95-7377B - Car accessory Metra - Free user manual and instructions
Find the device manual for free 95-7377B Metra in PDF.
User questions about 95-7377B Metra
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Car accessory in PDF format for free! Find your manual 95-7377B - Metra and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 95-7377B by Metra.
USER MANUAL 95-7377B Metra
INSTALLATION INSTRUCTIONS FOR PART 95-73778
Kia Optima 2016-up 95-7377B
KIT FEATURES
• ISO DDIN radio provision
- Painted matte black
natural_image
Interior view of a car dashboard with a mounted screen (no visible text or symbols)KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) (2) Panel clips
A
natural_image
Technical line drawing of a mechanical bracket or frame (no text or symbols)B
C
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-7304 Antenna Adapter: • Not required
Table of Contents
Dash Disassembly 2
Kit Preparation....3
Kit Assembly 3
TOOLS REQUIRED
- Panel removal tool - Phillips screwdriver
CAUTION! All accessories, switches, climate controls panels, and especially air bag indicator lights must be connected before cycling the ignition. Also, do not remove the factory radio with the key in the on position, or while the vehicle is running.
95-73778
Dash Disassembly
- Open the glove box and remove the trim at the top of the opening, and then remove the (2) Phillips screws exposed. (Figure A)
- Unclip the trim that runs along the dash from the right side A/C vent to the steering column, and then remove the (2) Phillips screws securing the A/C vent/hazard panel. (Figure B)
- Unclip and remove the right side trim panel from the center console, and then remove the (1) Phillips screw securing the A/C vent/hazard panel. (Figure C)
- Unclip the A/C vent/hazard panel, disconnect the hazard switch, and then remove the panel. (Figure D)
- Using caution not to break the panel, carefully unclip and remove the radio trim panel. (Figure D)
natural_image
Diagram of a car interior showing a door panel with arrows indicating direction (no text or symbols present)(Figure A) (Figure C)
natural_image
Interior view of a car showing the dashboard and air vent (no text or symbols visible)(Figure B)
Note: There are (8) clips that attach the panel to the vehicle: (2) at the top-middle, (2) at the bottom corners, (2) at the top corners, and (2) in the center (these 2 are only in non-nav models). (Figure E)
6. Remove the (4) Philips screws securing the radio and then remove.
Continue to Kit Preparation
natural_image
Interior view of a car showing the dashboard and air vent (no text or symbols visible)(Figure D)
natural_image
Diagram of a car gear shift mechanism showing intake and outlet components (no text or labels)
text_image
Technical diagram of a front-mounted device with labeled ports and directional arrows indicating orientation or movement.(Figure E)
95-73778
Kit AssemblyKit Preparation
- Attach the (2) panel clips to the radio trim panel as shown. (Figure A)
Continue to Kit Assembly
natural_image
Technical line drawing of a vehicle front panel with mounting brackets (no text or symbols)ISO DDIN radio provision
- Attach the radio brackets to the radio using the screws supplied with the radio. (Figure A)
-
Locate the factory wiring harness and connector in the dash and complete all necessary connections to the radio. Metra recommends using the proper mating adapter from Metra and/or Axxess. Test the radio for proper operation.
-
Secure the completed assembly into the dash using the factory screws.
-
Snap the radio trim panel over the completed assembly, and then reassemble the dash in reverse order of disassembly.
natural_image
Technical line drawing of an electronic device with internal components and mounting holes (no text or symbols)(Figure A)(Figure A)
INSTALLATION INSTRUCTIONS FOR PART 95-73778
IMPORTANT
If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated. Please have the vehicle apart and ready to perform troubleshooting steps before calling.
KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerInstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.
Metra recommends MECP certified technicians