99-7316 - Car accessory Metra - Free user manual and instructions

Product Type	Car Stereo Installation Kit
Model Number	99-7316
Brand	Metra
Compatible Vehicles	Select Chrysler, Dodge, Jeep, and Ram models (1996-2004)
Radio Size Support	Single DIN or Double DIN with pocket
Material	High-grade ABS plastic
Color	Black or Dark Gray (textured finish)
Dimensions	Approx. 7 x 4 x 2 inches (installation kit)
Weight	0.5 lbs (0.23 kg)
Included Components	Dash bracket, trim panel, mounting screws, wiring harness adapter (if applicable)
Installation Difficulty	Moderate; requires basic tools
Power Supply	Passive (no power needed; adapts existing wiring)
Warranty	1 year limited warranty
Safety Certification	Complies with automotive safety standards
Cleaning Instructions	Wipe with a soft, dry cloth; avoid harsh chemicals
Repairability	Not user-serviceable; replace if damaged

Frequently Asked Questions - 99-7316 Metra

What vehicles are compatible with the Metra 99-7316?

The Metra 99-7316 is designed for select Chrysler, Dodge, Jeep, and Ram models from 1996 to 2004. Check Metra's online fit guide for your specific vehicle.

Does this kit fit single DIN or double DIN radios?

It supports single DIN radios natively, and double DIN radios with a separate pocket (not included).

What tools are needed for installation?

You will need panel removal tools, a screwdriver (Phillips and flathead), and possibly a socket set for some vehicles.

Does the kit include a wiring harness?

Some versions include a basic wiring harness adapter; however, a vehicle-specific harness may be required for full integration. Check the product description.

Is the Metra 99-7316 paintable?

Yes, the ABS plastic can be painted with automotive-grade paint after light sanding and priming.

How do I clean the kit?

Use a soft, dry cloth to wipe dust. For stubborn dirt, slightly dampen with water. Avoid abrasive cleaners.

What should I do if parts are missing?

Contact Metra customer support or your retailer for a replacement. Provide your purchase information and the missing part description.

Can I return the kit if it doesn't fit?

Most retailers accept returns within 30 days if the kit is unused. Verify your vehicle's compatibility before purchase.

Does the kit include installation instructions?

Yes, a printed manual is included, and a PDF version is available on Metra's website or notice-facile.com.

What is the warranty period?

Metra offers a 1-year limited warranty against defects in materials and workmanship.

USER MANUAL 99-7316 Metra

INSTALLATION INSTRUCTIONS FOR PART 99-7316

APPLICATIONS 2000-2005 Hyundai XG300/XG350

99-7316

KIT FEATURES

• DIN head unit provision
• ISO DIN head unit provision

Car infotainment device display showing front panel, control buttons, and a digital display with Chinese text

KIT COMPONENTS

A) Radio Housing | B) ISO Brackets | C) Trim Plate

Isometric line drawing of a mechanical housing or enclosure with two vertical supports and a central frame (no text or symbols)

TOOLS REQUIRED:

Phillips Screwdriver | Small Flat Blade Screwdriver

Two types of screwdrivers shown side by side, no text or symbols present

1-800-221-0932

www.metraonline.com

© COPYRIGHT 2004 METRA ELECTRONICS CORPORATION

TABLE OF CONTENTS

Dash Disassembly ....1

Kit Assembly 2,3

Final Assembly 4

2000-2005 HYUNDAI XG300/XG350

1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Unclip and remove entire panel surrounding radio and climate controls including pocket assembly at bottom of panel. (Figure A)
3 Remove (4) Phillips screws per side to remove radio and climate control. Note: It is not necessary to disconnect climate control. (Figure B)

A

B

DIN HEAD UNIT PROVISION

1 Slide the DIN cage into the Radio Housing and secure by bending the metal locking tabs down. (Figure A)
2 Slide the aftermarket head unit into the cage and secure. (Figure B)

A

Line drawing of a hand using a tool to adjust or install a device into a rack (no text or symbols visible)

B

Technical line drawing of a mechanical device with mounting brackets and control panel (no text or symbols)

ISO DIN HEAD UNIT PROVISION

1 Mount the ISO Brackets to the head unit with the screws supplied with the unit. (Figure A)
2 Slide the head unit into the radio opening until the side clips engage. (Figure B)
3 Snap the Trim plate into the Radio Housing. (Figure B)

Line drawing of a hand inserting a screwdriver into a device casing (no text or symbols)

B Right Side Clip

FINAL ASSEMBLY

1 Locate the factory wiring harness in the dash and make the connection as shown. Metra recommends using the proper mating adapter and making the connections as shown. (Isolate and individually tape off the ends of any unused wires to prevent electrical short circuit.)
2 Re-connect the negative battery terminal and test the unit for proper operation.
3 Reassemble radio and dash assemblies in reverse order of disassembly.

FINAL WIRING CONNECTIONS

Make wiring connections using the EIA color code chart shown below and the instructions included with the head unit. Metra recommends making connections as shown below; Strip, Splice, Solder, Tape. Isolate and individually tape off ends of any unused wires to prevent electrical short circuit.

A B C D

Right Rear (+).....Violet

Right Rear (-) ..... Violet / Black

Left Rear (+).... Green

Left Rear (-) ..... Green / Black

*NOTE: When Black a wire is not present, ground radio to vehicle chassis.

All colors may not be present on all leads due to manufacturer's specifications.

INST997316