99-8721B - Kit voiture Metra - Free user manual and instructions

USER MANUAL 99-8721B Metra

INSTALLATION INSTRUCTIONS FOR PART 99-8721B

APPLICATIONS

Mercedes-Benz C-Class 2005-2007 99-8721B

KIT FEATURES

• ISO DIN radio provision with pocket
- Painted matte black

Interior view of a car dashboard with air vent and control knobs (no visible text or symbols)

KIT COMPONENTS

• A) Radio Housing Trim Panel • B) Brackets • C) Pocket • D) (8) #8 x 3/8" Phillips Screws

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: • XSVI-9005-NAV

Antenna Adapter: • 40-EU10

TOOLS REQUIRED

- Panel removal tool - Phillips screwdriver - Socket Wrench - Torx driver

Table of Contents

Dash Disassembly

- Mercedes-Benz C-Class 2005-2007 ....2-3

Kit Assembly

- ISO DIN radio provision.... 3

CAUTION: Metra recommends disconnecting the negative battery terminal before beginning any installation. All accessories, switches, and especially air bag indicator lights must be plugged in before reconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the aftermarket radio.

99-8721B

Dash Disassembly

1. Unclip and remove cover around shift lever and cup holder. (Figure A)
2. Unclip and remove ashtray assembly. (Figure B)
3. Remove (2) Torx screws from the bottom of the climate control unit then remove the unit. (Figure C)

Diagram of a car intake manifold showing lever and vent slots (no text or symbols)

(Figure A)

Interior view of a car gear shift lever with directional arrows indicating motion (no text or symbols)

(Figure B)

Close-up of a mechanical device's internal components, possibly a pump or lever mechanism (no visible text or symbols)

(Figure C)

1. Inside each vent, using a small flat screwdriver push the lower tab inward toward the center of the vent and then rotate each vent up to expose (1) Torx head screw. Loosen the Torx screws (It is not

necessary to remove the screws.) Push the upper clip inward and rotate the vent downward to expose (1) spring clip in the top of the vent assembly. (Figure D)

Continued on next page

Diagram showing four variations of a car interior with directional arrows indicating movement or change, likely illustrating vehicle dynamics or airflow patterns.

(Figure D)

99-8721B

Dash Disassembly

1. Unclip and remove the vent assembly. (Figure E)
2. Unclip and remove the push button panel above the radio (Figure F)
3. Remove (4) Torx screws securing factory radio then remove the unit. (Figure G)
4. Remove the two metal clips on the bottom of the factory radio and place them on the bottom tabs of the radio housing trim panel.

Continue to kit assembly

Diagram of a car air conditioner unit with airflow arrows indicating airflow direction (no text or symbols)

(Figure E)

Diagram of a car dashboard with control panel and directional arrow (no text or symbols)

(Figure F)

Diagram of a car interior with directional arrows indicating movement or navigation (no text or symbols present)

(Figure G)

Kit Assembly

ISO DIN radio provision with pocket

1. Mount the pocket to the radio brackets with the (4) #8 x 3/8" Phillips screws supplied. (Figure A)
2. Mount the bracket/pocket assembly to the radio housing trim panel with the included #8 screws. (Figure B)
3. Slide the radio into radio brackets and secure with screws supplied with the unit. (Figure C)
4. Locate the factory wiring harness and antenna plug in the dash. Metra recommends using the proper mating adapters from Metra and/or AXXESS.
5. Mount the new radio assembly into the dash and reassemble dash in reverse order of disassembly.

Technical line drawing of a mechanical assembly with labeled components (no text or symbols present)

(Figure A)

Technical line drawing of a mechanical housing or enclosure with mounting brackets and a central frame (no text or symbols)

(Figure B)

Technical line drawing of a car air conditioner unit with no visible text or symbols

(Figure C)

INSTALLATION INSTRUCTIONS FOR PART 99-8721B

KNOWLEDGE IS POWER

Enhance your installation and fabrication skills by enrolling in the most recognized and repurposed.

enrolling in the most recognized and resp. mobile electronics school in our industry.

Log onto www.installerinstitute.com or call

800-354-6782 for more information and take steps toward a better tomorrow.

Metra recommends MECP

certified technicians

Interior view of a car dashboard with air vent and control knobs (no visible text or symbols)

COMPONENTES DEL KIT

Diagram of a car intake manifold showing lever and vent slots (no text or symbols)

(Figura A)

Diagram of a car gear shift lever with directional arrows indicating motion (no text or symbols)

(Figura B)

Close-up of a mechanical control panel with no visible text or symbols

(Figura C)

Four-panel diagram showing vehicle interior compartments with directional arrows indicating movement or flow (no text or symbols)

(Figura D)

99-8721B

Diagram of a car dashboard with airflow indicators and control panel (no text or symbols)

(Figura E)

Diagram of a car dashboard with control panel and directional arrow (no text or symbols)

(Figura F)

Diagram of a vehicle's front view showing dashboard, steering wheel, and steering wheel (no text or labels)

(Figura G)

Technical line drawing of a mechanical component with labeled dimensions (no text or symbols present)

(Figura A)

Technical line drawing of a mechanical housing or enclosure with mounting brackets and a central frame (no text or symbols)

(Figura B)

Technical line drawing of a car air vent assembly (no text or symbols)

(Figura C)