CE-H23N11-S1 - Audio/Video Accessories Siig - Free user manual and instructions

Product Type	HDMI Extender over Cat5e/6
Brand	Siig
Model	CE-H23N11-S1
Category	Audio/Video Accessories
Dimensions (Transmitter)	85 x 55 x 20 mm
Dimensions (Receiver)	85 x 55 x 20 mm
Weight (each unit)	100 g
Power Supply	5V DC via micro USB (adapter included)
Power Consumption	2.5 W (each unit)
Supported Resolution	1080p@60Hz (up to 4K@30Hz with reduced range)
Maximum Transmission Distance	60 m for 1080p, 35 m for 4K
Video Input/Output	HDMI Type A (female)
Ethernet Connection	RJ-45 (Cat5e/6)
HDCP Support	HDCP 1.4
EDID Pass-through	Yes
Audio Support	Stereo LPCM, Dolby Digital, DTS
Operating Temperature	0°C to 50°C
Storage Temperature	-20°C to 60°C
Maintenance	Wipe with dry soft cloth; avoid liquids
Safety	Low voltage device; keep away from moisture
Spare Parts & Repairability	No user-serviceable parts; contact Siig support

Frequently Asked Questions - CE-H23N11-S1 Siig

How do I connect the Siig CE-H23N11-S1 extender?

Connect the transmitter to your source (HDMI out) and the receiver to your display. Use a Cat5e/6 cable between the two units. Power both via micro USB.

What is the maximum resolution supported?

It supports up to 1080p@60Hz over 60m, and up to 4K@30Hz over 35m.

Does the extender require an external power supply?

Yes, both the transmitter and receiver need 5V DC via micro USB. Adapters are included.

Can I use a regular Ethernet cable?

It is recommended to use Cat5e or Cat6 solid or stranded cable for best performance. Shielded cable may be needed in high-interference environments.

Is HDCP supported?

Yes, the extender supports HDCP 1.4 for protected content.

What audio formats are supported?

The extender passes stereo LPCM, Dolby Digital, and DTS audio formats.

How do I troubleshoot if there is no picture?

Check all connections, ensure both units are powered, verify that the Ethernet cable is properly terminated and not too long. Try a different source or display.

Can I cascade multiple extenders?

Cascading is not supported by this model. For longer distances, consider a different product.

Does the unit get hot during operation?

The extender may become warm to the touch, but it is normal. Ensure proper ventilation.

Where can I find the user manual?

The user manual is available for free download on notice-facile.com in PDF format.

USER MANUAL CE-H23N11-S1 Siig

Red circular logo with a white abstract line design (no text or symbols)

SIIG®

HDMI 2.0 4K HDR

Pattern Generator/Analyzer

User Manual

DC 12V ETHERNET F/W STEREO Out HDMI In HDMI Out 0.0.0.0 |1920x1080p60Hz|RGB |12bit OUTPUT SETTING TEST SYSTEM SIIG® 4K HDR

Safety and Notice

Please read all of these instructions carefully before you use the device. Save this manual for future reference.

The HDMI 2.0 Pattern Generator / Analyzer has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, the should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.

• Follow all instructions and warnings marked on this unit.
• Do not attempt to service this unit yourself, except where explained in this manual.
• Provide proper ventilation and air circulation and do not use near water.
• Keep objects that might damage the device and assure that the placement of this unit is on a stable surface.
• Use only the power adapter and power cords and connection cables designed for this unit.
• Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.

Thank You for your purchase!

Features

• 4K2K60 4:4:4 8bit, 4K2K60 4:2:0 16bit HDR pattern generator
- 4.3" touch panel
• Supports mouse control
• Supports user control device through Ethernet
- Firmware update through USB Flash Drive
• Supports user defined pattern up to 2GB
- Embedded LINUX KERNAL system with limitless extension
- Scrambler supported for videos over 340MHz output wise
- Loop test capability to provide statistical analysis for connection stability
• Supports HDMI loop through function
- HDCP test allow verify HDCP of HDMI source and transmit HDCP encrypted video
- Qualified physical layer performance to ensure the best compatibility
- Battery powered for portability, it can extend operation time with full load up to 4 hours
- Rechargeable battery design with short charging time about 2 hours.

Package contents

• HDMI 2.0 4K HDR Pattern Generator/Analyzer
• Power adapter DC 12V / 5A
- User Manual

Notes:

Before using the Generator/Analyzer, please plugging the power adapter to switch off the shipping mode.

Layout

1 2 3 4 5 6 7 8

1. OUTPUT: HDMI output
2. INPUT: HDMI input
3. Stereo Out: Analog audio output
4. USB: Connect to USB device for control or firmware update
5. Ethernet: Ethernet control
6. +12V DC: 12V 5A DC power jack
7. Power Switch: Power ON/OFF switch
8. Touch Panel: Touch screen for control

Menu Operation

The major functions of the device are listed below

• HDCP Test
  • EDID Test
• Loop Test

- HDMI Generator

- HDMI Receiver

Please refer the table below and the following section to know how to operate these functions.

Output Setting Description
Signal Format	Type	select the HDMI/DVI signal type information (color space and color depth)
	Resolution	setting the TV/PC resolution and frequency
Video Pattern	Default	multiple patterns to test HDMI device, it also provides user to set the timer and moving squares
	Album
PCM Audio Tone	Mute mute	/ unmute the PCM audio
	Tone	for user setting the audio information to test audio on HDTV or other A/V receivers
Test Setting Description
Source	Format read format information from source
	Video	provide small screen for user to check the video information and also provide video pass through to the display
	Audio read audio information
	Packet read packet
	HDCP enable HDCP function (1.4/2.0)
Sink	EDID EDID analyzer or learn EDID from RX
	HDCP HDCP test

System Description
Preference	Screen Brightness adjust the screen brightness
	BEEP ON/OFF system sound
Ethernet	DHCP
	Static IP
Firmware upgrade the firmware

Generator

AIDS S11TSI HDMI CABLE Flat Panel Display

After making the physical connections between Generator and the display device. User can select different generator function to display on the sink device under test.

1. Selecting the Signal Format

Generator provides different signal resolution and signal types for user to select. User can touch the Signal Format Tab to select the signal type (HDMI / DVI) and signal resolution (HDTV / PC). The HDTV resolution is up to 4K2K 60Hz and PC resolution is up to 1920x1200 60Hz

2. Rendering Test Patterns on an HDTV

Generator provides multiple test patterns for user select to test HDTV. User can select the desired test pattern from the video pattern menu.

3. User Defined Pattern

Besides the embedded test patterns, Generator also provides user defined patterns function for user to use custom test image. More details please see the Upgrade Generator section.

1. Testing Digital Audio on an HDTV or A/V Receiver

The PCM Audio Tone menu provides user for test audio on HDTV or other A/V receivers. In the PCM SINE WAVE menu, user can set up the bits per sample, sample rate, level and audio channel.

1. Testing HDCP on an HDMI TV or HDMI device

Generator provides user to test HDCP on an HDMI equipped HDTV. For more details please see the HDCP test section.

Receiver

Blu-ray Player HDMI CABLE

1. Source Information from the HDMI source

In the Test/Source menu, user can touch the read/refresh button to get the video format, source audio and packet information from the HDMI source device.

1. Testing the Video from the HDMI source

Receiver supports the incoming video from HDMI source/device to ensure user is receiving a valid video signal by displaying the

information of incoming signal. The video information also will

inform user whether the HDCP is encrypted or not. Return to Video menu by touching the touch panel (please stay at least 5 seconds).

HDCP Test

- HDCP Receiver

When device set as receiver, it can verify HDCP of video player or other DUT. It provides three options (HDCP 1.4 / HDCP 2.2 / no HDCP) for users to select and confirm the HDCP authentication of DUT.

- HDCP Transmitter

When device set as transmitter, it can transmit HDCP encrypted video. It also provides three modes (HDCP 1.4 / HDCP 2.2 / no HDCP) for you to select. If user wants to transmit HDCP encrypted video again, please select the Auto-Restart button.

Procedure for Testing HDCP:

1. Make the connection between the device HDMI output port and the display.
2. Select HDCP Test from the Sink Test Menu.
3. Touch Enable HDCP 1.4 or Enable HDCP 2.2 button.

EDID Analysis

CAT 5/5e6 DUT HDMI Input DUT HDMI Output HDMI CABLE .HDMI CABLE

• Procedure of EDID Analyze:

1. Make sure the connections between the device HDMI output port and the device.

2. Select EDID Analyze from the Sink Test Menu.

3. Touch the Read button to get the EDID information of DUT.

• Procedure of learning EDID from RX:

1. Make sure the connections between the device HDMI output port and the device.

2. Select EDID Analyze from the Sink Test Menu.

3. Touch the Learn from RX button to learn the EDID. The EDID will be saved in the device input port.

Loop Test

Device offers the unique estimator for evaluating the quality of cables or DUT. Users can simply connect the cable or DUT to device to form a loop, the monitor will examine the HDMI bitstream pixel by pixel. The measurement statistics will be displayed on screen and offer useful information for building up robust A/V system.

CAT 5/5e6 DUT HDMI Input DUT HDMI Output HDMI CABLE HDMI CABLE

Procedure of Loop Test: *only support 1080p@60, 4K2K 30Hz and 4K2K 60Hz resolution

1. Make sure the connection between the PRO-HDMI2Gen and the DUT or cables.

2. Select Loop Test from the Loop Test Menu.

3. Set the test time and touch the START button. The device will capture the signal from its transmitter through the loop and evaluate the transmission quality.

4. The user interface of device will be locked until testing terminated. Unless user wants to break off the test.

5. Judgement criteria:

Result Definition

Pass The value of Bit Error Rate is less than 1

* Plugging HDMI Cable Will Influence The Testing Result, So Please Settle Down The Connection Before Starting Running Test.

Ethernet Control (Tcp/lp)

Device also provides user control through Ethernet. The Ethernet control includes many major functions, it can offer user develop software to do advance setting. (TCP Port: 6133)

Reply Format:

Received = ACK + Feedback Date

ACK: 0xaa 0xbb 0xcc

Feedback Date: Data0 Data1 Data2....

Command Set:

* Bold word part please refer to corresponding table

COMMAND ACTION RAMARK
0x4d 0x53 0x5 0x0 0x0 0x5 0x1 Res Set output resolution		Hexadeci-mal
0x4d 0x53 0x5 0x0 0x0 0x5 0x2 Set output resolution
0x4d 0x53 0x5 0x0 0x0 0x5 0x3 Mode Set output mode
0x4d 0x53 0x5 0x0 0x0 0x5 0x4 Set output mode
0x4d 0x53 0x5 0x0 0x0 0x5 0x5 Depth Set output color depth
0x4d 0x53 0x5 0x0 0x0 0x5 0x6 Set output color depth
0x4d 0x53 0x5 0x0 0x0 0x5 0x7 Pattern Set default pattern		Hexadeci-mal
0x4d 0x53 0x5 0x0 0x0 0x5 0x8 Pattern Set user pattern		Hexadeci-mal
0x4d 0x53 0x5 0x0 0x0 0x5 0x9 Mute Set audio mute
0x4d 0x53 0x5 0x0 0x0 0x5 0xa Get audio mute status
0x4d 0x53 0x5 0x0 0x0 0x5 0xb Length Set audio length
0x4d 0x53 0x5 0x0 0x0 0x5 0xc Get audio length
0x4d 0x53 0x5 0x0 0x0 0x5 0xd Level Set audio level
0x4d 0x53 0x5 0x0 0x0 0x5 0xe Set audio level
0x4d 0x53 0x5 0x0 0x0 0x5 0xf Rate Set audio sample rate
0x4d 0x53 0x5 0x0 0x0 0x5 0x10 Set audio sample rate
0x4d 0x53 0x5 0x0 0x0 0x5 0x11 Number	Get audio channel number
0x4d 0x53 0x5 0x0 0x0 0x5 0x12 Get audio channel number
0x4d 0x53 0x5 0x0 0x0 0x5 0x13 HDCP Set TX HDCP on/off

Resolution:

Index Resolution Index Resolution
0x0 720x480i@60 0x1c 1280x1024p@75
0x1 720x576i@50 0x1d 1360x768p@60
0x2 720x480p@60 0x1e 1366x768p@60
0x3 720x576p@50 0x1f 1400x1050p@60
0x4 1280x720p@60 0x20 1600x1200p@60
0x5 1280x720p@59.94 0x21 1440x900p@60
0x6 1280x720p@50 0x22 1440x900p@75
0x7 1280x720p@30 0x23 1680x1050p@60
0x8 1280x720p@29.97 0x24 1680x1050pRB
0x9 1280x720p@25 0x25 1920x1080pRB
0xa 1920x1080i@60 0x26 1920x1200pRB
0xb 1920x1080i@59.94	0x27	3840x2160p@60
0xc 1920x1080i@50 0x28 3840x2160p@59.94
0xd N/a	0x29	3840x2160p@50
0xe 1920x1080p@59.94	0x2a	3840x2160p@30
0xf 1920x1080p@50	0x2b	3840x2160p@29.97
0x10 1920x1080p@30 0x2c 3840x2160p@25
0x11 1920x1080p@29.97	0x2d	3840x2160p@24
0x12 1920x1080p@25	0x2e	3840x2160p@23.976
0x13 1920x1080p@24 0x2f 1920x1080p@60
0x14 1920x1080p@23.976	0x30	4096x2160p@60
0x15 640x480p@60 0x31 4096x2160p@59.94
0x16 640x480p@75 0x32 4096x2160p@50
0x17 800x600p@60 0x33 4096x2160p@30
0x18 800x600p@75 0x34 4096x2160p@29.97
0x19 1024x768p@60 0x35 4096x2160p@25
0x1a 1024x768p@75 0x36 4096x2160p@24

Mode:

Index 0x0 0x1 0x2 0x3

0x4

Depth:

Index 0x0 0x1 0x2 0x3

Default Pattern:

Index	Default Pattern Index Default	Pattern
0x0 SM	M PTE BAR 0x18 Stair White 1
0x1 TV	Bar 100% 0x19 Stair White 2
0x2 TV	Bar 75% 0x1a Red 100
0x3 Checkfield	0x1b Green 100
0x4 EQ	0x1c Blue 100
0x5 PLL	0x1d White 100
0x6 Ramp	Red H 1 0x1e Gray 70
0x7 Ramp	Green H 1 0x1f Gray 40
0x8 Ramp	Blue H 1 0x20 Black
0x9 Ramp	Red H 2 0x21 Noise
0xa Ramp	Green H 2 0x22 Circle 1
0xb	Ramp Blue H 2	0x23 Circle 2
0xc	Ramp Black to Red V	0x24 Moire
0xd Ramp	Green V 1 0x25 V Stripe Red
0xe	Ramp Blue V 1	0x26 V Stripe Green
0xf	Ramp Red V 2	0x27 V Stripe Blue
0x10 Ramp	Green V 2 0x28 H Stripe Red
0x11 Ramp	Blue V 2 0x29 H Stripe Green
0x12 Stair	Red 1 0x2a H Stripe Blue
0x13 Stair	Red 2 0x2b Chess 1
0x14 Stair	Green 1 0x2c Chess 2

User Pattern:

Index D	Default Pattern Index Default	Pattern
0x0 Ph	lips 0xf Graybar32 R-2
0x1 Checker	3x3 0x10 Graybar32 G-2
0x2 Checker	6x6-1 0x11 Graybar32 B-2
0x3 Checker	6x6-2 0x12 Graybar32 W-2
0x4 White	75 0x13 Graybar64 R-1
0x5 White	50 0x14 Graybar64 G-1
0x6 White	25 0x15 Graybar64 B-1
0x7 Ramp	W-1 0x16 Graybar64 W-1
0x8 Ramp	W-2 0x17 Graybar64 R-2
0x9 Ramp	W-3 0x18 Graybar64 G-2
0xa Ramp	W-4 0x19 Graybar64 B-2
0xb Graybar32 R-1	0x1a Graybar64 W-2
0xc Graybar32 G-1	0x1b User Add.

Mute:

Index	0x0	0x1
Mute	OFF	ON

Length:

Index

0x0

0x1

0x2

Level:

In-dex

0x0 0x1

0x2 0x3

0x4 0x5

0x6 0x7

Rate:

Index

0x0

0x1

0x2

0x3

0x4

Number:

Index 0x0 0x1 0x2 0x3 0x4

TX HDCP:

Index 0x0 0x1 0x2 0x3

RX HDCP:

Index 0x0 0x1 0x2 0x3

Upgrade Device

User can upgrade the firmware and pattern on the device through the USB interface. If user encounters a problem with the upgrade, please contact the supplier.

Procedure of Firmware Upgrade:

*Before updating the firmware, please ensure the file of new firmware files are in the root directory of USB Flash Drive. The file suffix is .dat.

System

1. Make sure the gui.dat and sysyem.dat files are in the root directory of USB.
2. Connect the USB Flash Drive on PRO-HDMI2Gen USB interface.
3. Select Firmware button from the System Menu and choose the GUI button.

4. Touch the Update button to do firmware update. The process of firmware update will take about 3\~5 seconds. While updating, please do not remove the USB Flash Drive.

5. After completing the firmware update, please reboot the device

6. Select Firmware from the system Menu and choose the System button.

7. Touch the Update button to do firmware update. The process of firmware update will take about 3\~5 seconds. While updating, please do not remove the USB Flash Drive.

8. After completing the firmware update, please reboot the device.

ARM

1. Make sure the arm.dat file is in the root directory of USB.
2. Connect the USB Flash Drive on device USB interface.
3. Select Firmware from the System Menu and choose the ARM button.
4. Touch the Update button to do firmware update. The process of firmware update will take about 5\~10 seconds. While updating, please do not remove the USB Flash Drive.

FPGA

1. Make sure the fpga.dat file is in the root directory of USB.
2. Connect the USB Flash Drive on device USB interface.
3. Select Firmware from the System Menu and choose the FPGA button.
4. Touch the Update button to do firmware update. The process of firmware update will take about 5\~10 seconds. While updating, please do not remove the USB Flash Drive

Pattern

1. Create a folder (folder name is usr_pic) on USB Flash Drive.
2. Ensure the file of pattern which user desire to update on the device is in the usr_pic directory of USB Flash Drive. The file suffix is .jpg.
3. Before updating the user defined pattern, please confirm the capacity of the PRO-HDMI2Gen.
4. Select Firmware from the System Menu and choose the Pattern button.
5. Touch the Update button to upgrade the user defined pattern. The process running time will depend on the file size, please wait patiently.

Abstract grayscale shape resembling a stylized letter 'S' or wave (no text or symbols)

Support

For more info or tech support

http://www.siig.com/support

August, 2018 Copyright © 2018 by SIIG, Inc. All rights reserved.