KA EL 19-11 - Heating KALORIK - Free user manual and instructions

Product Type	Oil-filled radiator
Model	KA EL 19-11
Brand	KALORIK
Power Supply	230V AC, 10A minimum rating
Power Settings	3 positions: I (reduced), II (medium), I+II (full)
Temperature Control	Adjustable thermostat with pilot light
Safety Features	Overheat protection (auto shut-off and thermal fuse)
Assembly Required	Wheels must be fitted before use
Handle	Built-in handle for moving
Cord Storage	Integrated cord storage
Pilot Light	Indicates when heating is active
Oil Type	Special oil (pre-filled, sealed unit)
Cleaning	Wipe with damp lint-free cloth; do not immerse
Maintenance	No user maintenance; repairs by qualified service only
Disposal	Follow regulations for oil disposal; do not dispose as unsorted waste

Frequently Asked Questions - KA EL 19-11 KALORIK

How do I assemble the wheels?

Turn the heater upside down. Position the two wheel bases between the end fins and attach them using the U-hook and wing nuts provided. Fasten the wing nuts securely. The heater must not be used without wheels.

How do I set the thermostat?

Turn the thermostat knob clockwise to increase the temperature and counterclockwise to decrease. The pilot light will turn on when the appliance is heating. When the set temperature is reached, the light will turn off.

What are the power settings?

The power selector has three positions: I for reduced power, II for medium power, and I+II (both buttons) for full power. Set to 0 to turn off.

What should I do if the heater overheats?

If the heater overheats, it will automatically shut off. Unplug the appliance and wait about 10 minutes for it to cool. Then switch it back on. If the problem persists, contact customer service. If the thermal fuse blows, it must be replaced by a qualified service.

Can I use the heater near water?

No. Do not operate the heater near baths, showers, washbasins, swimming pools, or any water container. The controls must not be reachable when in contact with water.

How do I clean the radiator?

Ensure the appliance is unplugged and completely cool. Wipe the housing with a slightly damp, lint-free cloth. Do not immerse in water or any liquid.

What if the power cord is damaged?

If the cord is damaged, it must be replaced by a competent qualified electrician to avoid danger. Do not use the appliance until repaired.

Why does the heater smell when first used?

A slight smell may be emitted when the appliance is switched on for the first time. This is normal. Ensure sufficient ventilation during initial use.

Can I cover the heater?

No. Do not cover the heater to avoid any risk of fire. Ensure air inlet and outlet openings are not blocked, and keep inflammable materials like curtains away.

How should I dispose of the heater?

Do not dispose of it as unsorted municipal waste. Follow local regulations for oil-containing devices. Bring it to a municipal collection point for reuse, recycling, or proper disposal.

USER MANUAL KA EL 19-11 KALORIK

1. Handle
2. Pilot light
3. Thermostat
4. Power selector
5. Cord storage
6. Wheels

P

Please read these instructions carefully before using the appliance.

Important: People (including children) who are not able to use the appliance in a safe way, due to their physical, sensorial or mental capacity or their lack of experience or knowledge, must never use the appliance except if they are supervised by a person responsible for their safety or if they previously received instructions concerning the safe use of the appliance.

Close supervision is necessary to prevent children from using the appliance as a toy.

☐ Check that your mains voltage corresponds to that stated on the appliance.
☐ Never leave the appliance unsupervised when in use.
From time to time check the appliance for damages. If it is damaged, do not use it but have it repaired by a competent qualified electrician (*). Should the cord be damaged, it must be replaced by a competent qualified electrician(*).
☐ Only use the appliance for domestic purposes and in the way indicated in these instructions.
☐ Never immerse the appliance in water or any other liquid for any reason whatsoever. When cleaning the appliance, refer to the instructions in the "Cleaning and care" section.
□ Never use the appliance near hot surfaces.
□ Unplug the appliance before cleaning it.
☐ Never use the appliance outside and always place it in a dry environment.
☐ Never use accessories that are not recommended by the producer. They could constitute a danger to the user and risk to damage the appliance.
☐ Do not place the appliance under a power socket. The power socket must not be in the hot airflow of the appliance in order to avoid overheating.
☐ Never move the appliance by pulling the cord. Make sure the cord cannot get caught in any way. Do not wind the cord around the appliance and do not bend it.
□ Always position the radiator in such a way that inflammable materials (such as curtains) cannot be ignited. Ensure at all times that the unit is placed solidly on its wheels.
Make sure that the air inlet and outlet openings are not blocked. To avoid any risk of fire, do not cover the heater (ex. With clothes)
☐ Warning: Do not operate the heater near baths, showers, washbasins, swimming pools or any other water container. It must be impossible to reach the commands of your appliance when you are in contact with water.
☐ The temperature of the appliance may be very high when the appliance is in use. Avoid contact with the skin.
☐ Make sure the cord does not come into contact with the hot parts of the appliance.
☐ Never use the appliance near inflammable or explosive materials.
☐ Do not cover the appliance in order to avoid any risk of fire.
☐ Hazards may occur, for instance when touching the radiator or knocking it over, or as a result of inappropriate positioning. No responsibility is accepted if damage results from improper use, or if these instructions are not complied with.
□ Always switch off and remove the plug from the wall socket after use, and also in case of any malfunction and before cleaning. Do not attempt to remove the plug from the wall socket with wet hands.
☐ This radiator is filled with a precise quantity of special oil. Any repairs requiring the opening of the oil container are to be made by the manufacturer or its authorized service agent. They also should be contacted if oil leaking.

☐ When scrapping the appliance, all regulations concerning the disposal of oil should be followed.

1) Competent qualified electrician: after sales department of the producer or importer or any person who is qualified, approved and competent to perform this kind of repairs in order to avoid all danger. In any case you should return the appliance to this electrician.

CONNECTION TO THE MAINS SUPPLY

The radiator should only be connected to an earthed socket installed in accordance with the regulations.

Make sure that the supply voltage corresponds with the voltage marked on the rating label (230V (AC)) and the rated electric current is not lower than 10A.

This product complies with all binding CE- labelling directives.

ASSEMBLY

Before using the radiator for the first time, the wheels must be fitted to the unit and then secured with the wing nuts provided.

• Turn the heater upside down.
• Position the two wheels base between the end fins.
• Attach them to the heater using the U-hook and wing nuts.
• Fasten the wing nuts.
• Turn the heater the right way around.

THE HEATER MUST NOT BE USED WITHOUT ITS WHEELS.

When the appliance is switched on for the first time, a slight smell may be emitted. Please ensure sufficient ventilation.

OPERATION

1. Select the power by pressing the buttons of the power selector. It has 3 different positions:

I = reduced power II = medium power . | + | = full power ) 0 = OFF

1. Turn the thermostat clockwise to increase the temperature and anticlockwise to reduce it. The pilot light will turn on indicating that the appliance is heating. During use, the pilot light will come on and off. It will turn off as soon as the set temperature is reached.

2. If you want to switch off your appliance, turn off the two switches (thermostat knob to "MIN" position and power selector to "0"), remove the plug from the power supply and place it in its storage location. CAUTION: YOUR APPLIANCE WILL REMAIN HOT FOR A FEW MINUTES.

3. To move your appliance, take it by its handle, raise it and roll it.

4 KA EL 19-7/9/11 - 070521

OVERHEAT PROTECTION

Your appliance is fitted with two safety devices: the first one switches off the appliance automatically in case of overheat. In this case, unplug the appliance, wait about 10 minutes for it to cool. Then switch it back on as described above. The appliance should operate normally. Should the problem persist, please contact the nearest customer service. The second safety device disconnects the appliance in case of overheating by means of a thermo fuse. When serious overheat occurs, the overheat fuse will automatically break and cut the power, which can prevent the devices from damage and avoid fires. If this overheat fuse breaks, it should be replaced by a competent qualified service.

GENERAL CLEANING AND CARE

• Before cleaning the appliance, ensure it is disconnected from the power supply and has cooled down completely.
• Do not clean the radiator with water and do not immerse it.
  • The housing may be wiped with a slightly damp, lint-fee cloth.

PROTECTION OF THE ENVIRONMENT- DIRECTIVE 2002/96/EC

In order to preserve our environment and protect human health, the waste electrical and electronic equipment should be disposed of in accordance with specific rules with the

implication of both suppliers and users. For this reason, as indicated by the symbol on the rating label or on the packaging, your appliance should not be disposed of as unsorted municipal waste. The user has the right to bring it to a municipal collection point performing waste recovery by means of reuse, recycling or use for other applications in accordance with the directive.

MODO DE EMPREGO

PARA A SUA SEGURANÇA

NUNCA DEVE UTILIZAR O SEU RADIADOR SE AS RODINHAS NÃO ESTIVEREM PREVIAMENTE JUNTADAS.