MF 6890 N - Multifunction Printer SAGEM - Free user manual and instructions

Product Type	Multifunction printer (fax, copier, scanner, printer)
Brand	SAGEM
Model	MF 6890 N
Dimensions (H x W x D)	783 x 457 x 586 mm (without options)
Weight	40 kg
Power Supply	220-240 V, 50/60 Hz, 6.3 A
Power Consumption	Standby: <30 W, Idle: <80 W, Operating: 580 W (peak 987 W)
Main Functions	Fax (G3 33.6 kbps), copier (duplex), scanner (600 dpi, duplex), color laser printer 16 ppm, SMS, Internet (fax to email, email, SMS), LAN 10/100 Base T, memory card reader and USB
Print Resolution	600 dpi
Print Speed	16 pages/min (A4, color or B&W, multiple copies of the same page)
Paper Capacity	Cassette: 500 sheets (80 g/m²), Multifunction tray: 100 sheets (80 g/m²)
Accepted Paper Sizes	Cassette: A5 to A4/Legal; Multifunction tray: 70 x 148 mm to 216 x 297 mm
Paper Weight	Tray: 60-105 g/m²; Multifunction tray: 60-200 g/m²
Scanner Type	CIS, 600 dpi, 50-page document feeder
Connectivity	USB 2.0, Ethernet 10/100 Base Tx, parallel Centronics
Duplex Printing	Automatic (with optional module)
Emulations	PCL 6, KPDL/SG Script (PostScript level 3 emulation)
Memory	128 MB (expandable to 1024 MB)
Maintenance and Cleaning	Clean outside with a soft cloth; replace toner cartridges and waste toner box; calibrate scanner (menu 80).
Safety	Class 1 laser; mandatory grounding; do not open fixed covers; immediate stop if smoke or odor.
Spare Parts and Repairability	Standard toner cartridges (8000 pages, 5% coverage), waste toner box; consumables available from dealer; repair by qualified technician.
General Information	Conforms to European standards; CE marking; recommended monthly volume: 10,000 pages.

Frequently Asked Questions - MF 6890 N SAGEM

How to load paper into the cassette?

Remove the cassette, fan the paper stack, then adjust the side guides and stop. Place the paper under the tabs and insert the cassette until it clicks. Use paper 60 to 105 g/m² in the cassette, and up to 200 g/m² in the multifunction tray.

How to replace a toner cartridge?

Open the top cover, remove the empty cartridge. Shake the new cartridge horizontally 5 to 6 times, insert it aligning the marks upwards, then push until it clicks. Flip the blue locking lever to the closed position. Close the cover.

What to do in case of a paper jam?

The screen displays the jam location. Open the relevant cover, gently pull the jammed paper avoiding tearing. For a jam in the printer, remove the cassette and transfer unit. Consult help messages by pressing the '?' key on the control panel.

How to connect the printer to the local network?

Plug the Ethernet cable into the LAN port of the scanner and the printer (each part has its own connection). Configure the IP address via the menu SETTINGS / NETWORKS / LOCAL NETWORK. You can use DHCP or a fixed address.

How to send a fax?

Place the document face up in the feeder or on the glass. Press the Fax key (or menu 31), dial the number, then confirm. For deferred transmission, use the ECO TRANSMISSION menu (32) with an economical time slot.

How to use the Scan to Email function?

Place the document, then press the @ key (scan to e-mail). If the ISP is configured (menu 91), you can send the scan directly to an email address entered in the directory.

How to print from a USB drive or memory card?

Insert the media into the dedicated reader. From the screen, select the MEDIA menu (10) then PRINT PHOTO or PRINT DOC.. Navigate to choose the file and confirm.

How to set the date and time?

Go to SETTINGS / DATE/TIME / CHANGE (menu 211 OK). Enter the date and time in format DDMMYYHHMM (e.g., 0811050933 for November 8, 2005 at 9:33 am). You can activate automatic summer/winter change via AUTO ADJUST.

What to do if the screen displays 'Insufficient memory'?

Delete unnecessary downloaded fonts or macros. You can also disable the page protection mode from the printer control panel. If the problem persists, reduce print resolution or add more RAM (expandable to 1024 MB).

How to activate duplex printing for received faxes?

The duplex module must be installed. Go to SETTINGS / RECEPTION / DUPLEX (menu 244 OK) and select DUPLEX. Confirm with OK. All received faxes will then be printed duplex.

USER MANUAL MF 6890 N SAGEM

Boites aux lettres (BAL FAX) 5-34

Sagem Communication - Customer relations department

CONDITIONS D'EMPLACEMENT

$$ M E N U - \vee - I N T e r F A C E > - \vee - T C P / I P > D H C P $$

Activer le reroutage

391 OK - TELECOPIE / REROUTAGE / ACTIVATION

Retirer le support mémoire

The device you have purchased contains one or more software programs ("Programs") which belong to international business machines corporation ("IBM"). This document defines the terms and conditions under which the software is being licensed to you by IBM. If you do not agree with the terms and conditions of this license, then within 14 days after your acquisition of the device you may return the device for a full refund. If you do not so return the device within the 14 days, then you will be assumed to have agreed to these terms and conditions.

The Programs are licensed not sold. IBM, or the applicable IBM country organization, grants you a license for the Programs only in the country where you acquired the Programs. You obtain no rights other than those granted you under this license.

The term "Programs" means the original and all whole or partial copies of it, including modified copies or portions merged into other programs. IBM retains title to the Programs. IBM owns, or has licensed from the owner, copyrights in the Programs.

License

Under this license, you may use the Programs only with the device on which they are installed and transfer possession of the Programs and the device to another party.

If you transfer the Programs, you must transfer a copy of this license and any other documentation to the other party. Your license is then terminated. The other party agrees to these terms and conditions by its first use of the Program.

You may not:

1) use, copy, modify, merge, or transfer copies of the Program except as provided in this license;
2) reverse assemble or reverse compile the Program; or
3) sublicense, rent, lease, or assign the Program.

Limited Warranty

The Programs are provided "AS IS."

There are no other warranties covering the Programs (or conditions), express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.

Some jurisdictions do not allow the exclusion of implied warranties, so the above exclusion may not apply to you.

Limitation of Remedies

IBM's entire liability under this license is the following;

1) For any claim (including fundamental breach), in any form, related in any way to this license, IBM's liability will be for actual damages only and will be limited to the greater of:
a) the equivalent of U.S.$25,000 in your local currency; or
b) IBM's then generally available license fee for the Program

This limitation will not apply to claims for bodily injury or damages to real or tangible personal property for which IBM is legally liable.

IBM will not be liable for any lost profits, lost savings, or any incidental damages or other economic consequential damages, even if IBM, or its authorized supplier, has been advised of the possibility of such damages. IBM will not be liable for any damages claimed by you based on any third party claim. This limitation of remedies also applies to any developer of Programs supplied to IBM. IBM's and the developer's limitations of remedies are not cumulative. Such developer is an intended beneficiary of this Section. Some jurisdictions do not allow these limitations or exclusions, so they may not apply to you.

General

You may terminate your license at any time. IBM may terminate your license if you fail to comply with the terms and conditions of this license. In either event, you must destroy all your copies of the Program. You are responsible for payment of any taxes, including personal property taxes, resulting from this license. Neither party may bring an action, regardless of form, more than two years after the cause of action arose. If you acquired the Program in the United States, this license is governed by the laws of the State of New York. If you acquired the Program in Canada, this license is governed by the laws of the Province of Ontario.

Otherwise, this license is governed by the laws of the country in which you acquired the Program.

Typeface Trademark Acknowledgement

All resident fonts in this printer are licensed from Agfa Corporation.

Helvetica, Palatino and Times are registered trademarks of Linotype-Hell AG.

ITC Avant Garde Gothic, ITC Bookman, ITC ZapfChancery and ITC Zapf Dingbats are registered trademarks of International Typeface Corporation.

Agfa Japan License Agreement

1. "Software" shall mean the digitally encoded, machine readable, scalable outline data as encoded in a special format as well as the UFST Software.

2. You agree to accept a non-exclusive license to use the Software to reproduce and display weights, styles and versions of letters, numerals, characters and symbols ("Typefaces") solely for your own customary business or personal purposes at the address stated on the registration card you return to Agfa Japan. Under the terms of this License Agreement, you have the right to use the Fonts on up to three printers. If you need to have access to the fonts on more than three printers, you need to acquire a multi-user license agreement which can be obtained from Agfa Japan. Agfa Japan retains all rights, title and interest to the Software and Typefaces and no rights are granted to you other than a License to use the Software on the terms expressly set forth in this Agreement.

3.To protect proprietary rights of Agfa Japan, you agree to maintain the Software and other proprietary information concerning the Typefaces in strict confidence and to establish reasonable procedures regulating access to and use of the Software and Typefaces.
4. You agree not to duplicate or copy the Software or Typefaces, except that you may make one backup copy. You agree that any such copy shall contain the same proprietary notices as those appearing on the original.
5. This License shall continue until the last use of the Software and Typefaces, unless sooner terminated. This License may be terminated by Agfa Japan if you fail to comply with the terms of this License and such failure is not remedied within thirty (30) days after notice from Agfa Japan. When this License expires or is terminated, you shall either return to Agfa Japan or destroy all copies of the Software and Typefaces and documentation as requested.
6. You agree that you will not modify, alter, disassemble, decrypt, reverse engineer or decompile the Software.
7.Agfa Japan warrants that for ninety (90) days after delivery, the Software will perform in accordance with Agfa Japan-published specifications, and the diskette will be free from defects in material and workmanship. Agfa Japan does not warrant that the Software is free from all bugs, errors and omissions.
The parties agree that all other warranties, expressed or implied, including warranties of fitness for a particular purpose and merchantability, are excluded.
8. Your exclusive remedy and the sole liability of Agfa Japan in connection with the Software and Typefaces is repair or replacement of defective parts, upon their return to Agfa Japan.
In no event will Agfa Japan be liable for lost profits, lost data, or any other incidental or consequential damages, or any damages caused by abuse or misapplication of the Software and Typefaces.
9.New York, U.S.A. law governs this Agreement.
10. You shall not sublicense, sell, lease, or otherwise transfer the Software and/or Typefaces without the prior written consent of Agfa Japan.
11.Use, duplication or disclosure by the Government is subject to restrictions as set forth in the Rights in Technical Data and Computer Software clause at FAR 252-227-7013, subdivision (b)(3)(ii) or subparagraph (c)(1)(ii), as appropriate. Further use, duplication or disclosure is subject to restrictions applicable to restricted rights software as set forth in FAR 52.227-19 (c)(2).
12. You acknowledge that you have read this Agreement, understand it, and agree to be bound by its terms and conditions. Neither party shall be bound by any statement or representation not contained in this Agreement. No change in this Agreement is effective

unless written and signed by properly authorized representatives of each party. By opening this diskette package, you agree to accept the terms and conditions of this Agreement.

SECURITE

CONSIGNES DE SECURITÉ

SAGEM Communication - Customer relations department 4 rue du Petit Albi - 95800 Cergy Saint-Christophe - FRANCE