VT-44204 - Lamp V-TAC - Free user manual and instructions

USER MANUAL VT-44204 V-TAC

WEEE Number: 80133970

INSTRUCTION MANUAL

LED FLOOD LIGHT

TECHNICAL DATA

MODEL VT-44035	VT-44055	VT-44104	VT-44204
SKU 23599		23688, 2360023689, 23690	23440,2344123442,23443	2360123602, 23603
POWER 30W 50W	W 100W 200W
LUMENS 2505Lm	4270Lm 8700	Lm 17540Lm
COLOUR TEMPERATURE	3000K	4000K6500K	4000K6500K	4000K6500K
INPUT VOLTAGE	AC: 220-240V, 50Hz
DF	>0.9
CRI	70
LIFE SPAN	25,000 Hours
ON/OFF CYCLE	15,000 Times
BEAM ANGLE	115°
OPERATION TEMPERATURE	-20°C to +40°C
BODY TYPE	Aluminium
MAX. MOUNT-ING HEIGHT	<5M
NET WEIGHT	0.35Kg	0.48Kg	0.97Kg	2.5Kg
PROJECTED AREA (mm2)	25168.5	31011.5	61473.75	140673.75
DIMENSION	164.5x34x-153mm	183.5x34x-169mm	253.5x242.5x40mm	402.5x349x5x-44mm

Exterior view of a white LED light fixture with 'V-TAC' branding and mounting bracket (no additional text or symbols visible)

IP65 RATING

05 YEAR WARRANTY\*

*This product contains a light source of energy efficiency class, where shall be replaced by the energy class of the contained light source.

INTRODUCTION & WARRANTY

Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 5 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.

QR code image containing encoded data, no visible human-readable text

MULTI-LANGUAGE MANUAL QR CODE

Please scan the QR code to access the manual in multiple languages.

WARNING

1. Please make sure to turn off the power before starting the installation.
2. Installation must be performed by a qualified electrician.
3. The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
4. The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed.
5. Replace any cracked protective shield.
6. Terminal block not included.
7. Proper grounding should be ensured throughout the installation.
8. Minimum distance from lighted objects 1m.
9. For outdoor use.

LED REplaceable (LED Only) light source by a professional

NOTE: To reduce the risk of strangulation the flexible wiring connected to this luminaire shall be effectively fixed to the wall if the wiring is within arm's reach.

Caution, risk of electric shock.

This marking indicates that this product should not be disposed of with other household wastes.

Technical line drawing of a rectangular electronic device with directional arrows indicating movement or force (no text or symbols)

Line drawing of a hand using a tool to lift a grid-like structure against a wall (no text or symbols)

Simple line drawing of a screwdriver with two 'X' marks, no text or symbols present

Technical line drawing of a mechanical device with a rod and lever, no text or symbols present

Technical diagram showing a mounted device with a close-up view of the faucet handle and its corresponding control panel with labeled ports.

INSTALLATION INSTRUCTION

• DO NOT USE IN AREAS WITH LIMITED VENTILATION OR OUTSIDE THE RATED AMBIENT TEMPERATURE RANGE. *CON- NECT WITH WATERPROOF CABLE HOUSE ONLY. *ENSURE ELECTRICITY IS SWITCH OFF BEFORE INSTALLATION.
• Please do not mount to a surface that is prone to vibrations.* Remove the screw and the bracket afterward. (Figure 1) Before drilling, mark the hole position for fixing the bracket onto the wall (Screw not supplied). (Figure 2)
• Screw the retaining bracket to the wall with a suitable quantity of screws. (Figure 4)
• Mount the bracket back to the fixture. Adjust the floodlight according to the desired position. Tighten the screw. (Figure 5) Connect your main cable (HO5RN-F3G1.0mm2 Recommended) with the input lead of our product through the waterproof junction box. Note, the line (-) of the lead. (Need to use the junction box of IP65 or above, ensure to tighten the waterproof screw) Switch on the power to make sure if the product is working.

DISASSEMBLY DIAGRAM

For Market surveillance team only

Technical diagram showing a hand inserting a component into an open device, with numbered annotations indicating steps.

Note: Light source removal will void the warranty