VK8920NHAQY - Vacuum Cleaner LG - Free user manual and instructions

Product Type	Cyclone Canister Vacuum Cleaner
Model	VK8920NHAQY
Brand	LG
Power Supply	220-240 V, 50/60 Hz
Power Consumption	~2000 W (estimated typical)
Dust Tank Capacity	Approx. 1.5 L (estimated from typical)
Cord Length	Approx. 6 m (typical)
Weight	Approx. 5 kg
Dimensions (L x W x H)	Approx. 400 x 250 x 300 mm
Filtration System	Air filter, Motor safety filter, Exhaust filter (washable)
Floor Nozzle	Carpet and hard floor adjustable with pedal
Accessories Included	Upholstery nozzle, Dusting brush, Crevice tool, Sani Punch nozzle
Noise Level	~75 dB (typical)
Safety Features	Thermal protector, auto shut-off on overheating
Cord Rewind	Automatic with foot pedal
Maintenance	Clean dust tank at MAX line; wash filters monthly; dry filters completely
Spare Parts	Filters, nozzles, hose (contact LG service agent)
Warranty	Contact LG service for details

Frequently Asked Questions - VK8920NHAQY LG

What safety precautions should I take before using the vacuum cleaner?

Read all safety instructions. Ensure the control knob is OFF before plugging in. Keep children away from the cord during rewinding. Do not vacuum burning objects or flammable liquids.

How do I assemble the vacuum cleaner?

Insert the nozzle into the telescopic pipe, then connect the pipe to the flexible hose. Push the hose fitting pipe into the attachment point on the vacuum cleaner until it clicks.

How do I adjust the floor nozzle for different surfaces?

Press the pedal on the nozzle: lower the brush for carpets (push the down arrow) and raise the brush for hard floors (push the up arrow).

How do I empty and clean the dust tank?

Turn off and unplug. Press the tank separation lever, pull out the tank, empty at the MAX line. Wash the tank with water if needed, and fully dry before reassembling.

How often should I clean the filters?

Clean the air filter and motor safety filter at least once a month. Wash with running water (not hot), dry in shade for a day. Clean the exhaust filter yearly without water.

What should I do if the vacuum cleaner suddenly stops working?

It may be due to overheating. Turn off and unplug. Check for full dust tank, blockages in hose or filters. Wait 30 minutes, then plug in and turn on. If it still doesn't run, contact LG service.

Can I use the vacuum cleaner to pick up water?

No. This vacuum cleaner is designed for dry use only. Do not vacuum liquids or wet materials, as it may cause electrical shock or damage.

How do I use the Sani Punch nozzle for bed cleaning?

Attach the nozzle to the telescopic tube. Set suction power to MAX. Lay the blanket on the bed and push the nozzle in the direction of the arrow. For light blankets, place on top of a bulky blanket. Do not disassemble the nozzle body.

How do I move the vacuum cleaner safely?

Always grasp the carrier handle on the body, not the dust tank handle, to prevent the tank from detaching. The tank handle is only for emptying.

Where should I store the vacuum cleaner?

Store indoors in a dry place. After use, keep the cord neatly wound and place the vacuum cleaner in an upright position to prevent tripping.

USER MANUAL VK8920NHAQY LG

This information contains important instructions for the safe use and maintenance of the vacuum cleaner. Especially, please read all of the information on page 4, 5, 6 for your safety. Please keep this manual in an easily accessible place and refer to it anytime.

YENI TIP CYCLONE ELEKTRIKLI SÜPÜRGE

Important safety instructions 4\~6

Assembling vacuum cleaner 10

Operating vacuum cleaner 12

Using carpet and floor nozzle / Hard floor nozzle 13

Cleaning dust tank 21

Cleaning air filter and motor safety filter 22

How to assemble dust separator 23

Cleaning exhaust filter 24

What to do if your vacuum cleaner does not work 25

What to do when suction performance decreases 25

IMPORTANT SAFETY INSTRUCTIONS

Read and follow all instructions before using your vacuum cleaner to prevent the risk of fire, electric shock, personal injury, or damage when using the vacuum cleaner. This guide do not cover all possible conditions that may occur. Always contact your service agent or manufacturer about problems that you do not understand. This appliance complies with the following EC Directives :-2006/95/EC Low Voltage Directive -2004/108/EC EMC Directive.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “WARNING” or “CAUTION.” These words mean:

WARNING

This symbol will alert you to hazards or unsafe practices which could cause serious bodily harm or death.

CAUTION

This symbol will alert you to hazards or unsafe practices which could cause bodily injury or property damage.

WARNING

1. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
2. Children should be supervised to ensure that they do not play with the appliance.
3. If the supply cord is damaged, it must be replaced by LG Electronics Service Agent in order to avoid a hazard
4. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

WARNING

• Do not plug in if control knob is not in OFF position. Personal injury or product damage could result.
• Keep children away and beware of obstructions when rewinding the cord to prevent personal injury The cord moves rapidly when rewinding.
• Disconnect electrical supply before servicing or cleaning the unit or when cleaner is not in use. Failure to do so could result in electrical shock or personal injury.
• Do not use vacuum cleaner to pick up anything that is burning or smoking such as cigarettes, or hot ashes. Doing so could result in death, fire or electrical shock.
• Do not vacuum flammable or explosive substances such as gasoline, benzene, thinners, propane (liquids or gases).

The fumes from these substances can create a fire hazard or explosion. Doing so could result in death or personal injury.

• Do not handle plug or vacuum cleaner with wet hands. Doing so could result in death or electrical shock.
• Do not unplug by pulling on cord. Doing so could result in product damage or electrical shock. To unplug, grasp the plug, not the cord.
• Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts.

Failure to do so could result in electrical shock or personal injury.

- Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run vacuum cleaner over cord. Keep cord away from heated surfaces.

Failure to do so could result in electrical shock or personal injury or fire or product damage.

• The hose contains electrical wires. Do not use it if it is damaged, cut punctured. Failure to do so could result in death, or electrical shock.
• Do not allow to be used as toy. Close attention is necessary when used by or near children.

Personal injury or product damage could result.

• Do not use the vacuum cleaner if the power cord or plug is damaged or faulty.
  Personal injury or product damage could result. In these cases, contact LG Electronics Service Agent to avoid hazard.
• Do not use vacuum cleaner if it has been under water. Personal injury or product damage could result. In these cases, contact LG Electronics Service Agent to avoid hazard.
• Do not continue to vacuum if any parts appear missing or damaged.

Personal injury or product damage could result. In these cases, contact LG Electronics Service Agent to avoid hazard.

- Do not use an extension cord with this vacuum cleaner.

Fire hazard or product damage could result.

• Using proper voltage.

Using improper voltage may result in damage to the motor and possible injury to the user. Proper voltage is listed on the bottom of vacuum cleaner.

- Turn off all controls before unplugging.

Failure to do so could result in electrical shock or personal injury.

- Do not change the plug in any way.

Failure to do so could result in electrical shock or personal injury or product damage. Doing so result in death. If plug does not fit, contact a qualified electrician to install the proper outlet.

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

• Repairs to electrical appliances may only be performed by qualified service engineers.

Improper repairs may lead to serious hazards for the user.

- Do not put fingers near the gear.

Failure to do so could result in personal injury.

IMPORTANT SAFETY INSTRUCTIONS

CAUTION

• Do not put any objects into openings.
  Failure to do so could result in product damage.
• Do not use with any opening blocked: keep free of dust, lint, hair, and anything that may reduce air flow. Failure to do so could result in product damage.
• Do not use vacuum cleaner without the dust tank and/or filters in place.
  Failure to do so could result in product damage.
  • Always clean the dust bin after vacuuming carpet cleaners or fresheners, powders and fine dust.
  These products clog the filters, reduce airflow and can cause damage to the cleaner. Failure to clean the dust bin could cause permanent damage to the cleaner.
• Do not use vacuum cleaner to pick up sharp hard objects, small toys, pins, paper clips, etc.
  They may damage the cleaner or dust bin.
• Store the vacuum cleaner indoors.
  Put the vacuum cleaner away after use to prevent tripping over it.
• The vacuum cleaner is not intended to use by young children or infirm people without supervision.
  Failure to do so could result in personal injury or product damage.
• Only use parts produced or recommended by LG Electronics Service Agents.
  Failure to do so could result in product damage.
• Use only as described in this manual. Use only with LG recommended or approved attachments and accessories.
  Failure to do so could result in personal injury or product damage.

• To avoid personal injury and to prevent the machine from falling when cleaning stairs, always place it at the bottom of stairs.
  Failure to do so could result in personal injury or product damage.

• Use accessory nozzles in sofa mode.
  Failure to do so could result in product damage.
  You should grasp the carrier handle when you are moving the vacuum cleaner. (Page 20)

• Make sure the filters (exhaust filter and air filter) are completely dry before replacing in the machine.
  Failure to do so could result in product damage.
• Do not dry the filter in an oven or microwave.
  Failure to do so could result in fire hazard.
• Do not dry the filter in a clothes dryer.
  Failure to do so could result in fire hazard.
• Do not dry near an open flame.
  Failure to do so could result in fire hazard.
• Do not use filters that is not dried.
• If the power cord is damaged, it must be replaced by an approved LG Electronics Service Agent to avoid a hazard.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
  Children should be supervised to ensure that they do not play with the appliance.

Thermal protector :

This vacuum cleaner has a special thermostat that protects the vacuum cleaner in case of motor overheating. If the vacuum cleaner suddenly shuts off, turn off the switch and unplug the vacuum cleaner. Check the vacuum cleaner for possible source of overheating such as a full dust tank, a blocked hose or clogged filter. If these conditions are found, fix them and wait at least 30 minutes before attempting to use the vacuum cleaner. After the 30 minute period, plug the vacuum cleaner back in and turn on the switch. If the vacuum cleaner still does not run, contact a qualified electrician.

How to save Energy

For power saving, please turn the switch off on the body.

Push the nozzle into the telescopic pipe.

Push the fitting pipe on the flexible hose into the attachment point on the vacuum cleaner.

To remove the flexible hose from the vacuum cleaner, press the button situated on the fitting pipe, then pull the fitting pipe out of the vacuum cleaner.

How to use Operating vacuum cleaner

③ Park mode Park modu

• To store during vacuuming, for example to move a small piece of furniture or a rug, use park mode to support the flexible hose and nozzle.
- Slide the hook on the nozzle into the slot on the side of vacuum cleaner.

This is equipped with a pedal which allows you to alter its position according to the type of floor to be cleaned.

- Carpet or rug position

Press the pedal ( ) to lower brush.

- Hard floor position (tiles, parquets floor) Press the pedal (u) to lift the brush up.

- Cleaning carpet and floor nozzle

- Clean the hole and brush of nozzle.

• Efficient cleaning of hard floors (wood, linoleum, etc)

Upholstery nozzle is for vacuuming upholstery, mattresses, etc.

Dusting brush is for vacuuming picture frames, furniture frames, books and other irregular surfaces.

Pull the cover Kolu çekin

Crevice tool is for vacuuming in those normally hard-to-reach places such as reaching cobwebs or between the cushions of a sofa.

- Accessory nozzles include in the "PE BAG" with owner's manual.

Be cautious to use the product on TV, LCD, Monitor or furniture, it can cause small scratch.

This nozzle picks up even dust inside through beating.

The bottom part can be separated to be cleaned.

Since the bottom does not stick to the surface, vacuuming is easy.

Özellikler

Follow the directions below for proper use.

Kullanım

Connect the nozzle to the telescopic tube.

Kurulum

Set the suction power control switch to MAX POWER before vacuuming.

Depending on the type of bedding, handling may be awkward or it may cause a lot of noise.

If this is the case, adjust the suction power control switch to a lower setting.

This sani punch nozzle is for effective cleaning of beds and blankets to remove mites and dust.

Light blanket & sheet

Pike ve çarşaf

Lay out the blanket and vacuum it on the bed.

It is easier to clean a light blanket or sheet by pushing the nozzle in the direction of the arrow.

To increase cleaning efficiency for light blankets, lay on top of a bulky blanket and then clean.

For simple cleaning of the vacuum nozzle, detach the Sani Punch nozzle from the telescopic tube and attach the crevice tool to vacuum dust.

Bottom Alt

Since the vibrator inside is composed of precision parts, never disassemble the body.

Be careful not to let foreign objects clog the air suction part on top of the vacuum nozzle.

Since removal of the punch bar may cause performance problems, do not warp or remove it.

Attach the bottom plate properly before using. Without this bottom plate, it may not function.

Since this vacuum nozzle has been made exclusively for cleaning beds, blankets and upholstery, use it only for these cleaning purposes.

(Using it to clean the floor may result soiling it or a drop in performance, do not use it for such purposes.)

Follow the instruction below for through washing.

(Do not soak the entire body of the vacuum nozzle in water, it may cause the vibrator to malfunction)

How to use Emptying dust tank

The dust tank needs emptying when the dust tank level reaches the MAX line.

• Turn off the vacuum cleaner and unplug it.
• Grasp the handle of the tank and then press the tank separation lever.
• Pull out the dust tank.
• Empty the tank and then assemble the dust tank as below.

Moving the vacuum cleaner

• Don't grasp the tank handle when you are moving the vacuum cleaner.
  The vacuum cleaner's body may fall when separating tank and body.
  You should grasp the carrier handle when you are moving the vacuum cleaner.

How to use Cleaning dust tank

If suction power decreases after cleaning the dust tank, clean the air filter and the motor safety filter.

→ Next page

DİKKAT

How to use Cleaning air filter and motor safety filter

• Push the vacuum cover button, open the body cover.
• Hold dust separator handle and pull it upward.
• Open the guide cover by pulling the guide cover lever.
• Pull out the air filter and motor safety filter.
• Clean air filter and motor safety filter with running water.
• Do not wash filters with hot water.
• Eliminate water thoroughly
• Dry it under well-ventilated shade for a day.

NOTICE

If filters are damaged, do not use them. In this cases, contact LG Electronics Service Agent. Wash filters at least Once a month.

Assembling will be conducted in opposite order of separation.

Use the vacuum after assembling the dust separator fully.

DIKKAT

• Insert the air filter and motor safety filter.
• Close the guide filter cover
• Hold the dust separator handle and put it down to connect it clearly.
• Close the vacuum cover.

CAUTION

• If there is no dust separator or dust separator is not installed clearly, cover will not be closed.
• If it is not installed clearly, pull the dust separator out and re-assemble it.
• Do not operate the vacuum cleaner
  when the body cover is not close.
• It can be the cause of malfunction.

How to use Cleaning exhaust filter

• The exhaust filter is reusable.
- To clean the exhaust filter, remove the exhaust filter cover on the body by pulling it out.
- Separate the exhaust filter.
• Dust off filter.(Do not wash filter with water.)
• The exhaust filter should be cleaned at least a year.

Exhaust filter cover assembling

Check that the vacuum cleaner is plugged in correctly and that the electrical socket is working.

Disposal of your old appliance

1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product.
5. Comply with the EEE Directive.

LG Electronics Inc. LG Twin Towers 20,

Yeouido-dong, Yeongdeungpo-gu,

Seoul, Korea 150-721

TEL:[phone]