50PL9126D - Video projector PHILIPS - Free user manual and instructions
Find the device manual for free 50PL9126D PHILIPS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Video Projector |
| Brand | Philips |
| Model | 50PL9126D |
| Display Technology | LCD |
| Resolution | 1024 x 768 (XGA) |
| Brightness | 3000 ANSI Lumens |
| Contrast Ratio | 2000:1 |
| Lamp Life | 4000 hours (Normal), 6000 hours (Eco) |
| Lamp Type | UHP (Ultra High Performance) |
| Dimensions (W x H x D) | 300 x 120 x 250 mm |
| Weight | 3.5 kg |
| Power Consumption | 250 W (Normal), 200 W (Standby) |
| Power Supply | AC 100-240V, 50/60 Hz |
| Input Ports | HDMI, VGA, S-Video, Composite Video, Audio 3.5mm |
| Output Ports | VGA (Monitor out), Audio 3.5mm |
| Projection Modes | Front, Rear, Ceiling Front, Ceiling Rear |
| Keystone Correction | Vertical ±30 degrees |
| Noise Level | 33 dB (Normal), 28 dB (Eco) |
| Built-in Speaker | 1 x 8W |
Frequently Asked Questions - 50PL9126D PHILIPS
How do I replace the projection lamp?
Turn off the projector and unplug it. Allow the lamp to cool for at least 30 minutes. Remove the lamp cover screw, open the cover, then remove the old lamp module by loosening the securing screws. Insert the new lamp module, tighten screws, close the cover, and screw the cover screw back. Reset the lamp timer via the menu (Settings > Lamp > Reset Timer).
What is the recommended cleaning method for the lens?
Use a soft, dry microfiche cloth or lens cleaning tissue. Apply a small amount of camera lens cleaner if necessary, but avoid excessive liquid. Gently wipe the lens surface in a circular motion. Do not use paper towels or harsh chemicals.
The projector shows a 'Temperature' or 'Fan' error. What should I do?
This indicates overheating. Ensure the projector is placed in a well-ventilated area with at least 20 cm clearance around vents. Clean the air filters according to the manual (typically every 100 hours). If the problem persists, contact Philips support.
How can I connect my laptop to the projector?
Use a VGA or HDMI cable. Connect one end to your laptop's output and the other to the projector's corresponding input. Press the Source button on the remote or projector to select the correct input. If using VGA, also connect the audio cable (3.5mm) for sound.
Why is the image fuzzy or out of focus?
Adjust the focus ring on the lens until the image is sharp. If using keystone correction, excessive correction can reduce sharpness; reposition the projector to minimize keystone. Also check that the projector is the correct distance from the screen.
What is the lamp replacement part number for this projector?
The lamp module part number is Philips LMP-211 or equivalent (check your manual). It is a UHP 250W lamp. Always purchase from authorized dealers to avoid damage.
Can I use the projector in a room with ambient light?
Yes, but for best results, dim the room lights. The projector has 3000 lumens brightness, which works well in moderately lit rooms. Close curtains and avoid direct light on the screen.
How do I reset the lamp counter?
After replacing the lamp, press the Menu button on the remote. Navigate to Settings or Setup, find Lamp or Lamp Hours, select Reset Lamp Timer. Confirm by pressing Enter. This clears the timer for the new lamp.
The projector turns off automatically. Why?
Common causes: lamp overheating, blocked vents, or a faulty lamp. Check if the Temperature or Fan indicator is lit. Allow the projector to cool, clean filters, and ensure adequate ventilation. If issue persists, replace the lamp or contact support.
Is there a wireless connection option?
The 50PL9126D does not have built-in wireless. You can use an external wireless HDMI adapter or a wireless presentation system plugged into the HDMI port. Purchase a compatible device from Philips or third-party brands.
User questions about 50PL9126D PHILIPS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Video projector in PDF format for free! Find your manual 50PL9126D - PHILIPS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 50PL9126D by PHILIPS.