GoPure Style GP561SLVX1 - Air purifier PHILIPS - Free user manual and instructions

Product Type	Car Air Purifier
Brand	Philips
Model	GoPure Style GP561SLVX1
Power Supply	USB Type-C, 5V / 1A minimum
Fan Speed Settings	Low and High
Air Purification Technology	Pre-filter, HEPA filter, HESAMax cartridge, UVC LED sterilization
Filter Replacement Indicator	Blue light ring blinks on startup when filter needs replacement
Auto Shut-off	After 2 hours of continuous operation (battery saving)
Recommended HESAMax Replacement	Every 12 months (depends on odor level)
UVC LED	Yes, for sterilization (do not disassemble)
Installation	Place in car cup holder; connect to USB charging port
Safety Features	Do not expose to liquids; keep away from children; do not cover
Cleaning Method	Wipe with a soft dry cloth only; do not use liquids
Package Contents	Air purifier, USB Type-C cable, user manual
Warranty	Lumileds warranty applies; original invoice required
Customer Support	www.philips.com/automotive; China hotline: [phone]

Frequently Asked Questions - GoPure Style GP561SLVX1 PHILIPS

How do I know when to replace the filter?

The blue light ring on top of the purifier will blink every time it is turned on when the filter needs replacement. Follow the reset procedure after installing a new filter.

How do I reset the filter replacement timer?

Open the filter cover, power on the purifier, then press and hold the ON/OFF button for more than 5 seconds until you hear 'ding ding'. Release to reset. Close the cover and reattach the base.

Can I use the purifier without the HESAMax cartridge?

The HESAMax cartridge is essential for removing gases and odors. For best performance, always use a genuine Philips HESAMax cartridge.

Why does the purifier stop working after a short time?

This is normal. The purifier has a voltage protection function that shuts it off when the vehicle's voltage fluctuates. It will resume once the voltage stabilizes.

Will the purifier drain my car battery if left connected?

To prevent battery drain, the purifier automatically shuts off after 2 hours of continuous operation. You can restart it manually by pressing the power button.

What should I do if the purifier does not switch to high speed?

Ensure the USB port provides at least 5V/1A. Avoid using USB data ports; use a dedicated charging port. If the power is insufficient, the device may stay in low speed.

How often should I replace the HESAMax cartridge?

The recommended replacement period is every 12 months, but it may vary depending on the level of gases or odors inside the car.

Is it safe to disassemble the purifier?

No, the product contains UVC LED sterilization technology. Disassembly may expose you to UV radiation. Do not attempt to open the device.

Can I clean the purifier with water?

No, do not spill any liquids on the device. Only wipe it with a soft, dry cloth. Do not use water, detergents, or flammable solvents.

What does the blue light ring indicate?

When the blue light ring blinks at startup, it signals that the filter needs replacement. Normally, the ring may be lit or off depending on the mode.

USER MANUAL GoPure Style GP561SLVX1 PHILIPS

User Manual

EN Read these instructions for use carefully before using the product and save them for future reference.

Warranty and service

The Lumileds warranty applies, provided:

• The product is handled properly for its intended use only. • The product is used in accordance with its operating instructions. - You present the original invoice with the product.

The Lumileds warranty does not apply if the product is damaged due to accident, error, or misuse.

For more information and assistance, or if you have a problem with the product, you can visit the Philips website at www.philips.com/automotive, or contact the retail outlet where you purchased the product.

Or for the users in China, please call the customer service hotline: [phone]

Lumileds (Shanghai) Management Co., Ltd No. 19-20, Lane 299, Wenshui Road, JiangAn District, Shanghai

2

1 ⚠️ Important information

⚠ Warning

Do not clean or spill any liquids such as water, detergents, or flammable solvents on the device.

Keep Philips car air sanitizer free of any obstruction. Do not cover!

To clean the car air sanitizer:

• Disconnect car air sanitizer
• Use soft cloth only.

Philips car air sanitizer is not a toy! Do not let children play with it.

For your safety, do not manually operate the device while driving. Always stop your car first!

UVC LED sterilization technology is used in this product. It is strictly forbidden to disassemble the air sanitizer to avoid possible exposure to UV radiation.

Help to preserve the environment. Do not discard the device with household waste. Bring it to the official waste recycling service location near you. Filter and HESAMax cartridge may be disposed of with household waste.

2 Product Introduction

4

2.1 Discover the content of Philips package

USB Type-C power cable

User Manual

Note

Ensure the device is installed according to the instructions in this guide.

For your safety, please use the items delivered in this package only to install the device. In case of incorrect installation, Lumileds declines all responsibility for any harm or accident.

3 Installing the car air sanitizer

3.1 Remove the packaging of the HESAMax cartridge before use

Remove the base as shown in the image below. Remove the HESAMax cartridge from the base and then remove the plastic packaging. Then, put the HESAMax cartridge and base back into place.

5

3.2 Installing and connecting the console

Place the air sanitizer in the cup holder in the center console or armrest of the car.

Use the power cable provided to connect the air sanitizer to the car's USB port.

Precautions

Do not place the air sanitizer in places other than the cup holder to prevent unexpected product movement, as the car is moving, that affects safety whilst driving.

In-car USB DATA port is not recommended as power input.

Please avoid the use of any USB port with a power rating lower than 1.0A, or low-powered car lighter outlet with an adapter as the power source.

When input power is lower than required, product performance will be compromised.

Do note: The USB ports of some cars continue to supply power even when the engine is off. To avoid running out of batteries, the air sanitizer is set to automatically shut down after two hours of continuous operation. When the air sanitizer is automatically turned off after two hours during driving, turn it on manually if you wish to turn the air sanitizer on again.

4 Operating the Philips car air sanitizer

Once the car's USB port starts supplying power, the air sanitizer will turn on automatically. It will operate in low speed mode as the default.

1. Press the ON/OFF button to switch into the operating mode between low speed and high speed.
2. When turned on, press and hold the ON/OFF button for 2 seconds to shut down the air sanitizer.
3. When turned off, press the ON/OFF button to start it; it will operate in low speed mode by default.

5 Replacement of filter and HESAMax cartridge

This product has two air filtration features that require replacement: a high-efficiency particle filter and a HESAMax cartridge.

5.1.1 Filter replacement reminder

The air sanitizer will automatically remind you to replace the filter.

When the filter needs to be replaced, the blue light ring on the top of the air sanitizer will blink every time it's turned on.

5.1.2 How to replace the filter

1. After removing the base, open the filter cover and remove the filter.

5.1.3 How to reset the air sanitizer

1. With the filter cover open, power on the air sanitizer. Press and hold the ON/OFF button for more than 5 seconds until you hear "ding ding" and release the button to reset the filter.
2. Close the filter cover and install the base.
3. If the reset failed, please repeat the above steps.

5.2 How to replace HESAMax cartridge

HESAMax cartridge works 24/7, the replacement cycle depends on the in-car gas/odor level. The recommended replacement period is 12 months. Remove the HESAMax cartridge from the base and replace with a new one. Then, fix the base back in place

Precautions

For the sake of safety, when the filter cover is open, the fan inside the air sanitizer and the UVC lamp will stop working. Please be sure to use genuine Philips SaniFilter Plus and HESAMax cartridge, and replace them in a timely manner. This will maintain the best performance of Philips car air sanitizers and make sure the purest air in the car.

6 Philips car air sanitizer troubleshooting

Problem 1

Philips car air sanitizer does not switch to high speed.

Solution 1

• Check it is not connected to in-car USB data port which is usually not designed as power source.
• Connect to in-car USB port with charging function.
• Or check your USB power input, it needs to be higher than 5V/1A.

Problem 2

Some cars continue to power the 5V outlet when the engine is off.

Solution 2

To avoid draining the battery, Philips car air sanitizer will automatically power off after two hours of continuous running. To restart your device, press the power button.

Problem 3

After filter replacement, the blue light ring on top remains blinking at restart.

Solution 3

Turn off the device and follow filter reset steps in section 5.1. Please make sure the power cable remains connected during the whole process.

Problem 4

The Philips car air sanitizer stops running for a short while.

Solution 4

This is normal: Philips car air sanitizer has a voltage protection function. The device turns off automatically when the voltage supply from vehicle is fluctuant. The device will resume to work once the voltage comes back stable.

How to reset the air purifier

5.2 How to replace the HESAMax cube

19

3.2 Installing and connecting the control unit

Note

How to reset the air purifier

5.2 How to replace the HESAMax cartridge

26

3.2 Settings and power connection

Note

5.1.3 How to reset the replacement indicator

33

3.2 Installation and connection

⚠ Caution

5.1.3 How to reset the air purifier

5.2 Replacing the HESAMax cartridge

Lumileds is the warrantor of this product.

Philips and the Philips Shield Emblem are registered trademarks of

Koninklijke Philips N.V. and are used under license.

2020 © Lumileds Holding B.V. All rights reserved.

Lumileds provides warranty for this product.

(Lumileds Holding B.V.) All rights reserved.