95-7812B - Car accessory Metra - Free user manual and instructions
Find the device manual for free 95-7812B Metra in PDF.
User questions about 95-7812B Metra
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Car accessory in PDF format for free! Find your manual 95-7812B - Metra and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 95-7812B by Metra.
USER MANUAL 95-7812B Metra
INSTALLATION INSTRUCTIONS FOR PART 95-78128
Honda Civic LX 2016-up 95-7812B
KIT FEATURES
• ISO DDIN radio provision
- Painted scratch resistant matte black
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) (6) Plastic panel clips
natural_image
Interior view of a car dashboard and infotainment system (no visible text or symbols)A
natural_image
Technical line drawing of a rectangular mechanical component with mounting flanges (no text or symbols)B
C
WIRING & ANTENNA CONNECTIONS (sold separately)
Wire harness: • 70-1731 • XSVI-1731-NAV (Only required to retain NAV outputs)
Antenna adapter: • 40-HD11
Table of Contents
Dash Disassembly 2
Kit Assembly 3
TOOLS REQUIRED
- Panel removal tool - Phillips screwdriver
CAUTION! All accessories, switches, climate controls panels, and especially air bag indicator lights must be connected before cycling the ignition. Also, do not remove the factory radio with the key in the on position, or while the vehicle is running.
METRA. The World's best kits. ^TM
metraonline.com
© COPYRIGHT 2016 METRA ELECTRONICS CORPORATION
95-7812B
Dash Disassembly
- Unsnap and remove the side trim panels from the center console. (Figure A)
- Unsnap and remove the climate control panel. (Figure B)
- Remove (2) Philips screws securing the radio and then remove. (Figure C)
Continue to kit assembly
natural_image
Interior view of a car showing dashboard, steering wheel, and internal structural components (no text or labels)
natural_image
Line drawing of a car interior showing a dashboard with a hand inserting a button (no text or symbols)(Figure B)(Figure A) (Figure C)
natural_image
Diagram of a vehicle dashboard with sensors and wiring (no text or labels)
95-7812B
Kit Assembly
ISO DIN radio provision with pocket
- Attach the supplied (6) plastic clips to the radio trim panel. (Figure A)
- Attach the radio brackets to the radio trim panel. (Figure B)
- Slide the radio into the assembly, and then secure it using the screws supplied with the radio. (Figure C)
- Locate the factory wiring harness and antenna connector in the dash and complete all necessary connections to the radio. Metra recommends using the proper mating adapter from Metra and/or AXXESS. Test the radio for proper operation.
- Install the completed assembly into the dash, and then reassemble the dash in reverse order of disassembly.
natural_image
Technical line drawing of a mechanical housing component with mounting holes and dashed lines indicating assembly (no text or symbols)(Figure A) (Figure C)(Figure B)
natural_image
Technical line drawing of a mechanical housing or enclosure with mounting brackets and internal components (no text or symbols)
text_image
Technical diagram of a device with labeled ports and internal components, including a control panel and directional arrows.
INSTALLATION INSTRUCTIONS FOR PART 95-7812B
IMPORTANT
If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated. Please have the vehicle apart and ready to perform troubleshooting steps before calling.
KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerInstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.
Metra recommends MECP certified technicians