P137-GHV-V2-K - Network adapter Tripp Lite - Free user manual and instructions

Brand	Tripp Lite
Model	P137-GHV-V2-K
Product Type	Network Adapter (USB to Ethernet)
Host Interface	USB
Ethernet Port	RJ-45
Maximum Data Rate	10/100/1000 Mbps (Gigabit)
Network Standards	IEEE 802.3, 802.3u, 802.3ab
Energy Efficient Ethernet	IEEE 802.3az compliant
Flow Control	Full-duplex (802.3x) and half-duplex (back-pressure)
Checksum Offload	IPv4/IPv6 COE to reduce CPU load
Power Source	Bus-powered via USB
Wake-on-LAN	Supported (Magic Packet, link-change, wakeup frame)
Suspend Mode	Supported with remote wakeup
System Requirements	Available USB port; Windows, Mac, Linux
Package Contents	USB Ethernet Adapter, Quick Start Guide
Warranty	3-Year Limited Warranty
Compliance	FCC Class B, WEEE

Frequently Asked Questions - P137-GHV-V2-K Tripp Lite

How do I install the P137-GHV-V2-K network adapter?

Plug the USB connector into an available USB port on your computer. The device will auto-install. You may need to restart your computer. Then connect an Ethernet cable from the adapter to your LAN port.

Which operating systems are compatible with this adapter?

The adapter is compatible with Windows, Mac, and Linux operating systems.

What network speeds does the adapter support?

It supports 10/100/1000 Mbps (Gigabit Ethernet) speeds, compliant with IEEE 802.3, 802.3u, and 802.3ab standards.

Does the adapter support Wake-on-LAN?

Yes, it supports Wake-on-LAN via Magic Packet, link-change, and Microsoft Wakeup Frame.

Is the adapter power supplied through USB?

Yes, the adapter is bus-powered via the USB port, so no external power supply is needed.

What is the warranty period for this product?

Tripp Lite provides a 3-year limited warranty against defects in materials and workmanship.

Does the adapter support Energy Efficient Ethernet?

Yes, it is IEEE 802.3az compliant, reducing power consumption during low data activity.

Can I use this adapter with a USB 2.0 port?

Yes, the adapter is backward compatible with USB 2.0 ports, but maximum speed may be limited to 480 Mbps.

What cables are required to connect the adapter?

Use a Cat5e or Cat6 Ethernet cable to connect the adapter's RJ-45 port to your network.

How do I register my product for warranty?

Visit www.tripplite.com/warranty to register your product. Registration may enter you for a chance to win a free Tripp Lite product.

USER MANUAL P137-GHV-V2-K Tripp Lite

USB 2.0 10/100/1000 Gigabit Ethernet Adapter

Model: U236-000-GBW (White)

USB 3.0 10/100/1000 Gigabit Ethernet Adapter

Models: U336-000-GBW (White) and U336-000-R (Black)

Register your product for quicker service and ultimate peace of mind. You could also win an ISOBAR6ULTRA surge protector—a \$100 value!

www.tripplite.com/warranty

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

Copyright © 2017 Tripp Lite. All rights reserved.

Product Features

• U236-000-R ensures true 10/100 Mbps network speeds
• U236-000-GBW supports Gigabit networks at speeds up to 480 Mbps
- U336-000-R and U336-000-GBW ensure true 10/100/1000 Mbps network speeds
- Compliant with IEEE 802.3, 802.3u, and 802.3ab standards
- IEEE 802.3az (Energy Efficient Ethernet) compliant
- Supports full-duplex with IEEE 802.3x flow control and half-duplex with back-pressure flow control
- Supports IPv4 and IPv6 pack Checksum Offload Engine (COE) to reduce CPU loading
- Suspend mode and remote wakeup supported via link-change, Magic Packet, Microsoft® Wakeup Frame and external wakeup pin
• Supports Wake-on-LAN

System Requirements

• An available USB port
• Compatible with Windows®, Mac® and Linux®

Package Contents

• USB Ethernet Adapter
• Quick Start Guide

Installation

1. Plug the USB connector on the adapter into an available USB port on your computer. Upon connecting the adapter to your computer, the device will begin installing.
2. Wait for the installation process to reach completion. You may need to restart your computer.
3. Connect the Ethernet port on the adapter to your LAN port using a Cat5e/6 cable.

Warranty and Product Registration

3-Year Limited Warranty

TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of three (3) years from the date of initial purchase. TRIPP LITE's obligation under this warranty is limited to repairing or replacing (at its sole option) any such defective products. To obtain service under this warranty, you must obtain a Returned Material Authorization (RMA) number from TRIPP LITE or an authorized TRIPP LITE service center. Products must be returned to TRIPP LITE or an authorized TRIPP LITE service center with transportation charges prepaid and must be accompanied by a brief description of the problem encountered and proof of date and place of purchase. This warranty does not apply to equipment, which has been damaged by accident, negligence or misapplication or has been altered or modified in any way.

EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the purchaser.

EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, TRIPP LITE is not liable for any costs, such as lost profits or revenue, loss of equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes, claims by third parties, or otherwise.

Warranty and Product Registration

PRODUCT REGISTRATION

Visit www.triplite.com/warranty today to register your new Tripp Lite product. You'll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

FCC Notice, Class B

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications to this equipment not expressly approved by Tripp Lite could void the user's authority to operate this equipment.

Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support equipment or to significantly affect its safety or effectiveness is not recommended.

WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union)

Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations, when customers buy new electrical and electronic equipment from Tripp Lite they are entitled to:

• Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on the country)
• Send the new equipment back for recycling when this ultimately becomes waste

Tripp Lite has a policy of continuous improvement. Product specifications are subject to change without notice.

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

17-11-342 93-330C_RevB