9PTH-3 - Power outlet Karlik - Free user manual and instructions

Product Type	Antenna Outlet Socket (RTV/SAT)
Brand	Karlik
Model	9PTH-3
Category	Uncategorized
Application	Indoor antenna connection for TV and satellite
Connection Type	Coaxial (F-type or similar)
Number of Ports	1 input, 1 output (pass-through capable)
Installation Box Size	60 mm
Mounting Method	Spikes or fastening screws
Material	Plastic body, metal contacts
Color	White (typical)
Dimensions (approx)	86 x 86 x 30 mm
Weight (approx)	100 g
Operating Temperature	-10°C to 40°C
Frequency Range	5-2400 MHz (specify typical)
Impedance	75 ohms
Safety Note	Install by qualified person, deactivated voltage
Compliance	National safety standards
Maintenance	Keep dry and clean
Included Accessories	Frame with cap
Warranty	2 years (typical)

Frequently Asked Questions - 9PTH-3 Karlik

What is the Karlik 9PTH-3 used for?

The Karlik 9PTH-3 is an antenna outlet socket for connecting TV and satellite (RTV/SAT) coaxial cables in a wall installation.

How do I install the 9PTH-3 socket?

Strip the coaxial cable, insert it into the socket, tighten the clamping bolt, and mount the socket into a 60mm installation box using spikes or screws. Finally, attach the frame and cap.

Is the 9PTH-3 a pass-through socket?

Yes, it supports pass-through connections. The output procedure is the same as the input.

What type of cable does the 9PTH-3 require?

It requires a standard coaxial antenna cable with external insulation, over-wrap, and center conductor.

Can I install the 9PTH-3 myself?

No, assembly should be performed by a suitably qualified person with deactivated voltage, following national safety standards.

What is the size of the installation box needed?

A 60mm flush-mounted installation box is required.

Does the 9PTH-3 come with a frame?

Yes, the package includes a frame with a cap to be placed on the main body.

What is the frequency range of the 9PTH-3?

It is designed for typical TV/satellite signals, covering 5-2400 MHz (approximate).

How do I clean the 9PTH-3 socket?

Keep it dry and clean; use a soft cloth if needed. Avoid moisture and abrasive cleaners.

Where can I find the user manual?

The manual is available for free download on notice-facile.com in PDF format.

USER MANUAL 9PTH-3 Karlik

ASSEMBLY MANUAL OF RTV AND RTV-SAT OUTLET SOCKETS

1. Prepare end of the antenna cable for installation, i.e. strip the wire of the coaxial cable by cutting at the same height the external insulation, over-wrap and the centre of the cable. (picture no. 1)
2. Unscrew the clamping bolt in the antenna outlet socket (picture no. 2).
3. Insert the antenna cable so as blade of the socket enters between the over-wrap and the external insulation. Check if the wires of the cable are inserted into the input clamp in a correct way (picture no. 4).
4. Tighten the clamping bolt in the antenna outlet socket (picture no. 5).
5. For pass-through sockets - procedure for socket output is the same as for socket input.
6. Insert the socket into the φ 60mm installation box and according to the type of box assembly the socket with either the spikes or the fastening screws.
7. Place the frame with the cap on the main body of the outlet socket..

PICTURE NO.1

PICTURE NO.2

PICTURE NO.3

PICTURE NO.4

PICTURE NO.5

NOTE!

Assembly shall be held by a suitably qualified person with deactivated voltage and shall meet the national safety standards.