SBE87TX00G - Dishwasher BOSCH - Free user manual and instructions
Find the device manual for free SBE87TX00G BOSCH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Dishwasher |
| Brand | Bosch |
| Model | SBE87TX00G |
| Height (cm) | 86.5 |
| Width (cm) | 45 |
| Depth (cm) | 63 |
| Weight (kg) | 46 |
| Power Supply (V/Hz) | 220-240 / 50 |
| Power Consumption (kWh/100 cycles) | 92 |
| Water Consumption (L/cycle) | 9.5 |
| Noise Level (dB(A)) | 44 |
| Energy Efficiency Class | E |
| Place Settings (max) | 10 |
| Programs | Eco 50°C, Intensive 70°C, Auto 45-65°C, Quick 45°C, Delicate 40°C, Pre-Rinse |
| Special Functions | Extra Dry, Speed Perfect, Half Load |
| Water Heating Type | Flow-through heater |
| Drying System | Heat exchanger with mineral |
| Interior Material | Stainless steel |
| Self-Cleaning Filter | Yes |
| Child Lock | Yes |
| Leak Protection | AquaStop |
| Salt Container Capacity (kg) | 1.5 |
| Rinse Aid Indicator | Yes |
| Spare Parts Availability | 10 years |
Frequently Asked Questions - SBE87TX00G BOSCH
How do I reset the Bosch SBE87TX00G dishwasher?
To reset, press and hold the Start button for about 3 seconds until the display shows '0:01'. Then close the door. The program will cancel and drain.
What should I do if the dishwasher doesn't start?
Check that the power cord is plugged in, the door is fully closed, and the water supply is open. Also ensure the child lock is not active.
How do I clean the filter?
Turn the coarse filter counterclockwise and lift out. Rinse under running water. Remove the fine filter and clean both. Reinstall by pressing down and turning clockwise until it clicks.
What does the E:15 error code mean?
E:15 indicates a water leak. The AquaStop system has activated. Turn off the water tap, unplug the machine, and contact customer service.
How do I add rinse aid?
Open the rinse aid dispenser cap. Fill with liquid rinse aid up to the MAX mark. Close cap until it clicks. Adjust dosage dial if needed (1-6).
Why are dishes not drying properly?
Check that rinse aid is filled and dosage is adequate. Select Extra Dry function. Use plastic-safe cycle. Avoid overloading.
How do I enable the child lock?
Press and hold the Eco button for 3 seconds until the display shows a key symbol. To disable, repeat the same action.
What detergent should I use?
Use powder, gel, or tablets designed for automatic dishwashers. For best results, use separate salt and rinse aid.
How do I clean the spray arms?
Remove the top spray arm by pulling up. Remove the lower spray arm by pulling upward. Rinse under water, clear clogged holes with a toothpick. Reinstall fitting into place.
What is the maximum water hardness setting?
The water hardness can be set from H:00 (very soft) to H:07 (very hard). Default is H:03. Adjust based on local water hardness test.
User questions about SBE87TX00G BOSCH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual SBE87TX00G - BOSCH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SBE87TX00G by BOSCH.