e-studio 163 - Printer TOSHIBA - Free user manual and instructions

Product Type	Desktop Multifunction Printer (Copy, Print, Scan)
Model	e-STUDIO163
Dimensions (W x D x H)	600 x 643 x 462.5 mm
Weight	Approx. 31.8 kg
Power Supply	220 - 240 V, 8 A, 50/60 Hz
Power Consumption	Max 1.6 kW (including optional equipment)
Warm-up Time	Approx. 25 seconds
First Copy Time (A4)	7.6 seconds or less
Copy Speed (A4 plain paper)	Up to 16 sheets/minute
Printing Resolution	2400 x 600 dpi (smoothing)
Scanning Resolution	600 x 600 dpi
Paper Input Capacity	250 sheets (drawer) + 100 sheets (bypass)
Paper Sizes	Up to A3 (A3, A4, B4, B5, etc.)
Paper Weight (Drawer)	64 - 80 g/m²
Paper Weight (Bypass)	50 - 163 g/m²
Noise Level (Copying)	55 dB (A)
Noise Level (Idling)	40 dB (A)
Operating Environment	Temperature 10-30°C, Humidity 20-85%
Options	Automatic Document Feeder (MR-2017), Paper Feed Unit (MY-1027)
Included Accessories	Power cable, photoconductive drum, CD-ROM, operator's manual

Frequently Asked Questions - e-studio 163 TOSHIBA

How do I load paper into the drawer?

Pull out the drawer, adjust the paper guides to the paper size, load paper with the print side down, and push the drawer back in. Ensure the paper is flat and not curled.

How do I replace the toner cartridge?

Open the front cover, remove the old toner cartridge, shake the new one gently, insert it until it clicks, and close the cover. The printer will automatically reset.

What should I do if a paper jam occurs?

Check the paper jam location on the display. Open the appropriate covers, gently remove the jammed paper by pulling it in the direction of the paper path, and close all covers. Avoid tearing the paper.

How do I connect the printer to my computer?

Connect the printer to your computer via USB cable. Install the driver from the included CD-ROM or download from the Toshiba website. Follow on-screen instructions to complete setup.

How can I scan a document?

Place the document face down on the glass or in the automatic document feeder. Press the Scan button on the control panel, select scan settings (resolution, file type), and start scanning. The scanned file will be saved to a connected PC.

How do I enable Energy Save mode?

Press the Energy Save button on the control panel. The printer will enter low-power mode. To exit, press any button or send a print job. You can adjust the timeout in the settings menu.

What types of paper can I use?

The printer supports plain paper, thick paper, and recycled paper. Recommended paper weight is 64-80 g/m² for the drawer and up to 163 g/m² for the bypass tray. Use sizes up to A3.

How do I clean the printer?

Turn off and unplug the printer. Use a soft, lint-free cloth slightly dampened with water to clean the exterior and glass. Do not use alcohol or solvents. Clean the corona wire inside using the cleaning tool provided.

What does error code F08 mean?

Error F08 typically indicates a paper jam or a problem with the paper feed. Check all paper paths, including the bypass tray and duplex unit. Clear any jammed paper and reset the printer.

How do I perform a test copy?

Place an original on the glass. Press the Copy button, set the number of copies (e.g., 1), and press Start. The printer will produce a test copy. Check quality and alignment.

USER MANUAL e-studio 163 TOSHIBA

MULTIFUNCTIONELE DIGITALE SYSTEMEN

EPA ENERGY STAR® (MFD)

Specifications of Options 108

Packing List ....109

Hoofdstuk 8 INSTALLATIE INSTRUCTIE USB PRINTER / SCANNER

VOORDAT U GAAT KOPIËREN

9. [SPAAR STAND] . [ENERGY SAVE] toets/LED

10. [FUNCTIE WIS] . [FUNCTION CLEAR] toets/LED

17. [LADE] . [DRAWER] toets/LED's

LT: Letter, LD: Ledger, LG: Legal, ST: Statement, COMP: Computer

Aanbevolen papier

Opmerking

Tip

Tip

Opmerking

Opmerkingen

1. Symbool klep, deksel of deur geopend

Papierstoring na de transporteenheid

Voorzichtig

Naar beneden trekken

Voorzichtig

Opmerking

Opmerking

1. Scangebied

2 Reinig de corona.

Opmerking

6 Sluit de zijdeur.

7

SPECIFICATIONS AND OPTIONS

e-STUDIO163 Specifications....106

Specifications of Options....108

Packing List....109

e-STUDIO163 Specifications

Model name DP-1640
Type Desktop type
Original glass Fixed
Printing (copying) system Indirect electrophotographic method
Developing system 2-component magnetic brush developing
Fusing method 2 halogen lamps
Photosensor type OPC
Original scanning system Flat surface scanning system(When the Automatic Document Feeder is installed: Fixed scanning system by feeding the original)
Original scanning sensor Linear CIS sensor
Scanning light source LED
Resolution Scanning	600 dpi x 600 dpi
	Writing	2400 dpi x 600 dpi (Smoothing process)
Acceptable originals		Sheets, books and 3-dimensional objects
Acceptable original size		Max. A3
Acceptable copy paper size	Drawer	A3, A4, A4-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R, COMP, 13"LG
	Bypass	A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R, ST-R, COMP, 13" LG
Acceptable copy paper weight	Drawer	64 - 80 g/m2
	Bypass	50 - 163 g/m2
Warm-up time		Approx. 25 seconds
First copy time (A4 portrait)		7.6 seconds or less
Continuous copy speed		See P.107 "Continuous copying speed"
Multiple copying		Up to 999 copies (digital key entry)
Excluded image width	Copy	Leading edge: 3.0±2.0 mm, Trailing edge: 3.0±2.0 mm, Both edges: 2.0±2.0 mm
	Printer	Leading edge: 5.0±2.0 mm, Trailing edge: 5.0±2.0 mm, Both edges: 5.0±2.0 mm
Reproduction ratio	Actual size	100±0.5%
	Zoom	25 - 200% (in 1% increments)
Paper supply	Drawer	250 sheets (80 g/m2)
	Bypass	100 sheets (80 g/m2)
Toner density adjustment		Magnetic auto-toner system
Exposure control		Automatic plus manual selection from 7 exposure steps
Environment (for normal use)		Temperature: 10° - 30°C, Humidity: 20 - 85% (No condensation)
Power requirements		220 - 240 V±10%, 8 A (50/60 Hz), 127 V±10%, 12 A (50/60 Hz) (for Saudi Arabia 100 V version only)
Power consumption		At least 1.6 kW (including optional equipments), At least 1.5 kW (including optional equipments) (for Saudi Arabia 100 V version only)
Noise		Idling: 40 dB (A) Copying: 55 dB (A)
Dimensions (equipment only)		600 mm (W) x 643 mm (D) x 462.5 mm (H)
Weight		Approx. 31.8 kg (equipment including drum)
Space occupied (equipment only)		904 mm (W) x 643 mm (D)
Storage capacity		Max. 250 sheets or until the memory is full (TOSHIBA's own chart)

• These specifications vary depending on the copying conditions and the environment.

- Specifications and appearance are subject to change without notice in the interest of product improvement.

Continuous copying speed

e-STUDIO163

sheets/min.

Paper size Feeder		Media type
		Plain paper THICK PAPER 1 THICK PAPER 2
A4, A5-R*1, B5, LT, ST-R*1	Drawer 16 - -
	Bypass tray 16 16 16
A4-R, B5-R, LT-R Drawer	15.5 - -
	Bypass tray	15.5	14.5	14.5
B4, FOLIO, LG, COMP, 13" LG	Drawer 13 - -
	Bypass tray 13 12 12
A3, LD	Drawer	11	- -
	Bypass tray 11	10.5	10.5

*1 A5-R and ST-R can be placed only on the bypass tray.

- The values above are measured when originals are set on the original glass, 100% and non-sort multiple copies are made.

- TOSHIBA-recommended paper is used for the values of the specifications above.

- The bypass copying speed is as listed above when specifying the paper size.

- This specification varies depending on the copying conditions and the environment.

Specifications of Options

Automatic Document Feeder

Model name MR-2017
Copy sides 1-side
Number of originals (A4)	100 originals (50 - 80 g/m 2 ) or 16 mm or less in height (more than 80 g/m 2 )
Feeding speed 45.5 - 182 mm/s
Acceptable originals A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R, ST-R, COMP (A5 and ST size are not acceptable.)
Paper weight	50 - 127 g/m 2
Power source Power supplied from the equipment
Dimensions 600 mm (W) x 513 mm (D) x 135 mm (H)
Weight Approx. 11.0 kg
Power consumption 30 W max.

Paper Feed Unit

Model name MY-1027
Acceptable paper size A3	A4, A4-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R, COMP, 13"LG (Non-standard sizes are not acceptable.)
Paper weight	64 - 80 g/m 2
Maximum capacity	250 sheets (80 g/m 2 )
Dimensions 530 mm (W)	x 577 mm (D) x 125 mm (H)
Weight Approx. 5.0 kg

TOSHIBA-recommended paper is used for the values above. Specifications and appearance are subject to change without notice in the interest of product improvement.

Packing List

Packing list Set-up	Instructions
	Operator's Manual
	Power cable
	Photoconductive drum
	Operator's Manual pocket
	Set-up report
	CD-ROM (2 pcs.)

cd-rom:\Driv_USB\e-ST163,203\WinXP\Dutch