WX500L.9 - Saw WORX - Free user manual and instructions
Find the device manual for free WX500L.9 WORX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Saw |
| Brand | Worx |
| Model | WX500L.9 |
| Power | 500 W |
| Power Source | Corded electric |
| Voltage | 230 V / 50 Hz |
| Blade Diameter | 165 mm |
| Arbor Size | 20 mm |
| Cutting Depth at 90° | 55 mm |
| Cutting Depth at 45° | 40 mm |
| No Load Speed | 5000 rpm |
| Bevel Capacity | -1° to 45° |
| Weight | 4.0 kg |
| Dimensions (L x W x H) | 320 x 260 x 260 mm |
| Safety Features | Blade guard, lock-off switch, spindle lock |
| Maintenance | Clean after use, lubricate moving parts, check carbon brushes |
| Spare Parts Availability | Yes, through Worx service centers |
| Included Accessories | Blade, rip fence, wrench |
Frequently Asked Questions - WX500L.9 WORX
How do I change the blade on my Worx WX500L.9 saw?
Disconnect the saw from power. Use the spindle lock to secure the blade, then use the included wrench to loosen the arbor nut. Remove the old blade and mount the new one, ensuring the teeth face forward. Tighten the nut and release the spindle lock.
What is the maximum cutting depth of the WX500L.9?
The maximum cutting depth at 90 degrees is 55 mm, and at 45 degrees it is 40 mm. Adjust the depth lever to set the desired cutting depth.
Can I use this saw for bevel cuts?
Yes, the saw can bevel from -1° to 45°. Loosen the bevel adjustment knob, set the angle, and tighten it before cutting.
How do I clean and maintain the saw?
After each use, wipe the saw with a dry cloth. Clean the blade guard and vents with compressed air. Lubricate the pivot points with light oil periodically. Check carbon brushes for wear every 50 hours.
What type of blade does the WX500L.9 use?
It uses a 165 mm diameter blade with a 20 mm arbor. Use blades designed for circular saws, such as wood-cutting or multi-purpose blades.
Is the saw equipped with a safety guard?
Yes, it has a retractable blade guard that automatically covers the blade when not in use. Always ensure the guard functions correctly before operation.
How do I adjust the cutting depth?
Locate the depth adjustment lever on the side of the saw. Loosen the lever, move the base plate to set the blade protrusion, then tighten the lever securely.
Where can I find spare parts for the Worx WX500L.9?
Spare parts are available from Worx service centers and authorized retailers. You can also order online via the Worx website or contact their customer service.
What should I do if the saw does not start?
First, check the power cord and outlet. Ensure the lock-off switch is disengaged. If it still doesn't start, check the carbon brushes; if worn, replace them. Contact Worx support if the issue persists.
Can I use the saw for cutting metal?
The saw is primarily designed for wood. For metal cutting, use a specific metal-cutting blade and proceed at a slower feed rate. Always wear eye protection and follow safety guidelines.
User questions about WX500L.9 WORX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual WX500L.9 - WORX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WX500L.9 by WORX.