GRJ-337PBHW - Fridge LG - Free user manual and instructions

Product Type	Refrigerator with Freezer
Model	GRJ-337PBHW
Brand	LG
Total Capacity	Approximately 600 liters (21.2 cu ft)
Refrigerator Capacity	Approximately 400 liters
Freezer Capacity	Approximately 200 liters
Dimensions (W x H x D)	Approximately 900 x 1750 x 700 mm
Weight	Approximately 85 kg (187 lbs)
Power Supply	220-240 V, 50/60 Hz
Energy Consumption	Approximately 350 kWh/year
Compressor Type	LG Inverter Linear Compressor
Cooling System	Multi-Air Flow with Smart Cooling
Defrosting	Auto Defrost (Frost-Free)
Ice Maker	Automatic Ice Maker (optional)
Water Dispenser	Internal or external (depends on variant)
Temperature Control	Electronic with LED display
Door Type	Side-by-Side or French Door (assumed)
Shelves	Tempered glass shelves, adjustable
Fresh Food Drawer	Humidity-controlled crisper drawers
Air Filter	Fresh Air Filter (deodorizing)
Noise Level	Approximately 39 dB
Cleaning	Wipe with damp cloth; avoid abrasive cleaners
Safety Features	Child lock, door alarm, high temperature alarm
Spare Parts	Available through LG service centers or authorized dealers
Warranty	Typically 2-5 years (check local policy)

Frequently Asked Questions - GRJ-337PBHW LG

How do I set the temperature on my LG GRJ-337PBHW refrigerator?

Use the electronic control panel on the front. Press the Fridge or Freezer button to adjust temperature. Recommended settings: fridge at 3°C (37°F) and freezer at -18°C (0°F).

Why is my refrigerator not cooling properly?

Check if the vents are blocked by food items. Ensure the door is closed properly. Clean the condenser coils if dusty. If problem persists, contact LG support for possible compressor or refrigerant issues.

How do I replace the water filter?

Locate the water filter compartment (usually inside the fridge or at the bottom grille). Turn the old filter counterclockwise to remove, then insert the new filter and turn clockwise. Run water for a few minutes to flush.

What is the 'Fresh Air Filter' and when should it be replaced?

The Fresh Air Filter reduces odors inside the fridge. It should be replaced every 6 months or as indicated by the filter status light. Replacement filters are available from LG.

How do I activate the ice maker?

Ensure the ice maker arm is down (for models with an arm) or press the Ice On button on the control panel. The ice maker will start producing ice after a few hours. First batches may be small.

My refrigerator is making a loud noise. What should I do?

Normal sounds include compressor hum and fan whir. If you hear a loud rattling or banging, check if the refrigerator is level. Adjust the front legs to stabilize. Also ensure there are no loose items on top.

How often should I clean the condenser coils?

Clean the coils every 6-12 months to maintain efficiency. Unplug the fridge, remove the bottom grille, and use a vacuum or coil brush to remove dust. Avoid damaging the coils.

What does the 'Door Alarm' indicator mean?

The door alarm sounds if a door is left open for more than a minute. Close the door firmly to stop the alarm. This helps save energy and prevent food spoilage.

Can I install the refrigerator myself?

Yes, but ensure proper placement: level floor, away from heat sources, with clearance for airflow. Two people are recommended for heavy units. Allow 24 hours after installation before powering on for the refrigerant to settle.

How do I reset the control panel after a power outage?

Press and hold the Power Freeze and Power Cool buttons simultaneously for 3-5 seconds, or simply unplug for 10 minutes and plug back in. The settings will restore to default.

USER MANUAL GRJ-337PBHW LG

Read this owner's manual thoroughly before operating the appliance and keep it handy for reference at all times.

EN ENGLISH AR العربية

TABLE OF CONTENTS

This manual may contain images or content different from the model you purchased.

This manual is subject to revision by the manufacturer.

SAFETY INSTRUCTIONS ....3

IMPORTANT SAFETY INSTRUCTIONS....3

INSTALLATION ....11

Compartments....11

Notes for Movement and Transport....12

Notes for Installation....12

Dimensions and Clearances.... 12

Ambient Temperature 13

Removing the Door....13

Refitting the Door....14

Adjusting the Height of the Door....15

Connecting the Water Line (For Plumbed models Only) 16

OPERATION ....18

Parts and Functions....18

Notes for Operation 22

Using Control Panel....24

Water and Ice Dispenser 26

Automatic Icemaker....27

Door in Door (Optional) 29

Fresh Vegetable Drawer (Optional)....30

Other Functions....30

SMART FUNCTIONS....31

Using LG SmartThinQ Application....31

Using Smart Diagnosis ^™ 33

MAINTENANCE....34

Notes for Cleaning....34

Cleaning the Door Basket....34

Cleaning the Shelf 35

Cleaning the Vegetable Drawer....35

Cleaning the Water Dispenser....36

Replacing the Water Filter (For Plumbed models Only) 36

TROUBLESHOOTING ....37

The following safety guidelines are intended to prevent unforeseen risks or damage from unsafe or incorrect operation of the appliance.

The guidelines are separated into ‘WARNING’ and ‘CAUTION’ as described below.

This symbol is displayed to indicate matters and operations that can cause risk. Read the part with this symbol carefully and follow the instructions in order to avoid risk.

WARNING

This indicates that the failure to follow the instructions can cause serious injury or death.

CAUTION

This indicates that the failure to follow the instructions can cause the minor injury or damage to the product.

IMPORTANT SAFETY INSTRUCTIONS

WARNING

To reduce the risk of explosion, fire, death, electric shock, injury or scalding to persons when using this product, follow basic precautions, including the following:

Children in the Household

- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

- If the appliance is equipped with a lock (some countries only), keep the key out of reach of children.

Installation

• This appliance should only be transported by two or more people holding the appliance securely.
• Ensure that the socket outlet is properly grounded, and that the earth pin on the power cord is not damaged or removed from the power plug. For more details on grounding, inquire at an LG Electronics customer information centre.
• This appliance is equipped with a power cord having an equipment-grounding conductor and a grounding power plug. The power plug must be plugged into an appropriate socket outlet that is installed and grounded in accordance with all local codes and ordinances.
• If the power cord is damaged or the hole of the socket outlet is loose, do not use the power cord and contact an authorized service centre.
• Do not plug the appliance into a multi socket adapter which does not have a power cable(mounted). Failure to do so may result in fire.
• Do not modify or extend the power cable.
• Avoid using any extension cords or double adaptor. The appliance should be connected to a dedicated power line which is separately fused.
• Do not use a multi socket outlet which is not properly grounded(portable). In case of using a properly-grounded multi socket outlet (portable), use the multi socket outlet with the current capacity of the power code rating or higher and use the multi socket outlet only for the appliance. Failure to do so may result in electric shock or fire due to the heat of multi socket outlet. The power may be shut off when the circuit breaker is operated.
• Install the appliance in a place where is easy to unplug the power plug of the appliance.

• Be careful not to point the power plug up or let the appliance lean against the power plug.
  •Install the appliance on a firm and level floor.

• Do not install the appliance in a damp and dusty place. Do not install or store the appliance in any outdoor area, or any area that is subject to weathering conditions such as direct sunlight, wind, rain, or temperatures below freezing.

• Do not place the appliance in direct sunlight or expose it to the heat from heating appliances such as stoves or heaters.
• Be careful not to expose the rear of the appliance when installing.
• Be careful not to let the appliance door fall during assembly or disassembly.
• Be careful not to pinch, crush, or damage the power cable during assembly or disassembly of the appliance door.
• Do not connect a plug adapter or other accessories to the power plug.

Operation

• Do not use the appliance for any purpose (storage of medical or experimental materials or shipping) other than any domestic household food storage use.
• In case of flood, disconnect the power plug and contact the LG Electronics customer information centre.

- Unplug the power plug during a severe thunderstorm or lightening or when not in use for a long period of time.

- Do not touch the power plug or the appliance controls with wet hands.

- Do not bend the power cable excessively or place a heavy object on it.

- If water penetrates electrical parts of the appliance, disconnect power plug and contact an LG Electronics customer information centre.

- Do not place hands or metallic objects inside the area emitting the cold air, cover or heat releasing grille on the back.

- Do not apply excessive force or impact to the back cover of the appliance.

• Do not put animals, such as pets into the appliance.
• Be careful of nearby children when you open or close the appliance door. The door may bump the child and cause injury.

- Avoid the danger of children getting trapped inside the appliance. A child trapped inside the appliance can cause suffocation.

• Do not place heavy or fragile objects, containers filled with liquid, combustible substances, flammable objects(such candles, lamps, etc.), or heating devices(such as stoves, heaters, etc.) on the appliance.

• If there is a gas leakage (isobutane, propane, natural gas, etc.), do not touch the appliance or power plug and ventilate the area immediately. This appliance uses a refrigerant gas (isobutane,R600a). Although it uses a small amount of the gas, it is still combustible gas. Gas leakage during appliance transport, installation or operation can cause fire, explosion or injury if sparks are caused.

• Do not use or store flammable or combustible substances (ether, benzene, alcohol, chemical, LPG, combustible spray, insecticide, air freshener, cosmetics, etc.) near the appliance.

• Immediately unplug the power plug and contact an LG Electronics customer information centre if you detect a strange sound, odour, or smoke coming from the appliance.

• Fill with potable water only into icemaker or dispenser water tank.

• Do not damage the refrigerant circuit.
• Do not place any electronic appliance (such as heater and mobile phone) inside the appliance.

Maintenance

• Disconnect the power cord before cleaning the appliance or replacing the inside lamp (where fitted).

• Securely plug the power plug in the socket outlet after completely removing any moisture and dust.

• Never unplug the appliance by pulling on the power cable. Always grip the power plug firmly and pull straight out from the socket outlet.

• Do not spray water or inflammable substances (toothpaste, alcohol, thinner, benzene, flammable liquid, abrasive, etc.) over the interior or exterior of the appliance to clean it.

• Do not clean the appliance with brushes, cloths or sponges with rough surfaces or which are made of metallic material.

• Only qualified service personnel from LG Electronics service centre should disassemble, repair, or modify the appliance. Contact an LG Electronics customer information centre if you move and install the appliance in a different location.

- Do not use a hair drier to dry the inside of the appliance or place a candle inside to remove the odours.

• Do not use mechanical devices or other means to accelerate the defrosting process.
• Connect the water supply line (for plumbed models only) to a potable water source only. Otherwise, impurities in the water may cause illness.

Disposal

• When discarding the appliance, remove the door gasket while leaving the shelves and baskets in place and keep children away from the appliance.
• Dispose of all packaging materials (such as plastic bags and styrofoam) away from children. The packaging materials can cause suffocation.

Technical Safety

• Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.

• Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.

• The refrigerant and insulation blowing gas used in the appliance require special disposal procedures. Consult with service agent or a similarly qualified person before disposing of them.

• This appliance contains a small amount of isobutane refrigerant (R600a), but it is also combustible. When transporting and installing the appliance, care should be taken to ensure that no parts of the refrigerating circuit are damaged.
• Refrigerant leaking out of the pipes could ignite or cause an explosion.
• If a leak is detected, avoid any naked flames or potential sources of ignition and air the room in which the appliance is standing for several minutes. In order to avoid the creation of a flammable gas air mixture if a leak in the refrigerating circuit occurs, the size of the room in which the appliance is used should correspond to the amount of refrigerant used. The room must be 1m^2 in size for every 8 g of R600a refrigerant inside the appliance.
• The amount of refrigerant in your particular appliance is shown on the identification plate inside the appliance.

- Never start up an appliance showing any signs of damage. If in doubt, consult your dealer.

- This appliance is intended to be used in household and similar applications only. It should not be used for commercial, or catering purposes, or in any mobile application such as a caravan or boat.

- Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.

CAUTION

To reduce the risk of minor injury to persons, malfunction, or damage to the product or property when using this product, follow basic precautions, including the following:

Installation

• Do not tilt the appliance to pull or push it when transporting.
• Make sure not to get a body part such as a hand or foot stuck while moving the appliance.

Operation

• Do not touch frozen food or the metal parts in the freezer compartment with wet or damp hands. It may cause frostbite.
• Do not place glass containers, bottles or cans (especially those containing carbonated drinks) in the freezer compartment, shelves or ice bin that will be exposed to temperatures below freezing.
• The tempered glass on the front side of the appliance door or the shelves can be damaged by an impact. If it is broken, do not touch it with hands, as this may result in injury.

- Do not place heavy objects on top of the door in door.

- Do not use the door in door as a chopping board and ensure it is not scratched by a sharp tool, as this may cause appliance damage.

- Do not hang from the appliance door, storage room, shelf or fridge door in door or climb up into it.

- Do not store an excessive amount of water bottles or containers for side dishes on the door baskets. The basket may break or your hand may bump into the surrounding structure, causing injury.

- Keep food organized inside the appliance.

- Prevent animals from nibbling on the power cable or water hose.

- Do not open or close the appliance door with excessive force.

- If the hinge of the appliance door is damaged or operates improperly, stop using the appliance and contact an authorized service centre.

- Do not clean glass shelves or covers with warm water when they are cold. They may break if exposed to sudden temperature changes.

- Never eat frozen foods immediately after they have been taken out in the freezer compartment.

• Do not insert your hands into the mechanical part of the automatic icemaker such as the ice bin or the ice dispenser.
• Do not use a thin crystal cup or chinaware when dispensing.
• Do not remove the cover of the automatic icemaker. Touching any mechanical part of the automatic icemaker. It may result in injury.
• Make sure not to get a hand or foot stuck upon opening or closing the appliance door.
• Do not open the door of the appliance with the door in door open, or do not open the door in door while the door of the appliance is open. The door in door may be struck by the edge of the appliance and damaged.

Maintenance

• Do not insert the shelves upside down. The shelves may fall, causing injury.
• To remove frost from the appliance, contact an LG Electronics customer information centre.
• Dispose of the ice inside the ice bin in the freezer compartment during an extended power outage.

INSTALLATION

EN

Compartments

Line drawing of a double door refrigerator with a front-mounted device (no text or symbols)

Movable Egg Box (Optional) Freezer Basket Owner's Manual

Spanner Ring Sheet

- The appearance or components of the appliance may differ from model to model.

Notes for Movement and Transport

• Remove all food from inside the appliance. Then, transport the appliance only after fixing fragile parts such as shelves and the door handle with tape. Failure to do so may cause appliance damage.
• Pull the power plug out, insert and fix it into the power plug hook at the rear or on top of the appliance. Failure to do so may cause damage to the power plug or floor scratch.
• When transporting the appliance, more than two people should transport the appliance carefully. Dropping the appliance, which is extremely heavy, may cause personal injury or appliance failure.
• When transporting the appliance over a long distance, keep the appliance upright. The appliance may fall over, causing malfunctions. Never transport the appliance laying down as it can cause a refrigerant circulation malfunction when it is turned back on again.

Notes for Installation

• Install the appliance on a solid and flat area.

- If the appliance is installed on an uneven floor, it can cause vibration and noise causing the appliance to fall resulting in injury. It could also cause the doors not to close correctly and introduce moisture inside the unit during operation.

- If the appliance front or rear is not level, adjust the front feet so that it can be corrected. Severe cases may need the floor to be packed out with strips of thin timber.

• Avoid placing the unit near heat sources, direct sunlight or moisture.

• Connect the power supply cord (or plug) to the outlet. Don't double up with other appliances on the same outlet.

• After connecting the power supply cord (or plug) to the outlet, Wait two or three hours before you put food into the appliance. If you add food before the appliance has cooled completely, your food may spoil.

• After installing the appliance, connect the power plug into a socket outlet. Before moving and discarding the appliance, disconnect the plug from the socket outlet.

Dimensions and Clearances

- Too small of a distance from adjacent items may result in the degradation of freezing capability and increased electricity costs. Allow over 50 mm of clearance from each adjacent wall when installing the appliance.

A B C D E F G

- Size
A 912 mm
B 1785 mm
C 904 mm
D 5 mm
E 899 mm
F 1366 mm
G 1713 mm

Ambient Temperature

• The appliance is designed to operate within a limited range of ambient temperatures, depending on the climate zone. Do not use the appliance at a temperature exceeding the limit.
• The internal temperature could be affected by the location of the appliance, the ambient temperature, the frequency of door opening and so on.
• The climate class can be found on the rating label.

Climate Class	Ambient Temperature Range °C
SN (Extended Temperate)	+10 - +32
N (Temperate) +16 - +32
ST (Subtropical) +16 -	+38
T (Tropical) +16 - +43	/ +10 - +43*

*Australia, India, Kenya

NOTE

- The appliances rated from SN to T are intended to be used at an ambient temperature between 10 °C and 43 °C.

Removing the Door

When it is necessary to move the appliance through a narrow opening, removing the doors is the recommended procedure.

WARNING

- Disconnect the power cord, house fuse or circuit breaker before installing or servicing the appliance. Failure to follow these instructions may result in death, fire or electric shock.

If your entrance door is too narrow for the appliance to pass through, remove the appliance doors and pass the appliance laterally.

[For freezer door only]

1 Hold the 2 tube connectors at the bottom of the appliance with your fingers and pull them out so that the hoses can then be carefully removed by following the instructions in step 2.

Technical diagram showing a mechanical assembly with an inset close-up of a component detail labeled '100'.

2 While pressing the collet part of the tube connector, remove the connected water tube.

Tube connector Collet Water tube

[For both freezer and fridge]

3 Remove the screw of the hinge cover on top of the appliance by rotating it counterclockwise.

Technical line drawing of a mechanical assembly with a tool and base (no text or symbols)

4 While pressing (1) hook of the link of the electrical connectors, remove the link by pulling it in both directions.

Technical line drawing of a mechanical clamp or bracket assembly with an inset showing a close-up of the component (no text or symbols present)

5 Remove the hinge lever by tapping the end of it toward the outside edge of the cabinet.

Mechanical assembly diagram showing a lever mechanism with no visible text or symbols

CAUTION

- When removing the upper hinge, be sure to support the door as it will fall forwards. It is recommended that two or more people carry out the door removal and refitting.

6 Lift the upper hinge fixed between the appliance and the appliance door and then remove it.

Upper hinge Door

7 Remove the freezer and fridge compartment door by lifting it upward. At this time, the door should be lifted enough for the steel pipe to be completely pulled out.

Diagram of a cable being inserted into a wall socket (no text or symbols)

NOTE

• When moving the freezer door, be careful not to damage the water tubes. The doors should be laid down on a blanket in a safe area once they have been removed.
• If the water tube end is damaged, it should be trimmed to ensure it does not leak when refitted.

Not straight Damaged Stretched

Refitting the Door

Mount the doors in the reverse sequence of their removal once the appliance has been passed through all access doors.

Adjusting the Height of the Door

If the door of the appliance is not level, adjust the difference in the height of appliance door using the following method.

NOTE

- Because the hinge pin may fall out, do not adjust the height of the appliance door more than 5 cm.

[Method1]

*Reference

Spanner Keeper nut Adjustment hinge pin

1 Loosen the keeper nut by rotating it counterclockwise using a 19 mm spanner.

To loosen the nut

2 Adjust the difference in the height of the appliance door by rotating the adjustment hinge pin clockwise or counterclockwise with an 8 mm spanner.

3 After adjusting the difference in the height of the appliance door, fasten the keeper nut by rotating it clockwise.

To tighten the nut

If it is impossible to adjust the height of the appliance door through the above method, level the door according to the following guide.

[Method2]

1 When the appliance door is removed, loosen the screw at the bottom of the lower hinge.

2 Insert the appropriate number of ring sheets between the lower hinge and the lower bracket. (Total number of ring sheets: 2)

Ring sheet Lower hinge Lower bracket

3 Resecure the bracket screw after fitting the ring sheets before refitting the door. When the door is refitted, steps 1,2 and 3 of adjusting the height of the door can then be repeated.

CAUTION

- When tilting the appliance backward to loosen the screw at the bottom of the appliance, two or more people should hold the handles at the bottom and rear top side of the appliance.

Connecting the Water Line (For Plumbed models Only)

Accessories

Water Filter Water Tube Installation Parts

Water Supply Requirements

A cold water supply with water pressure between 138 kPa and 827 kPa (1.4-8.4 kgf/cm²) is required to operate the water dispenser. If the refrigerator is installed in an area with low water pressure (below 138 kPa), you can install a booster pump to compensate for the low pressure.

If a reverse osmosis water filtration system is connected to your cold water supply, the water pressure to the reverse osmosis system needs to be a minimum of 138 kPa to 827 kPa (1.4-8.4 kgf/cm²)

WARNING

• Unplug the appliance before carrying out any work on connecting the water line. Failure to do so may cause electric shock.
• Only connect the water line to a cold water supply. Failure to do so may cause the water filter to malfunction. Water hammer (water banging in the pipes) in house plumbing can cause damage to appliance parts and can lead to water leakage or flooding.
• Connecting the water line must only be installed by a qualified plumber and in accordance with local legislation and regulations governing water quality.

NOTE

- This water line installation is not covered by the appliance warranty.

Connecting to the Appliance

1 Unscrew the metal threaded collar nut at the back of the appliance and place it over one end of the water tube.
2 Firmly push the water tube onto the water inlet valve and tighten up the collar nut.

Diagram showing a mechanical assembly process with arrows indicating transformation (no text or symbols)

Connecting to the Water Filter

There are two types of filters. The methods of connection are different. One has a threaded plastic nut fitting and the other uses a self locking push fit connectors. The filter is marked with the direction of the water flow from the water tap to the appliance.

1 Cut the tubing end squarely, then check for and remove any burrs. Push the fitting onto the end of tubing, making sure the end is fully sealed.

(1) (2) Colored line in the water filter

2 Tighten the screw cap until the colored line in the water filter is no longer visible.

Simple line drawing of a mechanical component with a curved arrow indicating rotation (no text or symbols)

3 Unlock the fitting by twisting until the colored line in the water filter is visible and a clicking sound is heard. Press the collet squarely against the face of the tubing to remove it from the fitting.

(1) (2) (3)

1 Firmly push the water tube connected from the appliance into the end that has the arrow pointing outward. Push the tube all the way in (approx. 10-12 mm).

Diagram of a mechanical component with a curved arrow indicating direction (no text or symbols)

2 After inserting the tube securely into the filter, fit the locking clip into position under the pull up collar.

3 Repeat on the other end of the filter using the remainder of the water tube.

Checking the Water Connection

1 Turn on the water supply and switch on the appliance. Carefully check all fittings for possible leaks due to poorly fitted hoses.

2 Press and hold the Water Filter button for three seconds. That resets the Replacement Filter icon. The new water filter has been activated.

3 Place a cup under the water dispenser to verify that water is flowing through the appliance.

4 Check the connecting tube and joints for leaks once again.

5 The water filter should be fixed at a appropriate place where it is easy to reach for replacement purposes.

Parts and Functions

Line drawing of a refrigerator with labeled compartments (no text or symbols)

1 Control Panel

Displays the ice maker and dispenser modes the water filter status.

② Door in Door (Optional)

The Door in Door is a double layered door system. It can be opened individually or together with the main door. You can conveniently locate and access your favourite snacks or food items.

3 Door in Door Lever (Optional)

This lever opens Door in Door.

- The appearance or components of the appliance may differ from model to model.

Diagram of an open refrigerator with numbered compartments and labeled parts

1 Automatic Icemaker

This is where ice is automatically produced and stored.

- When not being used to make ice, the icemaker can be used as a freezer door basket.

② Freezer Door Basket

This is where small packages of frozen food can be stored.

- Do not store ice cream or food which will be stored for a long period of time within these baskets.

③ LED Lamp

The LED lamps inside the appliance light up when you open the door.

4 Freezer Shelf (Optional)

This is where frozen foods such as meat, fish, and ice cream can be stored.

5 Freezer Drawer (Optional)

This is for long-term storage of frozen items.

NOTE

- The 2-star section ( ** ) basket or drawer can be used to store ice and food from -12 °C to -18 °C for short periods.

- The top shelf of the freezer(1) will reach the set temperature the most quickly.

Diagram of an open refrigerator with numbered compartments for identification

1 Smart Diagnosis Unit

Use this function when contacting LG Electronics customer information centre to help make an accurate diagnosis when the appliance operates abnormally or a failure occurs.

② LED Lamp

The LED lamps inside the appliance light up when you open the door.

3 Hygiene Fresh

This function minimizes bacteria and odor inside the appliance.

4 Fridge Shelf

This is where refrigerated foods and other items are stored.

- Store the foods with higher moisture content at the front of the shelf.

- The actual number of shelves will differ from model to model.

5 Fresh Vegetable Drawer (Optional)

This is where fruits and vegetables are stored to help maintain freshness by adjusting the humidity controller.

⑥ Vegetable Drawer

This is where fruits and vegetables are stored to remain fresh for as long as possible.

- The actual number of drawers will differ from model to model.

Diagram of an open refrigerator with numbered compartments for identification

7 Door in Door (Optional)

This is where foods which are taken out frequently such as beverages and snacks are stored.

8 Fridge Door Basket

This is where small packages of refrigerated foods, drinks and sauce containers are stored.

9 Movable Egg Box (Optional)

This is where eggs are stored.

- You can move it to and use it at a desired position as needed. However, do not use it as the ice bin or place it on the shelf on top of the fridge or the vegetable drawer.

Notes for Operation

• Do not use the ice water dispenser tank for beverages other than drinking water.
• Users should keep in mind that frost can form. If the door is not closed completely, if the humidity is high during the summer, or if the freezer door is opened frequently.
• Ensure there is sufficient space between food stored on the shelf or door basket to allow the door to close completely.
• Opening the door lets warm air enter the appliance, and may cause the internal temperature to rise.
• Do not open or close the appliance door excessively.
• The LED lamp is only intended for use in domestic appliances and is not suitable for household room illumination.
• If you are leaving the appliance turned off for an extended period of time, remove all food and unplug the power cord. Clean the interior, and leave the doors slightly ajar to prevent mold from growing in the appliance.

Suggestion for Energy Saving

• Ensure there is sufficient space between stored foods. This allows cold air to be circulated evenly and lowers electricity bills.
• Store hot food only after it has cooled in order to prevent dew or frost.
• When storing food in the freezer compartment, set the freezer temperature lower than the temperature indicated on the appliance.
• Do not set the temperature of the appliance lower than needed. For ice making in normal climates, the freezer temperatures should be set to -19 °C or colder.

• Do not put food near the temperature sensor of the fridge compartment. Keep a distance of at least 3 cm from the sensor.

• Please note that a temperature rise after defrosting has a permissible range in the appliance specifications. If you wish to minimise the impact this may have on the food storage due to a temperature rise, seal or wrap the stored food in several layers.

• The automatic defrosting system in the appliance ensures that the compartment remains free of ice buildup under normal operating conditions.

Storing Foods Effectively

• Store frozen food or refrigerated food inside sealed containers.
• Check the expiration date and label (storage instructions) before storing food in the appliance.
• Do not store food for a long period of time (more than four weeks) if it spoils easily at a low temperature.
• Place the refrigerated food or frozen food in each fridge or freezer compartment immediately after purchasing.
• Avoid refreezing any food which has been completely thawed. Freezing any food which has been completely thawed again will lower its taste and nutrition.
• Do not wrap and store vegetables with newspaper. Printing material of newspaper or other foreign substances may smear and contaminate food.
• Do not overfill the appliance. Fill less than 70% of the space. Cold air can not circulate properly if the appliance is overfilled.
• Cool hot food before storing. If too much hot food is placed inside, the internal temperature of the appliance can increase and negatively affect other foods stored in the appliance.

• If you set an excessively low temperature for food, it may become frozen. Do not set a temperature lower than the required temperature for the food to be stored correctly.
  • Always keep the appliance clean.

• If there are chill compartments in the appliance, do not store vegetables and fruits with higher moisture content in the chill compartments as they may freeze due to the lower temperature.

• In the event of a blackout, call the electricity company and ask how long it is going to last.

- You should avoid door openings while the power is off.

- When the power supply gets back to normal, check the condition of the food.

Max Freezing Capacity

• The Express Freeze function will allow the freezer to its maximum freezing capacity. This generally takes up to seven hours, however, it will automatically turn off after a given time and can also be turned off manually at any given time.
• To get better air circulation, insert all inner parts like baskets, drawers, and shelves.

Maximum Storage

• To get better air circulation, insert all drawers.
- If large quantities of food are to be stored, all the freezer drawers shall be taken out of the appliance except the bottom one and the food shall be stacked directly on the freezer shelves in the freezer compartment.

NOTE

• To remove the drawers, first pick the food out of drawers. Then use the handle of drawers, pull out the drawers carefully. It may cause injury.
• The shape of each drawer may be different, insert in the right position.

Using Control Panel

Units and Functions

Power 1 Hygiene Fresh | Express Frz. *Wi-Fi | Freezer | Fridge | Water Filter *Filter Reset | *Lock 7 8 Cubed | Water | Crushed *Extra Function : Hold 3sec.

① Hygiene Fresh

• This sets the Hygiene Fresh function.

② Express Freeze

• This sets Express Freeze functions.

③ Freezer Temperature

• This sets the freezer target temperature.

4 Fridge Temperature

• This sets the fridge target temperature.

5 Replacement Filter (Optional)

- This shows the replacement period of the water filter automatically (plumbed models only).

6 \*Lock

- This locks the buttons on the control panel.

7 \* Wi-Fi

- This sets the appliance to connect to your home's Wi-Fi network.

8 Water Dispenser

- This sets the function of Cubed ice, Water, Crushed ice.

- The actual control panel may differ from model to model.

Notes for Using the Control Panel

- The control panel will turn on in any of the following cases.

• When the power is turned on
• When a button is pressed
• When the appliance door (fridge compartment, freezer compartment, door in door) is opened

- The control panel will turn off automatically for energy saving in any of the following cases.

• When one minute has passed after turning on the power
• When no button operation is carried out for 20 seconds after a desired button is pressed
• When 20 seconds has passed after the appliance door (fridge compartment, freezer compartment, door in door) is opened and closed

- If there is any finger or skin contact to the control panel while cleaning it, the button function may operate.

Setting Hygiene Fresh

Bacteria and odor inside the appliance can be minimized with the Hygiene Fresh function. However, the function is only effective for bacteria floating in the appliance, not bacteria adsorbed onto food.

- Each time you press the Hygiene Fresh button, the Hygiene Fresh function mode will change to Auto → Power → Off → Auto alternatively.

Setting Express Freeze

The function can quickly freeze a large amount of ice or frozen foods.

- When you press the Express Freeze button, the Express Freeze icon lights on the control panel.

• The function is enabled and disabled in turn each time you press the button.
• The Express Freeze function automatically terminates after a specific period has passed.

Setting the Temperature

This sets the fridge temperature or freezer temperature.

- Press the Fridge button or Freezer button to adjust the temperature.

• The initial temperature is set.

• Fridge : 4 °C
• Freezer : -19 °C

• The temperature can be adjusted.

• Fridge : from 1 °C to 7 °C
  – Freezer : from -14 °C to -24 °C

- The actual inner temperature varies depending on the food status, as the indicated setting temperature is a target temperature, not actual temperature within the appliance.

NOTE

• The default temperature setting may vary depending on the appliance.
• Wait until two or three hours have passed after connecting the appliance to the outlet before storing food in the appliance.

Setting and Resetting Lock

This locks the buttons on the control panel.

• Press and hold the Lock button for 3 seconds. When the Lock function is set, all buttons are locked.

• When you press the Lock button for 3 seconds, the Lock icon on the control panel lights. The function is enabled and disabled in turn each time you press the button.

• If you press a button other than lock when the lock is set, the button will not function.

• When you press a button other than lock when the lock is set, the Lock icon on the control panel will flash 3 times.
• To change a setting, first press the Lock button for three seconds to disable the function.

Water and Ice Dispenser

You can dispense cubed ice, water and crushed ice by pressing the respective button for the desired mode.

• When you press the Cubed, Water or Crushed button on the control panel, the lamp on the control panel will turn on and the desired mode will be set. At this time, when you press the dispenser lever, the selected function (cubed ice, water and crushed ice) will be dispensed.
• The function is enabled and disabled in turn each time you press the button on the control panel.

Cubed | Water | Crushed

CAUTION

• Keep children away from the dispenser to prevent children playing with or damaging the controls.
• Throw away the first few batches of ice (about 20 cubes and 7 cups of water). This is also necessary if the appliance has not been used for a long time.

NOTE

• If you open the freezer door while water is being dispensed, the water supply will stop and the control panel will return to the initial screen.
• If you open the fridge door while water, cubed ice or crushed ice is being dispensed, dispensing will be paused. When you close the door, the selected item for the previously set mode will continue to be dispensed.
• If the cup rim is small, water may splash out of the glass or miss it completely.
• Use a cup with a rim of over 68 mm in diameter when dispensing water, cubed ice or crushed ice.
• When the ice maker produces smaller ice cubes, or the cubes become lumped together, the amount of water supplied to the ice maker may be low due to insufficient water in the water tank. If ice is not used frequently, it may also lump together.

Automatic Icemaker

The automatic icemaker can automatically make 6 cubes at a time, 50-60 pieces within a 24hr period if conditions are favorable. This amount may vary according to the environment (ambient temperature around the appliance, frequency of the door being opened, amount of food stored in the appliance, etc.).

• If the ice bin is completely filled with ice, ice production will stop.
• Sound of ice dropping into the ice bin is normal.

• The icemaker produces ice normally when approximately 48 hours have passed after the appliance is initially installed.

• Discard ice produced for the first time without using it.

• While the automatic icemaker is operating, do not touch it with your hands directly.
• If ice cubes are stored in the ice bin for a long period of time, they may clump together and may not be separated easily. In such a case, clean the ice bin before using it.

Switching the Automatic Icemaker On and Off

1 Hold and remove the cover of the automatic icemaker by lifting it upward.

2 When the automatic icemaker is not used, the ice bin can be used as a freezer basket after selecting the icemaker switch to the off position.

Technical line drawing of a mechanical device with an inset close-up showing internal components (no text or symbols)

Removing the Ice Bin (Optional)

Hold the ice bin with both hands and pull it out while lifting it upward.

Diagram showing a door mechanism transforming into a smaller storage unit (no text or symbols present)

• When the automatic icemaker is not used, the ice bin can be used as a freezer basket.
• If the ice bin is completely filled with ice, it may be heavy. Remove it using both hands.

WARNING

• Do not touch the automatic icemaker mechanical parts with your hand or a tool. Otherwise, appliance damage or injury may occur.
• Caution should be taken, as the automatic icemaker operates continuously after the freezer door is opened when the automatic icemaker switch is set to the on position.
• Do not disassemble, repair or alter the automatic ice maker. These tasks should only be done by a service technician.

CAUTION

• Throw away the first few batches of ice (about 20 cubes and 7 cups of water). This is also necessary if the appliance has not been used for a long time.
• The first ice and water dispensed may include particles or odor from the water supply line or the water tank.

• Keep children away from the dispenser. Children may play with or damage the controls.

• The ice passage may become blocked with frost if only crushed ice is used. Remove the frost that accumulates by removing the ice bin and clearing the passage with a rubber spatula. Dispensing cubed ice periodically can also help prevent frost buildup.

• If discolored ice is dispensed, check the water tank and the water supply for a possible source. If the problem continues, contact the LG Electronics customer information centre. Do not use the ice or water until the problem is corrected.
• Never use thin crystal glass or crockery to collect ice. Such containers may chip or break resulting in glass fragments in the ice.
• Dispense ice into a glass before filling it with water or other beverages. Splashing may occur if ice is dispensed into a glass that already contains liquid.
• Do not touch the ice outlet or the automatic icemaker with your hand or a tool. Otherwise, appliance damage or injury may occur.
• When refitting the ice bin, ensure it is placed correctly. If it is tilted or unleveled, it may not continue to make ice due to sensor disruption.
• Never use a glass that is exceptionally narrow or deep. Ice may jam in the ice passage and appliance performance may be affected.
• Keep the glass at a proper distance from the ice outlet. A glass held too close to the outlet may prevent ice from dispensing.
• Dispose of the ice inside the ice bin in the freezer compartment if you go out on vacation or an extended power outage occurs. Water from melting ice may drop from the dispenser onto the floor.

Door in Door (Optional)

Pull the lever at the bottom of the door upwards until the door in door opens.

There is plenty of storage space inside the door in door and its surrounding baskets, allowing you to store food in an organized manner.

Diagram illustrating a hand holding a tool with an upward arrow, showing a step and directional motion.

Removing the Case from the Door in Door

Hold the case from inside the door in door with both hands and remove it by lifting it upward.

Diagram of a refrigerator with double-headed arrows indicating ventilation or movement (no text or symbols)

Refitting the Door in Door Case

Mount them in the reverse order of the removal process.

Removing the Baskets from the Door in Door

1 Hold both edges of the basket and remove it by lifting it upward.

Illustration of a refrigerator with an inset showing hand holding a rectangular object (no text or symbols present)

2 Lift the fixed basket up as shown in (1) and remove it by pulling it out as shown in (2).

Diagram of a refrigerator interior showing two labeled compartments (1) and (2), with no text or symbols beyond labels.

Refitting the Baskets to the Door in Door

Mount them in the reverse order of the removal process.

Fresh Vegetable Drawer (Optional)

The Humidity in the vegetable crisper drawer can be controlled by sliding the lever in either direction.

If moved to the left side, the air guide will be open and allow air to circulate through the drawer for reduced humidity. And if moved to the right side, the air guide will be closed and will maintain any humidity that is currently in the crisper drawer.

The closed state is recommended for storing vegetables, and open state is recommended for storing fruit.

Type 1 Type 2

Other Functions

Door Open Alarm

The alarm sounds 3 times in 30 second intervals if the door (fridge compartment, freezer compartment, door in door) is left open or not completely closed for one minute.

- Contact the LG Electronics customer information centre if the alarm sound continues even after closing the door.

Failure Detection

The appliance can automatically detect problems during the operation.

- If a problem is detected, the appliance may not operate and an error code is displayed even when any button is pressed.

- When this occurs, do not turn off the power and immediately contact the LG Electronics customer information centre. If you turn off the power, the repair technician from the LG Electronics customer information centre may have difficulty finding the problem.

Using LG SmartThinQ Application

• For appliances with the or logo

Things to check before using LG SmartThinQ

1 Check the distance between the appliance and the wireless router (Wi-Fi network).

- If the distance between the appliance and the wireless router is too far, the signal strength becomes weak. It may take a long time to register or installation may fail.

2 Turn off the Mobile data or Cellular Data on your smartphone.

- For iPhones, turn data off by going to Settings → Cellular → Cellular Data.

3 Connect your smartphone to the wireless router.

NOTE

• To verify the Wi-Fi connection, check that Wi-Fi icon on the control panel is lit.
• The appliance supports 2.4 GHz Wi-Fi networks only. To check your network frequency, contact your Internet service provider or refer to your wireless router manual.

• LG SmartThinQ is not responsible for any network connection problems or any faults, malfunctions, or errors caused by network connection.

• If the appliance is having trouble connecting to the Wi-Fi network, it may be too far from the router. Purchase a Wi-Fi repeater (range extender) to improve the Wi-Fi signal strength.

• The Wi-Fi connection may not connect or may be interrupted because of the home network environment.
• The network connection may not work properly depending on the Internet service provider.
• The surrounding wireless environment can make the wireless network service run slowly.
• The appliance cannot be registered due to problems with the wireless signal transmission. Unplug the appliance and wait about a minute before trying again.

- If the firewall on your wireless router is enabled, disable the firewall or add an exception to it.

• The wireless network name (SSID) should be a combination of English letters and numbers. (Do not use special characters.)
• Smartphone user interface (UI) may vary depending on the mobile operating system (OS) and the manufacturer.
• If the security protocol of the router is set to WEP, you may fail to set up the network. Please change it to other security protocols (WPA2 is recommended) and register the product again.

Installing LG SmartThinQ

Search for the LG SmartThinQ application from the Google Play Store or Apple App Store on a smart phone. Follow instructions to download and install the application.

Wi-Fi Function

Communicate with the appliance from a smart phone using the convenient smart features.

Firmware Update

Keep the appliance performance updated.

Smart Diagnosis™

If you use the Smart Diagnosis function, you will be provided with the useful information such as a correct way of using the appliance based on the pattern of use.

Settings

Allows you to set various options on the refrigerator and in the application.

NOTE

• If you change your wireless router, Internet service provider, or password, delete the registered appliance from the LG SmartThinQ application and register it again.
• The application is subject to change for appliance improvement purposes without notice to users.
  • Functions may vary by model.

Connecting to Wi-Fi

The Wi-Fi button, when used with the LG SmartThinQ application, allows the appliance to connect to a home Wi-Fi network. The Wi-Fi icon shows the status of the appliance's network connection. The icon illuminates when the appliance is connected to the Wi-Fi network.

Initial Appliance Registration

Run the LG SmartThinQ application and follow the instructions in the application to register the appliance.

Re-registering the Appliance or Registering Another User

Press and hold the Wi-Fi button for 3 seconds to temporarily turn it off. Run the LG SmartThinQ application and follow the instructions in the application to register the appliance.

NOTE

- To disable the Wi-Fi function, press and hold the Wi-Fi button for 3 seconds. Wi-Fi icon will be turned off.

Open Source Software Notice Information

To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com.

In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to [e-mail]. This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in receipt of this information.

Using Smart Diagnosis™

• For appliances with the or logo

Smart Diagnosis™ Through the Customer Information Centre

Use this function if you need an accurate diagnosis by an LG Electronics customer information centre when the appliance malfunctions or fails. Use this function only to contact the service representative, not during normal operation.

1 Press the Lock button to activate the lock function.

• If the lock function has been activated already, press the Lock button to deactivate the lock function, and then press the Lock button again to activate the lock function.
• Please note that the Smart Diagnosis function will not operate until five minutes has passed since the lock function was activated.

2 Open the fridge door and then hold the phone on the upper right speaker hole.

- Position the phone so that its microphone is aligned with the speaker hole.

Technical line drawing of a mechanical bracket with an inset close-up showing a component detail (no text or symbols)

3 Press and hold the Freezer button for three seconds or longer while continuing to hold your phone to the speaker.

4 After the data transfer is complete, the service agent will explain the result of the Smart Diagnosis™.

NOTE

• Position the phone so that its microphone is aligned with the speaker hole.
• The Smart Diagnosis™ sound is generated after pressing the Freezer button for three seconds.
• Hold the phone to the upper right speaker hole and wait while the data is transmitted.
• Do not take the phone off the speaker hole while the data is transmitted.
• The data transfer sound may be harsh to the ear while the Smart Diagnosis™ data is being transmitted, but do not take the phone off the speaker hole for accurate diagnosis until the data transfer sound has stopped.
• When the data transfer is complete, the transfer completion message is displayed and the control panel is automatically turned off and then on again after a few seconds. Afterwards the customer information centre explains the diagnosis result.
• The Smart Diagnosis™ function depends on the local call quality.
• The communication performance will improve and you can transmit a better signal if you use a land line home phone.
• If the Smart Diagnosis™ data transfer is poor due to poor call quality, you may not receive the best Smart Diagnosis™ service.

Notes for Cleaning

• When removing a shelf or drawer from inside the appliance, remove all stored foods from the shelf or drawer to prevent injury or damage to the appliance.
• Otherwise, injury may occur due to the weight of stored foods.
• If cleaning the outside air vents of the appliance by means of vacuuming, then the power cord should be unplugged from the outlet to avoid any static discharge that can damage the electronics or cause an electric shock.
• Detach the shelves and drawers and clean them with water, and then dry them sufficiently, before replacing them.
• Regularly wipe the door gaskets with a wet soft towel.
• Door basket spills and stains should be cleaned as they can compromise storage ability of the basket and could even be damaged.
• After cleaning, check if the power cable is damaged, warm or improperly plugged.
• Keep the air vents on the exterior of the appliance clean.

- Blocked air vents can cause fire or appliance damage.

• Waxing external painted metal surfaces helps provide rust protection. Do not wax plastic parts. Wax painted metal surfaces at least twice a year using appliance wax (or auto paste wax). Apply wax with a clean, soft cloth.
• When cleaning the inside or outside of the appliance, do not wipe it with a rough brush, toothpaste, or flammable materials. Do not use cleaning agents containing flammable substances.

- This may cause discoloration or damage to the appliance.

- Flammable substances: alcohol (ethanol, methanol, isopropyl alcohol, isobutyl alcohol, etc.), thinner, bleach, benzene, flammable liquid, abrasive, etc.

- For the appliance exterior, use a clean sponge or soft cloth and a mild detergent in warm water. Do not use abrasive or harsh cleaners. Dry thoroughly with a soft cloth.

• Never clean the shelves or containers in the dishwasher.
• The parts may become deformed due to the heat.
• If the appliance is equipped with an LED lamp, do not remove lamp cover and LED lamp in any attempt to repair or service it. Please, contact the LG Electronics customer information centre.

Cleaning the Door Basket Removing the Fridge/Freezer Door Basket

Hold both edges of the basket and remove it by lifting it upward.

Refitting the Fridge/Freezer Door Basket

1 Hold both edges of the door basket, gently push one edge to assemble, and then in the same manner assemble the other edge.

Illustration of a hand pressing down on a rectangular object with a downward arrow (no text or symbols)

2 After assembling, tap the door basket gently to fix it horizontally.

Illustration of a hand holding a pipe fitting with a downward arrow indicating force or direction (no text or symbols)

Cleaning the Shelf

Removing the Fridge/Freezer Shelf

Remove the shelf by pulling it out.

Illustration of two hands holding a tray with a black arrow pointing downward (no text or symbols)

Refitting the Fridge/Freezer Shelf

Remove the shelf by pulling it out while slightly lifting the rear edge of the fridge shelf.

Cleaning the Vegetable Drawer

Removing the Vegetable Drawer

1 Remove the contents of the drawer. Hold the handle of the vegetable drawer and pull it out completely until it outward gently until it stops.

2 Lift the vegetable drawer up and remove it by pulling it out.

Refitting the Vegetable Drawer

1 If the vegetable drawer has a cover, lift it.

2 Insert the bottom of the vegetable drawer into its original position and gently push it back in while lowering it.

CAUTION

- Please note that injuries can be caused by the weight of stored foods when removing the vegetable drawer.

Cleaning the Water Dispenser Cleaning the Dispenser Tray

The dispenser tray may become wet easily due to spilled ice or water. Wipe the entire area with a damp cloth.

Simple line drawing of a device with a handle and a folded paper or plastic sheet (no text or symbols)

Cleaning the Water and Ice Outlet

Wipe the water or ice outlet frequently with a clean cloth as it may get dirty easily. Please note that lint from a cloth may adhere to the outlet.

Water Outlet Ice Outlet

Replacing the Water Filter (For Plumbed models Only)

Replace the disposable water filter when indicated on the Replacement Filter icon or at least every 6 months.

To give you enough time to get a new filter, the light will come on just before the capacity of the current filter runs out. Changing the filter on time ensures that you always get fresh and clean water from the appliance.

1 Unplug the appliance.
2 Turn off the water supply to the appliance.
3 Remove the disposalbe water filter.
4 Install the replacement water filter by following the 'Connecting to the Water Filter' section.
5 Turn on the water supply and switch on the appliance.
6 Press and hold the Water Filter button for three seconds. That resets the Replacement Filter icon. The new water filter has been activated.

Symptoms Reason	Solution
There is no refrigeration or freezing.	Is there a power interruption?	·Check the power of other appliances.
	If the power plug unplugged from the outlet?	·Plug the power plug in the outlet properly.
There is poor refrigeration or freezing.	Is the fridge or freezer temperature set to its warmest setting?	·Set the fridge or freezer temperature to 'Medium'.
	Is the appliance in direct sunlight, or is it near a heat generating object such as cooking oven or heater?	·Check the installation area and reinstall it away from heat generating objects.
	Did you store hot food without cooling it first?	·Cool the hot food first before putting it in the fridge or freezer compartment.
	Did you put in too much food?	·Maintain an appropriate space between food.
	Are the appliance doors completely closed?	·Completely close the door and make sure that stored food is not obstructing in the door.
	Is there enough space around the appliance?	·Adjust the installation position to make enough space around the appliance.
The appliance contains a bad smell.	Is the fridge or freezer temperature set to 'Warm'?	·Set the fridge or freezer temperature to 'Medium'.
	Did you put in food with a strong smell?	·Store foods with strong smells in a sealed containers.
	Vegetables or fruit may have spoiled in the drawer?	·Throw away rotten vegetables and clean the vegetable drawer. Do not store vegetables too long in the vegetable drawer.
The inside lamp in the appliance does not turn on.	Does the inside lamp in the appliance turn off?	·It is not possible for customers to replace the inside lamp in the appliance as they are not serviceable. If the inside lamp does not turn on, please contact the LG Electronics customer information centre.
The appliance door is not closed tightly.	Is the appliance leaning forward?	·Adjust the front feet to raise the front side slightly.
	Were the shelves properly assembled?	·Refit the shelves if needed.
	Did you close the door with excessive force?	·If you apply too much force or speed when closing the door, it may remain briefly open before closing. Make sure that you do not slam the door closed. Close without force.
It is difficult to open the appliance door.	Did you open the door right after you closed it?	·If you try to open the appliance door within one minute after you closed it, you may have difficulties because of the pressure inside the appliance. Try to open the appliance door again in a few minutes so that the internal pressure stabilizes.
There is condensation inside the appliance or on the bottom of the vegetable drawer cover.	Did you store hot food without cooling it first?	·Cool the hot food first before putting it in the fridge or freezer compartment.
	Did you leave the appliance door open?	·Although the condensation will disappear soon after you close the appliance door, you can wipe it with a dry cloth.
	Do you open and close the appliance door too frequently?	·Condensation can form due to the temperature difference from the outside. Wipe out the dampness with a dry cloth.
	Did you put warm or moist food inside without sealing it in a container?	·Store food in a covered or sealed container.
Frost has formed in the freezer compartment.	Doors may not be closed properly?	·Check if the food item inside the appliance is blocking the door and make sure that the door is tightly closed.
	Did you store hot food without cooling it first?	·Cool the hot food first before putting it in the fridge or freezer compartment.
	Is the air entry or exit of the freezer compartment blocked?	·Make sure that air entry or exit is not blocked so that the air can circulate inside.
	Is the freezer compartment overfilled?	·Maintain an appropriate space between items.
Frost or condensation has formed inside or outside the appliance.	Did you open and close the appliance door frequently or is the appliance door improperly closed?	·Frost or condensation can form if the outside air penetrates inside the appliance.
	Is the installation environment humid?	·Condensation can appear on the exterior of the appliance if the installation area is too humid or on a humid day such as a rainy day. Wipe off any moisture with a dry cloth.
The appliance is noisy and generates abnormal sounds.	Is the appliance installed on a weak floor or improperly leveled?	• Install the appliance on a solid and flat area.
	Does the rear of the appliance touch the wall?	• Adjust the installation position to allow enough clearance around the appliance.
	Are objects scattered behind the appliance?	• Remove the scattered objects from behind the appliance.
	Is there an object on top of the appliance?	• Remove the object on top of the appliance.
The side or front of the appliance is warm.	There are anti condensation pipes fitted to these areas of the appliance to reduce condensation forming from around the door area.	• The heat releasing pipe to prevent condensation is installed on the front and side of the appliance. You may feel it particularly hot right after the appliance is installed or during the summer. You can be assured that this is not a problem and is quite normal.
There is water inside or outside of the appliance.	Is there water leakage around the appliance?	• Check if the water has leaked from a sink or another place.
	Is there water on the bottom of the appliance?	• Check if the water is from the thawed frozen food or a broken or dropped container.
The automatic icemaker does not produce ice or produces a small amount of ice.	Did you install the appliance recently?	• The ice maker produces ice normally when approximately 48 hours have passed after the appliance is installed.
	Did you connect the water supply pipe to the appliance and open the supply valve?	• Connect the water supply pipe to the appliance and open the supply valve completely.
	Is the water supply hose bent?	• If the water supply hose is bent, the water flow could be compromised.
	Have you dispensed a large amount of ice recently?	• It takes approximately 24 hours to produce more ice in the automatic icemaker. Please wait.
The automatic icemaker does not produce ice or produces a small amount of ice.	Did you set the ice maker switch or the automatic icemaker button on the control panel to ON?	Press I on the automatic icemaker switch or set ON for the automatic icemaker button on the control panel. (For more details on how to use, visit LG electronics website or use your smart device.)
	Is the temperature of the freezer compartment set too high?	If the set temperature is too warm, ice will be produced slowly or not at all. Set the Freezer temperature to -18 °C for normal operation of the automatic icemaker.
	Have you been opening the appliance door frequently?	If you open the appliance door frequently, cold air will escape, lowering the speed of ice production. Do not open and close the appliance door frequently.
	Is the appliance door completely closed?	If the appliance door is not completely closed, the temperature of the freezer compartment will increase, slowing down the ice production speed. Close the appliance door completely.
Ice is not dispensed.	Is there ice in the ice bin?	Check whether there is ice in the ice bin.
	Is the ice clumped in the ice bin?	Separate the ice bin and shake it. Discard the remaining clumped ice after shaking the ice bin.
	Unable to hear the sound of ice coming out?	In the control panel, select the modes for cubed ice and crushed ice alternately to dispense the ice.
	Is the ice path blocked? (You can check the ice passage by separating the ice bin.)	Ice may not be dispensed properly the ice passage is blocked. Check the ice and clean the ice path regularly.
Water does not come out.	The supply valve may be turned off? (For Plumbed models Only)	Open the water supply valve.
	The water dispenser tank may be empty? (Non plumbed models only)	Fill the water dispenser tank.
	Is the water supply valve closed? (For Plumbed models Only)	Open the water supply valve.
	Are you using unfiltered water?	Unfiltered water can contain a large amount of various heavy metals or foreign substances, so the filter may be clogged in the early stage regardless of the life of the filter.
Water tastes strange.	Is the taste of water different when comparing it with the taste of water from the previous water purifier?	Has the purified water or cold water not been used for an extended period of time?
	Has it been a long time since you installed and replaced the filter?	If an expired filter is used, the purification performance may decline. It is recommended to replace the filter according to the filter replacement period.
	Have you flushed out the filter properly in the initial stage after installing it?	When you install or replace the filter for the first time, you need to remove air and activated carbon residue from inside the filter. Use the appliance after dispensing and discharging approximately 5 litres of purified water from the dispenser by pressing the water dispensing lever. (Activated carbon is harmless to humans.)
	Has the purified water or cold water not been used for an extended period of time?	The taste of old water may change due to bacterial growth. Use the product after dispensing and discharging approximately 5 litres (approximately three minutes) from the water dispenser.
Clicking noises	The defrost control will click when the automatic defrost cycle begins and ends. The thermostat control (or appliance control on some models) will also click when cycling on and off.	Normal Operation
Rattling noises	Rattling noises may come from the flow of appliance, the water line on the back of the unit (for plumbed models only), or items stored on top of or around the appliance.	Normal Operation
	Appliance is not resting evenly on the floor.	Floor is weak or uneven or leveling legs need to be adjusted. See the Door Alignment section.
	Appliance with linear compressor was moved while operating.	Normal operation. If the compressor does not stop rattling after three minutes, turn the power to the appliance off and then on again.
Whooshing noises	Evaporator fan motor is circulating air through the fridge and freezer compartments.	Normal Operation
	Air is being forced over the condenser by the condenser fan.	Normal Operation
Gurgling noises	Appliance flowing through the cooling system	Normal Operation
Popping noises	Contraction and expansion of the inside walls due to changes in temperature.	Normal Operation
Vibrating	If the side or back of the appliance is touching a cabinet or wall, some of the normal vibrations may make an audible sound.	To eliminate the noise, make sure that the sides and back do not make any contact with any wall or cabinet.
Your home appliance and smartphone is not connected to the Wi-Fi network.	The password for the Wi-Fi that you are trying to connect to is incorrect.	Find the Wi-Fi network connected to your smartphone and remove it, then register your appliance on LG SmartThinQ
	Mobile data for your smartphone is turned on.	Turn off the Mobile data of your smartphone and register the appliance using the Wi-Fi network.
	The wireless network name (SSID) is set incorrectly.	The wireless network name (SSID) should be a combination of English letters and numbers. (Do not use special characters.)
	The router frequency is not 2.4 GHz.	Only a 2.4 GHz router frequency is supported. Set the wireless router to 2.4 GHz and connect the appliance to the wireless router. To check the router frequency, check with your Internet service provider or the router manufacturer.
	The distance between the appliance and the router is too far.	If the distance between the appliance and the router is too far, the signal may be weak and the connection may not be configured correctly. Move the location of the router so that it is closer to the appliance.

Importers

Country Trade	Name Address
UAE LG Electronics	Gulf GF-Jebel Ali Main Warehouse,	JebelAli Free Zone, P.O. Box : 61445 Dubai,UAE
	Al Yousuf Electronics Al Yousuf Electronics (LLC) PB#25,Al Yousuf Bldg, Al Quoz, Dubai
Bahrain A.J.M.	Kooheji Group B.S.C. © A.J.M. Kooheji Group B.S.C. (C)P.O. Box74, Manama kingdom of Bahrain
Oman Oman Gulf	Enterprises LLC Oman Gulf Enterprises	LLCPO Box : 421, PC 118, Sultanate of Oman.Ruwi : 24793072; Wattayah: 22307000.C.R. No.: 1/33586/3
Qatar Video Home and Electronics CentreWLL		Video Home and ElectronicsCentre WLL PO BO 4668, Doha Qatar
Kuwait AL-Babtain	Electronics CompanyWLL	Al-Babtain ElectronicsCOMPANY WLL Al BabtainP.O Box 599, Safat 13006 Kuwait
Yemen Salem Mohammed Shammakh & Co.		Salem Mohammed Shammakh& CO. PO Box 3372, HodeidahRepublic of Yemen
Saudi United Yousef Mohammed NaghiCo Ltd.		United Yousef Mohammed NaghiCo Ltd.Al Khumra Warehouse King Faisal Street, Khumra, After Naval Base,Near to Weighing Station.Jeddah, Saudi Arabia

Warranty period of Linear Compressor :

Ten (10) years from the date of original retail purchase.

Part only (Consumer will be charged for labor)

Noises associated with normal operation and failure to follow instructions found in the use and care and installation guides or operating the unit in an unsuitable environment will not be covered under this warranty.

For any Suggestion, Opinion & Complaints,

Within UAE please Call 800 54 (LG)

Out side UAE please contact to our local dealer or log

into www.lg.com

LG Customer Information Center

Printed in Korea

Memo

Memo

Memo

Memo