HX330 - Heating BLACK & DECKER - Free user manual and instructions
Find the device manual for free HX330 BLACK & DECKER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Fan heater |
| Brand | Black & Decker |
| Model | HX330 |
| Power | 2000 W |
| Power supply | 220-240 V ~ 50 Hz |
| Dimensions (L x W x H) | 25 x 20 x 15 cm |
| Weight | 1.2 kg |
| Adjustable thermostat | Yes |
| Overheat protection | Yes |
| Automatic shut-off on tipping | Yes |
| Oscillation | Yes |
| Remote control | No |
| Timer | No |
| Removable filter | Yes |
| Noise level | 45 dB |
| Maintenance | Clean with a soft dry cloth |
| Warranty | 2 years |
| Country of manufacture | China |
Frequently Asked Questions - HX330 BLACK & DECKER
How to turn on the HX330 heater?
Plug the device into a mains socket, then turn the temperature adjustment knob or press the on/off switch depending on the model. An indicator light shows that it is powered on.
The heater does not heat up, what should I do?
Check that the thermostat is set above room temperature. Make sure the device is not in standby mode or that the tip-over protection has not been triggered. If the problem persists, contact customer service.
Can I use the heater in a bathroom?
No, this heater is not designed for use in humid environments. Use it only in dry, well-ventilated rooms.
How to clean the HX330 heater?
Unplug the device and let it cool down. Use a soft dry cloth to wipe the exterior. The removable filter can be cleaned with a vacuum cleaner or soapy water, then dried before putting it back.
The heater makes noise, is this normal?
A slight ventilation noise is normal. If you hear clicking or excessive noise, check that the device is on a flat surface and that nothing is blocking the air grilles.
What is the maximum heating area?
For a 2000 W heater, the recommended area is about 20 to 25 m² for a well-insulated room.
Can I leave the heater on all night?
It is not recommended to leave the device unattended for long periods. Use the thermostat function to maintain a constant temperature, but do not let it run while you are away.
How to reset the tip-over protection?
Place the heater on a stable surface and straighten it. The protection resets automatically. If the indicator remains off, unplug and replug the device.
The power cord is short, can I use an extension cord?
It is better to plug directly into a wall outlet. If an extension cord is necessary, use one suitable for the device's power (at least 10 A).
Where to find spare parts?
Contact Black & Decker customer service or check the list of authorized centers on the official website. Spare parts such as the filter or cord are available.
User questions about HX330 BLACK & DECKER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heating in PDF format for free! Find your manual HX330 - BLACK & DECKER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HX330 by BLACK & DECKER.