LP 4118 - Printer Triumph-Adler - Free user manual and instructions
Find the device manual for free LP 4118 Triumph-Adler in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Monochrome Laser Printer |
| Brand | Triumph-Adler |
| Model | LP 4118 |
| Dimensions (W x D x H) | 400 x 370 x 250 mm |
| Weight | 10 kg |
| Power Requirements | 220-240 V, 50/60 Hz |
| Power Consumption (Printing) | 550 W |
| Power Consumption (Standby) | 10 W |
| Print Speed | 18 pages per minute (A4) |
| Print Resolution | 1200 x 1200 dpi |
| Paper Input Capacity | 250 sheets |
| Duplex Printing | Automatic |
| Connectivity | USB 2.0, Ethernet 10/100 Base-TX |
| Supported Media Sizes | A4, A5, Letter, Legal, Envelopes |
| Monthly Duty Cycle | Up to 15,000 pages |
| Maintenance | Clean regularly, replace toner when low |
| Safety Instructions | Avoid moisture, use grounded outlet, do not block vents |
| Repairability | Replaceable toner cartridge and drum unit; spare parts available |
| Operating Temperature | 10°C to 32°C |
| Operating Humidity | 20% to 80% RH |
Frequently Asked Questions - LP 4118 Triumph-Adler
How do I load paper into the LP 4118?
Open the paper tray, adjust the paper guides to the size of paper you are using (e.g., A4), insert the paper stack with the print side facing up, then close the tray. Ensure the stack does not exceed the maximum fill line.
How do I replace the toner cartridge?
Open the front cover, remove the old toner cartridge by pulling it out. Unpack the new cartridge, shake it gently from side to side to distribute toner, then insert it into the printer until it clicks into place. Close the front cover.
What should I do if there is a paper jam?
Open the front cover and remove the toner cartridge if necessary. Gently pull out any jammed paper from the rollers. Check the paper tray and the rear exit. Avoid tearing the paper. Reinstall the toner cartridge and close the cover.
How do I connect the LP 4118 to my computer?
Use a USB 2.0 cable to connect the printer to your computer, or connect via Ethernet to your network. Install the driver software from the included CD or download from the Triumph-Adler support website. Follow on-screen instructions.
How do I print from my mobile device?
Ensure the printer is connected to the same network as your mobile device. Download the Triumph-Adler mobile print app or use AirPrint (for iOS) or Google Cloud Print (for Android). Select the document and print.
How do I perform a factory reset?
On the printer control panel, press the Menu button. Navigate to 'Setup' or 'Admin Settings', then select 'Factory Reset' or 'Initialize'. Confirm the action. The printer will restart with default settings.
How do I clean the printer?
Turn off the printer and unplug it. Use a soft, lint-free cloth slightly dampened with water to wipe the exterior. For the interior, use a toner vacuum or dry cloth. Do not use abrasive cleaners or solvents.
What type of paper can I use?
The LP 4118 supports A4, A5, Letter, Legal, and envelopes. Use paper between 60 g/m² and 120 g/m². Avoid wrinkled, damp, or curled paper to prevent jams.
How do I enable duplex printing?
Go to the printer properties on your computer. In the 'Finishing' or 'Layout' tab, select 'Print on Both Sides' or 'Duplex'. Ensure the printer supports auto duplex (LP 4118 does). Confirm and print.
Where can I find spare parts or user manuals?
Visit the Triumph-Adler support website at www.triumph-adler.com. Enter model LP 4118 to find manuals, drivers, and spare parts like toner cartridges, drum units, and maintenance kits.
User questions about LP 4118 Triumph-Adler
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Printer in PDF format for free! Find your manual LP 4118 - Triumph-Adler and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LP 4118 by Triumph-Adler.
