AGORIS 5890DN/BDN - Printer SAGEM - Free user manual and instructions

Product Type	Professional multifunction terminal (fax, printer, copier, scanner)
Brand	SAGEM
Model	AGORIS 5890DN/BDN
Dimensions (W x D x H)	457 x 560 x 698 mm (without options)
Weight	25 kg
Power Supply	220-240 V, 50/60 Hz, 4.7 A
Power Consumption	Standby: 20 W; Idle: < 80 W; Operating: 700 W (peak 1000 W)
Main Functions	Fax (black & white, 33.6 kbps), laser duplex printing 35 ppm (B&W), duplex B&W copying, duplex color scanning, SMS, email, USB key printing, LAN 10/100 Base-T network
Print Resolution	600 dpi
Memory	64 MB SDRAM (expandable to 512 MB)
Paper Capacity	Cassette: 500 sheets (80 g/m²); Multipurpose tray: 100 sheets (80 g/m²)
Supported Paper Sizes	A5 to A4/Legal (cassette); 70 x 148 to 216 x 297 mm (multipurpose tray)
Paper Weight	Cassette: 60 to 120 g/m²; Multipurpose tray: 60 to 220 g/m²
Print Speed	35 pages/min (A4, B&W)
First Print Out Time	Approximately 11 seconds or less (A4)
Display	Color graphic display
Connectivity	USB 2.0 High-Speed, Ethernet 10/100 Base-T, Centronics parallel, USB host (front)
Fax	33.6 kbps fax modem (B&W), 56 kbps data modem; PSTN and Internet transmission/reception (Fax to Email)
Scanner	Duplex color scanner, 600 dpi; 50-page document feeder
Maintenance	Toner cartridge replacement (standard 15,000 pages, initial 7,500 pages); toner waste box; regular cleaning; overhaul every 300,000 pages
Safety	Class 1 laser device; safety instructions: do not open, unplug before maintenance, avoid moisture and metal objects
Spare Parts / Repairability	Toner cartridge, waste box, additional paper trays (500 sheets), PC Companion Suite Pro LH kit; overhaul by qualified technician
General Information	Internet-enabled terminal; send/receive email and SMS; copy, print, fax, scan functions; PCL6, KPDL, PostScript Level 3 compatibility

Frequently Asked Questions - AGORIS 5890DN/BDN SAGEM

How to load paper into the cassette?

Remove the cassette from the printer, adjust the guides to the desired format (standard formats are indicated), fan the paper and place it print side down. Do not exceed the maximum fill marks. Reinsert the cassette fully.

What to do in case of a paper jam?

The screen displays the jam location. Open the indicated covers, gently remove the stuck paper in the direction of travel. Avoid tearing the paper. Close the covers; printing resumes automatically after warm-up.

How to replace the toner cartridge?

Open the top cover, shake the new cartridge laterally at least 10 times to distribute the toner. Insert it pushing until it clicks. Open the left side cover, position the new toner waste box and close the cover.

How to send a fax?

Place the document face up in the feeder or on the glass. Select MENU > FAX > SEND FAX. Dial the recipient's number using the numeric keypad or directory, then press OK to send.

How to configure the local network?

Go to SETTINGS > NETWORKS > LOCAL NETWORK. Choose automatic configuration (DHCP/BOOTP) or manual. In manual, enter the IP address, subnet mask, and gateway. Confirm with OK. The terminal must be restarted.

How to print from a USB key?

Insert the USB key into the front port. On the screen, select MEDIA > PRINT PHOTO or PRINT DOC. Navigate to choose the file, adjust options (number of copies, duplex) and press OK to start printing.

How to set the date and time?

Press MENU, then SETTINGS > DATE/TIME > MODIFY. Enter the date and time in DDMMYYHHMM format (e.g., 0811050933 for November 8, 2005 at 9:33). Confirm with OK. You can also enable automatic summer/winter adjustment.

How to enable duplex mode for printing?

On the print control panel, press MENU, navigate to PAPER MANAGEMENT > DUPLEX MODE. Select ACTIVE to enable duplex. You can also set the default mode for received faxes in SETTINGS > RECEPTION > DUPLEX.

What to do if the 'Toner low' message appears?

The toner indicator flashes or stays on. Replace the toner cartridge as described in the manual (open top cover, shake new cartridge, install it). Also replace the toner waste box if necessary. Refer to the Maintenance chapter.

How to clean the device?

Unplug the device before cleaning. Use a soft, slightly damp cloth for the exterior. For the interior, use a vacuum or a lint-free cloth. Do not touch the transfer rollers. Regular cleaning of the scanner (glass and feeder) is recommended.

USER MANUAL AGORIS 5890DN/BDN SAGEM

Scan to PC (selon modele) 5-11

Boites aux lettres (BAL FAX) 5-38

Calibrage scanner 6-12

Incidents 6-12

Echecks en communication 6-12

Incidents scanner 6-16

Incidents divers 6-17

Dépannage 6-18

Stockage 6-34

Sagem Communication - Customer relations department

CONDITIONS D'EMPLACEMENT

MENUPRINCIPAL10:MEDIA

$$ M E N U - \vee - I N T e r F A C E > - \vee - T C P / I P > D H C P $$

Activer le reroutage

391 OK - TELECOPIE / REROUTAGE / ACTIVATION

You've ares alloxedsquobpoblities:

Scan to PC (selon modele)

Remarque

Activer le reroutage

Date: 12-12-04 14:20

Date: 12-12-06 14:20

BOÎTES AUX LETTRES (BAL FAX)

IBM Program License Agreement

THE DEVICE YOU HAVE PURCHASED CONTAINS ONE OR MORE SOFTWARE PROGRAMS ("PROGRAMS") WHICH BELONG TO INTERNATIONAL BUSINESS MACHINES CORPORATION ("IBM"). THIS DOCUMENT DEFINES THE TERMS AND CONDITIONS UNDER WHICH THE SOFTWARE IS BEING LICENSED TO YOU BY IBM. IF YOU DO NOT AGREE WITH THE TERMS AND CONDITIONS OF THIS LICENSE, THEN WITHIN 14 DAYS AFTER YOUR ACQUISITION OF THE DEVICE YOU MAY RETURN THE DEVICE FOR A FULL REFUND. IF YOU DO NOT SO RETURN THE DEVICE WITHIN THE 14 DAYS, THEN YOU WILL BE ASSUMED TO HAVE AGREED TO THESE TERMS AND CONDITIONS.

The Programs are licensed not sold. IBM, or the applicable IBM country organization, grants you a license for the Programs only in the country where you acquired the Programs. You obtain no rights other than those granted you under this license.

The term "Programs" means the original and all whole or partial copies of it, including modified copies or portions merged into other programs. IBM retains title to the Programs. IBM owns, or has licensed from the owner, copyrights in the Programs.

1. License

Under this license, you may use the Programs only with the device on which they are installed and transfer possession of the Programs and the device to another party.

If you transfer the Programs, you must transfer a copy of this license and any other documentation to the other party. Your license is then terminated. The other party agrees to these terms and conditions by its first use of the Program.

You may not:

1 use, copy, modify, merge, or transfer copies of the Program except as provided in this license;
2 reverse assemble or reverse compile the Program; or
3 subsidize, rent, lease, or assign the Program.

2. Limited Warranty

The Programs are provided "AS IS."

THERE ARE NO OTHER WARRANTYES COVERING THE PROGRAMS (OR CONDITIONS), EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTYES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Some jurisdictions do not allow the exclusion of implied warranties, so the above exclusion may not apply to you.

3. Limitation of Remedies

IBM's entire liability under this license is the following;

For any claim (including fundamental breach), in any form, related in any way to this license, IBM's liability will be for actual damages only and will be limited to the greater of:

1 the equivalent of U.S.$25,000 in your local currency; or
2 IBM's then generally available license fee for the Program

This limitation will not apply to claims for bodily injury or damages to real or tangible personal property for which IBM is legally liable.

IBM will not be liable for any lost profits, lost savings, or any incidental damages or other economic consequential damages, even if IBM, or its authorized supplier, has been advised of the possibility of such damages. IBM will not be liable for any damages claimed by you based on any third party claim. This limitation of remedies also applies to any developer of Programs supplied to IBM. IBM's and the developer's limitations of remedies are not cumulative. Such developer is an intended beneficiary of this Section. Some jurisdictions do not allow these limitations or exclusions, so they may not apply to you.

4. General

You may terminate your license at any time. IBM may terminate your license if you fail to comply with the terms and conditions of this license. In either event, you must destroy all your copies of the Program. You are responsible for payment of any taxes, including personal property taxes, resulting from this license. Neither party may bring an action, regardless of form, more than two years after the cause of action arose. If you acquired the Program in the United States, this license is governed by the laws of the State of New York. If you acquired the Program in Canada, this license is governed by the laws of the Province of Ontario. Otherwise, this license is governed by the laws of the country in which you acquired the Program.

Monotype Imaging License Agreement

1 "Software" shall mean the digitally encoded, machine readable, scalable outline data as encoded in a special format as well as the UFST Software.
2 You agree to accept a non-exclusive license to use the Software to reproduce and display weights, styles and versions of letters, numerals, characters and symbols ("Typefaces") solely for your own customary business or personal purposes at the address stated on the registration card you return to Agfa Japan. Under the terms of this License Agreement, you have the right to use the Fonts on up to three printers. If you need to have access to the fonts on more than three printers, you need to acquire a multi-user license agreement which can be obtained from Monotype Imaging KK. Monotype Imaging KK retains all rights, title and interest to the Software and Typefaces and no rights are granted to you other than a License to use the Software on the terms expressly set forth in this Agreement.
3 To protect proprietary rights of Monotype Imaging KK, you agree to maintain the Software and other proprietary information concerning the Typefaces in strict confidence and to establish reasonable procedures regulating access to and use of the Software and Typefaces.
4 You agree not to duplicate or copy the Software or Typefaces, except that you may make one backup copy. You agree that any such copy shall contain the same proprietary notices as those appearing on the original.
5 This License shall continue until the last use of the Software and Typefaces, unless sooner terminated. This License may be terminated by Monotype Imaging KK if you fail to comply with the terms of this License and such failure is not remedied within thirty (30) days after notice from Monotype Imaging KK. When this License expires or is terminated, you shall either return to Monotype Imaging KK or destroy all copies of the Software and Typefaces and documentation as requested.
6 You agree that you will not modify, alter, disassemble, decrypt, reverse engineer or decompile the Software.
7 Monotype Imaging KK warrants that for ninety (90) days after delivery, the Software will perform in accordance with Monotype Imaging KK-published specifications, and the diskette will be free from defects in material and workmanship. Monotype Imaging KK does not warrant that the Software is free from all bugs, errors and omissions.
8 THE PARTIES AGREE THAT ALL OTHER WARRANTYES, EXPRESSED OR IMPLIED, INCLUDING WARRANTYES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY, ARE EXCLUDING.
9 Your exclusive remedy and the sole liability of Monotype Imaging KK in connection with the Software and Typefaces is repair or replacement of defective parts, upon their return to Monotype Imaging KK.

10 IN NO EVENT WILL MONOTYPE IMAGING KK BE LIABLE FOR LOST PROFITS, LOST DATA, OR ANY OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES CAUSED BY ABUSE OR MISAPPLICATION OF THE SOFTWARE AND TYPEFACES.
11 Massachusetts U.S.A. law governs this Agreement.
12 You shall not sublicense, sell, lease, or otherwise transfer the Software and/or Typefaces without the prior written consent of Monotype Imaging KK.
13 Use, duplication or disclosure by the Government is subject to restrictions as set forth in the Rights in Technical Data and Computer Software clause at FAR 252-227-7013, subdivision (b)(3)(ii) or subparagraph (c)(1)(ii), as appropriate. Further use, duplication or disclosure is subject to restrictions applicable to restricted rights software as set forth in FAR 52.227-19 (c)(2).
14 YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTAND IT, AND AGREE TO BE BOUND BY ITS TERMS AND CONDITIONS. NEITHER PARTY SHALL BE BOUND BY ANY STATEMENT OR REPRESENTATION NOT CONTAINED IN THIS AGREEMENT. NO CHANGE IN THIS AGREEMENT IS EFFECTIVE UNLESS WRITTEN AND SIGNED BY PROPERLY AUTHORIZED REPRESENTATIVES OF EACH PARTY. BY OPENING THIS DISKETTE PACKAGE, YOU AGREE TO ACCEPT THE TERMS AND CONDITIONS OF THIS AGREEMENT.

SECURITE

CONSIGNES DE SECURITÉ

CLASS 1 LASER PRODUCT

LASER KLASSE 1

APPARECCHIO LASER DI CLASSE 1
PRODUCTO LASER DE CLASE 1
APARELHO ALASER DE CLASSE 1

SAGEM Communication - Customer relations department 4 rue du Petit Albi - 95800 Cergy Saint-Christophe - FRANCE