SW-UG24L2F-075 - Unspecified Mach Power - Free user manual and instructions

Product Type	26-Port Gigabit Unmanaged Switch
Model	SW-UG24L2F-075
Fixed Ports	24 x 10/100/1000 Base-T, 2 x 1000 Base-X SFP
Switching Capacity	52 Gbps
Forwarding Rate	10M: 14880 pps/port, 100M: 148809 pps/port, 1000M: 1488090 pps/port
MAC Address Table	8K entries (estimated)
Dimensions (L x W x H)	440 mm x 170 mm x 44 mm
Weight	< 2.5 kg
Power Supply	AC 100-240V, 50-60Hz, 12V/1.5A
Power Consumption	15W (max)
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Operating Humidity	10% to 90% RH, non-condensing
Storage Humidity	5% to 90% RH, non-condensing
Lightning Protection	Yes, carrier class power protection
LED Indicators	Per port: Link/Act, Speed; System: Power
Auto-Negotiation	Supports 10/100/1000M, duplex mode auto-detection
MDI/MDIX	Auto-sensing, no crossover cable needed
Energy Saving	IEEE 802.3az (Energy Efficient Ethernet), port energy detection, CPU variable-frequency, hibernation
Forwarding Mode	Store-and-forward
MAC Address Learning	Automatic learning and aging
Installation	Plug-and-play, no configuration required
Recommended Cable	CAT5/5e UTP or better
Regulatory Compliance	FCC, CE (estimated)

Frequently Asked Questions - SW-UG24L2F-075 Mach Power

Does the Mach Power SW-UG24L2F-075 require any configuration?

No, it is an unmanaged switch with plug-and-play design. Simply connect power and network cables; it works automatically.

What type of SFP modules are compatible with the switch?

The switch supports 1000 Base-X SFP modules. Use standard Gigabit SFP transceivers (e.g., 1000BASE-SX, 1000BASE-LX) for fiber connections.

Can the switch be mounted in a rack?

Yes, the dimensions (440x170x44 mm) are standard 1U rack-mount height. It includes rack-mount brackets (if included) or can be placed on a desktop.

What is the maximum power consumption?

The maximum power consumption is 15W. The switch uses IEEE 802.3az (Energy Efficient Ethernet) to reduce power when ports are idle.

How do I interpret the LED indicators?

Each port has two LEDs: Link/Act (green: link, blinking: activity) and Speed (off: 10M, green: 100M, orange: 1000M). The Power LED shows system power status.

Is the switch suitable for outdoor use?

No, the operating temperature is 0°C to 40°C and humidity 10%-90% RH non-condensing. It is designed for indoor use only.

What is the switching capacity and forwarding rate?

Switching capacity is 52 Gbps. Forwarding rate: 10M: 14880 pps, 100M: 148809 pps, 1000M: 1488090 pps per port.

Does the switch support jumbo frames?

The manual does not specify jumbo frame support. Typically, unmanaged switches support standard Ethernet frame sizes (1518 bytes). For jumbo frames, check the product datasheet.

Can I use CAT6 or CAT7 cables?

Yes, the switch supports any CAT5e or better cable. CAT6 or CAT7 will work and may improve performance on longer runs.

What is the warranty period?

Warranty information is not provided in the manual. Typically, Mach Power offers 1 to 3 years warranty. Contact support for details.

USER MANUAL SW-UG24L2F-075 Mach Power

26-Port Gigabit Unmanaged Switch

SW-UG24L2F-075

Description

SW-UG24L2F-075 is wire-speed Layer 2 Ethernet Switches, adopting plug-and-play design, no configuration. Besides the excellent forwarding capacity, switch is with high security reliability. It adopt carrier class power protection to prevent against lightning, overpressure and surging, keeping excellent working performance in bad environments. Switch energy-saving design as well, which make they the most cost-efficient choice for access switches.

Main Features

Non-blocking High-speed Forwarding

Supports L2 level wire-speed switching, which enables all ports to forward packets without blocking.

Support MDI/MDIX Function

Plug-and-play design, automatically identify the network cable types( straight forward cable or cross-over cable) and communicate normally.

Support Auto-negotiation of port rate

Support 10/100/1000M multirate terminal, automatically identify the terminal network card rate and duplex mode, reducing maintenance requirements;

The LED indicator can dynamically show the different operation rate.

Innovative Energy Saving Design, the leader of low-carbon communication

Support IEEE 802.3az(Energy Efficient Ethernet), port energy detection, CPU variable-frequency and device hibernate technology, greatly reducing energy consumption and noise without compromising performance and stability.

Technical Specification

Hardware Specifications
Fixed Ports	24 x 10/100/1000 Base-T ports
	2 x 1000 Base-X SFP ports.
Transmission Media	Recommended: CAT5/5e UTP or better
Switching Capacity	52G
Forwarding Rate	10M:14880pps/port
	100M:148809pps/port
	1000M:1488090pps/port
Temperature	Operating temperature: (0 - 40)°C
	Storage temperature: (-40 - 70)°C
Humidity	Operating humidity: (10% - 90%) RH, non-condensing
	Storage humidity: (5% - 90%) % RH, non-condensing
Dimensions	440(L) x 170(W) x 44(H) mm
Power	AC 100-240V,50Hz~60Hz,12V/1.5A
Power consumption	15W
Weight	<2.5Kg

Lightning protection

MAC address table

LED Indicator

Software specifications

Forwarding mode

MAC address learning