CNDV-70T - Car navigation system PIONEER - Free user manual and instructions

USER MANUAL CNDV-70T PIONEER

Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: (0) 3/570.05.11 <KKYHX> <07E00000> Published by Pioneer Corporation Copyright © 2007 by Pioneer Corporation. All rights reserved Printed in Belgium

Instructions for Upgrading The screen shown in the example may differ from the actual screen. The actual screen may be changed without notice for performance and function improvements. [À CAUTION | + Read the entire manual before upgrading the programme of your navigation system. Be sure to read the following descriptions + Display Compatibility This provides information about compatible displays for the system Before Upgrading the Software Pro- gramme This provides important information about the possibility of loss of customised data. Licence Agreement This provides à licence agreement of this soft- ware. Be sure to read this before using the software. About the Database This provides the date when the Map Data base was recorded Copyright This provides the copyright of the Map Data- base. Other Precautions This provides important précautions about using this software: Manual Overview This provides information about how to use each manual to find more detailed informa- tion. Models to be Upgraded These discs can upgrade the programme for the following models AVIC-800DVD, AVIC-8DVDIr, AVIC-8DVD, AVIC- 900DVD, AVIC-9DVDu, AVIC-9DVD

14e Display Compatibility You need an A/ Receiver or Display with touch panel capability to use this software. Make sure to use à display suitable for this sys- tem. lf a display that does not have a touch panel feature is connected, the software will not func- tion properly. (The display for remote control operation can not be used.) For details, consult your dealer or refer to the product catalog Group 1 - A/V Receiver The following AV Receivers can be connected to the navigation system

AVH-P7500DVDI, AVH-P5700DVD, AVH

P6600DVD, AVH-P6800DVD, AVHP6500DVD, and AVH-P7500DVD The following A/V Receiver cannot be connected to the navigation system AVH-P5900DVD Group 2 - Display Type AVD The following display can be connected to the navigation system: AVD-W6210 Group 3 - AV system display The type of the unit that has no amplifier and can- not be a control master because other unit can- not be connected to it The following display can be connected to the navigation system: AVX-7600 O1 For details of operation when connecting to the AN Receiver or Display, refer to “Appen- dix’ on “Operation Manual for CNDV-50MT" and the descriptions related to the navigation system on each AM Receiver or Display's manual

MAN-CNDV-7OT-EN.fim Page 3 Monday, June 4, 2007 1:55 PM Before Upgrading the Software Programme Possible risk when upgrading There is a possible risk that the stored user-regis- tered data may be lost upon completion of the update. Please be aware that the manufacturer cannot take any responsibility for lost data in the event that data is lost. When the update procedure is complete, the navigation system will be restarted. After the system has started up again, do NOT to turn off the power supply for the navigation system until the map of your surroundings appears Anyexisting calculated routes will be erased. The data for “Address Book” (including “Return Home” and “Go to" data), ‘Areas to Avoid”, and learned data of the sensor will remain. Cus- tomised settings other than above return to the default If you use the remote control type, all the data will be erased and customised settings will return to the default. Backing up Address book ent Gincluding “Return Home” and “Go to data) There is the possible risk of the “Address Book” data (including “Return Home” and “Go to data) and the “Destination History" data being lost during the update process. Itis highly recommended to use a PC Card (PCMCIA TYPE II <5 V>) to back up the data Since the “Destination History” cannot be stored on à PC Card directly, to store the “Destination History" data, first register it as an entry of “Address Book" and then copy it onto the PC Card. (For detailed information about storing the data to PC Card, refer to the manual included in the hardware package when you purchased the navigation system or previous upgrade package.)

Pioneer grants to you a non-transferable, nonexclusive licence to use the software installed on the Pianeer products (the "Soft: ware”) and the related documentation solelÿ for your own per: sonal use or for internal use by your business, only on Such Pioneer products. You shall not copy, reverse engineer, translate, port, modify or make derivative works of the Software, You shall not loan, rent. disclose, publish, sell, assign, lease, sublicence, market or other wise transfer the Software or use it in any manner not expressly authorised by this agreement. You shall not derive or attempt to derive the source code or structure of al or any portion of the Sott ware by reverse engineering, disassembly, decompilation, or 1 other means, You shall not use the Software to perate a servic bureau or for any other use invohing the processing of data for other persons or entities. Pioneer and its licensor(s) shal retain all copyright, trade secret, patent and other proprietary ownership rights in the Software. The Software is copyrighted and may not be copied, even if modified or merged with other products, You shall not aller or remove any Copyright notice or proprietary legend contained in or on the Soft: ware. You may transfer all of your licence rights in the Software, the related documentation and a copy of this Licence Agreement to another part, provided that the party reads and agrees to accept the terms and conditions of this Licence Agreement.

2. DISCLAIMER OF WARRANTY

‘The Software and related documentation are provided to you "AS IS". PIONEER AND ITS LICENSOR(S) (for the purpose of provi ions 2 and 3, Pioneer and its licensor(s) shall be collectively referred to as ‘Pioneer') MAKES AND YOU RECEIVE NO WAR- RANTY, WHETHER EXPRESS OR IMPLIED, AND ALL WARRAN: TES OF MERCHANTABILITY AND FITNESS FOR ANY

PARTICULAR PURPOSE ARE EXPRESSLY EXCLUDED. SOME

COUNTRIES DO NOT ALLOW EXCLUSION OF IMPLIED WARRAN TES, SO THE ABOVE EXCLUSION MAY NOT APPLY TO YOU ‘The Software is complex and may contain some non-conformities, defects or errers. Pioneer does not warrant that the Software will meet your needs or expectations, that operation of the Software will be error free or uninterrupted, or that all non-conformities can or will be corrected. Furthermre, Pioneer does not make any rep- resentations or warranties regarding the use or results of the use of he Soflware in terms of its accuracy, rellability or otherwise.

MAN-CNDV-7OT-EN.fin Page 4 Monday, June 4, 2007 1:55 PM

3. LIMITATION OF LIABILITY

IN NO EVENT SHALL PIONEER BE LIABLE FOR ANY DAMAGES, CLAIM OR LOSS INCURRED BY YOU (INCLUDING, WITHOUT

LIMITATION, COMPENSATORY, INCIDENTAL, INDIRECT, SPE

CIAL, CONSEQUENTIAL, OR EXEMPLARY DAMAGES, LOST

PROFITS, LOST SALES OR BUSINESS, EXPENDITURES, INVEST- MENTS, OR COMMITMENTS IN CONNECTION WITH ANY BUSH NESS, LOSS OF ANY GOODWILL, OR DAMAGES) RESULTING FROM THE USE OF OR INABILITY TO USE THE SOFTWARE, EVEN IF PIONEER HAS BEEN INFORMED OF, KNEW OF, OR SHOULD HAVE KNOWN OF THE LIKELIHOOD OF SUCH DAMAGES, THIS LIMITATION APPLIES TO ALL CAUSES OF ACTION IN THE.

AGGREGATE, INCLUDING WITHOUT LIMITATION BREACH OF

CONTRACT, BREACH OF WARRANTY, NEGLIGENCE, STRICT LIA- BILIY, MISREPRESENTATION, AND OTHER TORTS. IF PIO: NEER'S WARRANTY DISCLAIMER OR LIMITATION OF LIABILITY SET FORTH IN THIS AGREEMENT SHALL OR FOR ANY REASON WHATSOEVER BE HELD UNENFORCEABLE OR INAPPLICABLE, YOU AGREE THAT PIONEER'S LIABILITY SHALL NOT EXCEED FIFTY PERCENT (60%) OF THE PRICE PAID BY YOU FOR THE. ENCLOSED PIONEER PRODUCT. Some countries do not allow the exclusion or limitation of inciden- tal or consequential damages, so the above limitation or exclusion may not apply to you. This warranty disclaimer and limitation of liabiity shall not be applicable to the extent that any provision of this warranty is prohibited by any country or local law which can: not be preempted

4. EXPORT LAW ASSURANCES

You agree and certify that either the Software nor any other tech: nical data received from Pioneer, nor the direct product thereot. will be exported outside the country or district (ihe “Cauntry"} gov erned by the government having jurisdiction over you (te “Gov- ernment) except as authorised and as permitted by the laws and regulations of the Government, Ifthe Software has been rightfully cblained by you outside of the Country, you agree that you wil not re-export the Software nor any other technical data received from Pioneer, nor the direct praduct thereof, except as permitted by the laws and regulations of the Government and the laws and requla tions of the jurisdiction in which you obtained the Software.

“This Agreement is effective until terminated. You may terminate it at any time by destroying the Software, The Agreement also will terminate if you do not comply with any terms or conditions of this. Agreement. Upon such termination, you agree to destroy the Soft ware.

“This is the entire Agreement between Pioneer and you regarding its subject matter. No change in this Agreement shall be effective unless agreed to in writing by Pioneer. any provision of this Agreement is declared invalid or unenforceable, the remaining provisions of this Agreement shall remain in full force and effect.

Tele Atlas End User Licensing Terms THIS IS A LEGAL AGREEMENT (THE "AGREEMENT") BETWEEN YOU, THE END USER, AND PIONEER and is licensors of Data product (sometimes collectivel} “Licensors”). BY USING YOUR COPY OF THE LICENCED DATA, YOU AGREE TO THE TERMS AND CONDITIONS OF THIS AGREEMENT.

1. Grant of Licence.

Licensors grant you a nontransferable, nonexclusie licence to use the map data and business points of interest information (the POIs") (logether, the *Datar) contained on these discs, solely for personal, non-commercial use and not to operate a service bureau or for any other use invohing the processing of data of other persons or entities. You may make one (1) copy of the Data for archival or backup purposes only but you may not otherwise Copy, reproduce, modify, make derivative works, derie the truc ture of or reverse engineer the Data, The Data is restricted for use with the PIONEER Product(s) The Data contains confidential and roprietary Information and materials, and may contain trade Secrets, so you agree to hold the Data in confidence and in trust and not to disclose he Data or any portions in any form, including by renting, leasing. publishing, leasing, sublicensing or transter- ring the Data Lo any third par. You are expliciy prohibited from downloading the digital maps and programmes contained in the Data or tram transferring nese to another data carrier or compur ter. You are prohibited from using the POIS (h to create mailing lists or (i for other such similar uses.

‘The Data is copyrighted by the Licensors and the Licensors retain all ounership rights in the Data. You agree not to alter, remove, blierate, or abscure any copyright notice or proprietary legend contained in er on the Data. The current copyrights are as follows: Data Source © 2007 Tele Atlas © BEV. 67 1968/2003 ©DAV © IGN France Michelin data © Michelin 2007 © Ordnance Survey of Northern Ireland © Norwegian Mapping Authority, Public Roads Administration / © Mapsolutions: © Swisstopo Topografische ondergrond Copyright © dienst voor het kadaster en de openbare registers, Apeldoorn

“This data has been approved by Turkish Military Forces by the given authority from Councils of Ministers of Turkey” © Roskartographia ‘This product includes mapping data licenced from Ordnance Sur: vey with the permission of the Controller of Her Majesty Station: ery Office. © Crown copyright and/or database right 2007. All rights reserved. Licence number 1000268920.

3. Warranty Disclaimer.

THE DATA IS PROVIDED ON AN "AS IS" AND “WITH ALL FAULTS BASIS" AND PIONEER, ITS LICENSORS, AND [TS LICENCED DIS-

MAN-CNDV-7OT-EN.fim Page 5 Monday, June 4, 2007 1:55 PM ESSENTIAL CONDITION OF THIS AGREEMENT AND YOU ACCEPT THE DATA ON THIS BASIS.

4. Limitation of Liability.

‘This Agreement will terminale immediately and automatically without notice, i you breach any term of this Agreement. You agree that in the event of termination of the Agreement, you shall return the Data (including all documentation and all copies) to PIONEER and its suppliers

You agree to indemnify, defend and hoïd PIONEER, its Licensors and its suppliers (including their respective licensors, suppliers, assignees, subsidiares, affliated companies, and the respective oflicers, directors, employees, shareholders, agents and repre- sentatives) free and harmiess from and against any llability, loss, injury (including injuries resulting in death), demand, action, cost expense, or claim of any kind or character, including but not lim ited to attomneys fees, arising out of or in connection with any use er possession by you of the Data

7. Additional Provisions with respect to

the Great Britain Data and Northern lre- land data only.

8. You are prohibited from removing or obscuring of any copy-

right, trademark or restrictive legend belonging to Ordnance Survey. ‘The Data may include the data of licensors, including Orcr nance Survey. Such Data is provided on an ‘AS 1S° AND “WITH ALL FAULTS BASIS" and the licensars EXPRESSLY DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NONIN FRINGE-MENT, MERCHANTABILITY, QUALITY, EFFECTIVE:

NESS, COMPLETENESS, ACCURACY, TITLE AND FITNESS

You are prohibited from using the Data in any printed, pub- lished form that results in derivative products to be distributed freely or sold to the public without the prior permission of Ord: nance Survey. e. You shall indemnify and hold harmiess Ordnance Survey from and against any claim, demand or action, irrespective of the nature of the claim, demand or action alleging loss, costs, damages, expenses, or injury (including injury from death) resulting from your authorised or unauthorised use, posses- Sion, modification, or alteration of the Data. End User accents the obligation Lo, on request, provide Orc nance Survey with information on what products and/or serv ices containing and/ or derived from the Licenced Products: they produce. You are liable to Ordnance Survey in the event of discovery of breach of the aforementioned contractual terms,

8. Additional Provisions with respect to

the Denmark Data only. You shall be prohibited from using the Data to create maps within telephone books, telephone books or other products similar to tet ephone books (e.g. directories), including such products in digital form

9. Additional Provisions with respect to

the Norway Data only. You shall be prohibited from using the Data to create general pur pose printed or digital maps, which are similar La tne basic national products of the Norwegian Mapping Authority. (Any derivative product of the Data of Norway shall be regarded as sim. ilar to the basic national products of the Norwegian Mapping Authority i such derivative product has a regional or national cov- erage, and at {he same time has a content, scale and format that are similar to the basic national products of the Norwegian Map: ping Authority)

10. Additional Provisions with respect

to the Poland Data only. You shall be prohibited from using the Data to create printed maps.

‘his is the exclusive and complete Agreement between the Licerr sors and you regarding is subject matter, Nothing in this Agree- ment shall creale a joint venture, partnership or principal-agent relationship between the Licensors and you. The internal laws of Sections 2-4 and 6 11 shall survie the expiration or termination of this Agreement This Agreement may be amended, altered, or modified oniy by PIONEER. You may not assign any part of his Agreement without PIONEER’ prior written consent, You acknowledge and under Stand that the Data may be subject to restrictions on exportation and agree to comply with any applicable export laws. In the event that any provision or part of à provision of this Agreement is deter- mined to be invali, legal, or unenforceable, such provision or part thereof shall be stricken from this Agreement and the remainder of this Agreement shall be valid legal, and enforceable tothe maximum extent possible. Any notice under this Agreement shall be delvered by courier to PIONEER, Attention Legal Depart ment.

Copyright Data for the Map Database This database was developed and recorded up to April 2006. Changes to streets/roads made after that time may not be reflected in this database. Itis strictly prohibited to reproduce and use any part or the whole of this map in any form without permission from the copyright owner. Ifthe local traffic regulations or conditions deviate from this data, follow the local traffic regulations (such as signs, indications, etc.) and conditions (such as construction, weather, etc.) The traffic regulation data used in the map database applies only to standard sized pas- senger vehicles. Note that regulations for larger vehicles, motorbikes, and other non standard vehicles are not included in the data- base.

Data Source © 2007 Tele Atlas © BEV. GZ 1368/2003 © DAV © IGN France Michelin data © Michelin 2007 © Ordnance Survey of Northern Ireland © Norwegian Mapping Authority, Public Roads Administration / © Mapsolutions © Swisstopo Topografische ondergrond Copyright © dienst voor het kadaster en de openbare registers, Apel doom 2007 “This data has been approved by Turkish Military Forces by the given authority from Councils of Ministers of Turkey” © Roskartographia This product includes mapping data licenced from Ordnance Survey with the permission of the Controller of Her Majesty's Stationery Office © Crown copyright and/or database right 2007. All rights reserved. Licence number 100026920

© 2007 INCREMENT P CORP. ALL RIGHTS

RESERVED Other Precautions In case of trouble Should the navigation system fail to operate prop- erly, contact your dealer or nearest authorised Pioneer Service Station Visit our website Visit us at the following site www.pioneer.co.uk + Register your product. We will keep the details of your purchase on file to help you refer to this information in the event of an insurance claim such as loss or theft.

Manual Overview P7 MAN-CNDV-TOT-EN.fim Page 7 Monday, June 4, 2007 1:55 PM < This manual is à supplementary document that summarises the points that will be renewed after upgrading your navigation system by using CNDV-T0T. For more details about each operation, please get the manual with the following directions depending on the previous DVD Map disc you used Notes: + “Operation Manual for CNDV-50MT" mentioned below is the manual has the following description on its front cover. “This operation manual can be used with the following models: AVIC-800DVD, AVIC- 8DVDu, AVIC-8DVD, AVIC-900DVD, AVIC-9DVDu, AVIC-9DVD” + “Customised settings’ mentioned below means all settings except for the data for "Address Book” including “Return Home” and “Go to” data), “Areas to Avoid”, and learned data of the sensor. DVD Map Disc you used How to get more details Customised The DVD-ROM supplied By upgrading the navigation system with this disc, the operations by Cleared with AVIC-8DVD, AVIC- remote control change to operations with the touch panel and many 9DVD (Blue label) or other changes will take place including changes to the menu config- CNDV-20 uration. For the operations after the upgrade, obtain the Operation Manual for CNDV-50MT and use it as your primary reference. CNDV-30 (with remote Byupgrading (he navigation system with {his disc, the operations by Cleared control type) remote control change to operations with the touch panel and many other changes will take place including changes to the menu config- uration. For the operations after the upgrade, obtain the Operation Manual for CNDV-50MT and use it as your primary reference. CNDV-30 (with touch The operations olher Ihan those described in {his manual are essen-_ Cleared panel type) tially the same as before. However, there are slight changes on some functions. For detailed operations, obtain the Operation Manual for CNDV-50MT and read it CNDV-40MT The operations olher Than those described in {his manual are essen- Retained tially the same as before. However, there are slight changes on some functions. For detailed operations, obtain the Operation Manual for CNOV-50MT and read it CNDV-40R The operations by remote controï change lo operations wiln 1e Retained touch panel. However, the menu configurations are almost the same as before. For detailed operations, obtain the Operation Manual for CNOV-50MT and read it CNDV-S0MT The operations olher than Ihose described in {his manual are almost Retained the same as before.

Obtain the manual by downloading it via Web Visit “http://www.pioneer.eu/eur/content/support/support.html”. D = Click “On-line Manuals”. Enter “CNDV-50MT" and click “search”.

Related models and several language versions will be shown Click the model number that is your desired language version: DVD MAP for AVIC-800DVD, AVIC-8DVDun, AVIC-8DVD, AVIC-900DVD, AVIC-9DVDn, AVIC-9DVD" in “Description.

Q Please click the model number that is mentioned a:

Download the manual if desired. If you cannot get the manual via Web Obtain the manual by — sending an E-mail to: info@pioneereur.com — writing a letter to: Pioneer Europe NV, European Service Division Haven 1087 Keetberglaan 1 9120 MELSELE BELGIUM

Renewed Points through this Upgrade If you upgrade your navigation system by this disc, the system will have the following change: Renewal Map database The Map database will be changed: Wide variety of facility informa- tion for POI search You can search your destination from all areas. Approximately 1.5 million POIS are included in the database. D The categories that you can use for voice rec- ognition also will be changed. To know the categories that you can vocalize, see the dis- played voice help 1 Some facilities icons used in POI Search Vicinity Search, and Overlay POI will be changed! Easy operation for expanded coverage (Country selection table) The screen to select a country you want to search during a search step (‘Country selection table”) will be changed to à table format to comply with expanded coverage area. Select a country you want to search from the table: Selected country Country codes

Double Disc This package is adopted “Double disc” system so as to contain larger database and expanded cov erage area: one for the west and the other for the east. However, the map data over 200m scale is con- tained both disc and there is à large overlapping area (Germany and part of Austria) so that you can get comfortable operation at the long-dis- tance navigation Configuration of data stored on discs The database and lower scale maps stored on each disc are as follows West area disc East area disc

In case of the cross disc routing Only when setting your destination for the another disc, it is necessary to replace from the current disc to another disc. In case ofthe cross disc routing, the following procedure is recommended

Insert the disc contai you want to set. ing the destination Search for the destination and set as your destination. After route calculation finished, remove the current disc. Insert the disc contai location. ing your current [1 The navigation system reboot automati cally with keeping your destination and route set. Drive toward your destination. [1 When you approach the areas not stored on the disc, the navigation system notify you of approaching that area. Replace the disc at that time Removing the disc and inserting another disc causes the navigation system to automatically restart and reload the new route. (This auto- matic “Reroute” operation cannot be can- celled.)

Limitation of Functions for Areas not Stored on the Disc For areas not stored on the disc, the functions will operate as follows: Displaying the map Maps with a scale of between 25 m and 200 m cannot be displayed. (If the scale was set to between 25 m and 200 m. it is automatically switched to 500 m.) When driving with Mixed Mode, St.List Mode or Drivers View, upon entering an area not stored on the disc the display auto matically switches to Map Mode. (When the vehicle reenters an area stored on the disc, the display returns to the previous map mode except for Drivers View.) Destination search You cannot search a destination in an area not stored on the disc using Address Search POI Search, Vicinity Search or Postal Code Search (including operation by voice recognition) If you cannot search in a currently selected country, the system may forcibly switch to the country selection screen. A Motorway Search covers all areas, regard less ofthe disc on which the information is storedi If a Vicinity Search is performed on the bor der of an area not stored on the disc, the sys- tem will not necessarily select the nearest facility. (The search will take place only within the range of areas stored on the disc.) Guidance When your vehicle approaches an area not stored on the disc, you will be notified three times: when the distance to the area not stored on the disc is 20 km (12 mi), 10 km (6 mi) and 5 km (8 mi) respectively. When your vehicle enters that area, a caution is given In the areas not stored on the disc, only guid- ance for reaching the destination is provided No other guidance is given If a route calculation is operated within an areas not stored on the disc, the route might not be set from the streets you are currently driving. Also, if you set the destination in an

æ& & MAN-CNDV-7OT-EN.fim Page 11 Monday, June 4, 2007 1:55 PM & | FA area not stored on the disc of the disc, the sys: tem may not be able to set the route up to the destination Ithe vehicle deviates from the set route in an area not stored on the disc, the Auto Reroute function will not work. Even if "Close-up of Junction” is ‘On', the display will not switch to an enlarged map of the junction: Even if you drive on the motonway, lane infor- mation, motonway exit numbers and motorway signs will not be displayed Route information Ifthe set route goes through an area not stored on the disc, no route profile for that area will be displayed. (If the set route traverses both an area not stored on the disc and area stored on the disc, only the route profile within the area stored on the disc will be displayed.) Route scrolling for an area not stored on the disc is possible only with à map scale of 500 m or above. Other function limitations Avoid area + An area not stored on the disc cannot be set as 7 an Areas to Avoid. [ A set Areas to Avoid may be deleted when the software is updated. If this happens, the system will automatically try to recover the deleted information, but data can be recov- ered only for areas stored on the disc. For items that could not be recovered, a recovery process will begin when you set another disc. Ds + mL

P7 MAN-CNDV-7OT-EN.fm Page 12 Monday, June 4, 2007 1:55 PM

Messages and How to React to Them (Additional Messages) The following messages are added to those of CNDV-50MT: When Vicinity Search cannot be per formed because the searched loca: tion is in areas not stored on the DVD Map Disc. Message This area does not contain any POl'S ofthe selected type. What to do form the Vicinity Search again. When areas not stored on the DVD Map Disc are included in the search This country is not available on the disc. Please insert an appropriate disc. Setthe destination or way points in the areas stored on the DVD Map Disc, or replace the DVD Map Disc and perform the search again. Farled io make 1e route proie. Failed io generate Ie route profile because the set route passes through areas not stored on the DVD Mep Di Mnsertthe DVD Map Disc and retry. Tn case the current position is areas not stored on DVD Map Disc and an attempt was made to zoom in to make the scale 500m or more. No map data available on this scale. Scaling up. Zoom in again after the vehicle moves into an area stored on the DVD Map Disc Or, replace the DVD Map Disc and try to 2o0m in again: Tn case the current position Is are: not stored on the DVD Map Disc and an attempt was made to zoom in to make the scale 500 m or more. This function is not available win the current map disc. Zoom in again after the vehicle moves into an area stored on the DVD Map Disc Or, replace the DVD Map Disc and try to zoom in a

How to Upgrade Your Naviga- tion The programme is installed to the navigation sys- tem using the application disc When installing the programme, you carry out the following operations. When all the setup pro- cedures are completed, you can use the naviga- tion system The screen images used in this section are AVIC- 900DVD as an example. [A CAUTION | + You cannot go back to the previous (pre- upgrade) version of the application after the software upgrade is completed. Also, the map discs that were previously used cannot be used. Instead, use the CNDV- 70T DVDs as your new map discs. 3 Insert the new Pioneer DVD Map Disc to the disc loading slot. When the upgraded programme has been found, installation of the programme starts immediately, [ Hf you cannot insert a disc completely or if an inserted disc is not recognised, check that the label side of the disc is up. Press the EJECT button to eject the disc, and check the disc for damage before inserting the disc again À CAUTION À Park your vehicle in a safe place. Leave the engine on, and make sure that the handbrake is applied 2 Remove the current disc. Press the EJECT button While this screen appears, NEVER switch the key position from ACC or turn the power to the navigation system, off. To param ne ét Lara st ve ar

Das Pagani at. “ram no msmalen. If you use the remote control type, per- form these steps before inserting the upgrade disc.

1. Turn the engine off (or turn the ignition

switch of) Remove the current display from the navi- gation system Connect the touch panel display to the nav- igation system (Refer to the Owner's manual or installa- tion manual for the display.) Turn the engine on (or turn the ignition switch on).

4 Check the details of the caution message and touch “OK”. The map of your surroundings is displayed You can operate the navigation system by touching keys displayed on the screen as usual Perform the following procedure depending on the navigation system 5 Tosetthe time difference, touch “+” or Time difference The time difference between the time origi- nally set in the navigation system (Central European Time) and the current location of your vehicle is shown. If necessary, adjust the time difference. Touching *+" or “-" changes the time difference display in one-hour incre- ments. The time difference can be set from +3 to -8 hours. 6 If necessary, set to summer time. Summer time is off by default. Touch “Sum- mer Time” {o change the time if you are in the summer time period. This turns the dis- play below summer time “On”.

T To complete the setting, touch “Back”. The map of your surroundings appears

PIONEER ELECTRONICS AUSTRALIA PTY. LTD. 178-184 Boundary Road, Braeside, Victoria 3195, Australia TEL: (03) 9586-6300 PIONEER ELECTRONICS OF CANADA, INC. 300 Alstate Parkway, Markham, Ontario L3R OP2, Canada

PIONEER ELECTRONICS DE MEXICO, S.A. de C.V. Bd. Manuel Avila Camacho 138 10 piso - Col. Lomas de Chapultepec, Mexico, D.F 11000 wWww.pioneer.eu

SSRTE RAT : Published by Pioneer Corporation: MNT: dei LIAERRe4anl 3 Copyright © 2007 by Pioneer Corporation.

02) 2521-3588 All rights reserved

ANRT CEA) FRA Printed in Belgium u SRE N ”_ inted in Belgiu UNIS DR LA D OHROO 1-62 Eu