SC07F50HV - Vacuum Cleaner SAMSUNG - Free user manual and instructions

Product Type	Canister Vacuum Cleaner
Model Number	SC07F50HV
Brand	Samsung
Energy Efficiency Class	E
Annual Energy Consumption	52 kWh/year
Carpet Cleaning Performance Class	C
Hard Floor Cleaning Performance Class	C
Dust Re-Emission Class	A
Sound Power Level	80 dBA
Rated Input Power	1300 W
Filter Type	Washable dust filter + non-washable outlet filter
Dust Bin Capacity	Approx. 1.0 L
Power Cord Length	Approx. 6 m
Weight	Approx. 4.5 kg
Dimensions (L x W x H)	Approx. 40 x 25 x 30 cm
Main Control	Body power switch with slide power control (MIN-MAX)
Optional Features	UV brush (SC15F50U/SC21F50U series) and dust sensor (option)
Accessories Included	Telescopic pipe, crevice tool, dusting brush, upholstery tool
Safety Features	Auto shut-off after 30 min inactivity; UV safety warnings
Maintenance	Clean dust filter with cold water, dry 12h; tap outlet filter; empty bin before full
Spare Parts Availability	Replacement filters from Samsung service centers

Frequently Asked Questions - SC07F50HV SAMSUNG

How do I replace the batteries in the remote handle?

Use 2 AAA size batteries. Open the battery compartment, observe polarity (+/-), and insert. Never recharge or dispose of in fire. If remote still fails, use the body ON/OFF button.

How often should I clean the dust filter?

Clean the dust filter when the filter check indicator turns red or suction noticeably decreases. Wash with cold water and let dry in shade for at least 12 hours before reinserting.

What should I do if the suction power becomes weak?

Check for blockages in the hose, pipe, or nozzle. Clean the dust bin and filters. If the outlet filter is clogged, replace it. Also ensure the dust bin is not full.

Can I use the UV brush on all fabrics?

The UV brush is designed for mattresses, bedclothes, cushions, and similar materials. Do not use on people, pets, or for purposes other than sterilization. Avoid direct exposure to UV rays.

How do I empty the dust bin?

Press the button to release the dust bin. Twist the cover counterclockwise to open. Empty into a plastic bag (recommended for allergy sufferers). Close the cover and reattach until it clicks.

What should I do if the power cord does not rewind fully?

Pull the cord out 2-3 meters and press the cord rewind button. If still not reeling, check for kinks or obstructions. Do not force it.

How do I clean the dust sensor?

Use a dry cloth to gently clean the two sensors in the dust sensor block. Be careful not to damage them. If the sensor still doesn't work, replace the AAA batteries.

Is this vacuum safe for pet hair?

Yes, but hair may tangle around the brush-roller. Regularly clean the brush-roller using the provided crevice tool or scissors. For models with Mini turbo brush, follow the belt replacement instructions if needed.

Can I wash the outlet filter?

No, the outlet filter is non-washable. Tap it gently against a hard surface to remove dust. If suction remains low, replace it with a new filter from Samsung.

How do I replace the belt on the Mini turbo brush?

Remove the bottom plate. Loop the new belt around the pulley shaft, then around the brush-roller. Insert the brush-roller into the slots and reassemble. Ensure the belt is not cracked or broken.

USER MANUAL SC07F50HV SAMSUNG

Vacuum Cleaner user manual

* Before operating this unit, please read the instructions carefully.

* For indoor use only.

English

imagine the possibilities

Thank you for purchasing a Samsung product.

SAFETY INFORMATION

- Before operating the appliance, please read this manual thoroughly and retain it for your reference.

- Because these following operating instructions cover various models, the characteristics of your vacuum cleaner may differ slightly from those described in this manual.

CAUTION/WARNING SYMBOLS USED

WARNING	Indicates that a danger of death or serious injury exists.
CAUTION	Indicates that a risk of personal injury or material damage exists.

OTHER SYMBOLS USED

	Represents something you must NOT do.
	Represents something you must follow.
	Indicates that you must disconnect the power plug from the socket.

This vacuum cleaner is designed for household use only.

Do not use this vacuum cleaner to clean building waste and debris.

Regularly keep the filters in clean conditions to prevent of collecting fine dust in them.

Do not use this vacuum cleaner with any of the filters removed.

Failure to meet these requirements could cause damage to the internal parts and void your warranty.

Notes on the energy label

• Declared energy efficiency and cleaning performance class on carpet or in places where the carpet is used can be met with the enclosed "Eco Carpet" brush.
• When the hard floor has joints and gaps, please use the enclosed "Eco Hard Floor" brush which is designed to meet the energy efficiency and cleaning performance class on hard floor with joints and gaps.
• The values provided on the energy label have been determined according to the prescribed measuring process (in accordance with EN60312 - 1).

Eco Hard Floor

Eco Carpet

IMPORTANT SAFEGUARDS

GENERAL

- Read all instructions carefully. Before switching on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate on the bottom of the cleaner.

- WARNING : Do not use the vacuum cleaner when rug or floor is wet.

- Close supervision is necessary when any appliance is used by or near children. Do not allow the vacuum cleaner to be used as a toy. Do not allow the vacuum cleaner to run unattended at any time. Use the vacuum cleaner only for its intended use as described in these instructions.

- Do not use the vacuum cleaner without a dust bin. Empty the dust bin before it is full in order to maintain the best efficiency.

- Do not use the vacuum cleaner to pick up matches, live ashes or cigarette butts. Keep the vacuum cleaner away from stoves and other heat sources. Heat can deform and discolour the plastic parts of the unit.

- Avoid picking up hard, sharp objects with the vacuum cleaner as they may damage the cleaner parts.

Do not stand on the hose assembly. Do not put weight on the hose.

Do not block the suction or the exhaust port.

- Switch the vacuum cleaner off on the body of the machine before unplugging from the electrical outlet. Disconnect the plug from the electrical outlet before emptying the dust bin. To avoid damage, please remove the plug by grasping the plug itself, not by pulling on the cord.

- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental

capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

• Children should be supervised to ensure that they do not play with the appliance.
• The plug must be removed from the socket outlet before cleaning or maintaining the appliance.
• The use of an extension cord is not recommended.
• If your vacuum cleaner is not operating correctly, switch off the power supply and consult an authorized service agent.
• If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
• Don't carry the vacuum cleaner by holding the hose. Use the handle on the vacuum cleaner set.
• Unplug the cleaner when not in use. Turn off the power switch before unplugging.
• Do not use to suck up water.
• Do not immerse in water for cleaning.
• The hose should be checked regularly and must not be used if damaged.
• The vacuum cleaner handle contains electrical connections the handle is not a serviceable part.
• The current carrying hose handle contains electrical connections is not a serviceable part by user.
• Please contact the manufacturer or service center for a replacement.

UV BRUSH

- Since the UV rays from the UV Brush damage skin and eyes, never allow the rays to make contact with skin or eyes and do not let children or the elderly use the UV Brush. It may damage your eyesight.

• If the transparent window is broken and the UV rays are exposed directly, turn the power off and contact the service center.
• Do not use the UV Brush for purposes other than the sterilization of mattresses, bedclothes, beds, cushions and so on made from material. The company will not be held liable for any loss due to accidents from using the UV Brush for purposes other than its original purpose as listed above.
• Do not sit on the UV Brush or drop it, and avoid imparting impacts on the product. Failing to do so may result in injury or product damage.
• Do not touch the power terminals on the back of the UV Brush with a metal pin or rod. This may result in electric shock or fire.
• When the UV lamp is out of order, never disassemble or modify the product yourself.
  Please contact the manufacturer or service center for a replacement.
• Since an internal discharge occurs within the UV Brush, never use the product near an inflammable spray or substance.
• Take care not to touch the UV lamp window after using the UV Brush for an extended period of time as the surface of the window may be hot.
• The UV Brush may start slowly at a low temperature due to the inherent characteristics of UV lamps. Please keep the UV Brush indoors.

ASSEMBLING THE CLEANER

07

10 Using the UV brush(SC15F50U, SC21F50U Series)

11 Using the Dust Sensor (Option)

FILTER AND TOOL MAINTENANCE

13

13 Using accessory

15 Maintain floor tools

18 Cleaning the Dust Sensor (Option)

19 Emptying the dust bin

20 Cleaning the dust filter

21 Cleaning the dust filter

22 Cleaning the outlet filter

TROUBLESHOOTING

23

assembling the cleaner

- Please do not press the button of dust bin handle when carrying machine.

Illustration of two hands performing a manual task with a device and a magnifying glass (no text or symbols)

- For storage, park the floor nozzle.

Line drawing of a vacuum cleaner with handle and clamped arm (no text or symbols)

operating the cleaner

POWER CORD

Illustration of two different vacuum cleaner setups with attached wires and a recycling symbol (no text or labels)

CAUTION

- When removing the plug from the electrical outlet, grasp the plug, not the cord.

POWER CONTROL

Radio frequency remote-control (SC07F50H, SC15F50H, SC21F50H, SC15F50U, SC21F50U Series)

HOSE (SC07F50H, SC15F50H, SC21F50H Series)

1. ON/OFF [ ⏻ Button

- Press the [ ◎button to operate the vacuum cleaner. Press again to stop the vacuum cleaner.

1. Suction [+], [-] Button

- Press the [+] button to operate the vacuum to high suction power. Press the [-] button to operate the vacuum to low suction power.

If no button is pressed for 30 minutes while cleaning, the safety device is activated and the power is cut off.

In this case, press the [Power] button on the main unit or unplug and then plug the power cord in again.

HOSE (SC15F50U, SC21F50U Series)

1. ON/OFF [ ⏻ Button

- Press the [ ◦button to operate the vacuum cleaner. Press again to stop the vacuum cleaner.

2. [SUCTION (-/+)] Button

- Press the [SUCTION (-/+)] button to increase or decrease the suction power. Each time you press the button, you gradually increase the suction power. After the suction power reaches its maximum, the next time you press the button, you return the suction power to its minimum.

3. [BRUSH ON/OFF] Button

- Press the [BRUSH ON/OFF] button to operate the UV Brush. Press again to stop the UV Brush.

If no button is pressed for 30 minutes while cleaning, the safety device is activated and the power is cut off.

In this case, press the [Power] button on the main unit or unplug and then plug the power cord in again.

Change the battery

• When the vacuum cleaner does not work, replace the batteries. If the problem persists, please contact our authorized dealer.
  • Use 2 batteries of size AAA.

1. Never disassemble or recharge the batteries.
2. Never heat up the batteries or throw them into fire.
3. Do not reverse (+), (-) poles.
4. Dispose of the batteries property.

Illustration of a handheld industrial spray gun with handle and nozzle (no text or symbols)

BATTERY TYPE : AAA Size

BODY

Press the power ON/OFF button repeatedly to start and to stop the vacuum cleaner. (OFF → ON → OFF)

If the remote handle control is not working, the cleaner can be operated using the ON/OFF button on the body of the machine.

1	The ON/OFF button operates the vacuum cleanser or stops it.
2	The filter light is illuminated when the dust pack requires checking or emptying.

operating the cleaner

Body-control type (SC07F50V, SC15F50V, SC21F50V Series)

- HOSE

To reduce suction for leaning draperies, small rugs, and other light fabrics, pull the tap air until the hole is open

Diagram of a curved mechanical component with directional arrows indicating movement (no text or symbols)

- BODY

To control power level, just slide the power control up and down.

MIN = For delicate fabrics, e.g. net curtains.

MAX = For hard floors and heavily soiled carpets.

USING THE UV BRUSH (SC15F50U, SC21F50U SERIES)

1. Insert the brush into the hose handle.

- Insert the UV brush securely into the hose handle until you hear a "clicking" sound.

Illustration of a vacuum cleaner with a handle and lever, showing mechanical components (no text or symbols)

1. Press the [BRUSH ON/OFF] button to start cleaning.

- Press the [BRUSH ON/OFF] button and choose the appropriate suction strength for the cleaner.

- It is advisable to select the (Max) suction strength setting.

• UV sterilization cannot be activated by itself.

1. When you have finished UV cleaning, press the [button.

- Press the [ ◀button to stop the cleaner.

- For safety reasons, UV brushing only runs for 30 minutes and then stops operating. To resume the operation, press the [SUCTION (-/+)] button again.

The UV brush, which is inserted into the hose handle (not directly connected to the telescopic pipe), is dedicated for bedclothes.

Dust Sensor Operations

- Indicates the amount of sucked in dust so that users can experience the successful operation of the product while cleaning the room.

Illustration of a mechanical device with a highlighted section and light rays (no text or symbols)

- Green: When the amount of sucked in dust is small.

- Red: When the amount of sucked in dust is large.

• The dust sensor is automatically turned on when the cleaner runs and turned off when the cleaner is stopped.
• Since the dust sensor runs on battery power, there is no separate switch.

Installing the Batteries

- If the dust sensor doesn't work even after cleaning the sensor, replace the batteries with new ones.

AAA type batteries are required.

• Do not disassemble or recharge the used batteries.
• Do not heat the batteries or put them in a fire.
• Check the polarities (+, -) before inserting the batteries.
• Put the used batteries into the battery recycle bin.
• When you are not using the product for an extended period of time, remove the batteries.

operating the cleaner

Cleaning the dust sensor (Option)

• Since the dust sensor consists of sensitive electronic devices, if water or other liquids enters the sensor, it may cause a problem.
• If you use the dust sensor without closing the battery compartment cover, pollutants such as dust may accumulate in the compartment and cause a problem. Therefore, be sure to use the product with the compartment cover closed.
• Take care when you use the cleaner because the dust sensor may malfunction or may break due to an impact.

Installing the Dust Sensor

- Assemble the dust sensor between the air inlet connector and the extension pipe. (Recommended)

You can assemble the dust sensor between the extension pipe and the hose.

filter and tool maintenance

USING ACCESSORY

Pipe

- Adjust the length of the telescopic pipe by sliding the length control button located in the center of the telescopic pipe back and forth.

Illustration of two cylindrical mechanical components with blue directional arrows indicating motion or force (no text or symbols)

- To check for blockages, separate the telescopic pipe and adjust to shorten. This allows for easier removal of waste clogging the tube.

Illustration of two soldering iron tools with visible soldering and heating elements (no text or symbols)

Accessory (SC07F50H, SC15F50H. SC21F50H, SC15F50V, SC21F50V Series)

- To use the upholstery tool, push the accessory on to the end of the hose handle.

Diagram showing a mechanical assembly with an arrow indicating direction and a close-up of a component (no text or symbols present)

- Pull out the button, to use the dusting brush.

- To use the crevice tool, push the accessory on to the end of the hose handle in the opposite direction.

Illustration of a hand holding a tool with an arrow indicating process (no text or symbols)

filter and tool maintenance

Accessories (SC15F50U, SC21F50U Series)

- Push the accessory onto the end of the hose handle.

Diagram showing a mechanical assembly process with three stages: before, after, and after (no text or symbols present)

- Pull out the dusting brush to use the crevice tool.

- Push the accessory onto the end of the pipe.

Diagram showing a pen being inserted into a frame with arrows indicating direction (no text or symbols)

- Pull out the dusting brush to use the crevice tool.

Accessory (Option)

• Furniture brush for desk, Furniture and Floor.

Illustration of a hand holding a tool above a table, no text or symbols present

14_filter and tool maintenance

2-Step Brush

• Adjust the inlet lever according to the floor surface.
• Remove waste matter completely if the inlet is blocked.

Power Pet Plus Brush (Option)

Frequent vacuuming of hair or pet fur may cause a reduction in rotation due to matters tangled around the brush-roller. In this case, clean the brush-roller with care.

1. Push the Open button of the transparent screen cover to separate the cover.
2. Remove the brushbar from the transparent screen.
3. Remove waste matter such as dust and hair tangled around the brushbar using scissors.
4. Remove dust inside the brush housing using a dry duster or crevice tool.
5. Insert brushbar into rotating belt and assemble.
6. Click the transparent screen cover back into place to reassemble.

Parquet Master Brush (Option)

• Vacuum dust in wide area at once.
- Remove waste matter completely if the inlet is blocked.

Illustration of two different manual cleaning techniques: a brush and a tool, both without any text or symbols.

filter and tool maintenance

Mini turbo brush (Option)

- To replace brush-roller

1. If a clog is present or debris is visible, unscrew the two screws on the back of the Mini turbo brush to remove the faceplate and clear any obstructions.

2. Inspect condition of brush-roller. Replace brush-roller if brushes are worn down. To remove brush-roller, pull up and out of end slots in nozzle housing. Insert ends of brush-roller into same slots to replace.

Inspect belt to ensure that it is in good condition. If belt is broken or cracked, replace belt according to To Replace Belt instructions.

1. Using at MAX. Press the MAX button to operate the vacuum at maximum intake.

Technical line drawing of a mechanical component with mounting holes and internal structure (no text or symbols)

Mechanical assembly diagram showing a motor and housing components (no text or labels)

Diagram of a mechanical device with internal components and a hand holding a tool (no text or symbols visible)

- To replace belt

1. Remove bottom plate. See figure in To Replace brush-roller instructions.

2. Loop one end of new belt around shaft of pulley.

3. Loop other end of belt around designated area for it on brushroll. Insert brush-roller into slots in nozzle housing. See figure in To Replace brush-roller instructions.

4. Fit Mini turbo brush back together as described in To Replace brush-roller instructions.

Technical line drawing showing hands assembling a mechanical component (no text or symbols)

Illustration of a hand using a mechanical device to adjust or install a component (no text or symbols visible)

16_ filter and tool maintenance

To remove dust from the dust bin of the UV brush (SC15F50U, SC21F50U Series)

When you notice that the dust bin is filled, use the [Dust Removal] button to empty the dust bin.

1. To remove dust from the dust bin, move the [Dust Removal] button to the "Open" position.

- While the cleaner is operating (suction), use the [Dust Removal] button for this purpose.

1. When done, move the [Dust Removal] button to the "Close" position.

- When the [Dust Removal] button is in the "Open" position, the suction power of the cleaner is reduced.

Illustration of a hand using a vacuum cleaner to clean or adjust the component (no text or symbols visible)

Illustration of a vacuum cleaner with a hand inserting a component into the air gap (no text or symbols)

Cleaning the UV brush (Cleaning the brush-roller) (SC15F50U, SC21F50U Series)

Human and pet hair often becomes tangled in the brush-roller, causing a reduction in the rotary power of the the brush-roller. To prevent this, clean the brush-roller on a regular basis.

1. Push the [Open Transparent Cover] button inward to remove the cover.

2. Use the crevice tool to remove impurities such as dust and hair from around the brush-roller.

3. When done, push the [Open Transparent Cover] button outward to close the cover.

Diagram showing a car interior with hand positioning and two circular insets highlighting the left side of the door (no text or symbols present)

Illustration of a vacuum cleaner with attached tubing (no text or symbols)

Illustration of a vacuum cleaner with two close-up views showing mechanical components (no text or symbols)

maintain tools and filter

CLEANING THE DUST SENSOR (OPTION)

If the green light is not lit while cleaning

• Check if the hose, extension pipe or the air inlet is clogged and clean it if necessary.
  • Empty the dust bin of the cleaner or clean the filters.

If the red light does not light up when cleaning a dusty location

- Clean the sensors (2EA) in the dust sensor block with a dry cloth.

Illustration of a hand holding a camera lens and a circular device (no text or symbols)

Take care when you clean the sensors in the dust sensor block so that the sensors are not damaged.

1 2 3
Once dust reaches the dust full mark, empty the dust bin.	Take the dust bin out by pushing the button.	Separate the dust bin cover by twisting counter clockwise and pulling the lid.
4 5 6
Throw the dust away in the bin.	Close the dust bin by pushing lid down and twisting clockwise	Before use, push the dust bin into the main body of the vacuum cleaner until you hear the “click” sound.

• Empty into a plastic bag. (recommended for asthma/allergy sufferers)

Line drawing of a hand holding a circular container with contents, no text or symbols present

Illustration of hands holding a container with an arrow indicating rotation (no text or symbols)

Illustration of a hand pouring liquid into a bag with vegetation (no text or symbols)

You may rinse the dust bin with cold water.

filter and tool maintenance

CLEANING THE DUST FILTER

When to clean the dust filter

- The lamp will turn red when suction is reduced. If the light comes on, please clean the dust filter.

Technical line drawing of a mechanical component with two views (front and side), no text or symbols present.

- Turn the vacuum power to 'MAX'.

- If the filter check indicator turns red with the inlet floating 10cm above flat floor, clean the dust pack.

Technical illustration of a mechanical clamp or bracket with a 10cm scale indicator (no text or symbols present)

When suction is noticeably reduced continuously or vacuum cleaner abnormally overheats, please clean the dust pack.

1Take the dust bin out. Pull the dust bin cover to open.		Remove the filter from the dust bin.
Shake the filter over a garbage can to remove loose dust, then wash the filter with cold water.	Let the filter dry in the shade for more than 12 hours.	Put the filter into the dust bin in the correct orientation.
7Close the dust bin cover.To close the dust bin cover,filter should be assembled.		8Before use, push the dust bin into the main body of the vacuum cleaner until you hear the “click” sound.

Make sure the filter is completely dry before putting it back into the vacuum cleaner. Allow 12 hours for it to dry.

filter and tool maintenance

CLEANING THE OUTLET FILTER

12^Remove the fixed frame part at the back of the main body.	Pull out the filter using the tab. Pull out the micro filter
4Clean the filter By tapping the filters against a hard surface (dust bin).	5 Put the filter and frame part into the main body.

• When suction is noticeably reduced continuously or vacuum cleaner abnormally overheats, please clean the outlet filter. Note. Do not wash filter.
  If cleaning does not resolve the problem Please replace blocked out filter.
• Replacement filters are available at your local Samsung distributor.

troubleshooting

PROBLEM SOLUTION
Motor does not start.	Check cable, plug and socket.Leave to cool.
Suction force is gradually decreasing.	Check for blockage and remove.
Low or decreasing suction.	Please check filter and, if required, clean as illustrated in the instructions. if filters are out of condition change them to new ones.
Cord does not rewind fully.	Pull the cord out 2-3 m and push down the cord rewind button.
Vacuum cleaner dows not pick up dirt.	Check hose and replace if required.
Body overheating.	Please check filters, if required clean as illustrated in the instruction.
Static electricity discharge.	Please decrease power suction.This can also occur when air in the room is very dry.Please ventilate the room to air humidity become a normal.

This Vacuum cleaner is approved the following.

Electromagnetic Compatibility Directive : 2004/108/EEC

Low Voltage Directive : 2006/95/EC

[English]

According to Commission Regulation (EU) No 665/2013 and No 666/2013

A	Supplier Samsung Electronics., Co. Ltd
B	Model	SC15F50HT	SC15F50HU	SC15F50UW	SC15F50V3	SC07F50HV SC07F50HX SC07F50V3
C	Energy Efficiency Class E E A
D	Annual Energy Consumption (kWh/yr)	48 52 28
E	Carpet Cleaning Performance Class	C C D
F	Hardfloor Cleaning Performance Class	C C A
G	Dust Re-Emission Class A	A A
H	Sound Power Level (dBA)	80 80 78
I	Rated Input Power (W) 1300 1300 600
J	Type	General purpose vacuum cleaner

1) Indicative annual energy consumption (kWh per year), based on 50 cleaning tasks. Actual annual energy consumption will depend on how the appliance is used.
2) Measurements for power consumption and performance are based on methods in EN 60312 - 1 and EN 60704.

memo

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.

COUNTRY CUSTOMER CARE CENTER WEB SITE
U.K 0330 SAMSUNG (7267864) www.samsung.com
SOUTH AFRICA 0860	7267864 (SAMSUNG) www.samsung.com

DJ68-00699B-08