82-1012 - Car accessory Metra - Free user manual and instructions
Find the device manual for free 82-1012 Metra in PDF.
User questions about 82-1012 Metra
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Car accessory in PDF format for free! Find your manual 82-1012 - Metra and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 82-1012 by Metra.
USER MANUAL 82-1012 Metra
INSTALLATION INSTRUCTIONS FOR PART 82-1012
APPLICATIONS
Jeep Wrangler 1997-2006 82-1012
KIT FEATURES
- 82-1012 (adapts 4" speaker to dash location)
KIT COMPONENTS
• A) 82-1012 Speaker adaptor plates • B) (8) #8 x 1/2" Phillips screws
A
B
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 72-6512 speaker harness
Antenna Adapter: • Not required
TOOLS REQUIRED
- Phillips screwdriver
Table of Contents
Dash Disassembly
- Jeep Wrangler 1997-2006....2
Kit Preparation....2
Kit Assembly 3
CAUTION: Metra recommends disconnecting the negative battery terminal before beginning any installation. All accessories, switches, and especially air bag indicator lights must be plugged in before reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the aftermarket radio.
82-1012
Dash Disassembly Kit Preparation
Note: Parts 82-1011, 82-1012, 82-1013 installation directions cross reference. Use the following instructions for each dash location.
- Remove (2) Phillips screws securing the speaker grille panel. (Figure A)
- Unclip panel and remove. (Figure A)
Continue to kit preparation
natural_image
Technical line drawing of a device casing with ventilation grilles and internal components (no text or symbols)(Figure A)
- Mount aftermarket speaker to the speaker adaptor plate with the screws supplied with the speaker. (Figure A)
Continue to kit assembly
natural_image
Technical line drawing of a mechanical assembly with exploded view of a component (no text or symbols)(Figure A)
82-1012
Kit Assembly
- Locate the factory wiring harness in the dash. Metra recommends using the 72-6512 speaker harness to connect to the factory wiring.
Note: For some speakers a small cut in the factory speaker support may be necessary.
- Mount the assembly to the dash location with the (4) supplied #8 x 1/2" Phillips screws.
natural_image
Technical line drawing of a mechanical component with two flanged housing (no text or symbols)(Figure A)
Notes
INSTALLATION INSTRUCTIONS FOR PART 82-1012
KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by paralling in the most recognized and supported
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
650-354-6182 for more information and take steps toward a better tomorrow.
Metra recommends MECP
certified technicians