels from an out of the wall connection (without a cable box). Moving the TV to an area with different channels requires the TV to scan for channels again.

To perform an Auto Channel Scan:

Menu > TV Channels > Find

Channels

Wait until the channel scan is 100% complete.

Highlight Done and press OK.

- If the channel scan is canceled, the channels that were already discovered are retained.

Find Channels

Chamala Ponsal
Country	×
Average	12
45% Complete

Skipping Channels

After a channel scan is completed, you may find that some channels are too weak to watch comfortably. There may also be some channels you do not want to view. You can remove these channels from the TV's memory with the Skip Channel feature.

WARNING: Channels that have been removed with the Skip Channel feature can still be viewed if the channel is entered using the number pad.

If you wish to completely block a channel from being viewed, use see Locking and Unlocking Channels on page 18.

To remove a channel:

1. From the TV CHANNELS menu, highlight Skip Channel, and press OK. The SKIP CHANNEL menu is displayed.
2. For each channel you wish to remove, use the Up/Down Navigation buttons on the remote to highlight the channel and press OK. A √ appears to the right of each channel you select.

Skip Channel

2	Test 2
1	Test 1
2	Test 2
3	Test 2
4	Test 4

To perform a New Channel Scan:

Menu > TV Channels > Find New Channels

A New Channel Scan saves the current channel map and scans for additional channels.

Changing the Analog Audio Language

Some analog over-the-air (free) and cable channels broadcast programs in more than one language. The TV's Analog Audio feature allows you to listen to audio in an alternate language using Secondary Audio Programming (SAP).

To use the Analog Audio feature:

Menu > TV Channels > Analog Audio

WARNING: Not all programs are broadcast in SAP. The Analog Audio Language feature only works when the program being viewed is being broadcast with Secondary Audio Programming.

• Stereo — More than one speaker channel is being used. Sounds may be dispersed through different speakers depending on how the audio is programmed.
• SAP (Secondary Audio Program) — Typically used for audio in a different language other than the native one used in the program.
• Mono — All speakers are producing the same sound; there is no distinction between left or right sounds.

Analog Audio 50.000 2.4MP 50.000

To use the Digital Language feature:

Menu > TV Channels > Digital Audio

Select the preferred audio language. Available languages or video description depend on the broadcast content.

Digital Audio Digital A new digital audio project Copyright

Using Parental Controls

The TV's parental controls allow you to prevent the TV from displaying certain channels or programs unless a PIN is used.

Accessing the Parental Controls Menu

To access the Parental Controls menu you must first set up a system PIN:

Menu > TV Channels > Parental Controls > Enter in PIN

TIP: to set a custom PIN code, see Setting a System PIN Code on page 24.

The Parental Controls menu only appears when:

- You are using the tuner to receive your TV signals, such as when you are using an antenna for Over the Air signals or when connected to cable TV directly from the wall (no cable box).

- You have a device connected using a composite video cable or a coaxial cable, such as a VCR, satellite or cable box, or DVR.

TIP: Other devices have their own parental control settings.

Enabling or Disabling Program Ratings

To manage program content according to its rating, you must first enable the Program Rating feature.

To enable or disable the Program Rating feature:

Menu > TV Channels > Parental Controls > Locks > Off/On

Locking and Unlocking Channels

When a channel is locked, it cannot be accessed. Looking a channel is a good way to prevent children from viewing inappropriate material.

To lock or unlock a channel:

Menu > TV Channels > Parental Controls > Channel Locks

Highlight the channel you want to look or unlock and press OK.

- When a channel is locked, the Lock icon appears locked. The channel is not accessible unless the system PIN is entered.

- When a channel is unlocked, the Lock icon appears unlocked

Blocking and Unblocking Content by Rating

A channel may sometimes broadcast programs that are meant for a variety of audiences (some for children and some for adults). You might not want to block the channel completely using a channel lock, but you can block certain programs from being viewed.

You can use the TV's Rating Block feature to block content based on its rating.

To block or unblock content by its rating:

1. From the Parental Controls menu, highlight the content type you want to adjust and press OK:
   • USA TV — USA television program broadcasts.
   • USA Movie — USA movie broadcasts.
   • Canadian English — Canadian English television program broadcasts.
   • Canadian French — Canadian French television program broadcasts.

TIP: For a list of content ratings and their definitions, please visit www.lvguidelines.org

1. For each rating type you want to block or unblock, use the Navigation buttons to highlight the rating type and press OK.
2. When the rating type is blocked, the lock icon appears 🔒 locked. Content with this rating and all higher ratings cannot be viewed.
3. When the rating type is unblocked, the Lock icon appears 🔒 unlocked. Content with this rating and all lower ratings can be viewed.
4. If you want to block all unrated content, highlight Block Unrated Shows and use the Navigation buttons on the remote to select On.

ACCESSIBILITY SETTINGS

VIZIO is committed to providing intuitive, user-friendly products. Your new VIZIO TV offers several accessibility features that can help you with easy navigation.

To access the Accessibility menu:

Menu > Accessibility

1. Captions — Activate and customize analog and digital closed captions.
2. Video Description — if included by the broadcaster, provides a narrated description of the action for the content.
3. Talk Back — Enables your TV to speak all settings changes and adjustments using the remote in English.
4. Speech Rate — Adjusts the rate in which Text-to-Speech is spoken. Select Slow, Normal (default), or Fast.
5. Zoom Mode — Enlarges a section of the screen by approximately 200%.

Accessibility

Ca, Ca, Ca
100% Ca, 200% Ca	CF
Talk Data	CF
Spread Data	Not real
Water Map	CF

TIP: You can also enable/disable accessibility features using the included remote. See Using the Remote on page 5.

To access the Video Description menu:

Menu > Accessibility > Video Description > Off/On

Setting Up Closed Captioning

Your TV can display closed captions for programs that include them. Closed captions display a transcription of a program's dialogue.

TIP: Closed Captioning is available for tuner, composite and streaming content (if supported by the app). Note that most apps will support their own CC from within the app.

To activate or deactivate Close Captions for current content:

Menu > Accessibility > Captions > Closed Captions > Off/On

-or-

Push the CC button to the remote.

1. Use the Navigation buttons on the remote to highlight either Analog or Digital Closed Captions.
2. Use the Left/Right Navigation buttons on the remote to select the caption channel you wish to display.

Closed Captions

Class Cachette	2#
Average Class Cachette	0.21
Digital Sound Spencer	0.34
Digital Style

TIP: The Closed Captions menu does not appear when an HDMI input is selected. Close captions are available when using the tuner or a composite video cable.

2 Use the Up/Down Navigation buttons on the remote to highlight the setting you wish to change, then use the Left/Right Navigation buttons to change the settings (choose 'As Broadcast' to keep default setting);
- Text Style — Change the font used for the closed captioning text.
- Text Size — Make the text larger or smaller. - Text Color — Change the color of the text.
- Text Opacity — Change the transparency of the text.
- Text Edges — Change the effects at the edges of the text, such as raising the edges or adding drop shadows.
- Text Edges Color — Change the color of the text edge effects.
- Background Color — Change the color of the background directly behind the text.
- Background Opacity — Change the transparency of the background directly behind the text.
- Window Color — Change the color of the closed captioning box.
• Window Opacity — Change the opacity of the closed captioning box.

Typical choices include:

• Opaque background, transparent window — Only a strip of background appears behind the text, expanding as the text appears. This is the typical "As Broadcast" mode.
• Opaque background and window in the same color — When text appears, the entire line fills with color at once;

In the example, the closed caption text is green, the background is black, and the window is red.

Text Background Window CLOSED CAPTION TEXT SAMPLE

CHANGING THE SYSTEM SETTINGS

Using the System menu, you can:

• Change the on-screen menu language
• Set the time zone and local settings
• Name the TV
• Name an input
• Hide inputs not in use
• Adjust the power mode settings
• Set the USA power mode
  • Turn the power indicator on or off
• Set up timers
• Set a system PIN code
• Adjust CFC settings
• Manage paired devices
• Manage a voice remote control

System

Name of Page	English
Time
1st Name	Long-Text 12
Input Type
Iber from page 14
Power Mode	Two-Mode
USB Power	Analog 3A
Power Modems	2A
Units
System PIN Code

Changing the On-Screen Menu Language

Your TV can display the on-screen menu in different languages.

To change the on-screen menu language;

Menu > System > Menu Language

Highlight your preferred language (English, Español, or Français) and press OK.

Menu Language

Dialin

Equidol

Power

Setting the Time

To ensure the correct time is displayed when you press the INFO button, set the TV's time zone:

Menu > System > Time > Time Zone

To turn Daylight Saving Time on or off:

1. Highlight Daylight Saving Time and press OK. The Daylight Saving Time menu is displayed.
2. Choose On if it is currently Daylight Savings Time, Off if it is Standard Time, or Auto to have the system automatically detect Daylight Savings Settings.

To change Time Format:

1. Highlight Time Format and use the Left/Right Navigation buttons to change between a 12 hour format or 24 hour format.

Changing the TV Name

Naming your TV helps differentiate it from other cast devices you may have in your home.

To edit your TV name:

Menu > System > TV Name > Enter a Name

TV Name am.pboxv17 32 a b c d e f g h i i k l m n x p q r i 1 u v w x y z 0 1 2 3 4 5 6 7 8 9 GPS 340 Spaces 38

Renaming Devices on the Input Menu

You can rename the inputs to make them easier to recognize on the input menu. For example, if you have a DVD player connected to the HDMI-1 input, you can rename that input to display "DVD Player."

See Changing the Input Source on page 7

To change the name of an input:

Menu > System > Input Name

To enter a custom name:

• Highlight the Name Input row and press OK.

• Enter your custom label using the on-screen keyboard and press OK.

TIP: The current input you are on will be the input name you are changing. You cannot change every input (i.e. WatchFree or SmartCast inputs).

To Hide an Input from the List:

Menu > System > Hide from Input List

- Highlight the input name you would like to hide. Hidden inputs will not be displayed in the input list.

- Use the Left/Right Navigation buttons to toggle from visible and hidden

Adjusting the Power Mode

Your TV is set to Eco Mode by default. When the TV is powered off, the Eco Mode setting uses less than 0.5W of power. Quick Start Mode enables your display to power on faster and also to turn on when powered from another device (such as when you are casting onto the TV).

WARNING: Please note that by changing this setting the energy consumptions required to operate this device will change.

To switch between Eco Mode and Quick Start Mode:

Menu > System > Power Mode

Highlight either Eco Mode or Quick Start Mode and press OK.

Using the USB Power Feature

The USB port can be used to charge devices.

The two options for this feature are

• Always On — Power is always available.
- Off When TV Off — Power is only available with the TV is on.

USB Power

2017.03.10

Turning the Power Indicator On or Off

The power indicator on the front of your TV normally does not glow when the TV is on. You can change this setting if you prefer the light to be on.

To turn the Power Indicator Light On or Off:

Menu > System > Power Indicator > Off/On

Setting the Auto Power Off Feature

To help save energy, your TV is set by default to turn off after 30 minutes without a video or audio signal. This feature can be deactivated.

To set the Auto Power Off feature:

Menu > System > Timers > Auto Power Off > Off

Setting Timers

When activated, the TV's timer will turn the TV off after a set period of time.

To setup a sleep timer:

Menu > System > Timers > Sleep Timer

Use the Left/Right Navigation buttons on the remote to highlight the period of time after which you want the TV to go to sleep: 30, 60, 90, 120, or 180 minutes. If you don't want the sleep: timer to activate, change the setting to Off

Timer
Start Timer	10"
Start Response Call	12:45:00:00
Block Number

Using the Blank Screen Feature

To help save LED life, your TV screen can turn on or off while audio is streaming.

To use the Blank Screen feature:

Menu > System > Timers > Blank Screen

To exit Blank Screen press any key (except the volume and mute keys).

Setting a System PIN Code

You can set a system pin to lock content and picture modes, as well as prevent accidental system resets. The first time you select System PIN code, you will need to create a PIN.

To create a PIN:

Menu > System > System PIN Code

Enter Your PIN > Save

System Pin Code

The following table is a simple formula:

3.42PM

to find

Adjusting the CEC Settings

The CEC function on your TV enables you to control devices connected to an HDMI input with the VIZIO TV remote, without any programming

Menu > System > CEC

Select a setting and then press OK.

- CEC — To use CFC, you must select Enable

• Device Discovery — To determine if your device is connected and supports CRC, select Device Discovery and then press OK.

CEC Audio Setup

Connect your audio device to the HDMI-1 (HDMI ARC) input on the TV. On your audio device, select the HDMI ARC input.

Using CEC, your VIZIO TV remote can control such features including (depending on specific device):

- Power On/Off

• Volume and mute

- Play and pause

Managing Mobile Devices

Your TV can be paired with a mobile device so you can easily control your TV across multiple devices.

To see a list of paired devices or unpair

a device:

Menu > System > Mobile Devices

Highlight a device name to delete it and press OK.

Mobile Devices

a1 = a2 + b_1 - 1

/ent Focus

[Unreadable]

WARNING: You will need to enter your current PIN code the next time you access this menu or if you'd like to change your PIN

WARNING: Not all HDMI devices support CEC. See your device's user manual for details.

USING THE ADMIN & PRIVACY MENU

You can use the TV's Admin & Privacy menu to restore the TV to its factory default settings as well as access other administrative settings.

Using the ADMIN & PRIVACY menu, you can:

• View system information

• Check for system updates
  • Force the system to power off and on
• Reset the IV to factory settings
• Enable or disable store demo
• Enable or disable viewing data
  • Personalize advertising choices
  • View the VIZIO Privacy Policy
• Start or stop the store demo mode

Admin & Privacy

System Information
Check for Operations
Self-Service Center
Build to Factory Solutions
Vesting Data	CF
Accessory
VIDEO Privacy Policy
Store Demo	CF

Viewing System Information

To view technical data and status information about your TV and network connection:

Menu > Admin & Privacy > System Information

Checking for System Updates

To check for a system update:

Menu > Admin & Privacy > Check for Updates

If an update is found, the TV will ask to confirm the update. If no update is found, the screen will note The TV is up-to-date.

Performing a Soft Power Cycle

A soft power cycle forces the TV to turn off then on again.

Menu > Admin & Privacy > Soft Power Cycle > OK

Restoring the TV to Factory Default Settings

All of the on-screen menu settings can be reset to the factory defaults.

WARNING: If you restore the TV to the factory default settings, all change you have made to the settings will be lost. This includes any wireless or picture settings.

To restore the TV to its factory default settings:

Menu > Admin & Privacy > Reset to Factory Settings

↓ If you set a system PIN code, enter it now.
2. The TV displays, "Select Reset to restore all TV settings to factory defaults."
3. Highlight Reset and press OK.
4. Wait for the TV to turn off. The TV will turn back on shortly afterward and the setup process will begin.

Store Demo

To set to Off, Demo 1, or Demo 2:

Menu > Admin & Privacy > Store Demo

Viewing Data

To turn viewing data on or off:

Menu > Admin & Privacy > Viewing Data

Use the Left/Right Navigation buttons to toggle from on or off

About Viewing Data

WHAT DATA DOES ACR TECHNOLOGY COLLECT?

When enabled, ACR technology will collect information about the audio and video programming content playing on this internet connected display unit including broadcast television, advertisements and other commercially available content. We associate this Viewing Data with the IP address for the unit, and a unique device number we assign. You may change your Viewing Data settings at any time within the Settings Menu of your TV. Declining Viewing Data collection will not change the functionality of your device.

WHO DO WE SHARE VIEWING DATA WITH?

When enabled, we share Viewing Data with authorized data partners. We license Viewing Data to analytics companies, media companies, advertisers, ad agencies, and other ad tech companies who measure ad effectiveness or aid personalization of ads. Our authorized cloud service providers may also store this data on and solely on our behalf, and for no other purposes.

WHAT DO WE DO WITH VIEWING DATA?

VIZIO or its authorized data partners may combine Viewing Data with household demographic data, or other data about your digital actions, like smartphone location, web histories or offline purchases, in order to determine the effectiveness of a particular ad, or choose which ads are likely to be useful or timely, including during broadcast, cable, satellite, or internet based television programming. VIZIO and its authorized data partners also use the information to generate summary analysis and reports of how users engage with content on their TVs and other devices.

WHAT ELSE DOES VIEWING DATA SHARING MEAN FOR YOU?

Viewing Data is also used to help content publishers, broadcasters or content distribution services create or recommend more relevant entertainment based on summary insights. For example, if devices sharing your IP address suggest an interest in music, fitness, or sports related topics, advertisers might deliver tailored ads to this display unit or other devices associated with your IP address.

You can easily turn this feature On or Off in the ADMIN & PRIVACY menu. If you have trouble enabling or disabling Viewing Data, please contact VIZIO Customer Support by going to support lvizio.com and selecting Contact Us.

For more information, see vizio.com/viewingdata and review VIZIO's privacy policy at vizio.com/privacy.

Managing Advertising Settings

Your advertising choices can be personalized.

Limited Ad Tracking

When enabled, TV Ad ID will not be passed or used for personalized ads on this device.

To turn on or off:

Menu > Admin & Privacy > Advertising > Limited Ad Tracking

• Use the Left/Right Navigation buttons to toggle from on or off

Reset TV Advertiser ID

An Identifier for Advertising — can be reset to a new identifier at any time.

To reset the TV Advertiser ID:

Menu > Admin & Privacy > Advertising > Reset TV Advertiser ID > OK

Ad Replacement

Replaces Standard Ads with Personalized Ads in Linear TV.

To turn Ad Replacement on or off:

Menu > Admin & Privacy > Advertising > Ad Replacement

• Use the Left/Right Navigation buttons to toggle from on or off

View VIZIO Privacy Policy

To view VIZIO Privacy Policy:

Menu > Admin & Privacy > VIZIO Privacy Policy > OK

USING THE INFO WINDOW

Press the INFO button to display:

• TV name
- Current input or for tuner: current channel
• Picture aspect
• Audio type
• Network name
• Time

Current Input or for tuner: current channel Picture Aspect Audio Type' Network Name TV Name Living Room HDMI-1 Normal HomeWiFi 5:00 PMStar Time

"When TV spodures and O' and O'by Alms content is passed through the TV to a sound bar or other audio device, the O'aby Africa icon 🖼 display with 'Audio Dot.'

SmartCast Home™

What is SmartCast Home?

SmartCast Home lets you discover, stream, and control your content like never before! Access top apps. Like Netflix, Hulu, and Amazon Prime Video, by using the remote to easily browse and launch content directly from the home screen. SmartCast Home makes finding something to watch easy and fun.

How to Launch SmartCast Home

Begin streaming with SmartCast Homeby:

- Press the SmartCast Home button on your remote.

- Select SmartCast from the list of inputs.

What you can do with SmartCast Home

• Stream high quality entertainment.

• Launch top tier apps directly from the home screen.
• Unlock your photos and videos by mirroring your laptop or mobile device onto your TV
• Rearrange apps on your home screen just the way you like it.
• Works with Google Assistant and other popular voice assistants.

Control your TV with the SmartCast Mobile™ App

Download the VIZIO SmartCast Mobile app and turn your smartphone into a remote to control and configure your TV.

Get it here, or visit www.vizio.com/smartcastapp on your device to download:

With SmartCast Mobile, you can:

• Power on/off devices, play/pause content, and modify advanced settings, all from the palm or your hand.
• Easily enter text only a your TV/display from your mobile device using a full keyboard.
• Browse and discover movies. TV shows, music, live streams, and more; across multiple apps at once.
• Access a quick look at show ratings, synops/s, cast, crew, clips, and other details.

Marquee Content Launch content with one click Discover New or popular content across multiple apps Search Find TV shows, movies and more Quick Access to Popular Apps Home Button Launch SmartCast Home with one click Streaming Apps on your TV

Visit www.nizia.com/smartcastags for minimum requirements.

WatchFree™

What is WatchFree?

VIZIO WatchFree taxes your cord-cutting entertainment experience one step further! With the simple press of a button, enjoy free streaming TV with over 100 live TV channels to choose from - news, movies, sports, comedy, music and more. A built-in on screen guide makes finding something to watch easier than over.

And it's all FREE — no fees, no subscriptions, or logins.

What you can do with WatchFree

- Stream over 100 live TV channels absolutely free - news, movies, sports, comedy, music and more.

• Navigate through channels, organized by genre, with an intuitive on-screen guide
• Watch 1000's of free movies from major studios.
• Watch the best of internet TV.
• No logins, subscriptions or transactions fees.

How to Launch WatchFree

To launch and begin watching entertainment offered on WatchFree:

- Press the WatchFree button

on your remote.

—Dr—

- Select WatchFree from the list of inputs.

Show Details

Find out show information

On-Screen Guide

Over 100 live TV and audio channels organized by genre

Zoneless "The New Dark Zone" 2018 • 2h • TV-G • Sci-Fi Outer space: The closest known resemblance to a perfect vacuum. It has essentially no friction, allowing countless stars, planets, and moons to move about freely. This is the story of one man's journey in this mysterious place. 3:30 PM 9:30 PM Entertainment 156 Music NEMC 107 Zoneless FAIRSTICS + 303 Zoneless Future Time RED 304 Network Security DALL 200 The City THE Area

WatchFree Button

OK Button

Press the OK button to return to the WatchFree on screen guide. Use the up/down Navigation buttons to scroll through the guide.

Note: Not available in Canada.

The USB Media Player allows you to connect a USB flash drive to your TV and play music, video, or photos.

Diagram showing a USB device connected to a series of circular components, enclosed in a red circle (no text or symbols)

Preparing Your USB Drive to Play USB Media

To display USB media, you must first save your videos onto a USB flash drive:

• The USB flash drive must be formatted as FAT32
- Files on the USB flash drive must end in a supported file extension (.mp3.jpg, etc).
- The player is not designed to play media from external hard drives. MP3 players, cameras, or smartphones.

Displaying USB Media

To display your USB media:

1. Connect your USB flash drive to the USB port on the side of the TV.
2. The TV will recognize the USB. Use the Navigation Keys on the remote to select the content you want to play.

-or-

1. Select USB from the bottom streaming icons on the SmartCast Home" page.

TIP: You can display your photos in Fullscreen. Select the photo, press OK, then highlight Fullscreen and press OK.

Removing the USB Drive from the TV

I o safely remove your USB flash drive from the TV:

1. Turn the TV off.
2. Disconnect your USB flash drive from the USB port on the side of the TV.

WARNING: Do not remove the USB drive while the TV is on. Doing so may damage the drive.

Note: The average rate of in-distribution margins only and may be subject to change. This actual number of ports and their locations may vary depending on the mode.

Playing USB Media: Music

Back Button Highlight this button and press OK to return to the previous screen. Connected Sources Displays connected USB devices. Current Folder Playback Control Toggle Music/Photos Sort by Album/Artist/Track View All or View Folders Toggle between viewing all content and only viewing folders. Vi2IO Music USB: MyFlashDrive My Music Browse Photos Sort: Artist A-Z View: Folders Now Playing Information Displays song title, album title, and other information. Progress Bar Displays the duration of the currently playing song. The bar will lengthen as the song progresses. MyHash Drive/Audio root My Music Name: 02 Summer Nights Title: Summer Nights Artist: DJ Sunset Album: Summer Duration: 00:321 Director: - Genre: Electro Year: 2020 Copyright: Protector: No File Size: 8.3M 1.50 mm Track Album Artist Duration Starry Summer Summer Cheese Z-42 Summer Nights DJ Sundahtower Manga Dream And BabhisRoh Mix Crystal Waters The Desi Beach Mix 4:21 Smooth Waves Eddy Mix To Serve 7:56 Page Information If your USB thumb drive has more files than can be displayed on a single screen, the page number is displayed here. Album Art If included on the USB thumb drive and associated with your music, the album art will display here. Folder Contents/Playlist This area displays the contents of the currently selected folder. You can browse among files using the Arrow and OK buttons on the remote.

Back Button Highlight this button and press OK to return to the previous screen. Connected Sources Displays connected USB devices. Current Folder My Videos Sort by Date or File Name View All or View Folders Toggle between viewing all content and only viewing folders. Play once or continuously VIZIO Video USB: MyTanhDrive MyFlash-Drive Video\Java\My Videos

File Date Duration

1 Family Vacation - California - 28th Birthday Party - Korea 2019 - Sunny's Graduation - Page Information If your USA thumb drive has more files than can be displayed on a single screen, the page number is displayed here. Folder Contents/Playlist This area displays the contents of the currently selected folder. You can browse among files using the Arrow and OK buttons on the remote. Page 1 of 1

Back Button Highlight this button and press OK to return to the previous screen. Back Button Highlight and press OK to return to left column. Current Folder Displays the folder path. VIZIO Photo VIZIO_265\Photo\Tool Connected Sources Displays connected USB devices. USB: My FlashDrive Current Folder root A.jpg B.jpg C.jpg Start Fullscreen Slideshow Start Slideshow Sort: Name A 7 View: Thunnails Settings Browse Music File Name: 101920x1080 Resolution: 920x1080 Size: 16072048 Page Information Displays the name, resolution, and the size of the selected photo. Folder Contents/Playlist This area displays the contents of the currently selected folder. You can browse among files using the Arrow and OK buttons on the remote. Photo information Displays the name, resolution, and the size of the selected photo. Page information If your USB thumb drive has more files than can be displayed on a single screen, the page number is displayed here.

Take a moment to register your product at

VIZIO.COM/PRODUCT-REGISTRATION

Customized Support

Get efficient, accurate assistance from the VIZIO Support team.

News and Offers

Stay up-to-date with product news and take advantage of exclusive offers.

Updates and Enhancements

Be first to know about important product updates, and alerts.

Do you have questions? Find answers at

SUPPORT.VIZIO.COM

The remote is not responding.

• Make sure the batteries are properly inserted matching the - and + symbols.
- Replace the batteries with fresh ones.

The TV displays "No Signal."

• Press INPUT button on the remote control to select a different input source.
• If you are using cable TV or antenna connected directly to the TV, scan for channels. See Scanning for TV Channels on page 16.

There is no power.

• Ensure the TV is plugged into a working electrical outlet.
• Ensure the power cable is securely attached to the TV.
• Press the Power/Standby button on the remote or on the back of the TV to turn the TV on.

The power is on, but there is no image on the screen.

• Ensure all cables are securely attached to the TV.
• Ensure all devices are connected correctly. Devices differ; see your device's user manual for details.
• Adjust Brightness, Contrast, or Backlight. See Adjusting the Picture Settings on page 8.
• Press the INPUT button on the remote to select a different input source.

The sound is flat or dialog is not audible.

- Turn off Volume Leveling. See Adjusting the Audio Settings on page 14.

Where do I find information on the accessibility features of this product and other VIZIO products?

• Please visit vizio.com/accessibility,
• Email us at: [e-mail], or
  • Give us a call at 1-877-698-4746.

How do I stream apps like Netflix to my VIZIO SmartCast® TV?

• Popular apps are located on the SmartCast Home \~ screen, so you can simply navigate to the app row on your SmartCast TV to start streaming.
• You can also use Apple AirPlay 2 or Chromecast built-in™ to stream content from your device directly to your SmartCast TV. For more information, please visit:

- VIZIO.com/Apple

- VIZIO.com/Google

The colors on the TV don't look right.

• Adjust the Color and Tint settings in the Picture menu. See Adjusting the Picture Settings on page 8.
• Select a pre-set picture mode. VIZIO recommends selecting Calibrated.
• Check all cables to ensure they are securely attached.

The image quality is not good.

• For the best image quality, view high-definition programs using digital sources. Connect your devices with HDMI cables.
• If you are using an antenna, the signal strength of the channel may be low. Ensure your antenna is connected securely to the TV and move the antenna around the room or close to a window for the best signal.

The picture is distorted.

• Move the TV away from electrical appliances, cars, and fluorescent lights.
• Ensure all cables are securely attached.

The TV image does not cover the entire screen.

- If you are using TV, AV, or Component with 450i input, go to Menu > Picture > Picture Aspect.

The TV has pixels (dots) that are always dark.

- Your HD TV is precision-manufactured using an extremely high level of technology. However, sometimes pixels may not display correctly. These types of occurrences are inherent to this type of product and do not constitute a defective product.

The buttons on the remote aren't working.

• Ensure you are only pressing one button at a time.
• Point the remote directly at the TV when pressing a button.
• Replace the remote batteries with new ones. See -Replacing the Batteries on page 5.

There is no sound.

• Press Volume Up on the remote control.
• Press the MUTE button on the remote to ensure mute is off.
• Check the audio settings. See Adjusting the Audio Settings on page 14
• Check the audio connections of external devices (Blu-ray player, game console, cable/satellite box) that are connected to the TV.
• If you are using an antenna, the signal strength of the channel may be low. Ensure your antenna is connected securely to the TV and move the antenna around the room or close to a window for the best signal.
• Set eARC to Off and use ARC mode.

I see "noise" or static on the screen.

• When your TV's digital capabilities exceed a digital broadcast signal, the signal is up-converted (improved) to match your TV's display capabilities. This up-converting can sometimes cause irregularities in the image.
• If you are using an antenna, the signal strength of the channel may be low. Ensure your antenna is connected securely to the TV and move the antenna around the room or close to a window for the best signal.

When I change input source, the TV image changes size.

• The TV remembers the viewing mode on each input source. If the viewing mode on the new input source differs from the one on the input source you switch from, the difference may be noticeable.
  • See Changing the Picture Aspect Ratio on page 9

How do I download the VIZIO SmartCast Mobile™ App?

• Make sure your phone or tablet is connected to a Wi-Fi network. Open a browser on your phone or tablet.
• Navigate to vizio.com/smartcastapp and follow the on-screen instructions to download the VIZIO SmartCast Mobile™ App.

How do I change the Inputs?

- Press the INPUT button on the back of the TV to cycle through the Inputs.

• Press the INPUT button on the basic remote to cycle through the inputs.
• Make sure the VIZIO SmartCast Mobile™ app is installed on your phone or tablet. Open the VIZIO SmartCast Mobile app. Tap on the Device list and select your TV. Tap on the Input key and select the Input of your choice.

How do I connect to my Wi-Fi network?

• On your TV remote, press the MENU button then go to Network > Select your Wi-Fi name > Enter password.
• Open the VIZIO SmartCast Mobile™ app on your phone or tablet. Tap on the Menu Tab > SmartCast Devices > Your TV/Device Name > Network
• Tap on the Settings icon > Network > Wireless Access Points. Select your Wi-Fi network from the list, enter the Wi-Fi password, and tap Connect.

How do I exit Demo Mode?

- Press and hold the INPUT button on the back of the TV to exit the demo mode

How do I watch Cable/Antenna TV channels?

• If you subscribe to cable or satellite, simply connect an HDMI cable (not included) to the receiver.
• If you use external antennas to watch local broadcast channels, use a coaxial cable to connect.

Some of my Channels are missing.

• Press the MENU button on your TV remote and select the channels option. Then select Find Channels.
• Open the VIZIO SmartCast Mobile app on your phone or tablet.
• Click on: Menu Tab > SmartCast Devices > Your TV/Device Name > Channels > Find Channels.

How do I disable/enable Viewing Data?

- Press the MENU button on your remote and select ADMIN & PRIVACY. Then select Viewing Data to turn the feature on or off.

The television will not turn on using Alexa or Google Assistant.

• Ensure the television is in Quick Start Mode.
• Tap on Menu > System > Power Mode > Quick Start.

How do I know I am getting 4K resolution or HDR content such as Dolby Vision?

• As you are watching content on the television, press the INFO button on the remote or VIZIO SmartCast Mobile app. You will see the current resolution being displayed along with the version of video.
  • HDR will show as a Dolby Vision icon, HDR10 or HLG.

BSpecific

M50Q7-H1 M50Q7-H61 M55Q7-H61 M55Q7-H61 M65Q7-H1 M65Q7-H61
Size 50' 50' 55' 55' 55' 55'Viewable Area 49.5' 49.5' 54.5' 54.5' 64.5' 64.5'
PRODUCT DIMENSIONS
Dimensions w/ Stand	44.08" x 27.98" x 10.04"(119.52 x 710.72 x 255 mm)	44.08" x 27.98" x 10.04"(119.52 x 710.72 x 255 mm)	48.59" x 30.60" x 10.04"(1234.2 x 777.2 x 255 mm)	48.59" x 30.60" x 10.04"(1234.2 x 777.2 x 255 mm)	57.28 x 35.65 x 11.81"(1455 x 905.5 x 300 mm)	57.28 x 35.65 x 11.81"(1455 x 905.5 x 300 mm)
Dimensions w/o Stand	44.08" x 25.58" x 2.84"(119.52 x 649.72 x 72.25 mm)	44.08" x 25.58" x 2.84"(119.52 x 649.72 x 72.25 mm)	48.59 in x 26.28 in x 2.85"(1234.2 mm x 718.4 mm x 72.3 mm)	48.59 in x 26.28 in x 2.85"(1234.2 mm x 718.4 mm x 72.3 mm)	57.28 x 33.09 x 2.54"(1455 x 840.5 x 72.25 mm)	57.28 x 33.09 x 2.54"(1455 x 840.5 x 72.25 mm)
Weight w/ Stand	28.09 lb (12.74 kg)	28.09 lb (12.74 kg)	36.38 lb (16.5 kg)	36.38 lb (16.5 kg)	54.23 lb (24.6 kg)	54.23 lb (24.6 kg)
Weight w/o Stand	27.62 lb (12.53 kg)	27.62 lb (12.53 kg)	35.94 lb (16.3 kg)	35.94 lb (16.3 kg)	53.35 lb (24.2 kg)	53.35 lb (24.2 kg)
Mounting Screw Size	M6	M6	M6	M6	M6	M6
Hole Pattern	200 mm x 200 mm	200 mm x 200 mm	300 mm x 200 mm	300 mm x 200 mm	400 mm x 200 mm	400 mm x 200 mm
PICTURE QUALITY
Maximum Resolution	3840 x 2160 (UHD)	3840 x 2160 (UHD)	3840 x 2160 (UHD)	3840 x 2160 (UHD)	3840 x 2160 (UHD)	3840 x 2160 (UHD)
LCD Backlight	Full Array LTD	Full Array LTD	Full Array LTD	Full Array LTD	Full Array LTD	Full Array LTD
Dynamic Motion Rate	120 120 120 120 120 120
Cinemawide® Black Bar Detection	Yes	Yes	Yes	Yes	Yes	Yes
INPUTS / OUTPUTS
HDMI Inputs	4	4	4	4	4	4
Composite Video Inputs	1	1	1	1	1	1
Ethernet Input	1	1	1	1	1	1
RF Antenna Input	1	1	1	1	1	1
USB	1	1	1	1	1	1
Audio Output	HDMI eARC, Analog Stereo Out,Digital Optical	HDMI eARC, Analog Stereo Out,Digital Optical	HDMI eARC, Analog Stereo Out,Digital Optical	HDMI eARC, Analog Stereo Out,Digital Optical	HDMI eARC, Analog Stereo Out,Digital Optical	HDMI eARC, Analog Stereo Out,Digital Optical
OTHER
Remote Control Type	IR Remote	IR Remote	IR Remote	IR Remote	IR Remote	IR Remote
Power Consumption	82.26W	82.26W	114.6W	114.6W	124.65W	124.65W
Standby Power	<0.5W	<0.5W	<0.5W	<0.5W	<0.5W	<0.5W
Voltage	120V	120V	120V	120V	120V	120V
OSD Language	English, French, Spanish	English, French, Spanish	English, French, Spanish	English, French, Spanish	English, French, Spanish	English, French, Spanish
Certification	UI, eUI, FCC Class B, BETS-7/ICFS-003 Class B, IC, HDMI (CEC, ARC)Dolby Audio, Dolby Vision	UI, eUI, FCC Class B, BETS-7/ICFS-003 Class B, IC, HDMI (CEC, ARC)Dolby Audio, Dolby Vision	UI, eUI, FCC Class B, BETS-7/ICFS-003 Class B, IC, HDMI (CEC, ARC)Dolby Audio, Dolby Vision	UI, eUI, FCC Class B, BETS-7/ICFS -003 Class B, IC, HDMI (CEC, ARC)Dolby Audio, Dolby Vision	UI, eUI, FCC Class B, BETS-7/ICFS-003 Class B, IC, HDMI (CEC, ARC)Dolby Audio, Dolby Vision	UI, eUI, FCC Class B, BETS-7/ICFS-003 Class B, IC, HDMI (CEC, ARC)Dol by Audio, Dolby Vision

CRegulat

FCC Class B Radio Interference Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Warning

Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void the user's authority to operate this equipment.

Notice

The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.

The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the user to correct such interference.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Operations in the 5GHz products are restricted to indoor usage only.

This equipment complies with FCC/ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Caution

Always use a power outlet that is properly grounded

Canada Notice for License-Exempt Radio Apparatus

This device complies with Industry Canada's license exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This device operates on a no-protection no-interference basis. Should the user seek to obtain protection from other radio services operating in the same TV bands, a radio license is required. Please consult Industry Canada's document CPC 2-1-28, Optional Licensing for Low Power Radio Apparatus in the TV Bands, for details.

Industry Canada Class II emission compliance statement

BY USING YOUR VIZIO PRODUCT YOU AGREE TO BE BOUND BY ALL THE TERMS OF THIS WARRANTY. BEFORE USING YOUR VIZIO PRODUCT, PLEASE READ THIS WARRANTY CAREFULLY. IF YOU DO NOT AGREE TO THE TERMS OF THIS WARRANTY, DO NOT USE THE VIZIO PRODUCT AND. WITHIN THIRTY (30) DAYS OF THE DATE OF PURCHASE, RETURN IT FOR A REFUND TO THE AUTHORIZED RETAILER WHERE YOU PURCHASED IT.

This warranty contains a binding arbitration agreement and a class action waiver for United States residents. If you live in the United States, the binding arbitration agreement and class action waiver affect your rights under this warranty. Please read the text under the section filled "Binding Arbitration Agreement; Class Action Waiver (U.S. Residents Only)" carefully.

How Long This Warranty Lasts

For non commercial use, VIZIO warrants the product on the terms set forth below for one (1) year from the date of original purchase. For commercial use, VIZIO warrants this product on the terms set forth below for ninety (90) days from the date of original purchase.

What This Warranty Covers

VIZIO warrants the product against defects in materials and workmanship when the product is used normally in accordance with VIZIO's user guides and manuals.

Except where restricted by law, this warranty applies only to the original purchaser of a new product. The purchase must have been made from an authorized retailer in the United States (including Puerto Rico) or Canada. The product must also be located in the country where it was purchased at the time of warranty service.

Zero Bright Pixel Defect Guarantee (Displays Only)

Your product may qualify for a warranty against "zero bright pixel" defects for the duration of the warranty on select new product purchases. To determine if this guarantee applies to your product, refer to the model's product information page at www.vizio.com, look for the "zero bright pixel" guarantee on the box, or contact VIZIO Technical Support at the email address or telephone number below.

How to Get Service

Before obtaining warranty service, you may visit www.vizio.com for additional help and troubleshooting. To obtain warranty service, contact VIZIO Customer Support by going to support.vizio.com and selecting Contact Us.

You can also call Customer Support:

US-[phone]

Canada — [phone]

Your Obligations Before Service

You must obtain pre-authorization before sending your product to a VIZIO service center. You may be required to supply a purchase receipt (or copy) to show that the product is within the warranty period. When you return a product to a VIZIO service center, you must ship the product in its original packaging or in packaging that affords an equal degree of protection. VIZIO Technical Support will provide instructions for packing and shipping the product to the VIZIO service center. ALL USER DATA AND DOWNLOADED APPLICATIONS STORED ON A PRODUCT WILL BE DELETED IN THE COURSE OF SOME IN-HOME AND ALL SHIP IN WARRANTY SERVICE. If this occurs, your product will be restored to its original state. You will be responsible for restoring all applicable user data and downloaded applications. Recovery and reinstallation of user data and downloaded applications is not covered under this warranty. In order to protect your personal information, VIZIO recommends that you always clear all personal information from the product before it is serviced, regardless of the servicer.

VIZIO's Responsibilities

IF VIZIO determines that a product is covered by this warranty, VIZIO will (at its option) repair or replace it, or refund the purchase price to you. There will be no charge for parts or labor during the warranty period. Replacement parts may be new or recertified at VIZIO's option and sole discretion. Replacement parts and VIZIO's labor are warranted for the remaining portion of the original warranty or for ninety (90) days from warranty service, whichever is longer.

Types of Service

1 Vis that are 32 inches or larger will usually be serviced in-home. In-home service requires complete and easy access to the product and does not include de-installation or re-installation of the product. In-home service is subject to availability. VIZIO will provide other service options when in-home service is not available. All other VIZIO products must be sent to a VIZIO service center to obtain warranty service. VIZIO is not responsible for transportation costs to the service center, but VIZIO will cover return shipping to the customer.

What This Warranty Does Not Cover

This warranty does not cover: (a) cosmetic damage; (b) normal wear and tear; (c) improper operation; (d) improper voltage supply or power surges; (e) signal issues; (f) damage from shipping; (g) acts of God; (h) customer misuse, modifications or adjustments; (i) installation, set-up, or repairs

attempted by anyone other than by a VIZIO authorized service center; (i) products with unreadable or removed serial numbers; (k) products requiring routine maintenance; or (l) products sold "AS IS", "CLEARANCE", "FACTORY RECERTIFIED", or by a non-authorized reseller.

What to Do If You Are Not Satisfied With Service

If you feel VIZIO has not met its obligations under this warranty, you may attempt to resolve the issue informally with VIZIO. If you are unable to resolve the issue informally and wish to rise a formal claim against VIZIO, and if you are a resident of the United States, you must submit your claim to binding arbitration according to the procedures described below, unless an exception applies. Submitting a claim to binding arbitration means that you do not have the right to have your claim heard by a judge or jury. Instead your claim will be heard by a neutral arbitrator.

Binding Arbitration Agreement: Class Action Waiver (U.S. Residents Only) UNLESS YOU HAVE BROUGHT AN ELIGIBLE CLAIM IN SMALL CLAIMS COURT OR HAVE OPTED OUT AS DESCRIBED BELOW, ANY CONTROVERSY OR CLAIM RELATING IN ANY WAY TO YOUR VIZIO PRODUCT, INCLUDING ANY CONTROVERSY OR CLAIM ARISING OUT OF OR RELATING TO THIS WARRANTY, A BREACH OF THIS WARRANTY, OR THE VIZIO PRODUCT'S SALE, CONDITION OR PERFORMANCE, WILL BE SETTLED BY BINDING ARBITRATION ADMINISTERED BY THE AMERICAN ARBITRATION ASSOCIATION AND CONDUCTED BY A SINGLE ARBITRATOR APPOINTED BY THE AMERICAN ARBITRATION ASSOCIATION, IN ACCORDANCE WITH ITS COMMERCIAL ARBITRATION RULES AND ITS SUPPLEMENTARY PROCEDURES FOR CONSUMER-RELATED DISPUTES. You may learn more about the American Arbitration Association and its rules for arbitration by visiting www.adr.org or by calling 800-78-78/9. Since this warranty concerns a transaction in interstate or international commerce, the Federal Arbitration Act will apply.

The filing fees to begin and carry out arbitration will be shared between you and VIZIO, but in no event will your fees ever exceed the amount allowable by the American Arbitration Association, at which point VIZIO will cover all additional administrative fees and expenses. VIZIO waives its right to recover attorneys fees in connection with any arbitration under this warranty. If you are the prevailing party in an arbitration to which the Supplementary Procedures for Consumer-Related Disputes applies, then you are entitled to recover attorneys' fees as the arbitration may determine.

The dispute will be governed by the laws of the state or territory in which you resided at the time of your purchase (if in the United States). The place of arbitration will be Irvine, California, or your county of residence (if in the

D

United States). The arbitrator will have no authority to award punitive or other damages not measured by the prevailing party's actual damages, except as may be required by statute. The arbitrator will not award consequential damages, and any award will be limited to monetary damages and will include no equitable relief, injunction, or direction to any party other than the direction to pay a monetary amount. Judgment on the award rendered by the arbitrator will be binding and final, except for any right of appeal provided by the Federal Arbitration Act, and may be entered in any court having jurisdiction. Except as may be required by law, neither you nor VIZIO nor an arbitrator may disclose the existence, content, or results of any arbitration under this warranty without the prior written consent of you and VIZIO. ANY DISPUTE, WHETHER IN ARBITRATION, IN COURT, OR OTHERWISE, WILL BE CONDUCTED SOLELY ON AN INDIVIDUAL BASIS. VIZIO AND YOU ACREET THAT NO PARTY WILL HAVE THE RIGHT OR AUTHORITY FOR ANY DISPUTE TO BE ARBITRATED AS A CLASS ACTION, A PRIVATE ATTORTNY GENERAL ACTION, OR IN ANY OTHER PROCEEDING IN WHICH EITHER PARTY ACTS OR PROPOSES TO ACT IN A REPRESENTATIVE CAPACITY. NO ARBITRATION OR PROCEEDING WILL BE JOINED, CONSOLIDATED, OR COMINED WITH ANOTHER ARBITRATION OR PROCEEDING WITHOUT THE PRIOR WRITTEN CONSENT OF ALL PARTIES TO ANY SUCH ARBITRATION OR PROCEEDING.

Exceptions to Binding Arbitration Agreement and Class Action Waiver

IF YOU DO NOT WISH TO BE BOUND BY THE BINDING ARBITRATION AGREEMENT AND CLASS ACTION WAIVER, THEN: (1) you must notify VIZIO in writing within sixty (60) days of the date that you purchased the product; (2) your written notification must be mailed to VIZIO at 39 Tesla, Irvine, CA 92618. Attn: Legal Department and (3) your written notification must include (a) your name, (b) your address, (c) the date you purchased the product, and (d) a clear statement that you wish to opt out of the binding arbitration agreement and class action waiver. In addition, you may pursue a claim in small claims court in your county of residence (if in the United States) or in Orange County, California. In such case the provisions of the section filled "Finding Arbitration Agreement: Class Action Waiver (U.S. Residents)" will not apply.

Exclusions and Limitations

TO THE GREATEST EXTENT PERMITTED BY APPLICABLE LAW, THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE DESCRIBED ABOVE. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WILL BE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE. SOME STATES AND PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN

IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. VIZIO WILL NOT BE RESPONSIBLE FOR LOSS OF USE. LOSS OF INFORMATION OR DATA, COMMERCIAL LOSS, LOST REVENUE OR LOST PROFITS, OR OTHER INDIRECT, SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES, EVEN IF VIZIO HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND EVEN IF THE REMEDY FAILS OF ITS ESSENTIAL PURPOSE, SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. IN LIFE OF ANY OTHER REMEDY FOR ANY AND ALL LOSSES AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER (INCLUDING VIZIO'S NEGLIGENCE, ALLEGED DAMAGE, OR DEFECTIVE GOODS, NO MATTER WHETHER SUCH DECEPTS ARE DISCOVERABLE ORLatENT). VIZIO MAY, AT ITS SOIL AND EXCLUSIVE OPTION AND IN ITS DISCRETION, RPAIR OR REPLACE YOUR PRODUCT, OR REFUND ITS PURCHASE PRICE, AS NOTED, SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

How the Law Applies

This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state and province to province. This warranty applies to the greatest extent permitted by applicable law.

General

No employee or agent of VIZIO may modify this warranty. If any term of this warranty, other than the class action waiver, is found to be unentorceable, that term will be severed from this warranty and all other terms will remain in effect. If the class action waiver is found to be unentorceable, then the entire section titled "Binding Arbitration Agreement: Class Action Waiver (U.S. Residents Only)" will not apply. This warranty applies to the maximum extent not prohibited by law.

Changes to Warranty

This warranty may change without notice, but any change will not affect your original warranty. Check www.vizio.com for the most current version.

Legal Information

E

Software Licenses

All software is provided subject to a software license agreement(s) and you agree that you will be bound by such license agreement(s) in addition to these terms. Your use of this product is subject to VIZIO's privacy policy, which may be updated from time to time, and is available to view at vizio.com/privacy.

Export Regulations

Customer acknowledges that the VIZ/IO products, which include technology and software, are subject to customs and export control laws in the United States ("US"). The products may also be subject to the customs and export control laws and regulations of the country in which the products are manufactured and/or received.

Internet Connectivity and App Availability

Network conditions, environmental and other factors may negatively affect connectivity and the resulting video quality. If any, the applications and content of the applications pictured herein or described in accompanying documentation may only be available in certain countries or languages, may require additional fees or subscription charges, and may be subject to future updates, modifications or discontinuation without notice. VIT/O has no control over third party applications or content and assumes no responsibility for the availability or interruption of such applications or content. Additional third party terms, conditions and restrictions apply.

© 2020 VIZIO, Inc. All Rights Reserved.

This User Manual may not be copied in whole or in part without the written permission of VIZIO, Inc. VIZIO, Inc. has made reasonable efforts to ensure the accuracy of the information provided herein. All product specifications functionality features, configurations, performance, design and other product information described herein are subject to change without notice. VIZIO, Inc. is not responsible for typographical, technical, or descriptive errors. To review the most updated version of this User Manual and the associated Quick Start Guide, go to vizio.com

VIZIO, the VIZIO logo, the V logo, and other terms and phrases are trademarks or registered trademarks of VIZIO, Inc.

The terms HDMI, HDMI High Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. DTS, the Symbol. DTS and the Symbol together, Virtual X, and the DTS Virtual X logo are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights Reserved.

For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. DTS, the Symbol, DTS and the Symbol together, DTS-HD, and the DTS-HD logo are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights Reserved.

Dolby, Dolby Vision, Dolby Audio, and the double D symbol are trademarks of Dolby Laboratories. Manufactured under license from Dolby Laboratories. Confidential unpublished works. Copyright © 1992-2019 Dolby Laboratories. All rights reserved.

Google Play logo, YouTube, and Chromecast built-in are trademarks of Google LLC.

Other names of companies, products, and services used in this User Manual may be trademarks, trade names or service marks of others and VIZIO, Inc. disclaims any interest in trademarks, trade names or service marks other than its own. Mention of non-VIZIO products is for informational purposes only.

App services featured on the included IR remote may vary and may not be available in all regions.

4K or HDR availability varies by app and may be subject to subscription fees, internet service, and device capabilities.

Battery Disposal

Caution: This product may be shipped with batteries. Do not dispose of batteries in a line or with ordinary household waste. Batteries may explode and can cause damage. Replace batteries only with the same or equivalent type of batteries recommended by WZIG. The

disposal of batteries may be regulated by your state. For more information on recycling or properly disposing of your batteries, please check with your state or go to vizio.com/environment.

Product Recycling

The disposal and recycling of consumer electronic products may be regulated by your state. Always properly dispose of your VIZIO products in accordance with local laws and regulations. VIZIO supports the proper recycling of our products. For information on how to properly recycle your VIZIO products and to learn more about consumer electronics recycling laws, please go to vizio.com/environment or call (S00) 374-3473.

Packaging Disposal

WIZIO encourages the recycling of the packaging used for this product. Please break down all boxes and recycle eligible materials according to local laws and regulations. For more information please go to vizio.com/environment or call [phone]

Accessibility

For information on the accessibility features of this product and other VIZIO products please visit:

Website:vizio.com/accessibility

Email: [e-mail]

Phone: [phone]

© 2020 VIZIO INC. All rights reserved. 201214SL