LH-DK6540A - Home Theater LG - Free user manual and instructions

USER MANUAL LH-DK6540A LG

Before connecting up, operating or repairing this product, please read this instruction booklet carefully and completely.

Safety Precautions

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation mark within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the instructions accompanying the product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

WARNING: Do not install this equipment in a confined space such as a book case or similar unit.

CAUTION:

This DVD/CD receiver employs a Laser System.

To ensure proper use of this product, please read this owner's manual carefully and retain it for future reference. Should the unit require maintenance, contact an authorized service location (see service procedure).

Performing controls, adjustments, or carrying out procedures other than those specified herein may result in hazardous radiation exposure.

To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM.

CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus.

About the symbols for instructions

Indicates hazards likely to cause harm to the unit itself or other material damage.

Indicates special operating features of this unit.

Indicates tips and hints for making the task easier.

Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic", and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished works. Copyright 1992-1997 Dolby Laboratories. All rights reserved.

Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942 5,956,674, 5,974,380, 5,978,762 and other worldwide patents issued and pending. "DTS" and "DTS Digital Surround" are registered trademarks of Digital Theater Systems, Inc. Copyright 1996, 2000 Digital Theater Systems, Inc. All rights reserved.

OTES ON COPYRIGHTS:

It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyrighted material without permission.

This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs on a VCR, picture noise will appear.

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

SERIAL NUMBER: The serial number is located on the back of this unit. This number is unique to this unit and not available to others. You should record requested information here and retain this guide as a permanent record of your purchase.

Model No.

Serial No.

Table of Contents

Introduction

Safety Precautions 2

Table of Contents 3

Before Use 4-5

Playable Discs....4

Precautions 5

Notes on Discs 5

About Symbols 5

Front Panel and Display Window 6

Remote Control overview .... 7

Rear Panel....8

Preparation

Connections 9-13

TV Connections 9

Optional Equipment Connections 10

Aerial Connections....11

Speaker System Connection 12

Speaker Positioning....13

Before Operation 14-20

Mini Glossary for Audio Stream & Surround

Mode....14

Sound Mode 14

General Explanation....15

On-Screen Display....15

Initial Settings....16-20

- General Operation....16

- Language 16

- Display 17

- Audio....18

- Lock(Parental Control).... 19

- Others 20

Operation

DVD or Video CD Operation....21-23

Playing a DVD and Video CD....21

General Features....21

- Moving to another TITLE ..... 21

- Moving to another CHAPTER/TRACK ..... 21

- Slow Motion....21

• Still Picture and Frame-by-Frame Playback . 22

- Search....22

- Repeat 22

- Repeat A-B 22

• Time Search 22

- Marker Search....23

Special DVD Features 23

- Title Menu 23

- Disc Menu 23

- Changing the Audio Language....23

- Changing the Audio Channel ..... 23

- Subtitles 23

Audio CD and MP3/WMA Disc 24

Playing an Audio CD and MP3/WMA Disc ..... 24

- Pause 24

- Moving to another Track 24

- Repeat Track/All/Off. 24

- Search....24

JPEG Disc Operation 25

Viewing a JPEG disc 25

• Slide Show 25
• Still Picture 25
• Moving to another file 25
• To rotate picture....25

Programmed Playback 26

Repeat Programmed Tracks....26
Erasing a track from Programme List ..... 26
Erasing the Complete Programme List .....26

DivX Disc Operation 27

Speaker Setup....28

Additional Information 29

Last Condition Memory 29
System Select 29
Video Mode Setting 29
Controlling the TV 29

Operation with Radio 30

Presetting the radio stations....30
Listening to the radio 30

Other Function 31

Sleep Timer Setting 31
Dimmer 31
Mute 31
Using Headphone Jack 31
Selecting input source 31
XTS (Excellent True Sound)....31

KARAOKE Operation 32-36

Karaoke Basic Playback. 32
Karaoke Advanced Playback....32-33
Karaoke MENU Playback 33-43

• SETUP 33
  • MUSIC LIST 34-35
  • RANDOM 36
• CHALLENGE....36

Reference

Language Code List 37
Country Code List....38
Troubleshooting....39-40
Specification 41

Before Use

playable Discs

	DVD video discs(8 cm / 12 cm disc)
	Video CD (VCD)(8 cm / 12 cm disc)
	Audio CD(8 cm / 12 cm disc)

In addition, this unit can play a DVD-RW, DVD+RW, SVCD and CD-R or CD-RW that contains audio titles, MP3, WMA, JPEG or DivX files.

otes

• Depending on the conditions of the recording equipment or the CD-R/RW (or DVD-RW, DVD+RW) disc itself, some CD-R/RW (or DVD-RW, DVD+RW) discs cannot be played on the unit.
• Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc.
• Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal). It may result in malfunctions.

otes on DVDs and Video CDs

Some playback operations of DVDs and Video CDs may be intentionally fixed by software manufacturers. As this unit plays DVDs and Video CDs according to disc content designed by the software manufacturer, some playback features of the unit may not be available or other functions may be added. Make sure to also refer to the instructions supplied with the DVDs and Video CDs. Some DVDs made for business purposes may not be able to be played on the unit.

Regional code of the DVD/CD receiver and DVDs

This DVD/CD Receiver is designed and manufactured for playback of region "2" encoded DVD software. The region code on the labels of some DVDs indicates which type of player can play those discs. This unit can only play DVDs labeled "2" or "ALL". If you try to play any other discs, the message "Check Regional Code" will appear on the TV screen.

Some DVDs that have no region code label may still be subject to area restrictions and therefore not playable.

ote on DTS-encoded CDs

When playing DTS-encoded CDs, excessive audio level may be heard from the analog stereo output. To avoid possible damage to the audio system, turn down the volume before playing back such discs, adjust the volume gradually, and keep the volume level low. To enjoy DTS Digital Surround™ playback, an external 5.1 channel DTS Digital Surround™ decoder system must be connected to the digital output of the unit.

Disc-related terms

Title (DVD only)

The main film content or accompanying feature content or additional feature content, or music album. Each title is assigned a title reference number enabling you to locate it easily.

Chapter (DVD only)

Sections of a picture or a musical piece that are smaller than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number, enabling you to locate the chapter you want. Depending on the disc, chapters may not be recorded.

Track (Video CD and audio CD only)

Sections of a picture or a musical piece on a video CD or an audio CD. Each track is assigned a track number, enabling you to locate the track you want.

Scene

On a video CD with PBC (Playback control) functions, moving pictures and still pictures are divided into sections called "Scenes". Each scene is displayed in the menu screen and assigned a scene number, enabling you to locate the scene you want.

A scene is composed of one or several tracks.

Types of video CDs

There are two types of video CDs:

Video CDs equipped with PBC (Version 2.0)

PBC (Playback control) functions allow you to interact with the system via menus, search functions, or other typical computer-like operations. Moreover, still pictures of high resolution can be played if they are included in the disc.

Video CDs not equipped with PBC (Version 1.1)

Operated in the same way as audio CDs, these discs allow playback of video pictures as well as sound, but they are not equipped with PBC.

Before Use (Continued)

Precautions

Handling the unit

When shipping the unit

The original shipping carton and packing materials may come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory.

When setting up the unit

The picture and sound of a nearby TV, VCR, or radio may be disturbed during playback. In this case, position the unit away from the TV, VCR, or radio, or turn off the unit after removing the disc.

To keep the exterior surfaces clean

Do not use volatile liquids, such as insecticide spray, near the unit. Do not leave rubber or plastic products in contact with the unit for a long period of time. They will leave marks on the surface.

Cleaning the unit

To clean the cabinet

Use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution. Do not use strong solvents such as alcohol, benzene, or thinner, as these might damage the surface of the unit.

To obtain a clear picture

The DVD/CD Receiver is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality will be poor.

Regular inspection and maintenance are recommended after every 1,000 hours of use. (This depends on the operating environment.)

For details, please contact your nearest dealer.

Notes on Discs

Disc Handling

Do not touch the playback side of the disc.

Hold the disc by the edges so that fingerprints will not get on the surface.

Do not stick paper or tape on the disc.

Storing discs

After playing, store the disc in its case.

Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exposed to direct sunlight, as there may be a considerable temperature increase inside the car.

Cleaning discs

Fingerprints and dust on the disc can distort the picture or reduce sound quality. Before playing, clean the disc with a clean cloth. Wipe the disc from the centre outwards.

Diagram showing two hands holding a circular object with arrows indicating direction, labeled with 'O' and an '×' symbol.

Do not use strong solvents such as alcohol, benzene, thinner, commercially available cleaners, or anti-static spray intended for vinyl records.

About Symbols

About the 🔊 symbol display

“💡” may appear on the TV screen during operation. This icon means the function explained in this owner's manual is not available on that specific DVD video disc.

About the disc symbols for instructions

A section whose title has one of the following symbol is applicable only to the disc represented by the symbol.

DVD DVD Video discs

VCD2.0 Video CDs with the PBC (playback control) function.

VCD1.1 Video CDs without the PBC (playback control) function.

CD Audio CDs.

MP3 MP3 disc.

WMA WMA disc.

JPEG JPEG disc.

DivX DivX disc.

Front Panel and Display Window

STANDBY indicator Lights red when the receiver is in Standby mode (off). STANDBY/ON DISC Tray OPEN/CLOSE button PLAY button MONO/STEREO/PAUSE/STEP button STOP button TUNING(-/+)/SKIP(-/+) KEY CONTROL(b)/(#) buttons FUNCTION button Press repeatedly to select other function. Remote sensor DISPLAY Window MIC 1/MIC 2 Connect a microphone to MIC 1 or MIC 2 or to both sockets. VOLUME controller PHONES connector

Indicates current surround mode Indicates current audio stream SLEEP indicator Programmed playback active MUTE indicator Indicates current player function: Playback, Pause, etc. Repeat playback mode indicators TUNED indicator STEREO indicator SPEED TITLE REPEAT ALL ACDB PROGRAM TUNED ST. CHP/TRK MHz kHz Speaker indicators XTS indicator Indicates current chapter or track number Indicates current title number Total playing time/Elapsed time/XTS/ XCLASS/Frequency/Sleep time/ Surround mode/Volume etc. indicators Indicates current disc type

Remote Control Overview

POWER Switches System ON and OFF. DVD/KARAOKE Select the output source (CD/DVD) or accesses or removes KARAOKE. BAND Select the System's tuner (FM and AM bands) 0-9 numerical buttons Select a service, programme number directly or select numbered options in a menu. XTS To enjoy great sound effect. AUDIO Selects an audio language (DVD) or an audio channel (CD). MALE To sing a song of MAN's. SETUP Accesses or removes setup menu . MENU Accesses menu on a DVD disc. TEMPO(-/+) To play fast or slow. (LG karaoke disc only) SCAN(◀◀/▶▶) Search backward or forward. SLOW-/+(<1/▶) Reverse/ Forward slow playback. b - KEY CON. - # Adjust a vocal range.(LG karaoke disc only) REVERSE SKIP(◀◀) Search backward*/go to beginning of current chapter or track or go to previ- ous chapter or track. FORWARD SKIP(▶▶) Search forward*/go to next chapter or track. PROG. Accesses or removes Program menu. MEMO. Enter a radio stations frequency into the tuner. CLEAR Removes a track number on the program menu or a mark on the MARKER SEARCH menu. REPEAT Repeat chapter, track, title, all. REPEAT A-B Repeats sequence. ECHO VOL.(▼/▲) Adjusts echo volume. OPEN/CLOSE (▲) Opens and closes the disc tray. AUX Selects input source. TV To control the TV. (LG TV only) D INPUT To select a Digital input source. SUBTITLE Selects a subtitle language (DVD). SHADOW To highlight the song's subtitle. RETURN Removes the setup menu. SOUND MODE Selects sound mode. FEMALE To sing a song of WOMEN's. DISPLAY Accesses On-Screen display. INPUT Selects the TV's source. ◀/▶/▲/▼ (left/right/up/down) Selects an option in the menu. ENTER Acknowledges menu selection. PR/CH(+/-) (▲/▼): Select programme of TV or Radio. TUN(-/+) (◀/▶): To tune in the desired radio station. TITLE Displays the disc's Title menu, if available. VOLUME (+/-) To adjust speaker volume and TV volume. STOP (■) Stops playback. PAUSE/STEP (■) Pause playback PLAY (▶) Starts playback. MUTE Mute the speakers. MARKER Marks a point during playback. SEARCH Displays MARKER SEARCH menu. SLEEP Set the System to turn off automatically ly at a specified time. DIMMER Press to change brightness of the display window on the front panel dur- ing in power-on status. MIC VOL.(▼/▲) Adjusts microphone volume.

Remote Control Operation Range

Point the remote control at the remote sensor and press the buttons.

● Distance: About 23 ft (7 m) from the front of the remote sensor
● Angle: About 30° in each direction in front of the remote sensor

Caution

Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.).

Remote control battery installation

Remove the battery cover on the rear of the remote control, and insert two R03 (size AAA) batteries with + and - aligned correctly.

Rear Panel

POWER CORD SPEAKER Connectors AV2 AUDIO Input (L/R)/VIDEO IN Connectors AV1 AUDIO Input (L/R)/VIDEO IN Connectors FRONT NEAR W/OR CENTER NEAR FRONT R R NODDER L (BΩ) (BΩ) (AΩ) (BΩ) (BΩ) (BΩ) OPTICAL S-VIDEO OUT MONITOR OUT CONNECTOR COMPONENT VIDEO OUT Terminals Connect to a TV with Y Pb Pr inputs. L AUDIO R FM rh AM ANTENIA OPTICAL IN Connector S-VIDEO OUT Connector MONITOR OUT Connector FM Antenna Connector AM Loop Antenna Connectors

Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit.

Connections

TV Connections

- Make one of the following connections, depending on the capabilities of your existing equipment.

Tips

- Depending on your TV and other equipment you wish to connect, there are various ways you could connect the DVD/CD Receiver. Use one of the connections described below. - Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections.

Caution

- Make sure the DVD/CD Receiver is connected directly to the TV. Select the correct AV input on your TV. - Do not connect your DVD/CD Receiver to TV via your VCR. The DVD image could be distorted by the copy protection system.

S-Video connection

Connect the S-VIDEO OUT jack on the DVD/CD Receiver to the S-VIDEO IN jack on the TV using the S-Video cable (S).

Video connection

Connect the MONITOR OUT jack from the DVD/CD Receiver to the VIDEO IN jack on the TV using the video cable supplied (V).

Component Video (Color Stream®) connection

Connect the COMPONENT VIDEO OUT jacks from the DVD/CD Receiver to the corresponding in jacks on the TV using an Y Pb Pr cable (C).

Progressive Scan (ColorStream® pro) connection

- If your television is a high-definition or "digital ready" television, you may take advantage of the DVD/CD Receiver's progressive scan output for the highest video resolution possible. - If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try Progressive Scan on the DVD/CD Receiver.

Connect the COMPONENT VIDEO OUT jacks from the DVD/CD Receiver to the corresponding in jacks on the TV using an optional Y Pb Pr cable (C).

Note

- Set the Progressive to "On" on the Setup menu for progressive signal, see page 17.

Rear of TV S-VIDEO INPUT VIDEO INPUT COMPONENT VIDEO / PROGRESSIVE SCAN INPUT V P0 P1 S V C 8-VIDEO OUT MONITOR OUT COMPONENT WIP OUT AV 3 IN AV 1 IN L AUDIO R

Rear of DVD/CD Receiver

Connections (Continued)

Optional Equipment Connections

1

Connect a VCR to the AV1 connectors.

2

Connect a additional VCR to the AV2 connectors.

3

Connect an optical output of DVD Player (or Digital Device etc) to the OPTICAL IN connector.

graph TD
    A["Additional VCR"] -->|To AUDIO OUT (L/R)/VIDEO OUT| B["VCR"]
    B -->|To AUDIO OUT (L/R)/VIDEO OUT| C["DVd Player (or Digital Device, etc)"]
    C --> D["Optical OUT"]
    D --> E["Antenna"]
    E --> F["Ground"]
    G["POINT R0 800 800 800 800"] --> H["OPTICAL IN"]
    I["AV2"] --> J["AV1"]
    K["AV2"] --> L["AV1"]
    M["AV2"] --> N["AV1"]
    O["AV2"] --> P["AV1"]
    Q["AV2"] --> R["AV1"]
    S["AV2"] --> T["AV1"]
    U["AV2"] --> V["AV1"]
    W["AV2"] --> X["AV1"]
    Y["AV2"] --> Z["AV1"]

N

ote

- If the audio format of the digital output does not match the capabilities of your DVD/CD Receiver, the receiver will produce a strong, distorted sound or no sound at all.

Connections

Aerial Connections

Connect the supplied FM/AM aerial for listening to the radio.

• Connect the AM Loop aerial to the AM aerial connector.
• Connect the FM Wire aerial to the FM aerial connector.

graph TD
    A["AM Loop aerial (supplied)"] --> B["FM Wire aerial (supplied)"]
    B --> C["Antenna"]
    C --> D["FM"]
    D --> E["Ground"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333
    style D fill:#fcc,stroke:#333

otes

● To prevent noise pickup, keep the AM Loop aerial away from the DVD/CD Receiver and other components.
- Be sure to fully extend the FM wire aerial.
- After connecting the FM Wire aerial, keep it as horizontal as possible.

Connections (Continued)

Speaker System Connection

Connect the speakers using the supplied speaker cords.

To obtain the best possible surround sound, adjust the speaker parameters (volume, distance, etc.).

graph TD
    A["Front speaker (Right)"] --> B["Center speaker"]
    C["Front speaker (Left)"] --> B
    D["Rear speaker (Right surround)"] --> E["Subwoofer"]
    F["Rear speaker (Left surround)"] --> E
    B --> G["Speaker Set"]
    G --> H["6 VIDEO OUT"]
    G --> I["MONITOR OUT"]
    G --> J["TRANSPORT VIDEO OUT"]
    G --> K["AV 2. IN"]
    G --> L["EU 1 IN"]
    H --> M["VIDEO"]
    I --> N["Pv"]
    J --> O["PN"]
    K --> P["Y"]
    L --> Q["L AUDIO R"]

otes

• Be sure to match the speaker cable to the appropriate terminal on the components: + to + and - to -. If the cables are reversed, the sound will be distorted and will lack base.
• If you use front speakers with low maximum input rating, adjust the volume carefully to avoid excessive output on the speakers.
• Do not remove the front cover of supplied speaker.

Connections (Continued)

Speaker Positioning

In the case of normal position use the 6 speakers (2 front speakers, centre speaker, 2 rear speakers and subwoofer).

If you want to play the excellent bass sound, DTS digital surround or Dolby Digital surround, you should connect a subwoofer.

- Front speakers

According to your listening position set up the speakers for equal distance. And by hearing position set up the interval between speakers to 45 degree.

- Centre speaker

The centre speakers and front speakers are ideally the same height. But normally place it above or below the television.

- Rear speakers

Place left and right behind the listening area. These speakers recreate sound motion and atmosphere required for surround sound playback. For best results, do not install the rear speakers too far behind the listening position and install them at or above the level of the listener's ears. It is also effective to direct the rear speakers towards a wall or ceiling to further disperse the sound.

In the case of a smaller room size, if the audience is near to the rear wall set the rear speakers opposite each other, and set the rear speakers above 60 - 90 cm than the listener's ears.

- Subwoofer

This can be placed in any front position.

Subwoofer Centre Speaker Front Speaker (Left) Front Speaker (Right) Rear Speaker (Left) Rear Speaker (Right)

Speaker Positioning Example

Before Operation

Mini Glossary for Audio Stream & Surround mode

dts

Allows you to enjoy 5.1(or 6) discrete channels of high quality digital audio from DTS program sources such as discs, DVD and compact discs, etc.bearing the trademark. DTS Digital Surround delivers up to 6 channels of transparent audio(which means identical to the original masters) and results in exceptional clarity throughout a true 360 degree sound field. The term DTS is a trademark of DTS Technology, LLC. Manufactured under license from DTS Technology, LLC.

DIGITAL

The Dolby Digital surround format lets you enjoy up to 5.1 channels of digital surround sound from a Dolby Digital program source. If you play DVDs with “ ” mark, you can enjoy even better sound quality, greater spatial accuracy, and improved dynamic range.

□□PRO LOGIC (II)

Dolby Pro Logic II creates five full-bandwidth output channels from two-channel sources. This is done using an advanced, high-purity matrix surround decoder that extracts the spatial properties of the original recording without adding any new sounds or tonal colorations.

MOVIE mode:

The Movie mode is for use with stereo television shows and all programs encoded in Dolby Surround. The result is enhanced soundfield directionality that approaches the quality of discrete 5.1-channel sound.

BYPASS

Software with multichannel surround audio signals is played according to the way it was recorded.

Sound Mode DVD VCD2.0 VCD1.1 CD

You can enjoy surround sound simply by selecting one of the pre-programmed sound fields according to the program you want to listen to.

When DVD is inserted

You can change the Digital Audio Output mode by pressing the AUDIO button on the remote control during playback. Although the DVD contents differ from disc to disc, the following explains the basic operation when this feature is used.

a) After you select 2 channel (For example or ) by pressing AUDIO button, press SOUND button repeatedly.

b) After you select 5.1 channel (For example 2.1.0.0 or 2.1.0.0) by pressing AUDIO button, press SOUND button.

- “” indicator will be displayed on the TV screen.

- "BYPASS" indicator will be only displayed on the display window.

When Video CD is inserted

Each time you press SOUND button, the sound mode of Video CD is changed on the display window in the following order.

BYPASS → STUDIO → CLUB → HALL → THEATER 1 → CHURCH → PL II MOVIE → BYPASS...

After you select the "Bypass" of sound mode by pressing SOUND button, press AUDIO button. The Left, Right and Stereo of audio channel will be displayed on the TV screen.

When CD is inserted

Each time you press SOUND button, the sound mode of Audio CD is changed on the display window in the following order.

BYPASS → STUDIO → CLUB → HALL → THEATER 1 → CHURCH → PL II MOVIE → BYPASS...

For your reference

• You can identify the encoding format of program software by looking at its packaging.
• Dolby Digital discs are labeled with the logo.
• Dolby Surround encoded programs are labeled with the ☐DOLBY logo.
• DTS Digital Surround discs are marked with DTS.

• When you play sound tracks with 96kHz sampling frequency, the output signals will be converted to 48kHz (sampling frequency).
• When you use a microphone except Karaoke function, you can't enjoy 5.1 channel output. Only 2 channel sound will out by the influence of the microphone system.

DVD Operation Setup

Caution:

Before using the remote control, press the DVD/KARAOKE button to select the device to be operated.

General Explanation

This manual gives basic instructions for operating the DVD/CD Receiver. Some DVDs require specific operation or allow only limited operation during playback. When this occurs, the symbol 🔒 appears on the TV screen, indicating that the operation is not permitted by the DVD/CD Receiver or is not available on the disc.

On-Screen Display

General playback status can be displayed on the TV screen. Some items can be changed on the menu.

On-screen display operation

Press DISP. during playback.

Press ▲/▼ to select an item.

The selected item will be highlighted.

Press ◀ or ▶ to change the setting of an item.

The number buttons can be also be used for setting numbers (e.g., title number). For some functions, press ENTER to execute the setting.

Temporary Feedback Field Icons

Repeat title

Repeat sequence

Resume play from this point

Action prohibited or not available

otes

• Some discs may not provide all of the features on the on-screen display example shown below.
• If no button is pressed for 10 seconds, the on-screen display disappears.

Example: On-Screen Display during playing DVD

Items			Function / Action using ▲ / ▼ to select item	Selection Method
Title Number		1/3▶	Shows the current title number and total number of titles / skips to the desired title number.	◀ / ▶, Numbers, or ENTER
Chapter Number		1/12▶	Shows the current chapter number and total number of chapters / skips to the desired chapter number.	◀ / ▶, Numbers, or ENTER
Time search		0:20:09	Shows the elapsed playing time / searches by elapsed time.	Numbers, ENTER
Audio language and Digital Audio Output mode		1 ENG DOD ▶ 5.1 CH	Shows the current audio soundtrack language, encoding method, and channel number / changes the setting.	◀ / ▶ or AUDIO
Subtitle language		1 ENG ▶	Shows the current subtitle language / changes the setting.	◀ / ▶ or SUBTITLE
Angle		1/3 ▶	Shows the current angle number and total number of angles / changes the angle.	◀ / ▶
Sound		Bypass ▶	Shows the current sound mode / changes the setting.	◀ / ▶ or SOUND

Example: On-Screen Display during playing VCD

Items			Function / Action using ▲ / ▼ to select item	Selection Method
Track Number		1/3▶	Shows the current track number, total number of tracks and PBC On mode / skips to the desired track number.	◀/▶, Numbers, or ENTER
Time		0:20:09	Shows the elapsed playing time (display only).	-
Audio Channel		Stereo ▶	Shows the audio channel / changes the audio channel.	◀/▶or AUDIO
Sound		Bypass ▶	Shows the current sound mode / changes the setting.	◀/▶or SOUND

DVD Operation Setup (Continued)

Initial Settings

By using the Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 16 to 20.

To display and exit the Menu:

Press SET UP to display the menu. A second press of SET UP will take you back to initial screen.

To go to the next level:

Press ▶ on the remote control.

To go back to the previous level:

Press ◀ on the remote control.

General Operation

Press SET UP.

The setup menu appears.

Use ▲ / ▼ to select the desired option then press ▶ to move to the second level.

The screen will be shown the current setting for the selected item, as well as alternate setting(s).

Use ▲ / ▼ to select the second desired option then press ▶ to move to the third level.

Use ▲/▼ to select the desired setting then press ENTER to confirm your selection.

Some items require additional steps.

Press SET UP or PLAY to exit the setup menu.

LANGUAGE

LANGUAGE OISO Dlar Austin Dlar Subtile Dlar Blends English Original OFF Original Move Select

OSD

Select a language for the Setup menu and on-screen display.

Disc Audio / Subtitle / Menu DVD

Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu.

Original: Refers to the original language in which the disc was recorded.

Other: To select another language, press number buttons to enter the corresponding 4-digit number according to the language code list on page 37. If you enter the wrong language code, press CLEAR on the remote control.

DVD Operation Setup (Continued)

DISPLAY

DISPLAY TV Aspect > 16 : 0 Display Mode > Wireless Progressive Scale > Off Show > Select

TV Aspect DVD

4:3: Select when a standard 4:3 TV is connected. 16:9: Select when a 16:9 wide TV is connected.

Display Mode DVD

Display Mode setting works only when the TV Aspect mode is set to "4:3".

Letterbox: Displays a wide picture with bands on the upper and lower portions of the screen.

Panscan: Automatically displays the wide picture on the entire screen and cuts off the portions that do not fit.

Progressive Scan DVD

Progressive Scan Video provides the highest quality pictures with less flickering. If you are using the Component Video jacks for connection to a TV or monitor that is compatible with a progressive scan signal, set Progressive Scan to On.

To Turn ON progressive scan:

Connect component out of the DVD to the input of your monitor/television, set your television or monitor to Component Input.

1. Select "Progressive Scan" on the DISPLAY menu then press ▶.
2. Select "On" using the ▲ / ▼ buttons.
3. Press ENTER to confirm your selection. The confirm menu will appear.

DISPLAY For August Display Mode Progressive Start OK Cancel

1. When the confirm menu appears on your screen Cancel is highlighted as default. Use the ◀ / ▶ buttons to highlight Enter.
2. Pressing ENTER will set the DVD/CD Receiver to Progressive scan mode.

Caution

Once the setting for progressive scan output is entered, an image will only be visible on a progressive scan compatible TV or monitor. If you set Progressive Scan to On in error, you must reset the unit.

1) Remove any disc from the unit and close the disc tray. See that "NO DISC" is displayed on the display window
2) Press and hold STOP (■) for five seconds then release it. The video output will be restored to the standard setting, and a picture will once again be visible on a conventional analog TV or monitor.

DVD Operation Setup (Continued)

AUDIO

Each DVD disc has a variety of audio output options. Set the DVD/CD Receiver's AUDIO options according to the type of audio system you use.

AUDIO 8.1 Speaker Setup ▶ Select DWG ▶ On Vocal ▶ On Move ▶ Select

5.1 Speaker Setup DVD

Select speaker settings, including volume balance and distance, or test the speaker settings.

Speaker settings are only active on the Analog Multi-Channel Output.

Speaker Setup

Make the following settings for the built-in 5.1 channel surround decoder.

AUDIO Operator Print L Size Large Volume 0 off Sound 0 ns Total Off H: Save Move Apply Enter

1. Press SET UP. The setup menu appears.
2. Use ▲ / ▼ to select the AUDIO option then press ▶ to move to the second level.
3. Use ▲ / ▼ to select the Speaker Setup option then press ▶ to move to the third level. "Select" is highlighted.
4. Press ENTER and 5.1 Speaker Setup menu appears.
5. Use ◀ / ▶ to select the desired speaker.
6. Adjust options using ▲ / ▼ / ◀ / ▶ buttons.
7. Press ENTER to confirm your selection. Returns to the previous menu.

Speaker selection

Select a speaker that you want to adjust. [Front speaker (Front L), Center Speaker, Front speaker (Front R), (Center), Rear speaker (Rear R), Rear speaker (Rear L) or Subwoofer (Woofer)]

Size

Since the speaker settings are fixed, you cannot change the setting.

Volume

Press ◀/▶ to adjust the output level of the selected speaker. (-5dB \~ 5dB)

Distance

If you have connected speakers to your DVD/CD Receiver, setting the Distance lets the speakers know how far the sound has to travel to reach your set listening point.

This allows the sound from each speaker to reach the listener at the same time.

Press ◀ / ▶ to adjust the Distance of the selected speaker.

ote

You can adjust the Distance of Center speaker and Rear speakers (Left & Right) only.

Test

Select "All" to test the signals of each speaker. Adjust the volume to match the volume of test signals memorized in the system.

Front L → Center → Front R → Rear R → Rear L → Woofer

Dynamic Range Control (DRC)

With the DVD format, you can hear a program's sound-track in the most accurate and realistic presentation possible, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). Then, you may listen to a movie at a lower volume without losing dialog intelligibility. Set DRC to On for this effect.

otes

• The DRC function works only during playback of Dolby Digital recorded discs.
• The level of Dynamic Range Compression may differ depending on the DVD disc.

Vocal

Set Vocal to On only when a multi-channel Karaoke DVD is playing. The karaoke channels on the disc will mix into a normal stereo sound.

DVD Operation Setup (Continued)

LOCK (Parental Control)

LOCK Setting > Select Password > *** Country Code > S A None > Select

Rating DVD

Some movies contain scenes that may not be suitable for children to view. Many of these discs contain parental control information that applies to the complete disc or to certain scenes on the disc. Movies and scenes are rated from 1 to 8, depending on the country. Some discs offer more suitable scenes as an alternative.

The parental control feature allows you to block access to scenes below the rating you input, thereby preventing your children from being able to view material you believe is unsuitable.

1 Select "Rating" on the LOCK menu then press ▶.
2 To access the Rating, Password and Country Code features, you must input the 4-digit security code you created.

If you have not yet entered a security code you are prompted to do so.

Input a 4-digit code and press ENTER. Enter it again and press ENTER to verify. If you make a mistake before pressing ENTER, press CLEAR.

3 Select a rating from 1 to 8 using the ▲/▼ buttons.

Rating 1-8: Rating one (1) has the most restrictions and rating eight (8) is the least restrictive.

Unlock

If you select unlock, parental control is not active and the disc plays in full.

Note

If you set a rating for the DVD/CD Receiver, all disc scenes with the same rating or lower are played. Higher rated scenes are not played unless an alternate scene is available on the disc. The alternative must have the same rating or a lower one. If no suitable alternative is found, playback stops. You must enter the 4-digit password or change the rating level in order to play the disc.

4 Press ENTER to confirm your rating selection, then press SET UP to exit the menu.

Password (Security Code)

You can enter or change password.

1 Select Password on the LOCK menu then press ▶.
2 Follow step 2 as shown left (Rating). "Change" or "New" is highlighted.
3 Enter the new 4-digit code, then press ENTER. Input it again to verify.
4 Press SET UP to exit the menu.

If you forget your Security Code

If you forget your security code you can clear it using the following steps:

1 Input the 6-digit number "210499" on the setup menu and the security code is cleared.
2 Enter a new code as described above.

Note

When "INPUT PASSNO 1" appears on the TV screen, press STOP (■) and then press SET UP to move to the setup menu.

Country Code DVD

Enter the code of the country/area whose standards were used to rate the DVD video disc, based on the list in the reference chapter.

1 Select "Country Code" on the LOCK menu then press ▶.

2 Follow step 2 as shown left (Rating).

3 Select the first character using ▲ / ▼ buttons.

4 Shift the cursor using ▶ button and select the second character using ▲/▼ buttons.

5 Press ENTER to confirm your country code selection.

DVD Operation Setup (Continued)

OTHERS

OTHERS PiC On DiviFiC Registration Select

PBC VCD

Set Playback Control (PBC) to On or Off.

On: Video CDs with PBC are played according to the PBC.

Off:Video CDs with PBC are played the same way as Audio CDs.

DivX(R) Registration DivX

You can show the DivX DRM (Digital Right Management) Registration code for your unit only.

Your registration code is : XXXXXXXX Please use this code to register this player with the DivX(R) Video On Demand service. This will allow you to rent and purchase videos using the DivX(R) Video On Demand format. To learn more go to www.divx.com/void

The Registration code is used for VOD (Video-On-Demand) service agent. You can purchase or rental an encrypt movie file.

Notes

If you rent the DivX VOD file, it has several options of viewing limits as show below.

- Display the number which you can watch the file.

This rental video has 7 views left. A view ends when you stop playback, play a different video or turn off your player. Do you want to use one of your 7 views now Yes No

• The rental has been expired.

- Display the authorization error.

DVD or Video CD Operation

Playing a DVD and Video CD

Playback Setup DVD VCD2.0 VCD1.1

• Turn on the TV and select the video input source connected to the DVD/CD Receiver.
• Audio system: Turn on the audio system and select the input source connected to the DVD/CD Receiver.

Press OPEN/CLOSE (▲) to open the disc tray.

Load your chosen disc in the tray, with the label facing up.

When a double-sided DVD is inserted, make sure the side you want to play is facing down.

Press OPEN/CLOSE (▲) to close the tray.

READING appears on the TV screen, and playback starts automatically. If playback does not start, press PLAY. In some cases, the disc menu might appear instead.

If a menu screen is displayed

The menu screen may be displayed first after loading a DVD or Video CD which contains a menu.

DVD

Use the ◀▶ ▲▼ buttons to select the title/chapter you want to view, then press ENTER to start playback. Press TITLE or MENU to return to the menu screen.

VCD2.0

• Use the number buttons to select the track you want to view.
  Press RETURN to return to the menu screen.
• Menu setting and the exact operating procedures for using the menu may differ depending on the disc. Follow the instructions on the each menu screen. You also may set PBC to Off under setup. See page 20.

otes

• If Parental Control is set and the disc is not within the Rating settings (not authorized), the 4-digit code must be entered and/or the disc must be authorized (see "Parental Control", on page 19).
  • DVDs may have a region code.
• Your receiver will not play discs that have a region code different from your receiver. The region code for this player is 2 (two).
• To watch a DVD during timer recording standby mode, press POWER and DVD to switch to DVD mode.

General Features

ote

Unless stated otherwise, all operations described use the remote control. Some features may also be available on the Setup menu.

Moving to another TITLE DVD

When a disc has more than one title, you can move to another title as follows:

- Press DISP., then press the appropriate numbered button (0-9) to select a title number.

Moving to another CHAPTER/TRACK

DVD VCD2.0

When a title on a disc has more than one chapter or a disc has more than one track, you can move to another chapter/track as follows:

• Press I◀◀ or ▶▶I briefly during playback to select the next chapter/track or to return to the beginning of the current chapter/track.
• Press I◄◄ twice briefly to step back to the previous chapter/track.
• To go directly to any chapter during DVD playback, press DISP. Then, press ▲▼ to select the chapter/track icon. Then, enter the chapter/track number using the numbered buttons (0-9).

ote

For two-digit numbers, press the numbered buttons (0-9) in rapid succession.

Slow Motion DVD VCD2.0 VCD1.1

1 Press SLOW -/+ during pause. The player will enter SLOW mode.
2 Use the SLOW -/+ to select the required speed: ◀ 1/16, ◀ 1/8, ◀ 1/4 or ◀ 1/2 (backward), or ▶ 1/16, ▶ 1/8, ▶ 1/4 or ▶ 1/2 (forward).
3 To exit slow motion mode, press PLAY.

ote

Slow motion playback in reverse is not applicable for Video CD.

DVD or Video CD Operation (Continued)

General Features (continued)

Still Picture and Frame-by-frame playback

DVD VCD2.0 VCD1.1

1 Press PAUSE/STEP during playback. The DVD/CD Receiver will now go into PAUSE mode.
2 You can advance the picture frame-by-frame by pressing PAUSE/STEP repeatedly on the remote control.

Search DVD VCD2.0 VCD1.1

1 Press ◀◀ or ▶▶ during playback. The DVD/CD Receiver will now go into SEARCH mode.
2 Press ◀◀ or ▶▶ repeatedly to select the required speed: ◀◀X2, ◀◀X4, ◀◀X8, ◀◀X16, ◀◀X100 (backward) or ▶▶X2, ▶▶X4, ▶▶X8, ▶▶X16, ▶▶X100 (forward).
With a Video CD, the Search speed changes: ◀◀X2, ◀◀X4, ◀◀X8, ◀◀X16 (backward) or ▶▶X2, ▶▶X4, ▶▶X8, ▶▶X16 (forward).

3 To exit SEARCH mode, press PLAY.

Repeat DVD VCD2.0 VCD1.1

DVD Video Discs - Repeat Chapter/Title/Off

1 To repeat the currently playing chapter, press REPEAT. The Repeat Chapter icon appears on the TV screen
2 To repeat the title currently playing, press REPEAT a second time. The Repeat Title icon appears on the TV screen.
3 To exit Repeat mode, press REPEAT a third time. The Repeat Off icon appears on the TV screen.

Video CDs - Repeat Track/All/Off

1 To repeat the track currently playing, press REPEAT. The Repeat Track icon appears on the TV screen.
2 To repeat the disc currently playing, press REPEAT a second time. The Repeat All icon appears on the TV screen.
3 To exit Repeat mode, press REPEAT a third time. The Repeat Off icon appears on the TV screen.

Repeat A-B DVD VCD2.0 VCD1.1

To repeat a sequence in a title:

1 Press A-B at your chosen starting point. A- appears briefly on the TV screen.
2 Press A-B again at your chosen end point. A-B appears briefly on the TV screen, and the repeat sequence begins.
3 To cancel the sequence, press A-B.

Time Search DVD

The Time Search function allows you to start playing at any chosen time on the disc.

1 Press DISP. during playback. The on-screen display appears on the screen. The Time Search box shows the elapsed playing time of the current disc.
2 Within 10 seconds, press ▲/▼ to select the Time Search icon in the on-screen display. The “-:-:-:-” appears in the Time Search box.

3 Within 10 seconds, use the number buttons to enter the required start time. Enter hours, minutes, and seconds from left to right in the box. If you enter the wrong numbers, press CLEAR to remove the numbers you entered. Then enter the correct numbers.

4 Within 10 seconds, press ENTER to confirm the start time. Playback starts from the selected time on the disc. If you enter an invalid time, playback will continue from the current point.

DVD or Video CD Operation (Continued)

General Features (continued)

Marker Search DVD VCD2.0

You can start playback from a memorized point. Up to nine points can be memorized.

To enter a mark, follow these steps.

1 During disc playback, press MARKER when playback reaches the spot that you want to memorize. The Marker icon will appear on the TV screen briefly.

2 Repeat step 1 to enter up to nine Marker points on a disc.

To Recall a Marked Scene

1 During disc playback, press SEARCH. The MARKER SEARCH menu will appear on the screen.

2 Within 10 seconds, press ◀/▶ to select a Marker number that you want to recall.

3 Press ENTER. Playback will start from the Marked scene.

4 To remove the MARKER SEARCH menu, press SEARCH.

To clear a Marked Scene

1 During disc playback, press SEARCH. The MARKER SEARCH menu will appear on the screen.

2 Press ◀▶ to select the Marker number that you want to erase.

3 Press CLEAR. The Marker number will be erased from the list.

4 Repeat steps 2 and 3 to erase additional Marker numbers.

5 To remove the MARKER SEARCH menu, press SEARCH.

Special DVD Features DVD

Checking the contents of DVD Video discs: Menus

DVDs may contain menus that allow you to access special features. To use the disc menu, press MENU. Then, press the appropriate number button to select an option. Or, use the ◀/▶/▲/▼ buttons to highlight your selection, then press ENTER.

Title Menu DVD

1 Press TITLE. If the current title has a menu, the menu will appear on the screen. Otherwise, the disc menu may appear.

2 The menu can list camera angles, spoken language and subtitle options, and chapters for the title.

Disc Menu DVD

Press MENU. The disc menu is displayed.

Changing the Audio Language DVD

Press AUDIO repeatedly during playback to hear a different audio language or audio track.

Changing the Audio Channel VCD2.0 VCD1.1

Press AUDIO repeatedly during playback to hear a different audio channel (STER., LEFT or RIGHT).

If 🔔 appears, the feature is not available on the disc.

Subtitles DVD

Press S-TITLE repeatedly during playback to see the different subtitle languages.

• The subtitle file of the DivX file is displayed only smi, srt and sub.
• If there is no information or there is a code that can not read in the DivX file, "1/1" etc are displayed.

Audio CD or MP3/WMA Disc Operation

Playing an Audio CD and MP3/WMA

Disc CD MP3 WMA

The DVD/CD Receiver can play MP3/WMA formatted recordings on CD-ROM, CD-R, or CD-RW discs.

Audio CD

Once you insert an audio CD a menu appears on the TV screen. Press ▲ / ▼ to select a track then press PLAY or ENTER and playback starts.

Audio (D) Line Fbox1 Fbox2 Fbox3 Fbox4 Fbox5 Fbox6 Fbox7 Fbox8 Fbox9 Fbox10 Program Box10 Box11 Box12 Box13 Box14 Box15 Box16 Box17 Box18 Box19

MP3 / WMA

1. Press ▲ / ▼ to select a folder, and press ENTER to see the folder contents.
2. Press ▲ / ▼ to select a track then press PLAY or ENTER. Playback starts.

OK Cancel OK Cancel OK Cancel OK Cancel OK Cancel

Notes

• If you are in a file list on the MP3/WMA menu and want to return to the Folder list, use the ▲ / ▼ to highlight 📁. and press ENTER.
• Press MENU to move to the next page.
• On a CD with MP3/WMA file and JPEG file, you can switch MP3/WMA and JPEG menu. Press TITLE and MP3/WMA or JPEG word on top of the menu is highlighted. Then, use ◀ / ▶ to select MP3/WMA or JPEG then press ENTER.

Pause CD MP3 WMA

1 Press PAUSE/STEP during playback.

2 To return to playback, press PLAY or press PAUSE/STEP again.

Moving to another Track CD MP3 WMA

• Press ◀◀◀ or ▶▶◀ briefly during playback to go to the next track or to return to the beginning of the current track.
• Press ◀◀ twice briefly to step back to the previous track.
• In case of audio CD, to go directly to any track, enter the track number using the numbered buttons (0-9) during playback.

Repeat Track/All/Off CD MP3 WMA

You can play a title/chapter/all/track on a disc.

1 Press REPEAT when playing a disc. The repeat icon appears.
2 Press REPEAT to select a desired repeat mode.
- TRACK: repeats the current track
- ALL: repeats all the tracks on a disc.
- Off(No display): does not play repeatedly.

Search CD MP3 WMA

1 Press ◀◀ or ▶▶ during playback. The receiver will now go into SEARCH mode.
2 Press ◀◀ or ▶▶ repeatedly to select the required speed: ◀◀X2, ◀◀X4, ◀◀X8 (backward) or ▶▶X2, ▶▶X4, ▶▶X8 (forward).
3 To exit SEARCH mode, press PLAY.

MP3 / WMA disc compatibility with this player is limited as follows:

• Sampling frequency: within 32 - 48 kHz (MP3), within 24 - 48kHz (WMA)
• Bit rate: within 8 - 320kbps (MP3), 32-192kbps (WMA)
• The DVD/CD Receiver cannot read an MP3/WMA file that has a file extension other than ".mp3" / ".wma".
  • CD-R physical format should be ISO 9660
• If you record MP3 / WMA files using software that cannot create a file system (eg. Direct-CD) it is impossible to playback MP3 / WMA files. We recommend that you use Easy-CD Creator, which creates an ISO 9660 file system.
• File names should have a maximum of 8 letters and must incorporate an .mp3 or .wma extension.
• They should not contain special letters such as / ? * : "< > | etc.
• The total number of files on the disc should be less than 999.

This DVD/CD Receiver requires discs and recordings to meet certain technical standards in order to achieve optimal playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats (including CD-R containing MP3 or WMA files) and these require certain pre-existing conditions (see above) to ensure compatible playback.

Customers should note that permission is required in order to download MP3 / WMA files and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copyright owner.

JPEG Disc Operation

Viewing a JPEG disc

JPEG

This unit can play discs with JPEG files. Before playing JPEG recordings, read the notes on JPEG Recordings on right.

Insert a disc and close the tray.

The JPEG menu appears on the TV screen.

List Preview 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39. 40. 41. 42. 43. 44. 45. 46. 47. 48. 49. 50. 51. 52. 53. 54. 55. 56. 57. 58. 59. 60. 61. 62. 63. 64. 65. 66. 67. 68. 69. 70. 71. 72. 73. 74. 75. 76. 77. 78. 79. 80. 81. 82. 83. 84. 85. 86. 87. 88. 89. 90. 91. 92. 93. 94. 95. 96. 97. 98. 99.

Press ▲ / ▼ to select a folder, and press ENTER.

A list of files in the folder appears. If you are in a file list and want to return to the previous Folder list, use the ▲ / ▼ buttons on the remote to highlight 📄 and press ENTER.

If you want to view a particular file, press ▲/▼ to highlight a file and press ENTER or PLAY.

While viewing a file, you can press STOP to move to the previous menu (JPEG menu).

ips

• There are four Slide Speed options 📄 :

(Slow), >> (Normal), >>> (Fast) and II (off).
Use ▲▼◀▶ to highlight the Speed. Then, use ◀/▶ to select the option you want to use then press ENTER.
- If you set Speed option to Off, Slide is not active.

SLIDE SHOW

JPEG

Use ▲▼◀▶ to highlight the ■ (Slide Show) then press ENTER.

STILL PICTURE

JPEG

1. Press PAUSE/STEP during slide show. The DVD/CD Receiver will now go into PAUSE mode.
2. To return to the slide show, press PLAY or press PAUSE/STEP again.

MOVING TO ANOTHER FILE

JPEG

Press SKIP (I◄◄ or ►►I) once while viewing a picture to advance to the next or previous file.

TO ROTATE PICTURE

JPEG

Press ◀ / ▶ during showing a picture to rotate the picture clockwise or counter clockwise.

JPEG disc compatibility with this player is limited as follows:

• Depending upon the size and number of JPEG files, it could take a long time for the DVD/CD Receiver to read the disc's contents. If you don't see an on-screen display after several minutes, some of the files may be too large — reduce the resolution of the JPEG files to less than 2760 x 2048 pixels and burn another disc.
• The total number of files and folders on the disc should be less than 999.
• Some discs may be incompatible due to a different recording format or the condition of disc.
• Ensure that all the selected files have the ".jpg" extensions when copying into the CD layout.
• If the files have ".jpe" or ".jpeg" extensions, please rename them as ".jpg" file.
• File names without ".jpg" extension will not be able to be read by this DVD/CD Receiver. Even though the files are shown as JPEG image files in Windows Explorer.

Programmed Playback CD MP3 WMA

The program function enables you to store your favorite tracks from any disc in the receiver memory. A program can contain 300 tracks.

1 Insert a disc.

Audio CD and MP3/WMA Discs:

Audio CD or MP3/WMA menu appears as below.

File Project Book1 Book2 Book3 Book4 Book5 Book6 Book7 Book8 Book9 Book10 Book11 Book12 Book13 Book14 Book15 Book16 Book17 Book18 Book19 Book20 Book21 Book22 Book23 Book24 Book25 Book26 Book27 Book28 Book29 Book30 Book31 Book32 Book33 Book34 Book35 Book36 Book37 Book38 Book39 Book40 Book41 Book42 Book43 Book44 Book45 Book46 Book47 Book48 Book49 Book50

Audio CD Menu

File Layer 1 Layer 2 Layer 3 Layer 4 Layer 5 Layer 6 Layer 7 Layer 8 Layer 9 Layer 10 Layer 11 Layer 12 Layer 13 Layer 14 Layer 15 Layer 16 Layer 17 Layer 18 Layer 19 Layer 20 Layer 21 Layer 22 Layer 23 Layer 24 Layer 25 Layer 26 Layer 27 Layer 28 Layer 29 Layer 30 Layer 31 Layer 32 Layer 33 Layer 34 Layer 35 Layer 36 Layer 37 Layer 38 Layer 39 Layer 40 Layer 41 Layer 42 Layer 43 Layer 44 Layer 45 Layer 46 Layer 47 Layer 48 Layer 49 Layer 50 Layer 51 Layer 52 Layer 53 Layer 54 Layer 55 Layer 56 Layer 57 Layer 58 Layer 59 Layer 60 Layer 61 Layer 62 Layer 63 Layer 64 Layer 65 Layer 66 Layer 67 Layer 68 Layer 69 Layer 70 Layer 71 Layer 72 Layer 73 Layer 74 Layer 75 Layer 76 Layer 77 Layer 78 Layer 79 Layer 80

MP3/WMA Menu

2 Select a track on the "List", then press PROGRAM or select "→ (Add)" icon then press ENTER to place the selected track on the "Program" list. Repeat to place additional tracks on the list.

Note

You can add all tracks in the disc. Select "→ (Add All)" icon then press ENTER.

3 Select the track you want to start playing on the "Program" list. Press and hold ▲ / ▼ to move to the next/previous page.

4 Press PLAY or ENTER to start. Playback begins in the order in which you programmed the tracks. Playback stops after all of the tracks on the "Program" list have played once.

5 To resume normal playback from programmed play-back, select a track of AUDIO CD (or MP3/WMA) list and then press PLAY.

REPEAT PROGRAMMED TRACKS

1. Press REPEAT when playing a disc. The repeat icon appears.

2. Press REPEAT to select a desired repeat mode.

3. TRACK: repeats the current track

4. ALL: repeats all the tracks on programmed list.
5. Off(No display): does not play repeatedly.

ERASING A TRACK FROM "PROGRAM" LIST

1. Use ▲▼ to select the track that you wish to erase from the Program list.

2. Press CLEAR. Or, select “☐ (Delete)” icon then press ENTER to place the selected track on the Program list. Repeat to erase additional tracks on the list.

ERASING THE COMPLETE PROGRAM LIST

Use ▲ / ▼ to select “ ^a_a (Del all)”, then press ENTER.

Note

The programs are also cleared when the disc is removed.

DivX Disc Operation

Using this DVD/CD Receiver you can play DivX disc.

1 Insert a disc and close the tray. The DivX menu appears on the TV screen.

0:00:00 1/1.2 DIVX Multi Provider 1 Multi Provider 2 Multi Provider 3 Multi Provider 4 Multi Provider 5 Multi Provider 6 Multi Provider 7 Multi Provider 8

2 Press ▲ / ▼ to select a folder, and press ENTER. A list of files in the folder appears. If you are in a file list and want to return to the Folder list, use the ▲ / ▼ buttons on the remote to highlight 🔒. and press ENTER.

3 If you want to view a particular file, press ▲ / ▼ to highlight a file and press ENTER or PLAY.

4 Press STOP to exit.

Notes

• Be sure to select "SUBTITLE ON" mode before playback a DivX file by pressing ENTER every time.
• When the subtile has more than two languages in the file, original subtile is only available.
• The Pro logic II Sound mode is not available for DivX file.
• Subtitle in Chinese will not be displayed during play a DivX file. (Subtitle in English is available)

DivX disc compatibility with this player is limited as follows:

• Available resolution size of the DivX file is under 720x576 (W x H) pixel.
- The file name of the DivX subtitle is available by 20\~40 characters (different by language).
- If there is impossible code to express in the DivX file, it may be displayed as " _ " mark on the display.
- If the number of the screen frame is over 30 per 1 second, this unit may not operate normally.
- If the video and audio structure of recorded file is not interleaved, either video or audio is outputted.
- If the file is recorded with GMC, the unit supports some of 1-point of the record level.
* GMC?
GMC is the acronym for Global Motion Compensation. It is an encoding tool specified in MPEG4 standard. Some MPEG4 encoders, like DivX or Xvid, have this option. There are different levels of GMC encoding, usually called 1-point, 2-point, or 3-point GMC.

playable DivX file

● ".avi ", ".mpg ", ".mpeg "

playable Codec format

● "DIVX3.xx", "DIVX4.xx", "DIVX5.xx", "XVID", "MP43", "3IVX", "MP42".

playable Audio format

● "AC3", "DTS", "PCM", "MP3", "WMA".
- Sampling frequency: within 32 - 48 kHz (MP3), within 24 - 48kHz (WMA)
- Bit rate: within 32 - 320kbps (MP3), 40 - 192kbps (WMA)

Speaker Setup

Adjust the following settings for the built-in 5.1 channel surround decoder.

1 Press SET UP. The setup menu appears.
2 Use ▲ / ▼ to select the AUDIO option then press ▶ to move to the second level.
3 Use ▲ / ▼ to select the Speaker Setup option then press ▶ to move to the third level. "Select" is highlighted.
4 Press ENTER and 5.1 Speaker Setup menu appears.

AUDIO Speaker Front 1 Size Small Volume 0 dil Distance 2 ms Text Off Select Move Return Enter

5 Use ◀ / ▶ to select the desired speaker.
6 Adjust options using ▲/▼/◄/► buttons.
7 Press ENTER to confirm your selection. Returns to the previous menu.

Speaker

Select a speaker that you want to adjust. (Front speakers (Left), Front speakers (Right), Center Speaker, SubWoofer, Rear speakers (Left), or Rear speakers (Right))

Note

Certain speaker settings are prohibited by the Dolby Digital licensing agreement.

Size

Since the speaker settings are fixed, you cannot change the settings.

Volume

Press ◀ / ▶ to adjust the output level of the selected speaker. (-5dB \~ +5dB)

Distance

If you connected speakers to your DVD/CD Receiver, setting the Distance lets the speakers know how far the sound has to travel to reach your set listening point. This allows the sound from each speaker to reach the listener at the same time.

Press ◀ / ▶ to adjust the Distance of the selected speaker.

Note

You can adjust the Distance of Center speaker and Rear speakers (Left & Right) only.

Test

Press ◀ / ▶ to test the signals of each speaker. Adjust the volume to match the volume of test signals memorized in the system.

Front Left (L) → Center → Front Right (R) → Rear Right (R) → Rear Left (L) → SubWoofer

Additional Information

Last Condition Memory DVD CD VCD1.1

This DVD/CD Receiver memorizes the user settings for the last disc that you have viewed. Settings remain in memory even if you remove the disc from the player or switch off the player. If you load a disc that has its settings memorized, the latest stop position is automatically recalled.

otes

• Settings are stored in memory for use any time.
• This DVD/CD Receiver does not memorize settings of a disc if you switch off the DVD/CD Receiver before commencing to play it.

System Select

You must select the appropriate system mode for your TV system. If NO DISC appears in the display window, press and hold P/STEP on the front panel or remote control for more than 5 seconds to be able to select a system (PAL, NTSC, or AUTO).

- When the selected system does not coincide with the system of your TV, normal colour picture may not be displayed.

AUTO: Select when DVD/CD Receiver is connected with Multi system TV.

NTSC: Select when DVD/CD Receiver is connected with NTSC-TV.

PAL: Select when DVD/CD Receiver is connected with PAL-TV.

Video Mode Setting

• With certain discs, the playback picture may be flickering or Dot Crawl is shown on straight lines. That means Vertical interpolation or De-interlace is not perfectly matched with the disc. In this case, the picture quality may be improved by changing the video mode.
• To change the video mode, press and hold DISP. about 3 seconds during disc playback. The new video mode number selected is displayed on the TV screen. Check whether the video quality has improved. If not, repeat the above procedure until picture quality is improved.
• Video mode change sequence: MODE1 → MODE2 → MODE3 → MODE1
• If you turn off the power, the video mode will be back to initial state (MODE1).

Detailed Descriptions for Video Modes

MODE1: The source material of the DVD video (film material or video material) is determined from disc information.

MODE2: Suitable for playing film based content or video based material recorded by the progressive scan method.

MODE3: Suitable for playing video based content with comparatively little motion.

ote

The video mode setting only works when the Progressive Scan mode is set to "On" in the Setup menu.

Controlling the TV

Your remote control is capable of operating your DVD/CD Receiver as well as limited functions of LG TV. Follow the instructions below to operate for your LG TV.

1 Before using the remote control, press the TV to select the device to be operated. To switch the remote control mode (to operate a different device), be sure to press the TV first.

2 The POWER, CH(▼/▲), VOLUME (+/-), and INPUT buttons on remote control are used to operate the LG TV.

Setting Remote Control Codes for LG TV

- Hold POWER and press PR/CH(+/-) (▼/▲) button repeatedly until the TV on or off.

ote

If the remote control does not operate your particular TV, try the other code or use the remote control originally supplied with the LG TV.

Due to the variety of codes used by manufacturers, OUR COMPANY cannot guarantee that the remote control will operate every model of LG TV.

Operation with Radio

Presetting the radio stations

You can preset 50 stations for FM and AM (MW). Before tuning, make sure that you have turned down the volume.

1 Press BAND on the remote control until FM or AM (MW) appears in the display window.

2 And then every time you press BAND, FM and AM (MW) changes alternately.

3 Press and hold TUNING ◀◀◀◀or ▶▶▶▶ on the front panel for about two seconds until the frequency indication starts to change, then release.

Scanning stops when the DVD/CD Receiver tunes in a station. "TUNED" and "STEREO" (for stereo program) appear in the display window.

Note

"TUNED" only appears when the signal is FM and STEREO.

4 Press MEMO. on the remote control. A preset number will flash in the display window.

5 Press PR(▲/▼) on the remote control to select the preset number you want.

6 Press MEMO. on the remote control again. The station is stored.

7 Repeat steps 3 to 6 to store other stations.

To tune in a station with a weak signal

Press TUNING ◀◀◀◀ or ▶▶▶▶I repeatedly in step 3 to tune in the station manually.

To clear all the stored stations

Press and hold MEMO. for about two seconds and "MEM RESET" is appeared in the display window and then press MEMO. again, the stations are cleared.

- If you have accidentally entered into the "MEM RESET" and you do not wish to clear the memory, do not press any key. After a few seconds, the "MEM RESET" display will go off by itself and change to mode.

Note

If all stations have already been entered, the FULL message will appear in the display window for a moment and then a preset number will flash.

To change the preset number, follow the steps 5-6 as above.

Listening to the radio

Preset radio stations in the DVD/CD Receiver's memory first (see "Presetting radio stations" on the left).

1 Press BAND until AM (MW) or FM appears in the display window. The last received station is tuned in.

2 Press PR(▲▼) repeatedly on the remote control to select the preset station you want. Each time you press the button, the DVD/CD Receiver tunes in one preset station at a time.

3 Adjust the volume by rotating VOLUME on the front panel or by pressing VOLUME + or - on the remote control repeatedly.

To turn off the radio

Press POWER to turn the DVD/CD Receiver off or select another function mode (DVD/CD, AV 1, etc.).

To listen to non-preset radio stations

• Use manual or automatic tuning in step 2.
• For manual tuning, press TUNING ◀◀◀◀ or ▶▶▶▶ on the front panel repeatedly.
• For automatic tuning, press and hold TUNING ◀◀◀◀ or ▶▶▶▶ for about two seconds on the front panel.

To select a preset radio station directly

You can use the number buttons on the remote control to select a preset radio station directly. For example, to listen to preset station 4, press 4 on the remote control. To listen to preset station 19, press 1 then 9 (within 3 seconds).

For your reference

- If an FM program is noisy

Press MONO/ST. on the front panel so that "ST." disappears in the display window. There will be no stereo effect, but the reception will improve. Press the button again to restore the stereo effect.

• To improve reception

Reorient the supplied antennas.

Other Function

Sleep Timer Setting

You can set the DVD/CD Receiver to turn off automatically at a specified time.

1 Press SLEEP to set the desired sleep time. The SLEEP indicator and sleep time appears in the display window.

2 Each time you press SLEEP the setting changes in the following order.

$$ \begin{array}{l}\text { SLEEP } 1 8 0 \rightarrow 1 5 0 \rightarrow 1 2 0 \rightarrow 9 0 \rightarrow 8 0 \rightarrow 7 0 \rightarrow 6 0 \rightarrow 5 0 \rightarrow\4 0 \rightarrow 3 0 \rightarrow 2 0 \rightarrow 1 0 \rightarrow O F F\end{array} $$

Note

- You can check the time remaining before the DVD/CD receiver turns off.

Press SLEEP. The remaining time appears in the display window.

Dimmer

This function will change the brightness of the display window on the front panel during in power-on status.

Press the DIMMER repeatedly.

Mute

Press MUTE to mute your unit.

You can mute your unit in order, for example, to answer the telephone, "MUTE" indicator flashes in the display window.

Using Headphone Jack

Connect a stereo headphone plug ( 3.5mm) into the PHONES connector.

The speakers are automatically disconnected when you plug in a headphone (not supplied).

Selecting input source

You can use VCRs or other units connected to the AV1, AV2 connectors or Optical connector. Refer to the owner's manual supplied with the unit for further information on the operation.

Press AUX and D.INPUT repeatedly on the remote control to select the desired input source.

Each time you press this button, the mode of the function changes in the following sequence:

- AV 1: for selecting the analog signal from AV1 AUDIO IN (L/R) & VIDEO IN Connectors.

- AV 1 OPT: for selecting the optical digital signal from AV1 VIDEO IN & OPTICAL IN Connector.

- AV 2: for selecting the analog signal from AV2 AUDIO IN (L/R) & VIDEO IN Connectors.

- AV 2 OPT: for selecting the optical digital signal from AV2 VIDEO IN & OPTICAL IN Connector.

Notes

- The Optical input function is available only when the other unit's Sampling Frequency is 32 \~ 96kHz.

- You can also select the input source by pressing FUNCTION button on the front panel.

XTS (Excellent True Sound)

You can enjoy the vivid stereophonic sound of the digital original source without any signal distortion.

Each time you press XTS during 2 channel mode, the setting changes in the following order. XTS-1 → XTS-2 → XTS-3 → XTS OFF ...

Tips:

- XTS-1: When playing the movie with the weak bass sound relatively to the general music, it enforces the sense of sound at woofer for you to satisfy with.

- XTS- 2: In the mode of 2 CH BYPASS, It creates the high display effect by playing the sound source via the rear speakers same as the front speakers.

- XTS- 3: You can operate both XTS- 1 and XTS- 2 simultaneously and it can complement the relative degrading of the sound pitch of the woofer at the XTS- 2 mode.

Note

- The XTS-2 mode is temporarily disabled when changing from 2.1 CH to 5.1 CH and it is enabled when changing it to 2.1 CH.

KARAOKE Operation

You can play KARAOKE (singing along) with karaoke disc by connecting a microphone to the unit.

You can enjoy KARAOKE with a stereo-recorded disc, even if it is a non-karaoke disc, by reducing the singer's voice.

Karaoke Basic Playback

1 Check if the system is connected. (Refer to the page 10-12.)
2 Turn on the powers of TV (or Amplifier) and DVD Karaoke and enter to the video mode on TV.
3 Press OPEN/CLOSE (▲) to open the disc tray and load supplied karaoke disc in the tray with the label facing up.
4 Press OPEN/CLOSE (▲) to close the tray. [TV Screen]

KARAOKE loading...

5 Connect the microphone to the MIC 1 or MIC 2 jack.
6 Select the melody number you want by pressing NUMERIC buttons.

If you cancel the selected melody number, press the CLEAR.

7 Press PLAY.

The selected melody number is played.

Sing in tone with microphone.

After melody ends, it is stopped automatically and score appears.

Note

When you use a microphone except Karaoke function, you can't enjoy 5.1 channel output. Only 2 channel sound will out by the influence of the microphone system.

Karaoke Advanced Playback

To Adjust MIC Volume

Turn the MIC VOL. on the front panel clockwise to increase the microphone volume or counterclockwise to decrease it. (0\~15 steps)

To Adjust ECHO Volume

You can give an echo effect to the sound from the microphones.

Turn the ECHO VOL. on the front panel clockwise to increase the echo volume or counterclockwise to decrease it. (0\~15 steps)

Key Control

You can change the key to suit your vocal range.

You can adjust the key to 13 steps (6steps higher, 6steps lower and the original key).

- The setting appears on the screen.

Press b- KEY CON. - # buttons repeatedly on the remote control to find the key that suits your vocal range.

• To flatten the key one by one, press the KEY CONTROL (b) repeatedly during playback.
• To sharp the key one by one, press the KEY CONTROL (#) repeatedly during playback.
• To return to the original key, press the KEY CONTROL (b/#) repeatedly to appear the original key.

KARAOKE Operation

Reserving the Songs

When you want to make a reservation of next melody, you can enjoy the most 8 melodies reservation Without waiting.

1 Press the NUMERIC buttons to reserve melody number you want in the karaoke disc play mode.

Melody number appears on the TV screen.

Press PROGRAM.

The melody number is made a reservation.

Repeat steps 1-2.

You can reserve 8 songs.

T ip

After the one song finishes its playback, the next song will be playback automatically.

To cancel the reserved song

Each time you press CLEAR, the reserved song will be cancelled one by one.

To cancel or change the wrong reserved song

Press the PROGRAM to move to the desired position, then press the CLEAR to cancel the reserved song.

Male/Female Function

If you want to sing a song of MAN's or WOMEN's key, press MALE/FEMALE button repeatedly to change MAN's or WOMEN's key.

Tempo Change

You can use this function when you want to play fast or slow.

• Press TEMPO + repeatedly during singing to play faster.
• Press TEMPO - repeatedly during singing slower.

Shadow Function

If the screen caption and the song's subtitle are mixed up, the song's subtitle may be invisible. In this case, to highlight the song's subtitle, press SHADOW.

- It will be highlighted by background shadow image.

Karaoke MENU Playback

Preparation

Press DISC MENU on the karaoke mode. The main MENU appears on the screen.

Main MENU (On the TV screen)

1. SETUP 2. MUSIC LIST 3. RANDOM 4. CHALLENGE

SETUP (1. SETUP)

1 Select 1. SETUP by pressing ▲ / ▼ on the main menu.

2 Use ◄/▶ to select the desired option, and press SELECT/ENTER.

1. SCORE On Off 2. FANFARE On Off 3. LYRIC On Off 4. CHORUS On Off

SCORE On/Off

On : When singing by selection of melody, song score comes out after one piece of song is ended.

To cancel it, select the Off.

FANFARE On/Off

On : In condition of POWER ON, scoring fanfare operates. The fanfare sound comes out after singing finished.

To cancel it, select the Off.

LYRIC On/Off

On : When singing by selection of melody, song lyric appears on the TV screen.

To cancel it, select the Off.

CHORUS On/Off

On: When singing by selection of melody, song chorus is heard a sound.

To cancel it, select the Off.

Note

To move to the main menu, press MENU or RETURN.

KARAOKE Operation

MUSIC LIST

POP SONGS and CAROLS & KID'S SONGS

1 Select "2. MUSIC LIST" by pressing the ▲ / ▼ on the main menu.

The POP SONGS, CAROLS & KID'S SONGS and CLASSICAL MUSIC menu will be shown on the TV screen.

1. POP SONGS 2. CAROLE & KID'S SONGS 3. CLASSICAL MUSIC

2 Select "1.SONG LIST" or "2.SINGER LIST" by pressing the ▲/▼, and press SELECT/ ENTER. SONG LIST and SINGER LIST menu will be shown on the TV screen.

1. SONG LIST 2. SINGER LIST

SONG LIST

1 Select "1.SONG LIST" and select the initial of the song title you want by pressing the ▲ / ▼, then press SELECT/ ENTER.

SONG LIST ( 4 2 5 9 A B C Move Select

2 Select the song title you want by pressing the ▲ / ▼, and press SELECT/ ENTER.

SONG LIST No. Title Singer DOCK WITH NOVOUS GRC... THE ROLL... None Select

SINGER LIST

1 Select "2.SINGER LIST" and select the initial of the singer you want by pressing the ▲ / ▼ in the SONG LIST and SINGER LIST menu, and press SELECT/ ENTER.

SINGER LIST 1 1 3 A B C D E Show Select

2 Select the singer you want by pressing the ▲ / ▼, and press SELECT/ ENTER.

SINGER LIST Singer ABOGA ABC ACE OF BASE ACKER BILK AEROSMITA A-HA AIR- SUPPLY AL B. SURE!

3 Select the song title of the singer you want by pressing the ▲ / ▼, and press SELECT/ ENTER.

SINGER LIST No. TSP Singer 1377 WATRELEYER ABBA 1377 WATERLOO ABBA Wave Select

Note

To move the previous mode, select the 📄 by pressing the 🔺 / √, then press SELECT/ ENTER.

KARAOKE Operation

CLASSICAL MUSIC

1 Select "3. CLASSICAL MUSIC" by pressing the ▲ / ▼ on the MUSIC LIST menu, then press SELECT/ENTER.

The CLASSIC LIST and COMPOSER LIST menu will be shown on the TV screen.

1. CLASSIC LIST 2. COMPOSER LIST

CLASSIC LIST

1 Select "1.CLASSIC LIST" and select the initial of the song title you want by pressing the ▲ / ▼, then press SELECT/ ENTER.

CLASSIC LIST 1 2 6 A B C D E Move Select

2 Select the song title you want by pressing the ▲ / ▼, and press SELECT/ ENTER.

CLASSIC LIST No. Title Compuer HKEY 12 CTUBE OR 25 C:\LOGS More Select

COMPOSER LIST

1 Select "2. COMPOSER LIST" and select the initial of the composer you want by pressing the ▲ / ▼, then press SELECT/ENTER.

COMPOSER LIST C D E F G H J Browse Select

2 Select the composer you want by pressing the ▲ / ▼, and press SELECT/ ENTER.

COMPOSER LIST Compressor BACH BEETHCINEN BELLINI BIZET BRAHMS

3 Select the song title of the composer you want by pressing the ▲ / ▼, and press SELECT/ ENTER.

COMPOSER LIST No. Title 1866 CONCENTO FOR VIO... BEETHOVEN 1849 CONCERTO FOR PIA... BEETHOVEN 1863 SONATA FOR PIANO... BEETHOVEN 1860 SONATA FOR PIANO... BEETHOVEN 1859 SONATA FOR PIANO... BEETHOVEN 1868 SONATA FOR PIANO... BEETHOVEN 1867 SONATA FOR PIANO... BEETHOVEN 1866 SONATA FOR PIANO... BEETHOVEN More Select

Note

To move the previous mode, select the 📄 by pressing the 🔺 / √, then press SELECT/ ENTER.

KARAOKE Operation

RANDOM

1 Select "3. RANDOM" by pressing ▲ / ▼ on the main menu.

1. SETUP 2. MUSIC LIST 3. RANDOM 4. CHALLENGE

2 Press SELECT/ENTER to begin randomly.

CHALLENGE

It has a function which enjoy a song game dividing by two teams of red team & blue team.

1 Select "4. CHALLENGE" by pressing ▲/▼ on the main menu. It appears as below.

SET NUMBER TO WIN 1 2 3 4 5 6 7 8 9 CHALLENGE SCORE 60 70 80 90 START

2 Select "SET NUMBER TO WIN" by pressing 🔊/▼, and select one of NUMERIC buttons 1\~9 by pressing 🔊/▼ to select winner's number, then press SELECT/ ENTER.

3 Select "CHALLENGE SCORE" by pressing ▲/▼, and select one of 60,70,80 or 90 by pressing ▲/▶ to select success score, then press SELECT/ ENTER.

4 Select "START" by pressing ▲/▼, then press SELECT/ ENTER. It appears as below.

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

5 Select number you want by pressing ▲ / ▼ and press SELECT/ ENTER. Sing along with the accompaniment.

6 Repeat step 4\~5. Change the team of red team or blue team alternately.

7 When reaching the targeted winning number, the "CONGRATULATION!" will be shown on the TV screen. It appears as below.

CONGRATULATION!

Whether you keep going the song game or not, select "1. YES" or "2. NO" by pressing ▲ / ▼ as below.

ONE MORE CHALLENGE ? 1. YES 2. NO

Language Code List

Enter the appropriate code number for the initial settings "Disc Audio", "Disc Subtitle" and/or "Disc Menu" (See page 16).

Code	Language	Code	Language	Code	Language	Code	Language
6566	Abkhazian	7074	Fiji	7678	Lingala	8373	Singhalese
6565	Afar	7073	Finnish	7684	Lithuanian	8375	Slovak
6570	Afrikaans	7082	French	7775	Macedonian	8376	Slovenian
8381	Albanian	7089	Frisian	7771	Malagasy	8379	Somali
6577	Ameharic	7176	Galician	7783	Malay	6983	Spanish
6582	Arabic	7565	Georgian	7776	Malayalam	8385	Sudanese
7289	Armenian	6869	German	7784	Maltese	8387	Swahili
6583	Assamese	6976	Greek	7773	Maori	8386	Swedish
6588	Aymara	7576	Greenlandic	7782	Marathi	8476	Tagalog
6590	Azerbaijani	7178	Guarani	7779	Moldavian	8471	Tajik
6665	Bashkir	7185	Gujarati	7778	Mongolian	8465	Tamil
6985	Basque	7265	Hausa	7865	Nauru	8484	Tatar
6678	Bengali; Bangla	7387	Hebrew	7869	Nepali	8469	Telugu
6890	Bhutani	7273	Hindi	7879	Norwegian	8472	Thai
6672	Bihari	7285	Hungarian	7982	Oriya	6679	Tibetan
6682	Breton	7383	Icelandic	8065	Panjabi	8473	Tigrinya
6671	Bulgarian	7378	Indonesian	8083	Pashto, Pushto	8479	Tonga
7789	Burmese	7365	Interlingua	7065	Persian	8482	Turkish
6669	Byelorussian	7165	Irish	8076	Polish	8475	Turkmen
7577	Cambodian	7384	Italian	8084	Portuguese	8487	Twi
6765	Catalan	7465	Japanese	8185	Quechua	8575	Ukrainian
9072	Chinese	7487	Javanese	8277	Rhaeto-Romance	8582	Urdu
6779	Corsican	7578	Kannada	8279	Rumanian	8590	Uzbek
7282	Croatian	7583	Kashmiri	8285	Russian	8673	Vietnamese
6783	Czech	7575	Kazakh	8377	Samoan	8679	Volapuk
6865	Danish	7589	Kirghiz	8365	Sanskrit	6789	Welsh
7876	Dutch	7579	Korean	7168	Scots Gaelic	8779	Wolof
6978	English	7585	Kurdish	8382	Serbian	8872	Xhosa
6979	Esperanto	7679	Laothian	8372	Serbo-Croatian	7473	Yiddish
6984	Estonian	7665	Latin	8378	Shona	8979	Yoruba
7079	Faroese	7686	Latvian, Lettish	8368	Sindhi	9085	Zulu

Country Code List

Enter the appropriate code number for the initial setting "Country Code" (See page 19).

Code	Country	Code	Country	Code	Country	Code	Country
AD	Andorra	ER	Eritrea	LC	Saint Lucia	SC	Seychelles
AE	United Arab Emirates	ES	Spain	LI	Liechtenstein	SD	Sudan
AF	Afghanistan	ET	Ethiopia	LK	Sri Lanka	SE	Sweden
AG	Antigua and Barbuda	FI	Finland	LR	Liberia	SG	Singapore
AI	Anguilla	FJ	Fiji	LS	Lesotho	SH	Saint Helena
AL	Albania	FK	Falkland Islands	LT	Lithuania	SI	Slovenia
AM	Armenia	FM	Micronesia	LU	Luxembourg	SJ	Svalbard and Jan Mayen Islands
AN	Netherlands Antilles	FO	Faroe Islands	LV	Latvia
AO	Angola	FR	France	LY	Libya	SK	Slovak Republic
AQ	Antarctica	FX	France (European Territory)	MA	Morocco	SL	Sierra Leone
AR	Argentina			MC	Monaco	SM	San Marino
AS	American Samoa	GA	Gabon	MD	Moldavia	SN	Senegal
AT	Austria	GB	Great Britain	MG	Madagascar	SO	Somalia
AU	Australia	GD	Grenada	MH	Marshall Islands	SR	Suriname
AW	Aruba	GE	Georgia	MK	Macedonia	ST	Saint Tome and Principe
AZ	Azerbaidjan	GF	French Guyana	ML	Mali	SU	Former USSR
BA	Bosnia-Herzegovina	GH	Ghana	MM	Myanmar	SV	El Salvador
BB	Barbados	GI	Gibraltar	MN	Mongolia	SY	Syria
BD	Bangladesh	GL	Greenland	MO	Macau	SZ	Swaziland
BE	Belgium	GM	Gambia	MP	Northern Mariana Islands	TC	Turks and Caicos Islands
BF	Burkina Faso	GN	Guinea	MQ	Martinique (French)	TD	Chad
BG	Bulgaria	GP	Guadeloupe (French)	MR	Mauritania	TF	French Southern Territories
BH	Bahrain	GQ	Equatorial Guinea	MS	Montserrat
BI	Burundi	GR	Greece	MT	Malta	TG	Togo
BJ	Benin	GS	S. Georgia & S. Sandwich Isls.	MU	Mauritius	TH	Thailand
BM	Bermuda			MV	Maldives	TJ	Tadjikistan
BN	Brunei Darussalam	GT	Guatemala	MW	Malawi	TK	Tokelau
BO	Bolivia	GU	Guam (USA)	MX	Mexico	TM	Turkmenistan
BR	Brazil	GW	Guinea Bissau	MY	Malaysia	TN	Tunisia
BS	Bahamas	GY	Guyana	MZ	Mozambique	TO	Tonga
BT	Bhutan	HK	Hong Kong	NA	Namibia	TP	East Timor
BV	Bouvet Island	HM	Heard and McDonald Islands	NC	New Caledonia (French)	TR	Turkey
BW	Botswana			NE	Niger	TT	Trinidad and Tobago
BY	Belarus	HN	Honduras	NF	Norfolk Island	TV	Tuvalu
BZ	Belize	HR	Croatia	NG	Nigeria	TW	Taiwan
CA	Canada	HT	Haiti	NI	Nicaragua	TZ	Tanzania
CC	Cocos (Keeling) Islands	HU	Hungary	NL	Netherlands	UA	Ukraine
CF	Central African Republic	ID	Indonesia	NO	Norway	UG	Uganda
CG	Congo	IE	Ireland	NP	Nepal	UK	United Kingdom
CH	Switzerland	IL	Israel	NR	Nauru	UM	USA Minor Outlying Islands
CI	Ivory Coast	IN	India	NU	Niue
CK	Cook Islands	IO	British Indian Ocean Territory	NZ	New Zealand	US	United States
CL	Chile			OM	Oman	UY	Uruguay
CM	Cameroon	IQ	Iraq	PA	Panama	UZ	Uzbekistan
CN	China	IR	Iran	PE	Peru	VA	Vatican City State
CO	Colombia	IS	Iceland	PF	Polynesia (French)	VC	Saint Vincent & Grenadines
CR	Costa Rica	IT	Italy	PG	Papua New Guinea
CS	Former Czechoslovakia	JM	Jamaica	PH	Philippines	VE	Venezuela
CU	Cuba	JO	Jordan	PK	Pakistan	VG	Virgin Islands (British)
CV	Cape Verde	JP	Japan	PL	Poland	VI	Virgin Islands (USA)
CX	Christmas Island	KE	Kenya	PM	Saint Pierre and Miquelon	VN	Vietnam
CY	Cyprus	KG	Kyrgyzstan	PN	Pitcairn Island	VU	Vanuatu
CZ	Czech Republic	KH	Cambodia6	PR	Puerto Rico	WF	Wallis and Futuna Islands
DE	Germany	KI	Kiribati	PT	Portugal	WS	Samoa
DJ	Djibouti	KM	Comoros	PW	Palau	YE	Yemen
DK	Denmark	KN	Saint Kitts & Nevis Anguilla	PY	Paraguay	YT	Mayotte
DM	Dominica	KP	North Korea	QA	Qatar	YU	Yugoslavia
DO	Dominican Republic	KR	South Korea	RE	Reunion (French)	ZA	South Africa
DZ	Algeria	KW	Kuwait	RO	Romania	ZM	Zambia
EC	Ecuador	KY	Cayman Islands	RU	Russian Federation	ZR	Zaire
EE	Estonia	KZ	Kazakhstan	RW	Rwanda	ZW	Zimbabwe
EG	Egypt	LA	Laos	SA	Saudi Arabia
EH	Western Sahara	LB	Lebanon	SB	Solomon Islands

Troubleshooting

Check the following guide for the possible cause of a problem before contacting service.

Symptom	Cause	Correction
No power.	The power cord is disconnected.	Plug the power cord securely into the wall outlet.
The power is on, but the DVD/CD Receiver does not work.	No disc is inserted.	Insert a disc. (Check that the DVD or, audio CD indicator in the DVD display is lit.)
No picture.	The TV is not set to receive DVD signal output.	Select the appropriate video input mode on the TV so the picture from the DVD/ CD Receiver appears on the TV screen.
	The video cable is not connected securely.	Connect the video cable into the jacks securely.
	The connected TV power is turned off.	Turn on the TV.
There is no sound or only a very low-level sound is heard.	The equipment connected with the audio cable is not set to receive DVD signal output.	Select the correct input mode of the audio receiver so you can hear the sound from the DVD/CD Receiver.
	The audio cables are not connected securely.	Connect the audio cable into the jacks securely.
	The power of the equipment connected with the audio cable is turned off.The audio connecting cable is damaged.	Turn on the equipment connected with the audio cable.Replace it with new one.
The playback picture is poor.	The disc is dirty.	Clean the disc.
The DVD/CD Receiver does not start playback.	No disc is inserted.	Insert a disc. (Check that the DVD, or audio CD indicator in the DVD display is lit.)
	An unplayable disc is inserted.	Insert a playable disc. (Check the disc type, colour system and Regional code.)
	The disc is placed upside down.	Place the disc with the playback side down.
	The disc is not placed within the guide.	Place the disc on the disc tray correctly inside the guide.
	The disc is dirty.	Clean the disc.
	A menu is on the TV screen.	Press the SET UP button to turn off the menu screen.
	The Rating level is set.	Cancel the Rating function or change the rating level.
Loud hum or noise is heard.	The plugs and jacks are dirty.	Wipe them with a cloth slightly moistened with alcohol.
	The disc is dirty.	Clean the disc.
	The speakers and components are connected poorly.	Connect the speakers and components securely.
	The DVD/CD Receiver is located too close to the TV.	Move your TV away from the audio components.

Troubleshooting (Cont'd)

Symptom	Cause	Correction
Radio stations cannot be tuned in.	The antenna is positioned or connected poorly.	Connect the antenna securely.
		Adjust the antennas and connect an external antenna if necessary.
	The signal strength of the stations is too weak (when tuning in with automatic tuning).	Tune in the station manually.
	No stations have been preset or preset stations have been cleared (when tuning by scanning preset stations).	Preset the stations (page 30).
The remote control does not work properly.	The remote control is not pointed at the remote sensor of the DVD/CD Receiver.	Point the remote control at the remote sensor of the DVD/CD Receiver.
	The remote control is too far from the DVD/CD Receiver.	Use the remote control within about 23 ft (7 m).
	There is an obstacle in the path of the remote control and the DVD/CD Receiver.	Remove the obstacle.
	The batteries in the remote control are flat.	Replace the batteries with new ones.
The front panel display is too dim.	Nothing is displayed on the front panel display.	Press DIMMER on the remote control.

Specification

General		Power supply	Refer to main label
		Power consumption	Refer to main label
		Mass	4.6 kg
		External dimensions (W x H x D)	430 x 55 x 350 mm
		Operating conditions	Temperature: 5°C to 35°C, Operation status: Horizontal
		Operating humidity	5% to 85%
CD/DVD		Laser	Semiconductor laser, wavelength 650 nm
		Signal system	PAL 625/50, NTSC 525/60
		Frequency response (audio)	150 Hz to 18 kHz
		Signal-to-noise ratio (audio)	More than 70 dB (1 kHz, NOP, 20 kHz LPF/A-Filter)
		Dynamic range (audio)	More than 70 dB
		Harmonic distortion (audio)	0.5 % (1 kHz, at 12W position) (20 kHz LPF/A-Filter)
Video		Video input	1.0 V (p-p), 75 Ω, negative sync., RCA jack x 2
		Video output	1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1
		S-video output	(Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin x 1(C) 0.3 V (p-p), 75 Ω
		Component Video output	(Y) 1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 1
Tuner	FM	Tuning Range	87.5 - 108.0 MHz or 65.0 - 74.0 MHz, 87.5 - 108.0 MHz
		Intermediate Frequency	10.7 MHz
		Signal-to Noise Ratio	60 dB (Mono)
		Frequency Response	150 - 8,000 Hz
	AM [MW]	Tuning Range	522 - 1,611 kHz or 530 - 1,610 kHz
		Intermediate Frequency	450 kHz
Amplifier		Stereo mode	60W + 60W (8Ω at 1 kHz, THD 10 %)
		Surround mode(* Depending on the sound mode settings and the source, there may be no sound output.)	Front: 60W + 60W (THD 10 %)Centre*: 60WSurround*: 60W + 60W (8Ω at 1 kHz, THD 10 %)Subwoofer*: 120W (4Ω at 30 Hz, THD 10 %)
		Inputs	VIDEO 1, VIDEO 2, OPTICAL AUDIO
		Outputs	PHONES: (32 Ω, 1.0 V)
Speakers			Satellite Speaker(LHS-K6540T)	Centre speaker(LHS-K6540C)	Passive Subwoofer(LHS-K6540W)
		Type	2 Way 2 Speaker	2 Way 2 Speaker	1 Way 1 Speaker
		Impedance	8 Ω	8 Ω	4 Ω
		Frequency Response	150 - 20,000 Hz	150 - 20,000 Hz	40 - 1,500 Hz
		Sound Pressure Level	85 dB/W (1m)	85 dB/W (1m)	83 dB/W (1m)
		Rated Input Power	60 W	60 W	120 W
		Max. Input Power	120 W	120 W	240 W
		Net Dimensions (W x H x D)	114.5 x 197.5 x 124.5 mm	192.5 x 119.5 x 124.5 mm	195 x 379.5 x 418.5 mm
		Net Weight	0.9kg	0.9kg	6.6kg
Supplied Accessories		Audio cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	Video cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
		Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..	Speaker cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
		AM loop antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Batters (AAA) . . . . . . . . . . . . . . . . . . . . . . . . . . .

* Designs and specifications are subject to change without notice.

LG