iFlex i1730 - Multimeter FLUKE - Free user manual and instructions

USER MANUAL iFlex i1730 FLUKE

To register your product, or to view, print, or download the latest manual or manual supplement go to our website: www.fluke.com

A Warning identifies hazardous conditions and procedures that are dangerous to the user.

Warning

To prevent possible electrical shock, fire, or personal injury:

• Read all safety information before you use the Product.
• Use the Product only as specified, or the protection supplied by the Product can be compromised.
• Comply with local and national safety codes. Use personal protective equipment (approved rubber gloves, face protection, and flame-resistant clothes) to prevent shock and arc blast injury where hazardous live conductors are exposed.
• Do not use the Product around explosive gas, vapor, or in damp or wet environments.

• Do not touch voltages >30 V ac rms, 42 V ac peak, or 60 V dc.

• De-energize the circuit or wear personal protective equipment in compliance with local requirements before you apply or remove the Product.

• Do not use the Product if it is damaged.
• Do not use the Product if it operates incorrectly.
• Before each use, examine the Product. Look for cracks or missing pieces of the clamp housing or output cable insulation. Also look for loose or weakened components. Carefully examine the insulation around the jaws.
• Do not use the Flexible Current Probe if it has damaged insulation, exposed metal, or if the wear indicator is visible.
• Do not use a current measurement as an indication that a circuit is safe to touch. A voltage measurement is necessary to know if a circuit is hazardous.
• Have an approved technician repair the Product.
• Remove the input signals before you clean the Product.

Specifications

Safety ....IEC 61010-1: Pollution degree 2 IEC 61010-2-032: CAT IV 600 V, CAT III 1000 V

Temperature

Operating ....-20 °C to 70 °C (-4 °F to 158 °F) Temperature of conductor under test shall not exceed 80 °C (176 °F)

Storage ....-40 °C to 80 °C (-40 °F to 176 °F)

Altitude

Operating 2000 m

Storage 12 000 m

Symbols

The table below is a list of the symbols that can be used on the Product or in this document.

Symbol Description
	Consult user documentation.
	WARNING. RISK OF DANGER.
	WARNING. HAZARDOUS VOLTAGE. Risk of electric shock.
	Double insulation
	Measurement Category II is applicable to test and measuring circuits connected directly to utilization points (socket outlets and similar points) of the low voltage MAINS installation.
	Measurement Category III is applicable to test and measuring circuits connected to the distribution part of the building's low-voltage MAINS installation.
	Measurement Category IV is applicable to test and measuring circuits connected at the source of the building's low-voltage MAINS installation.
CE	Conforms to European Union directives.
	This product complies with the WEEE Directive marking requirements. The affixed label indicates that you must not discard this electrical/electronic product in domestic household waste. Product Category: With reference to the equipment types in the WEEE Directive Annex I, this product is classed as category 9 "Monitoring and Control Instrumentation" product. Do not dispose of this product as unsorted municipal waste.

LIMITED WARRANTY AND LIMITATION OF LIABILITY

This Fluke product will be free from defects in material and workmanship for one year from the date of purchase. This warranty does not cover fuses, disposable batteries, or damage from accident, neglect, misuse, alteration, contamination, or abnormal conditions of operation or handling. Resellers are not authorized to extend any other warranty on Fluke's behalf. To obtain service during the warranty period, contact your nearest Fluke authorized service center to obtain return authorization information, then send the product to that Service Center with a description of the problem.

THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES, SUCH AS FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSED OR IMPLIED. FLUKE IS NOT LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR THEORY. Since some states or countries do not allow the exclusion or limitation of an implied warranty or of incidental or consequential damages, this limitation of liability may not apply to you.

11/99