S1385WHBe - Projector ACER - Free user manual and instructions

Product Type	DLP Projector
Brand	Acer
Model	S1385WHBe
Display Technology	DLP
Native Resolution	1280 x 800 (WXGA)
Brightness	3000 ANSI Lumens
Contrast Ratio	20,000:1
Lamp Life (Normal)	5000 hours
Lamp Life (Eco)	10000 hours
Throw Ratio	0.49:1 (Short Throw)
Keystone Correction	Vertical ±40°
Inputs	Analog VGA, HDMI (MHL), Composite Video, S-Video, Component via adapter, USB, RJ45, RS232
Wireless Connectivity	Optional: WirelessHD dongle, WiFi adapter, Chromecast
Built-in Speaker	2 W (Mono)
3D Support	Yes (DLP Link)
Dimensions (W x D x H)	300 x 230 x 100 mm (approx.)
Weight	3.2 kg (approx.)
Power Consumption	260 W (Normal), 0.5 W (Standby)
Noise Level	30 dB (Eco mode)
Certifications	FCC, CE, TCO Certified, Energy Star
Spare Parts Available	Lamp module, air filter, remote control, power cord
Maintenance	Clean air filter every 500 hours; replace lamp when indicator lights up

Frequently Asked Questions - S1385WHBe ACER

How do I connect my laptop to the Acer S1385WHBe projector?

Connect using a VGA cable or HDMI cable from your laptop to the corresponding input on the projector. Then select the correct source (e.g., VGA or HDMI) via the projector's menu or remote control.

How do I clean the air filter on my projector?

Turn off the projector and unplug it. Locate the air filter cover on the side, remove the filter, and gently vacuum or wash with mild detergent. Allow to dry completely before reinserting. Clean every 500 hours of use.

How do I replace the lamp?

Ensure the projector is off and unplugged. Wait for it to cool. Remove the lamp cover screws, detach the old lamp, and insert a new Acer approved lamp module. Tighten screws and replace cover. Reset the lamp counter via the menu.

The projector shows 'No Signal' – what should I do?

Check that the source device is powered on and properly connected. Press the Source button on the remote to cycle through inputs. Ensure the correct cable is used (HDMI/VGA). If using a laptop, ensure it is set to extend or duplicate display.

How do I adjust the keystone correction?

Press the Keystone button on the remote control. Use the arrow keys to correct vertical distortion until the image is rectangular. You can also adjust via the projector's OSD menu.

Can I use a wireless connection with this projector?

Yes, an optional WirelessHD dongle, USB WiFi adapter, or Chromecast can be used. Insert the dongle into the HDMI port and USB power port, then configure via the remote or projector settings.

How do I reset the lamp hours counter?

After replacing the lamp, go to Settings > Lamp Settings > Lamp Hour Reset in the OSD menu. Select 'Yes' to reset the counter. This ensures accurate lamp life tracking.

The remote control is not working – what can I do?

First, check the batteries. Replace if dead. Ensure there is no obstruction between the remote and the projector's IR sensor. If still not working, try pointing directly at the sensor (front or back). Reset the projector by unplugging for 10 seconds.

How do I enable 3D playback?

Connect a 3D source via HDMI. Press the 3D button on the remote. Select the 3D format (e.g., Side by Side, Top and Bottom) from the menu. Wear compatible DLP Link 3D glasses.

Why is the projector overheating and shutting down?

Ensure the air inlet and outlet vents are not blocked. Clean the air filter. Check if the ambient temperature exceeds 35°C (95°F). The projector will shut down automatically to protect components. Reduce room temperature or use eco mode.

USER MANUAL S1385WHBe ACER

Acer Projektor P5227/P5327W/P1285i/ P1285B/P1385Wi/P1385WB/ S1385WHBe/S1385WHie/ S1385WHne-serie Bruksanvisning

Fjärrkontroll Snabbstartguide

WirelessHD-dongelset (MWIHD1) (tillval)

SmartPen & PB dongle (tillval)

USB WiFi-adapter (tillval)

Acer projektor multimedia (CD-ROM-skiva) (tillval)

Acer projektor multimedia snabbstartsguide (tillval)

Chromecast (tillval)

# Beskrivning # Beskrivning
1 Strömsladd 9 3 RCA-komponent-sladd
2 VGA-sladd 10 HDMI (MHL)-sladd
3 VGA-till-komponentvideo/HDTV-adapter		11 RJ45-kabel
4 Kompositvideosladd 12 WirelessHD-donge
5 Ljudsladd 13 Trådlös dongel
6 S-videosladd 14* USB-lagringsenhet/USB W		Wifi-adapter(tillval)
7 RS232-sladd
8 U S B - s l a d d

Takmontering

Kanada — Low-power license-exempt radio communication devices (RSS-210)

a Gemensam information

Declaration of Conformity

We,

Acer Incorporated

8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwan

Contact Person: Mr. RU Jan, e-mail:[e-mail]

And,

Acer Italy s.r.l

Via Lepctit, 40, 20020 Lainate (MI) Italy

Tel: [phone], Fax: [phone]

www.acer.it

Declare under our own responsibility that the product:

Product: DLP Projector

Trade Name: Acer

Model Number: P5227/P5327W/P1285i/P1285B/P1385Wi/P1385WB/S1385WHBe/S1385WHnc/S1385WHie series

To which this declaration refers conforms to the relevant standard or other standardizing documents:

• EN55022:2010 Class B; EN 55024:2010
• EN61000-3-2:2006+A1:2009+A2:2009, Class A
• EN61000-3-3:2008
• EN 60950-1:2006/A11:2009/A1:2010+A12:2011
• Regulation (EC) No. 1275/2008; EN 62301:2005
• EN50581:2012

We hereby declare above product is in compliance with the essential requirements and other relevant provisions of EMC Directive 2004/108/EC, Low Voltage Directive 2006/95/EC and RoHS Directive 2011/65/EU and Directive 2009/125/EC with regard to establishing a framework for the setting of ecodesign requirements for energy-related product.

Year to begin affixing CE marking 2015.

NuJaw

RU Jan/Sr. Manager

Regulation Center, Acer Inc.

Jan. 26, 2015 -

Date

Declaration of Conformity

We,

Acer Incorporated

8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwan

Contact Person: Mr. RU Jan, e-mail:[e-mail]

And,

Acer Italy s.r.l

Via Lepetit, 40, 20020 Lainate (MI) Italy

Tel: [phone], Fax: [phone]

www.acer.it

Declare under our own responsibility that the product:

Product: DLP Projector

Trade Name: Acer

Model Number: P1285B/P1385WB/S1385WHBe/H6518BD series

To which this declaration refers conforms to the relevant standard or other standardizing documents:

• EN55022:2010 Class B; EN55024:2010
• EN301 489-1 V1.9.2; EN301 489-17 V2.2.1
• EN300 328 V1.8.1
• EN61000-3-2:2006+A1:2009+A2:2009, Class A
• EN61000-3-3:2008
• EN60950-1:2006/A11:2009/A1:2010+A12:2011
• Regulation (EC) No. 1275/2008; EN 62301:2005
• EN50581:2012

We hereby declare above product is in compliance with the essential requirements and other relevant provisions of EMC Directive 2004/108/EC, Low Voltage Directive 2006/95/EC, R&TTE Directive 1999/5/EC and RoHS Directive 2011/65/EU and Directive 2009/125/EC with regard to establishing a framework for the setting of ecodesign requirements for energy-related product.

Year to begin affixing CE marking 2015.

RU Jan/Sr. Manager

Regulation Center, Acer Inc.

Apr. 29, 2015 -

Date

Federal Communications Commission Declaration of Conformity

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The following local Manufacturer /Importer is responsible for this declaration:

Product: DLP Projector

Model Number: QNX1416/QWX1417/QNX1412/

QWX1414/QWX1420/QWX1424 series

Name of Responsible Party: Acer America Corporation

Address of Responsible Party: 333 West San Carlos St.

Suite 1500

San Jose, CA 95110

U.S.A.

Contact Person: Acer Representative

Phone No.: 254-298-4000

Fax No.: 254-298-4147

Congratulations!

This product is TCO Certified – for Sustainable IT

TCO Certified is an international third party sustainability certification for IT products. TCO Certified ensures that the manufacture, use and recycling of IT products reflect environmental, social and economic responsibility. Every TCO Certified product model is verified by an accredited independent test laboratory.

This product has been verified to meet all the criteria in TCO Certified, including:

Corporate Social Responsibility

Socially responsible production - working conditions and labor law in manufacturing country

Energy Efficiency

Energy efficiency of product and power supply. Energy Star compliant, where applicable

Environmental Management System

Manufacturer must be certified according to either ISO 14001 or EMAS

Minimization of Hazardous Substances

Limits on cadmium, mercury, lead & hexavalent chromium including requirements for mercury-free products, halogenated substances and hazardous flame retardants

Design for Recycling

Coding of plastics for easy recycling. Limit on the number of different plastics used.

Product Lifetime, Product Take Back

Minimum one-year product warranty. Minimum three-year availability of spare parts. Product takeback

Packaging

Limits on hazardous substances in product packaging. Packaging prepared for recycling

Ergonomic, User-centered design

Visual ergonomics in products with a display. Adjustability for user comfort (displays, headsets)

Acoustic performance - protection against sound spikes (headsets) and fan noise (projectors, computers)

Ergonomically designed keyboard (notebooks)

Electrical Safety, minimal electro-magnetic Emissions

Third Party Testing

All certified product models have been tested in an independent, accredited laboratory.

A detailed criteria set is available for download at www.tcodevelopment.com, where you can also find a searchable database of all TCO Certified IT products.

TCO Development, the organization behind TCO Certified, has been an international driver in the field of Sustainable IT for 20 years. Criteria in TCO Certified are developed in collaboration with scientists, experts, users and manufacturers. Organizations around the world rely on TCO Certified as a tool to help them reach their sustainable IT goals. We are owned by TCO, a non-profit organization representing office workers. TCO Development is headquartered in Stockholm, Sweden, with regional presence in North America and Asia.

For more information, please visit

www.tcodevelopment.com