MY X-1 - Mobile Phone SAGEM - Free user manual and instructions

USER MANUAL MY X-1 SAGEM

11 + You have just bought a mobile phone and we congratulate you on your choice. Your phone will allow you to use different international networks (GSM 900 MHz and DCS 1800 MHz) depending on the roaming agreements between the operators. We would Ike to remind you that this phone is approved to European standards. To get he most out of using your phone, we recommend that you read this manual carefully and keep it handy for future reference if needed. WARNING According to the configuration of the netorks and Compaïbliy of your SIM card associated subscriplions, certain functions may not be Your phone is compatible with SIM 3V avallable (usually indicated by). cards only, Make sure your SIM card is compatible with your phone. If an incompatible SIM card is inserted, a message wil be displayed when sitching on your phone. For further information, contact your Operator. The SAGEM logo and trademark are {he property of SAGEM SA. AT is a registered trademark of Hayes Microcomputer products Inc. Hayes is a registered trademark of Hayes Microcomputer Products Inc. T9 Text Input is a registered trademark of CTegic Communications Inc. T is licensed under one or more of {he following U.S Patents: 5,818,437, 5,953,541, 5,187,480, 5,945,928, 6,011,564 and additional patents are pending worldwide. MYX-1_EN-00.pmd 1

MYX-1_EN-00.pmd C € Conformance Document SAGEM SA declare under its sole responsibility that the product Dual Band GSM/DCS Type A2003 conforms to the requirements of the following EC: directives: EEC Directive Satety EMC Low voltage directive Network Health 1999/5/CE EN 60950: 2000 EN 301 489-1 EN 301 489-7 T3/23ICEE SGPP TS 51.010-1 v5.3.0 selected with GCF-CC v3.10.0 included Requirements GTO1 v 4.7.0 19 Edition 5 TBR 20 Edition 3 TBR 31 Edition 2 TBR 32 Edition 2 EN 301 419-1 EN 301 511 EN 50360 EN 50361

unctions at a glance MYX-1_EN-00.pmd Switch on Press 4. Cal Dial he number then press 49. Answer Press 4. Hang up Press Switch off Press { (long press) Hands-free 0 communicate, press 49. Lock and unlock the keyboard from the standby screen Press * then OK. Redial last number Press 49 tice. Make a call from a number stored in the directory By name: enter {he first letter of the name, press 4, scroll down the list to find your correspondent, the press 49 to call By location in the directory: enter the location number then press «10 call 23/09/2008, 16:29

Menus at a glance Enter using A or w Navigate using A and w Validate using OK Quit or return to the previous menu using C According to the model of your phone, to the configuration of the networks and associated subscriptions, certain functions may not be available (indicated by *) Depending on the model, the phone menus will appear as listed below: Services Directory Directory menu Sort by location Create record Cal groups Available memory Personal numbers Quit Text messages Write new. Call services Call fonwarding View last numbers Duration and cost of call (*) Display numbers Double cal Automatic redial Blackist Voice mail number Local information (*) MYX-1_EN-00.pmd 4 Ringing and beeps Volume and choice of music Call groups Personalised ringing tone Vibrate (*) Silent mode Beeps Controls Customization Select language Automatic response Network selection Setting time/date Display contrast Currency converter Security Keyboard locking PIN number PIN number 2 (*) Phone code Confidentialty messages Operator password (*) Limitincoming call (° ) Limit out at call Pre-set directory (*) Costs (" Accessories Calculator Alarm Timer Carkit(*) Data parameters Games 23/09/2008, 16:29

Glossary Outgoing call Incoming call SIM card PIN PIN2 Phone code IMEI SMS or EMS Service provider or operator MYX-1_EN-00.pmd A call made from your phone A call received by your phone. The card containing your subscription and access rights to services. The detachable part is the “micro-SIM” The personal code linked to your SIM card The second personal code linked to your SIM card to access certain functions (). The phone code is a secret code intended to protect the phone in case of theft. The identification number of your phone. Short Message Service or Extended Message Service: sending and receipt of text messages, icons, animated screen savers and melodies. Company which manages the network subscription. s 23/09/2008, 16:29

Key + Display . Exchanging the front anc Getting started … 12 Information on the 12 Instaling the SIM card and the battery …. 13 Ghargngtne batery 14 Sichig on Mg SE UD 15 Setting Time and Date 15 Searching for a network 16 Suitching of 17 Recommendation 17 Menu access 17 Deleting characters - 17 Initial communication - Hands-free mode .. 18

8- Operate/Call- Activation of hands-free

11- Battery charging and accessories socket

ou 8 w nn WARNING! During a call, mind you do not obstruct the microphone with your hand. 23/09/2008, 16:29

Presentation of the phone Function keys { Switch off Reject a call — Hang up æ Stitchon- Call a number Receive a call - Hands- ù free mode (*) c Short press: Return to the previous menu - Delete a character Long press: Exit menu mode - Complete deletion of the entry OK Vaïdate : - Programmable keys for direct access to the functions that you have selected (depending on model) - Volume control during conversation (lefthand key +: lower, righthand key + :louder) - Contextual action @ Mobile Internet access key (depending on model) w and A Entry and scroling through the menus. Alphanumeric keyboard Made up of 12 keys: 0 to 9, + and #. To obtain a number or letter, hold doun the relevant key until the desired number or letter appears. Letters with accents are obtained by a long press on + after entering the letter with no accent. Punctuation marks and special symbols are obtained by a long press on the # key. I] + LR MYX-1_EN-0tpresent.pmd ° 23/09/2008, 16:29

Presentation of the phone Key 1 A long press on key 1 allows you to access the voicemail service (depending on model). Key + A long press on key + allows you to activate or deactivate the silent mode. Display The high definition graphics screen enables you to read messages easily. Various icons inform you about the status of functions. Battery charge indicator (black if charged, clear if discharged) Received signal strength indicator (maximum strength: 5 bars) The R letter indicates if the network found does not correspond to the subscription If Ÿ flashes, the phone is searching for a network Hands-free loudspeaker Callin progress Permanent call forwarding Silent mode Receipt of messages and presence of messages not read Flashing: message memory full Voice messages present. I] + LR MYX-1_EN-0tpresent.pmd 10 23/09/2008, 16:29

Presentation of the phone MYX-1_EN-0tpresent.pmd Ft

The three keys located under the screen are allocated to actions described at the bottom of the screen just above the key, each time it is necessary. For example: Validate Pressing the righthand key ++ validates the current function. Exchanging the front and back panel Switch off the phone. 1 Turn it over and slide the back catch upwards. 2 Take off the back cover starting at the bottom. Take out the central section and the keypad. 3 Position the keypad in the new front cover making sure that no dust gets in, then follow with the central section. 4 Replace the back cover, clicking in first the upper part then the lower and pushing the back catch downwards into the locked position. 25/09/2008, 12:54

Getting started SIM card This card must be handled and stored with care in order to avoid excessive stresses gr sertches tatoué damage 1. your SIM card is lost, contact your Operator or Service Provider immediately. Note: Do not leave you SIM card within the reach of small children. MYX-1_EN-02Geting started.pmd 12 Information on the SIM card To use your phone, you have a small card called a SIM card. In addition to all of the information necessary for the network, this card contains other information that you can modify: + secret codes (PIN and PIN2 - Personal Identification Number) + directory : mini-messages « functioning of specific services. Your phone is compatible with the different SIM cards provided by the Operators Itis compatible with SIMWIM cards (cards which contain in addition the WIM module (Wireless Identity Module) which allows secured WAP communications). 23/09/2008, 16:29

Installing the SIM card and the battery Switch of your phone and disconnectthe charger. The SIM card is inserted beneath the phone's battery. 1 Turn your phone over and slide the backcatch up. 2 Take off the back cover, starting from the bottom. 3 Take outthe battery. 4 Slide the card along the base beneath the retaining plate, with the gold coloured sections facing towards the phone and the cut-off corner lined up to match the drawing on the phone. 5 Place the battery by first inserting the upper section into the opening. 6 Replace the back cover, clicking in first the upper part then the lower and pushing the backcatch downwards into the locked position. 23/09/2008, 16:30

Warning There is a risk of explosion the battery is incorreclly replaced or disposed of in fie. Do not short-circuit. The battery does not contain any components that can be changed by you. Do not attempt to open the battery case Only use the correct chargers and batieries as shown in the manufacturer s catalogue. Spent batteries must be collected at the appropriate sites. You are advised to remove the battery if you intend to leave your phone unuséd for a long period.

MYX-1_EN-02Geting started.pmd 14 Charging the battery Your phone is powered by a rechargeable battery. À new battery must be charged for at least 4 hours before itis used for the first time. It will reach is nominal capacity after several usage cycles. When your battery has run doun, the phone displays it and cuis out. Torecharge your battery: Connect the charger to a wall outlet Connect the end of the charging cable to the bottom of your phone. The phone wil start charging. The battery charging indicator indicates the charge. Charging stops by itsel. Unplug the cable. His possible that during charging, the battery may heat up light: this is normal. 23/09/2008, 16:30

Getting started Control of the PIN code I your phone displays SIM absent, press À (long press) to switch off your phone änd check that your SIM card is Correctiy positioned. Warning Ithe wrong PIN code is entered three times in a row, the card will be locked. T unlock your card: -enter **05* - enter the PUK code (Personal Unlocking Key) provided by your Network Operator and validate, - enter your PIN code and validate, - enter your PIN code again and validate! After 5 or 10 times (depending on SIM card type), the SIM card will be permanently locked. Contact your Operator or your Service Provider to obtain a new card. The same procedure (entering 052) applies when the PIN-2 code is blocked {PÜK 2 code). MYX-1_EN-02Geting started.pmd 15 Switching on/switching off, Starting up To switch on your phone: Press 49 to switch on your phone. I access to the SIM card is protected by a secret code, the phone will ask you to enter your PIN code: PIN code This is the personal code for your SIM card. You may be asked to enter this code when the instruction: Pin number? appears after you switch on your phone. Enter the code of between 4 and 8 digits given to you by your operator. These digits wil not be displayed on the screen for security reasons. Press # or OK or on righthand key ++ to validate. PIN2 code (*) If one was given to you by your Operator, a second PIN code provides secure access to certain functions. Setting Time and Date The first time the phone is used, the time and date will need to be set. lthe pate, has complete run down or been taken out, you will be asked to validate the time and date. 23/09/2008, 16:30

Network indicator The indicator of the level of network signal received enables you to visualise the quality of reception. lit shows less than x three bars, look for better reception to make your call in good conditions.

MYX-1_EN-02Geting started.pmd 16 Setting the time Set the time either by typing it in or by using the scroling arrows to alter the numbers already displayed. Setting the date Set the date either by typing it in numerically or by using the scrolling arrows to alter the display. When the time and date are correct, validate with the OK key. Searching for a network The phone then searches for a network on which it can communicate: Hitfinds one, the name of the network appears on the screen. You are ready to make or receive a call Ifthe R letter and a network name are displayed, calls can be made. Ifthe R letter is displayed without any network name, only emergency services will be accessible (police, ambulance, fire brigade) Ifthe Ÿ flashes, the phone will keep searching. No network is available. 23/09/2008, 16:30

Switching off Hold doun the { key until the end message is displayed. Release the key. The phone switches off. Recommendation our gone equipe with an itegrted anenna. For the best reception, try not to cover the top part of the phone with your hand. Menu access The menu functions permit you to verify or modify the various functions of your phone to adapt it to your needs Press the scroling arrows w or a. to access the menus. Scrol through the menus using the scroling arrows then press OK to access the selected menu. Each time you want to validate an action, press OK. To abandon an action, press C. To exit the menu mode, press and hold C. Deleting characters You can cancel an entry error: Press quickly on C to delete the last character.

Initial communication - Hands-free mode International call Press 0 (long press) to display + then dial the country code without waiting for a tone, then the number you require Emergency services Depending on the operator, you can contact the emergency services with or without a SIM card or men the keyboard is locked. I is sufficient to be in a zone served by a network. To call he international emergency service, dial 112 then press 49 Other emergency service numbers may exist, depending on the country. MYX-1_EN-03comm.pmd 18 Making a call The network is displayed. Dial the number. Press 49. During the cal,’ flashes on the screen, and tones may signal the establishment of a connection. When the person you have called answers, speak. Receiving a call When you receive a call: Press then speak. The callers number is displayed when itis presented to the network. Al incoming and outgoing cal numbers are registered in the list of the last calls. Volume control Increase or decrease the volume during a conversation by pressing the lefthand {+ or righthand {+ «) Key. 23/09/2008, 16:30

Initial communication - Hands-free mode The “Hands-free” mode enables you to follow a conversation with several people and be free to move, for example, to take notes during your conversation. Warning Before putting the phone to your ear, check the volume control settings as well as the selected listening method, especially if using integrated hands free mode, which could cause ear damage if used incorrectly. MYX-1_EN-03comm.pmd 19 Hands-free mode (not available on all models) During a call, you can transfer from handset mode to hands-free mode simply by pressing one key and the reverse. Press 4. The screen displays Ÿ for handset mode and (f for “hands-fre” mode. Ending a call Press{ The end of call message appears on the screen. 23/09/2008, 16:30

Directory The quanfity of phone numbers stored in the SIM card directory varies depending on the capacity of the card Your Operator or your Service Provider can provide you with this information. Itis advisable to store numbers in their international format (+, country code, and number). You can very the contents of a record and modify it by. selecting the required name. When sorting by location, pressing on the * key launches a search for the first available location: pressing on # retums to the start of the list.

MYX-1_EN-04Directory.pmd 20 Directory display You can store the telephone numbers that you call regulary: -in the SIM card, -in the phone itsel. Different icons wil inform you of the directory location where the number is stored when you search for it: E SIM card directory f Yourphones directory À SiMcardpre-set directory Storing a number Inthe Directory menu, select Create record. Validate by pressing OK. Enterthe name (the number of accepted characters depends on the SIM card used). Validate. Enterthe number including the area code, if necessary {up to 20 characters). Validate. You can enter spaces in the number (displayed as commas ‘”) by pressing (long press) on + or #. The figures entered alter a space are processed in a DTMF séquence (usable after a number) I necessary, select the cal group to which you want to assign this number. Depending on the available space, you can select the storage location of the number entered: SIM card or phone itself. 23/09/2008, 16:30

MYX-1_EN-04Directory.pmd

Deleting a number To delete the contents of a directory location, select the name using the scroling arrows. Validate by pressing OK. Select Delete, then validate. Call groups You are also able to classify contacts recorded in the directory into Call Groups. To each of these groups you attribute certain characteristics (icon, ringing tone, vibrator, etc.). Creating a group Groups are defined by default in your phone. In order to look up their characteristics, display a list of the groups - Directory/Directory menu/Call groups menu. singe scalingarous. choose a group and press OK. Vou are then able to look up or alter its characteristics or to erase the group. To create a new group: Go into Directory/Directory menu/Call groups. Choose Create group. Enter a name and validate. Choose an icon using the scroling arrows and validate. Choose a ring tone, then choose a vibrator mode, and validate

I call groups are not enabled, you cannot attach correspondents to groups. MYX-1_EN-04Directory.pmd 22 The selection of a call group is made when entering a number into the directory, or when modifing a number you have already saved! Activate the Call Groups function I you want the characteristics of the groups to apply to each call: Go into Directory/Directory menu/Call groups. Choose Activate groups. Tick the box and validate. The calls received from contacts who do not belong to a Cal group use the parameters provided in the Ringing and beeps menu. Available memory To ascertain the number of groups which can still be created: Go into Directory/Directory menu/Call groups/ Group menu Choose Available memory. The first number shows the number of groups which can still be created, and the second shows îhe maximum number of groups. Looking up a group Select the group to be looked up and press OK. Choose See group. The screen presents the name, the icon, and the choice of vibrator mode of the group. Ifthere are contacts attached to this group, press the righthand key ++ to view the list of these ones. 23/09/2008, 16:30

MYX-1_EN-04Directory.pmd

Modifying a group Select the group to be modified, and press OK. Choose Modify. Carry outthe wanted modifications. Validate by OK. Deleting a group Select the group to be deleted, and press OK. Choose Delete. Confirm by OK. Sorting Directory menu enables you to sort the stored numbers by name or location: for the latter, the free locations are indicated in the list. Sending a short message to a stored number Selectthe recipient scroling using the scroling arrows and validate using OK. Select Send message and validate using OK. Compose your text message. Press OK. Select Send and validate using OK. The recipient number is displayed Send your message using the righthand key + ».

Directory memory space In Directory menu, select Available memory. Validate using OK. The screen wil display the amount of available space on the SIM card and on the phone itself. Displaying personal numbers Using Directory menu/Personal numbers menu, you can create records for your own numbers in order to be able to consult them: Making a call with a stored number Here are all the ways you can call a correspondent, whose number you have saved in the directory, from the standby screen: +) Enter the first letter(s) of your correspondent's name, as you saved it into te directory, and then press 49 . The directory listis displayed, with the first name that correspond with the letter you entered at the top. If your correspondent is not at the top, use the scrolling arrows to select the name. Press on #9 to make the call

2) Enter the number under which you have saved your

Sorespondents details, and then press on # (rapid al).

3) Enter the number under which you have saved your

correspondent's details, and then press on #. Your correspondent's number is displayed, at which point you can modify or add to the number. Press on 4? to make the call

Messages Access 10 this service depends on the network. For more information, consult your Operator or your Service Provider. Ask your operator about downloading icon, animated screen saver or melody messages. Unread messages are in bold MYX-1_EN-05messages.pmd 25 Receiving a message Several types of message may be received: + text messages + text messages which may include different types of objects (mages, melodies, animated icons) + icons for call groups + animated screen savers + mélodies + WAP bookmarks + WAP information When you receive a message, the phone beeps (the beep is selected using the menu Ringing and beeps/ Volume and choice of music/Messagés). The Sicon is displayed on your phone screen. This icon remains on screen until the messages have been read. When the icon flashes, the memory is ful. The receipt of icons, animated screen savers or melodies can take several minutes. Messages inform you of the downloading progress. Atany time, you can: + hide that screen by pressing the lefthand key » (e.g. to make a cal or access other information on your phone), + or cancel he download in progress by pressing the righthandkey ++. Go into the Text messages menu to access the list of messages received.

SY0B8E Meaning of the symbols at the top of the screen This symbol indicates a text message that has been written. this symbol is flashing, it means that the message has not been sent This symbol indicates a message that has been received. this symbol is flashing, it means that the message has not yet been read This symbol indicates a message which is incomplete or inthe process of being received. This symbol indicates that the message is corupted: it consists of several fragments, some of which have been lost. Meaning of the symbols in front of each message Call group icons Animated screen savers Text messages Melodies Text messages which include objects Actions possible for a message received Select a message. By pressing the lefthand key », you can read a text message, view it, listen to it or extract ihe objects it contains. 23/09/2008, 16:30

Messages Warning Only the screen savers and melodies without Copyright may be fonwarded to another person and depending on model. MYX-1_EN-05messages.pmd 27 Press the lethand key » (Options), to view the options available, which vary according to the type of message received: + readit + delete it - reply fonward it to another person consult the available memory delete all the read messages delete all the messages choose a sending option enterthe number of the messaging centre add a WAP bookmark (see below) save itin your phone (melody, animated screen saver and icon (see below). Adding a WAP bookmark in your phone (depending on model) To add a WAP bookmark received: If you have just read it, choose the Add WAP bookmark option by pressing the lefthand key + (Options)

Selectit in the list and choose the Add WAP bookmark option by pressing the lefthand key + (Options)

Messages Saving an object included in a text message which has been received (depending on model) Some text messages may contain images, melodies {symbolised by a note of music) or animated icons. To save an object in your phone: Put the cursor on the object you wish to save. Press the righthand key » » (Extract) Press the righthand key » ». Select New and press the righthand key » » Type in a name and press OK. The space required and the space available in the phone are shown. If the maximum number of objects or the maximum total size has been reached, you will be asked if you wish to delete objects or replace an existing object with the new one. Saving a melody in your phone A melody is saved in the Ringing and beeps/ Personalised ringing tone menu If you have just istened to it, press the righthand Key ee

Select it in the list and choose the Save option by pressing the lefthand key « (Options).

Messages Warning You must view the entire screen saver in order to be able to save it. MYX-1_EN-05messages.pmd 29 The space required as well as the space available in the phone are indicated. Ifthe maximum number of melodies or the maximum capacity has been reached, you will be asked if you wish to delete some melodies or replace an existing melody with the new one. This sign placed in front of a melody indicates that it can be deleted and will free enough memory space to save the new one This sign placed in front of a melody indicates that it can be deleted but wil not ree enough memory space 10 save the new one. Saving an animated screen saver on your phone An animated screen saver is saved in the Controls/ Customization/Screen Saver menu. I you have just viewed it, press the righthand key +.

Selectit in the list and choose the Save option by pressing the lefthand key « (Options). The space required as well as the space available in the phone are indicated. Hthe maximum number of animated screen savers or the maximum capacity has been reached, you wil be asked if you wish to delete some animated screen savers or replace an existing one with the new one.

Messages Saving an icon in your phone An icon is saved in the menu Ringing and beeps/Call groups!Call groups menu I you have just viewed the icon, press the righthand Key ee

Selectit in the list and choose the Save option by pressing the lefthand key « (Options). The space required as well as the space available in the phone are indicated. If the maximum number of icons or the maximum capacity has been reached, you will be asked if you wish to delete some icons or replace an existing one with the new one. Receiving WAP information (depending on model) Internet servers may send you information messages. In case the phone is not connected to the WAP, a aring message sent by SMS (preceded by te symbol @ in the list of messages). When selecting Read, the phone directly goes to the WAP function where a connection may be required for processing. Then you can read the information sent.

T9 mode is activaled as SOON as you create or modify a message. Language By default, the language used is that which is activated on the phone's menu display (or English if a language not supported by Éasy Message T9'“ is selected in the menu) AS you go along, depending on the keys pressed, the software looks in a dictionary for the corresponding words that are most frequentiy used. MYX-1_EN-05messages.pmd a Editing a message using Easy Message T9'" The Easy Message T9" function helps you to easily enter messages. Select the Text messages\Write new... menu and press OK. Selecting the editing language Select Options by pressing the lefthand key «scroll down to languages and press OK, then scroll down to the required Language and press OK. Using T9 mode Press the key corresponding to the letter required, compose the word by continuing to press the keys corresponding to the different letters, without worrying about the display, until the whole word is entered: it will appear in negative, white on black. I the word proposed corresponds to the one you are looking for, press 0 to validate it, create a space and go on to the next word. Iltis possible that there are several words in the dictionary that contain the same sequence of keys pressed. Ifthe word that appears is not the one you Want, press the central key to scroll through the words present in the dictionary, corresponding to this Séquence of keys. When you find the word you want, press 0 to validate, type à space and go on to the next Word

Messages I the word that you want does not appear in the dictionary, several additional modes allow you to vary the nature of the words entered. Additional entry modes The righthand key + selects one mode or another. The 123 mode inserts numbers. The ABC mode enters words that do not exist in the dictionary or in another language. To obtain a letter, hold doun the corresponding key. The letters and numbers scroll. Release the key when the required letter appears. The #key allows you to enter symbols. You wil see a page of symbols (there are several pages available by Scroling up or down) corresponding to the numbers 0 to 9. To select one of these, simply press the corres- ponding number key, ie, 6 for ? After the symbol has been entered in the text, the phone reverts to the previous mode The scroling arrows keys allow you to access to several symbol lists Capital letters You can ypo capital eters. by pressing the» oy before entering the relevant character. The following characters will automatically return to lowercase. Words in capital letters You can also choose to type a whole word in capital letters by pressing ice on the + key before entering the word. it is possible to return to lower case mode by pressing once on the + key,

Messages The number of messages storedin the SIM card changes depending on the SIM| card capacity; contact your Operator or your Service Provider. for further information. MYX-1_EN-05messages.pmd 33 Punctuation marks Punctuation marks are obtained by using either the 1 key (except in 123 mode), or using the Insert symbols mode (quick access using # Key). Accented characters Accented characters are automatically generated in the word in Easy Message T9“ mode. In ABC mode, you need to wall for he accented character to be displayed whilst holding down the comesponding key. Options available when writing a message Press the lefthand key + (Options) to view the various actions avallable: + Send your message + Store your message + Insert (depending on model) - images (already predefined inthe phone, call group icons or animated screen savers) - melodies (already predefined inthe phone or personalised) - symbols: the symbol attaches a of symbols (there are several pages available by scrolling up or down) corresponding to the numbers 0 to 9. To select one of these, Simply press the corresponding number key, ie, 6 for ? After the symbol has been entered in Îhe text, the telephone reverts to the previous mode.

Messages Press OK to insert the image or melody you have chosen. Press C to delete the image or melody already included in the text. Notes: - Predefined images and melodies are replaced by a code in the messages to reduce the size of the messages sent. To be able to view the images or listen to the melodies, the person to whom à message that includes inserted objects is sent must have an EMS compatible phone. + Languages: T9 mode can be used in different languages = Scroll to the required language and press OK, the T9 mode will use this selected language. + Formatting: the following options are available: - text alignment (this option applies to all the text typedin), - font size [the size applies to all characters typed in after you have selected the size), - style (for example, bold) (the style applies to al characters typed in aîter you have selected the style). Note: depencing on te font, cerlin les ar sys may not be available + De-activate Zoom + Cancel MYX-1_EN-05messages.pmd 4 23/09/2008, 16:30

Messages Options for messages in the list When a message has been selected from the list of messages, pressing the lefthand key + (Options) displays the following actions: » readit + sendit + delete » modify. When Write new. has been selected from the ist of NEA Es ino| messages, press he leftnand key « (Options) to: number of call required to send the + find out how much memory is available message. + delete the messages that have been read + delete al the messages + select a send option (acknowledgement, reply given, period of validity, message format) + enter the message centre number. Reply to a received message by selecting the relevant message from your list with the up and down key and then press the central # key.

Calls Look out for incompatibilies: for more information, consult your Operator or your Service Provider. The forwarding number to the messaging centre depends on the subscription type. Warning Cancellations of orwarding can cause paricular reactions in certain networks.

MYX-1_EN-060alls.pmd 36 Forwarding calls Forwarding voice calls Depending on your subscription, this service allows you to transfer incoming calls to another number or à mallbox. Scrol through the menu to activate the type of forwarding that you require: + Forward all voice calls: all incoming calls are fonwarded to a number you define + Forward all condtional calls + Forward calls when your line is busy + Forward calls when there is no answer on your extension after a period that you can definé by answering the questions on the menu + Forward calls when your phone is unavailable, outside of network coverage or switched off Enter the number to which you want to forward your calls. necessary include the area code you would use if you were calling the number from your phone. Valdate by pressing the rightand key A message on the screen confirms that fonwarding has been activated. You can also cancel all types of forwarding. You can view the status of a type of call forwarding in order to verify whether itis active or not. This function ao uslulor controing te number touch your calls are forwarded. The information supplied is provided by the network 23/09/2008, 16:30

Calls For services specific to a network, such as maiboxes, short diallng is only valid when covered by the particular network. You may possibly prefer an international number. This memory is linked to the phone and notto the SIM card. Several options are avallable for this number: Store tin your directory, send it short message, delete it. You can also delete the whole list of numbers. This data is purely indicative and does notrepresen proof. The metering criteria for the network can be 2pprecaby different (ndivisible minutes, eic.). MYX-1_EN-060alls.pmd 37 Forwarding data or faxes Depending on your subscription, this service permits you to transfer data or faxes that are addressed to you o another number. You can activate the data or faxes forwarding service, to enter the required number, cancel it and view the status of the service. Viewing the list of the last numbers used You can consult the list of the last numbers used {outgoing and incoming i available). To redial a number: Select from the list using the scrolling arrows. Make the call by pressing on 49. Shoricut:from ne standby screen, press on 4 Monitoring the duration and cost of calls (*) On the Counters menu you can view the duration of the last call and al calls made since the last deletion. The Delete durations menu enables you to delete the duration of the last call and reset to zero the total calls counter. On the Costs () menu you can viewr the cost of the last cal and al calls made since the last deletion:

MYX-1_EN-060alls.pmd The Delete costs (‘) menu enables you to clear the cost of the last call and to reset the cal counter after entering your PIN2 code The Display of duration menu enables you to select the duration display during a call. Displaying the numbers This menu permits you to see the status of the display numbers function for: + your identity (phone number) + the identity of the person calling you. Anonymous mode You can decide whether the person you are calling is given your phone number or not + Preset: the phone network default mode. + No: you do notwish to use the anonymous mode and the person you are calling vil know your number. + Yes: you wish to use the anonymous mode and the person you are calling cannot know your number. Your number + On outgoing calls you can check that your phone number is displayed on the phone of the person you are callng (CLIR). + On incoming calls, you can check that the telephone number of à phone to which you are transferring calls will appear on the phone of à person calling you (COLA) 23/09/2008, 16:30

Call waiting You can activate, deactivate and view the status of the call waiting service in order to check whether iis active or not. MYX-1_EN-060alls.pmd æ Callers Number + On outgoing calls, you can see the phone number to which your call is being transferred (COLP) ifthe person you are calling has authorised his or her identity to be displayed by deactivating the COLR option. + On incoming calls, when it is activated, this function displays on Your phone the phone number of the person calling (CLIP). This function is only possible if he caller has authorised his identity to be displayed by deactivating his CLIR option. Authorising double call (Service depending on the operator) During a call a special tone can inform you that another caller is trying to reach you. The caler s number - and name, if stored - is displayed on the screen. During a call, when pressing the central key, the lefthand key » changes function and gives access to diflrent possibilties of actions with this call Configuring automatic redial You can activate automatic redial either by default or on demand.

MYX-1_EN-060alls.pmd Blacklist The blacklst is used to limit falures on automatic calls (calls generated by the automatic redial function or by applications: data, fax for example) When several automatic call failed with a number {number busy or unknown), this number is put in the blacklist and no automatic call will be done with this number any more until you delete it from the blacklst Note: this function does not apply to te calls performed manually. Voice mail number To program a special permanent call number, type in this number and validate. This number is used when calling the voice mail centre with the programmable keys. Local information distribution This menu allows you to activate and select reception of information distributed by the network. Replacing the international prefix (Depending on model) In the event that a cal is not possible with the “+ prefix, you have the option of choosing à replacement prefix with no need to change the number(s) already recorded with the prefix + in the directory. 26/09/2008, 08:57

Calls Placing calls on hold (Service depending on the operator) Warning During a call, you can put the current call on hold by In this case, pressing £ ends all call. pressing OK. During a call, when pressing the central key, the lefthand key » changes function and enables you to access différent options for the call Multi-conferencing (*) {Service depending on the operator and depending on model) Mult-conferencing enables you to talk to sovera calers (depending on the network capacity and on the model). A mult-conference is limited to 6 participants: 5 in a mult-conference and one additional call During a call, when pressing the central key, the lefthand key » changes function and gives access to difirent possibilties of actions with this call Standard commands Sequences of standard keys also permit access to services such as call notification, call holding, multi- conferencing, and open up additional possibiities: 0 4 Rejecta call holding or waiting (or mult-conference cal). 1% Endihe current call holding or waiting (or the multi- conference call if there are any) and accept the call (or mult-conference calls). 1X4 Endthe current call order number X.

I] + LR MYX-1_EN-060alls.pmd a 23/09/2008, 16:30

2% Place onhold the current call (or muli-conference calls) and acceptthe call holding or waiting (or multi conference calls). 2X% Place on hold the mult-conference call except for the current call order number X (private call 36 Add a call holding (or multi-conference calls) to the current call (or to the multi-conference). Tel N° # Place on hold the current call (or the mult-conference calls) and call another phone number. Note: I you use this feature, we recommend that you first place the current caler on hold, then dial the new number as a courtesy to your caller and to ensure privacy with the other party if desired. { End all calls except for a possible call waiting.

nging tones There are numerous lunes avalable {including a ‘silent ringing tone”) and several Volume levels including à crescendo. MYX-1_EN-07ringtones.pmd 43 Selecting the volume and the type of ringing tone You can set your phone to ring on receiving calls and/or messages. You can, during adjustment, listen to the melody selected or not: activate or deactivate bypressing the central key the symbol ad appears barrëd or not. Selectthe ringing tone required using the scroling arrows. Press the righthand key + + to move on to the next section. Selectthe volume required for using the phone with the scroling arrows (from + to 4 and + for the volume crescendo) and validate using OK. Press the righthand key + » to move on to the next section. Select the volume required for using the hands free car or pedestrian kit with the scrolling arrows (from 1 to 4 and + for the volume crescendo) and validate using OK. Call groups See chapter How to use the directory for all the functions about call groups. Downloaded icons If you have saved icons received by message (s£e Text messages chapter), they will appear in the menu Ringing and beeps/Call groups/Call groups menu. 4

I you select an icon in the list, it will appear at the top ofthe screen. You can then delete it or select one of the following options: + change its title + consult the available memory + delete the selected icon + delete all saved icons. Personalising the ringing tone You have the option of creating a personalised call tune. À help menu, accessible by pressing the righthand Key ++, will guide you. If you have saved melodies received by message (see Messages chapter) they will appear in that menu. You can then modif the selected melody (ifthe copyright allows i) listen to it or select one ofthe following options: + change its title + send it by message to another person [ifitis not Copyright protected) + consultits memory capacity + consult the available memory + delete the selected melody + delete all melodies. I] + LR MYX-1_EN-07ringtones.pmd 4 23/09/2008, 16:30

ging tones Wherever you require your call to arrive discreetly, you can use the vibrator or select the silent mode. Silent mode is automatically deactivated when the hands free car kit is connected as well as when the phone is switched onvof. You çan sleetie ones produced by your keypad: Beep, DTMF (musical keys) or non active tones (in this last case, when you press your keyboard, it does no Mae à 0 MYX-1_EN-07ringtones.pmd 45 Setting the vibrator (depending on model) Using the scrolling keys, select one of the following options: inactive vibrate, only vibrate, vibrate and ring, vibrate then ring Validate by pressing the righthand key » » Selecting silent mode (depending on model) I you want the ringing tone of your phone to be replaced by the vibrator and the beeps to be suppressed {except for the alarm tone), tickthe box and validate by pressing OK You can also activate/deactivate the silent mode by holding doun the + Ÿ key, This mode is indicated by the symbol À on the screen. Setting the beeps Different controls are available: Setting the keypad tones Selectthe tone required using the scrolling arrows and validate (press the righthand key +) Setting the network tone I you want your phone to give a waming beep when it locates a network on which it can communicate: Tick the box and validate by pressing OK.

Setting the low battery tone I you want your phone to give a warning beep when your battery is low: Tick the box and validate by pressing OK. Deleting DTMF tones {Depending on model) You can delete the emission of DTMF tones during à call. You can thus make a call in à comiortable and discreet way for you caler. To be discret, clear the selection from the box. Validate by pressing OK.

capacity, set the maximum interval. The frequency of display of the screen saver has a direct impact on the phone's operating capacity. For optimal operating MYX-1_EN-08settings.pmd

Customizing your phone Installing the energy saving mode In order not to use the phone's screen light and hereby increase its operating time: In the Customization/Energy saving menu, check No light and press OK to validate. Configuring the idle mode You can choose between an animated idle screen or the economy mode Inthe Customization/Screen Saver menu, use the scroling arrows to selectthe animation you want, à text, a banner or the economy mode. Press the righthand key + » to access the setting of the animation or economy mode activation interval. Press OK to validate. To exitthe animation or economy mode, press +. I you have saved animated screen savers received by message (see Messages chapter), they will appear in that menu. The following options are available according to the type ofscreen: + validate the animated screen savers as default screen + change its title (only downloaded screens) + consult its memory capacity + consultthe available memory

The action allocated to a programmable key is triggered by a long press or two short presses only from Îhe standby screen. MYX-1_EN-08settings.pmd 48 + consultthe available memory

• delete the selected screen

• delete all screens. Personalising the welcome screen {Depending on model) You can personalise the welcome screen of your phone by typing a text. Validate by pressing OK. Customizing the programmable keys {Depending on model) This menu, accessible directly by a short press on a programmable key from the standby screen, enables Vou to configure the lefthand + and righthand » » keys. There are different possibilties for each ofthe keys: Directory Validate Directory. When you press the key, you can see the names in the directory. Rapid dial Select a name from the directory and validate. When you press the key, you will automatically call the name selected 23/09/2008, 16:30

Settings Silent mode À This mode, indicated on the screen saver, is automatically deactivated/ activated when the hands free kit is connected. MYX-1_EN-08settings.pmd 4 Silent mode (depending on model) Validate Silent mode. The ringing tone of your phone will be replaced automatically by the vibrator and all the beeps will be suppressed (except for the alarm). Call voice mail Validate Call voice mail. When you press the key you wi automatically cal your mailbox number. Text messages Valdate Text messages. When you press the key you can read the short messages stored in the SIM card or in the phone itsel. View calls Valdate View calls When you press the key, you can view the list of the last calls made and received if available. Selecting the display language You can select the language in which you wish your phone display to operate: Select Automatic The display language wil be that of your SIM card (if available).

Network When your home network is not accessible (abroad, or example), your phone automatically searches for another available and authorised network in the order of preference indicated by the list on the SIM card.

MYX-1_EN-08settings.pmd 50 Otherwise select the language of your choice using the scroling arrows and validate by pressing OK. Select the type of response You can reply to a telephone call: either automaticall, i you have ticked the Automatic ans. box (for a hands free kit) and validated by pressing OK or by pressing any numeric key if you have ticked the Any Key and Validated by pressing OK. Selecting the network Every SIM subscription card can store an ordered list of preferred networks. I the list has not been programmed, or if none of the networks on the list are available or authorised, the phone searches for an authorised network providing the highest level of signal. I none of the avallable network is authorized, you can use your phone to make emergency calls only until à network connection can be re-established. I no network is available, your phone continues to search for one In all cases, the phone searches for its home network first. 23/09/2008, 16:30

Settings Depending on model, you can choose à manual selection for a network search. MYX-1_EN-08settings.pmd si Available networks This menu enables you to start a search for all available networks at the present location and to display them. Use the scroling arrows to scroll the available networks and validate the one wanted (press the righthand key se). Preferred networks To program a list of preferred networks into your SIM card: Use the scrolling arrows to select from the list. Validate. Ifthe network is not on the list, select the country code then the network code (ask the organisation from which you obtained the SIM card) Setting the time and date Setting time/date/Control menu Set the hours and minutes by pressing on the corresponding numbers or by scrolling through the values using the w or A arrows. Press the righthand key « » to go to the next setting. Set the day, month and year. Press OK to validate. Setting ime/date/Display menu

Use the scrolling arrows to select the type of clock to be displayed on the screen or to display no clock. Press OK to validate. Controlling screen contrast Control screen contrast using the scroling arrows, and validate by pressing OK. Converting currencies This menu enables you to convert one currency into another. Using the scroling arrows, you can select: Rapid exchange If you tick the Rapid exchange box, the converter will operate on the standby screen, enter the digits required anduse the scroling arrow to perform a conversion Exchange rate Enter the conversion rate corresponding to the two selected currencies. Currencies Enter the symbols of the two currencies to convert. A long press on C retums to the beginning of the line to enter them (ifthe symbols are already entered).

eCUI Locked keyboard You can still make emergency calls and| answer cal. For a quick Keypad locking, press + then OK from the standby Screen. Warning I the wrong PIN code is entered three times in a row, the card wil be locked. To unlock your card, call the organisation which issued your card for guidance in unlocking it. I your SIM card is permanentiy locked, contact your Operator or your Service Provider to obtain a new card MYX-1_EN-09security.pmd sa Locking the keyboard This menu enables you to lock your phone's keyboard to prevent cals from being made unintentionally in your bag or pocket Tick the Lock box: the keyboard will automatically be locked. To unlock your keyboard: Press # then OK. After unlocking, the keyboard wi be locked after a certain period. Changing the PIN number You can change your PIN number: To the question: Old pin number ?, enter your old PIN code and validate (press the righthand key») To the question: New pin number ?, enter your new PIN code [a number beimeen 4 and 8 cigis) and validate by pressing OK. To the question: Verify pin numb. ?, enter your new PIN code a second time to verify and validate by pressing OK. Checking the PIN number You can activate your PIN number so that it is requested and checked every time the phone is switched on, so that if the phone is lost or stolen, your SIM card cannot be used: To the question: Pin number ?: enter your PIN number and validate (press the righthand key

The phone code is a secret code, intended to protect the phone in the event of theft. I is linked automatically to the SIM card present on activation.

MYX-1_EN-09security.pmd 54 Tick the box Pin num. control and validate by pressing OK. Changing the PIN2 number (*) You have a second PIN number. The procedure for modifying the PIN2 number is identical to that for the PIN number. Changing the phone code The Phone code menu enables you to activate the phone code so hat i is requested and checked each fime the phone is switched on, in the case of a diflerent SIM card being used Ifthe incorrect code is entered, the time interval between each attempt increases, making use impossible. To change the phone code, you must first check that itis active (Control phone code menu) To activate: To the question: Phone code?, enter 0000 and validate (press the righthand Key +) Tick the Phone control box and validate by pressing OK. To deactivate: To the question: Phone code?, enter your code (possibly changed) and validate (press the righthand Key +) Do not tick the Phone control box and validate by pressing OK: it will reset the code to 0000.

Access lo Ihis service depends on your subscription type. For more information contact your Operator or Service Provider. The restriction can apply to ALL incoming calls or to incoming calls when you are not in your home country {if you have roaming) MYX-1_EN-09security.pmd 55 Once the phone code is activated, you can modify it: T the question: OI phone code?. enter your old phone code and validate (press the righthand Key +.) To the question: New phone code? enter your new phone code (a number of between 4 and 8 digits) and validate by pressing OK. To the question: Verif. phone code? enter your new phone code a second time to verfy it and validate by pressing OK. Changing the operator password (*) Depending on model, you have an operator password supplied by the network operator. The procedure for modifying this password is identical to hat for your PIN code Limiting incoming calls (*) Depending on your subscription, this service enables you to restrict certain types of incoming calls. If you have this service, you will have been provided with a password when you subscribed. This password is necessary to activate this function. You can activate, deactivate, and view the status of the type of call barring. You can also cancel ALL types of barring

Security Access lo {his service depends on your subscription type. For more information contact your Operator or Service Provider. The restriction can apply to ALL gugong cale o al our RNATIONAL outgoing calls or to outgoing international calls EXCEPT those sent to your HOME country. This directory is linked to the SIM card. Thus, is size is determined by limitations of this card!

MYX-1_EN-09security.pmd 56 Limiting outgoing calls (*) Depending on your subscription, this service stops certain types of outgoing calls being made from your phone. If you have this service, you will have been provided with a password when you subscribed. This password is necessary to activate this function. You can activate, deactivate, and view the status of the type of call barring. You can also cancel ALL types of barring Setting up the pre-set directory (*) The pre-set directory allows you to limit calls. When you activate this directory, only the numbers you Store in this directory can be called. Before creating it, you must first activate it: Display the Pre-set directory menu. Enter your PIN2 number. Tick the Pre-set directory box. Validate by pressing OK. To create the pre-set directory, proceed as you would proceed for another directory (see chapter How to use the Directory/Storing a number) 23/09/2008, 16:30

Security Warning These functions depend on the ability of the network to send charge data to your phone in real time, and on the capacity or options on your SIM card. MYX-1_EN-09security.pmd 57 Charge checking (*) The Settings menu allows you to select the type of charge indication alter entering your PIN2 code: - Currency: enter the currency name (maximum 3 characters) and charge pêr unit. Ask your operator for this value. - Telephone unit The Limitation menu allows you to activate the credit function in the selected currency alter entering your PIN2 code. Confidentiality messages The function Confidentiality messages allows you to delete automatically the numbers recorded in the Call Services menu and the text messages that are in the phone's memory when a new SIM card is inserted. This function is activated/deactivated in the menu Confidentiality messages.

Accessories central key

#or#or@ or ++ The alarm function is represented on the screen by the symbol À. Permanent flashing of this symbol indicates that an alarm time has been programmed but the date and time lock has not been initilised

MYX-1_EN-t0accessories.pmd 58 Calculator You can operate the calculator using the following keys: Add Subtract Multiply Divide Equals Delete Long press on: Decimal point Monetary operations if there is no calculation in progress (See chapter Phone adjustment) Monetary conversion From the standby soteen, Yo can convert a curency into another according to the settings chosen (calculator key «+ } or menu (Controls/Currency converter). Setting the alarm To use your phone as an alarm clock: Using the numbers or the scroling arrows, setthe alarm time. Press the righthand key + » to go to ihe next tem. Set the minutes. Tick the box and validate by pressing OK. 23/09/2008, 16:30

Accessories To use your phone with a hands-free Kit, see the notes supplied with the Kit This delay starts counting down as soon as the end of a call is detected MYX-1_EN-t0accessories.pmd se The ringer is stopped by pressing any key: the alarm remains programmed. The alarm function remains active when the phone is switched off. It is not affected by silent mode. Setting the timer The same procedure is applied as for the alarm function, but in this case you start a time clock running against a defined value. The phone must remain sitched on. Configuring your phone with a car kit {Depending on model) As regards the phone, there are several options: Programming the switch-off delay on your phone Set the phone of delay using the numbers or scrolling arrows. Press the righthand key. » to go to the next tem. Tick the box and validate by pressing OK.

Accessories This can only happen when the vehicle is not running.

MYX-1_EN-t0accessories.pmd 60 Programming the alarm timing You can be notified that your phone is rnging when you are not in Your car. For an external warning, set the delay using the digits or scroling arrows. Tick the box and validate by pressing OK. Data parameters You can setthe serial Iink speed when using AT commands. 23/09/2008, 16:30

WAP (depending on model) Depending on model, scroling menu 0 allows you to access the WAP function. When navigating in WAP, you can return to Menu Services at any time by pressing the green key . Bookmarks enables you to record à directory of Internet site names and addresses for easy and fast access. WAP: Wireless Application Protocol — This is a protocol which converts Intemet language into the language which can be understood by à mobile prone he WAP browser is licensed from: RSA The WAP browser remains the exclusive property of Openwave. I is therefore highly prohibited to modity, translate, reverse engineer, de-compile or disassemble the browser or any part thereof. MYX-1_EN-t1WAP.pmd G] The WAP function allows connection to Internet sites. Thus, you can connect to sites, among others, which allow dounloading of melodies, icons or animated screen savers. The WAP menus From the standby screen, press on the central key @ to access the local menu for WAP functions. The Services menu, pop-up menu, may be displayed at any time when navigating in the WAP function. Ît contains the following sub-menus: Home: connection to the home page. Bookmarks: from the standby screen, following a number key with the central Key @ initiates access to the favourite corresponding with the number. You can receive bookmarks by message and add them to this list (see Text messages chapter). You can also send some by message: select a bookmark, press the lefthand key « (Options) then select Send by SMS. Go to the URL: this menu enables you to directly enter an Internet address: Inbox: this menu enables to read the messages sent by the Internet site. Reload: updating of the current page. Reset cache: empties data stored from previous connections. Advanced... see $ Configuration of parameters About... Information about Openwave"". Exit retum to the phone standby screen.

WAP (depending on model) Al of the information to be entered in the settings is supplied by your operator or service provider.

MYX-1_EN-t1WAP.pmd & Configuration of parameters Advanced... menu: access to sub-menus: + Connection settings which allow you to set the parameters for several access providers {depending on model). The current access service has a star in front of it Configuration of WAP parameter - Select the desired access service using the scroling arrows then press on Modify (lefthand key +) - Enter the name of the service then validate. - Enter the internet address of the home page then validate. - Enter the connection settings. - Press on Details {lefthand key +) à user name, à password, the IP address of the WAP gateway: enter the IP number using the central key @ (Next) then choose Secure or Non secure. the call number, the access mode (digital or analog) Once all the parameters are entered, you can activate the selected service. - Confirm your choice with OK. 23/09/2008, 16:30

WAP (depending on model) When connecting on the GSM network, the @ character lashes, and the cost of communications starts to clock up as soon as it stops flashing. MYX-1_EN-t1WAP.pmd 63 + Show URL which presents the current Internet address. + Disconnect which ends the communication (allows: à navigation without being connected). + Circuit prompt which enables to activate or not the connection confirmation message at each connection attempt. + Linger timer enables you to set a time limit, after which the phone will disconnect automatically i you have forgotten to disconnect from a service. + Security which enables a server identification by the phone for security reasons. + FastW@p (depending on model) which provides quicker access to the pages of Internet sites. Connection From the Home menu, start up connection to a service. Once connected to a service, press on Y then [Menu] to return to the local menu. Downloading objects You may connect to some Internet sites, allowing download of melodies, icons or animated screen savers. Once downloaded, they are in the inbox. Then, you can save them in your phone (same procedure as the one for SMS download).

WAP (depending on model) You wi be automatically disconnected after a short pause if you have forgotten to disconnect from a service.

MYX-1_EN-t1WAP.pmd 64 Disconnection Disconnection is achieved by pressing on W then {Menu and then by ueing the Advanced. menu and isconnect. The @ character disappears from the sreen Exit from the WAP function To ext from the browser and end the current communication (if necessary): - press €

- from the local menu, select Quit and validate by pressing OK. Icons The_Y icon enables you, by pressing the central key @, to access two display modification possibilties: - the zoom to change the size of characters by pressing on the lefthand key + succesively, - full screen display by pressing on the righthand key ve. 23/09/2008, 16:30

Games Depending on the model, several games are available The presentation menu guides you on how best to use them.

Available accessories Warning Do not connectdisconnectthe special socket on your phone during a call The use of the EXTERNAL SIGNAL function to activate the lights on a vehicle or the ho, in order to take a call on a public road, may not be authorised Warning Certain chemical products can damage plastic. Do not use aerosols, certain Special cleaning products, corrosive products, solvents, alcohol and detergents.

MYX-1_EN-t3acess-upkeep.pmd 66 Available accessories Depending on the model, different accessories are available on your phone: + Additional batteries + Additional chargers + Desk charger + Cigarette lighter adapter + Handés-free kits + Front and back covers in different colours + A cable for data exchange between your phone and a PC (depending on model). Upkeep Clean your phone using a soft slightiy damp non fluffy cloth. Battery After a long period of non use (several months), when the charger is being connected, the unit might not switch on. In this case: Disconnect the charger, wait a few seconds, and plug it in again It may be necessary to repeat this several times. Maintenance menu This menu contains information that you could be asked for to perform specific operations. lthey are required, you wil| be shown how to find information you need

CE marking on the unit conforms to directives 1999/5/EC, 89/336/CEE and T3/23/CÉE. MYX-1_EN-t4recommendations.pmd 67 The use of your phone is controlled by safety regulations intended to protect both the user and his/ her environment. Electrical safety Only use the appropriate chargers contained in the manufacturers catalogue. Using another charger could be dangerous and will invalidate the manufacturers warranty. The main plug socket must be easily accessible. The main voltage should correspond to that given on the manufacturers plate on the charger. Aïirplane safety 1 an arplane your phone must Be suitched of to ensure that it does not interfere with the planes systems. Is use is illegal and you could be prosecuted or banned from using cellular networks in the future if you do not abide by these regulations. Areas containing combustibles IL is advisable to switch your phone off in the vicinity of gas stations. Regulations limit the use of radio equipment in chemical factories, gas depots and any area where there are mines. You are advised to abide by these rules.

Recommendations Warning Ensure that no part of your body is permanenty close to the aerial unless there is a metal screen (e.g.: a vehicle oo …)

MYX-1_EN-t4recommendations.pmd 68 Road safety Except in an emergency, do not use your phone when driving_ without a hands-free kit that enables you to maintain your freedom of movement. Always keep your eyes on the road when you are driving To make a call, pull to the side of the road, then make your call. Abide by the current laws: The phone must be shielded suffcientiy from gleconi equipment in he vehicle. ives of micro- waves, which may affect the operation of such equipment. Installation of your phone in a vehicle must only be perlormed by qualified personnel. Non ionising radiation To obtain maximum satisfaction from your phone, use it in a vertical position. Your personal safety can only be improved by doing so. Electronic medical equipment Your phone emits radio waves that could possible interfere with electronic medical equipment, for example an auditory prosthesis, heart pacemakers, … our doctor or the manufacturer of the medical item will be able to advise you on whether your phone could cause such interference. In hospitals, the phone must be switched off 23/09/2008, 16:30

Recommendations General precautions Do not attempt to open your phone and repair it yourself. The manufacturer cannot be held responsible for any damage/accident that may result from this. Any Mk card out by non-authañsed personnel will invalidate your warranty. Do not use your phone in damp areas (bathroom, swimming pool, …). Protect it from liquids and other moisture. Do not expose your phone to extreme temperatures {from - 10°C to + 55°C) Do not leave your phone within the reach of small children (certain removable parts may be accidentally ingested). Use your phone with original accessories, or your warranty vil be rendered invalid. The physicochemical processes created by chargers impose temperature limits when charging the battery. Your phone automatically protects the batteries in extreme temperatures. Removing the battery may mean that the time is lost You are strongly advised not to connect your phone to the charger if it doesn't contain a battery. To avoid the risk of demagnetisation, do not let electronic devices close to your phone for a long time.

MYX-1_EN-t4recommendations.pmd

SAGEM SA cannot be hold responsible for the contents of messages, programs and downloadable object and for the direct or indirect damage which may be cause to the user of the phone or {he phone itsel. Note on downloading facilities Your mobile phone allows you to download ringtones, icons and animated screen savers. You must check that Inese objects are free of copyright. SAGEM is not responsible for the content of downloaded objects Some of these objects may contain data which may cause malfuncton or loss of data within your mobile phone ie, a virus). For this reason, SAGEM declines all responsibility for (1) he receplion of data that has been downloaded or loss of said data, (2) the consequences on the operation of the mobile phone and (3) damage resulting from the reception of said dovnloaded data or loss of said data, Moreover, SAGEM draws attention to the fact that problems caused by the reception of downloaded data that does not comply with SAGEMS specfications are not covered by the guarantee. Consequentl, the cost of diagnosing and repaing mobile phones affected by said downloaded data wil be charged to customers. ‘The software program developed by SAGEM remains the exclusive property of SAGEM SA. tis therefore high prohibited to modif, translate, de-compile or disassemble this software program or any part thereof.

Technical Characteristics MYX-1_EN-15charactech.pmd

Weight: 92 g Size: 106x46x20 mm Volume: 78 cm Original battery: Lithium lon 680 mAh, 720 mAh or 780 mAh (depending on model) Battery life calls/standby: up to 3h30/300 h The technical characteristics of the product are subject to change without notice This mobile phone complies with European requirements regarding exposure to radio waves Your mobile phone is a radio transmitter and receiver. lt is designed and manufactured not to exceed the limits for exposure to radio frequency (RF) energy recommended by the Council of the European Union and ICNIRP. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines were developed by independent scientific organisations through periodic and thorough evaluation of scientific studies. The limits include a substantial satety margin designed to assure the saety of all persons, regardless of age and health The exposure standard for mobile phones employs a unit of measurement known as the Speciic Absorption Rate, or SAR. The SAR limit recommended by the Council of the European Union and the ICNIRP is 2.0 Wkg' “The SAR limit for mobile phones used by the public is

2.0 watts/kilogram (Wkg) averaged over 10 g of tissue.

The limit incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. SAR values may vary in diferent regions on the world, depending on national reporting requirements and the network band.

Technical Characteristics

MYX-1_EN-15charactech.pmd

Tests for SAR have been conducted using standard operating positions with he phone transmiting at its highest certified power level in al tested frequency bands. Although the SAR is determined at the highest certfied power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a base station antenna, the lower the output. Before a phone model is available for sale to the public, compliance with the European R&TTE directive must be shown. This directive includes as one essential requirement the protection of the health and the safety for the user and any other person. This highest SAR value for this model phone when tested for compliance against the standard was: 0.64 Wkg. While there may be differences between the SAR levels of various phones and and at various positions, they all meet the EU requirements for RF exposure. Advice for limiting exposure to radiotrequency (RF) fields: For individuals concemed about imiting their exposure to RE fields, the World Health Organization (WHO) provides the following advice: Precautionary measures: Individuals: Present scientific information does not indicate the need for any special precautions for the use of mobile phones. individuals are concemed, they might choose to imit their own or their children's’ RF exposure by limiting the length of calls, or using «hands-free» devices to keep mobile phones away from the head and body. Further information on this subject can be obtained from the WHO home page http’{wwwmho.intipeh-emf WHO Fact sheet 193: June 2000

Troubleshooting Problem - Situation The phone does not turn on No network recognised Calls to a messaging service or voice server do not get through Unable to turn the phone on Error message:

BATTERY STATUS NOT KNOWN

Error message: LOW BATTERY MYX-1_EN-16dépannage.pmd 78 Actions Remove the battery and then replace it

Connect the phone to the charger (check that this is plugged in) for approximately 5 minutes. Remove the SIM card. Check that there is no dust or rit in the SIM slot. Replace the SIM card being sure 10 push it right up to the stop point. Check in the Ringing and beeps/Tones menu that the box is ticked. Charge the phone for 15 minutes before turing it on. Check the battery charging indicator: cycling: charging normally not cycling: disconnect the charger, re-connect and then check the battery charging indicator: ii is stl not cycling, disconnect the charger and re-connect several times. Ithe battery is st not charging, contact the after sales service. When the battery charging indicator is continuously on, the battery is fully charged. The battery pack is not recognised by the phone Check that the battery pack is correcty fited in the phone. This message is displayed when the battery charge is too low. The phone turns off automatically. Charge the phone.

MYX-1_EN-16dépannage.pmd 74 Actions Check that the SIM card has been inserted correctly. Examine the SIM card. fit is damaged, contact your mobile phone operator sales point. f the message is stll displayed, contact the after sales service. The PIN has been incorrectly entered. lf the PIN is entered incorrectly three times, the SIM card is blocked. The PIN has been incorreclly entered three times. Use your Personal Unblocking Key (PUK) to unblock the SIM card. Enter:

PUK: your PUK code supplied by your mobile phone operator. PIN: your PIN code. After 10 (or 5 depending on the type of SIM card) unsuccessful attempts, the SIM card is blocked permanentiy. You must then contact your mobile phone operator to get a new card. The mobile phone operator may require certain types of SIM card to be used. This message indicates that the SIM card is not accepted. Remove the SIM card and turn the phone on again. If you get the SIM not present error message, check With Your phone dealer whether your SIM card is compatible. Otherwise, contact the after sales service. 23/09/2008, 16:30

Troubleshooting Problem - Situation The phone display does not change No connection made Unable to receive calls MYX-1_EN-16dépannage.pmd 75 Actions Press a key. If nothing is displayed, check the position of the SIM card. If the problem continues, contact the after sales service. Check the form of the number called. Check that there is at least one field strength dot showing. FR is displayed but there is no mobile phone operator name, only emergency calls are allowed. Check that you have not used all your credit with the mobile phone operator. Check that the SIM card provides the service you required and that it has not expired Check and, if necessary, disable the outgoing call lock. The network is saturated. Please try later. If you still have problems getting a connection, contact the Hotline. Try to make a call to check that the phone and the network are operational. Check and, if necessary, disable the permanent call redirection (permanent call redirection icon displayed) Check and, if necessary, disable the incoming cal lock. If you still have problems receiving calls, contact the Hotine.

MYX-1_EN-16dépannage.pmd 76 Actions Check that the SIM card provides this service. Check that the message server is correctiy set up. Try to make a call to check that the phone and the network are operational. Try sending the message later. Check that the SIM card provides this service. Set up the redirection to the voice box using the information provided by the mobile phone operator. 23/09/2008, 16:30