RV-3 - Power outlet Karlik - Free user manual and instructions

Product Type	Antenna Outlet Socket (RTV/RTV-SAT)
Brand	Karlik
Model	RV-3
Compatible Box Size	60 mm installation box
Connection Type	Coaxial cable with clamp bolt
Pass-through Capability	Yes (for pass-through sockets)
Material	Plastic and metal components
Color	White (typical)
Dimensions (approx.)	85 x 85 x 40 mm (standard plate)
Weight (approx.)	50 g
Power Supply	Not applicable (passive device)
Functions	Signal distribution for terrestrial and satellite TV
Installation Method	Screw or spike fastening to 60mm box
Safety Note	Assembly by qualified person, de-energized voltage
Standards Compliance	National safety standards
Maintenance	Clean with dry cloth; avoid moisture
Spare Parts	Frames and caps available separately
Repairability	Not user-serviceable; replace if faulty
Included Accessories	Socket, frame, cap, screws/spikes
Warranty	Standard manufacturer warranty (check local)

Frequently Asked Questions - RV-3 Karlik

How do I strip the coaxial cable for installation?

Strip the external insulation, over-wrap, and center conductor at the same height. Refer to picture no. 1 in the manual.

What is the purpose of the clamping bolt?

The clamping bolt secures the antenna cable inside the socket. Unscrew it before inserting the cable, then tighten firmly.

Can I use this socket for satellite TV?

Yes, the RV-3 is designed for RTV and RTV-SAT (satellite) outlet sockets.

What size installation box is required?

This socket fits a standard 60mm installation box.

How do I attach the socket to the box?

Use either the provided spikes or fastening screws, depending on the box type.

Is it safe to install the socket myself?

Installation should be performed by a suitably qualified person with deactivated voltage, in compliance with national safety standards.

What tools do I need for installation?

You will need a wire stripper for coaxial cable, a screwdriver for the clamping bolt and fastening screws, and possibly a drill for spikes.

Can I use this socket outdoors?

The manual does not specify outdoor use. It is intended for indoor installation in dry locations.

How do I clean the socket?

Wipe with a dry cloth. Do not use liquids or abrasive cleaners.

What if the cable is not properly inserted?

Ensure the center conductor contacts the blade and the over-wrap is between the insulation layers, as shown in picture no. 4.

USER MANUAL RV-3 Karlik

ASSEMBLY MANUAL OF RTV AND RTV-SAT OUTLET SOCKETS

1. Prepare end of the antenna cable for installation, i.e. strip the wire of the coaxial cable by cutting at the same height the external insulation, over-wrap and the centre of the cable. (picture no. 1)
2. Unscrew the clamping bolt in the antenna outlet socket (picture no. 2).
3. Insert the antenna cable so as blade of the socket enters between the over-wrap and the external insulation. Check if the wires of the cable are inserted into the input clamp in a correct way (picture no. 4).
4. Tighten the clamping bolt in the antenna outlet socket (picture no. 5).
5. For pass-through sockets - procedure for socket output is the same as for socket input.
6. Insert the socket into the φ 60mm installation box and according to the type of box assembly the socket with either the spikes or the fastening screws.
7. Place the frame with the cap on the main body of the outlet socket..

PICTURE NO.1

PICTURE NO.2

PICTURE NO.3

PICTURE NO.4

PICTURE NO.5

NOTE!

Assembly shall be held by a suitably qualified person with deactivated voltage and shall meet the national safety standards.