Randolph TBL.15476 - Watch Timberland - Free user manual and instructions

USER MANUAL Randolph TBL.15476 Timberland

Timberland and are trademarks of TRL Licensing LLC.

2016 x TBL Licensing LLC. All rights reserved.

Timberland

VR32/VR34

INSTRUCTION MANUAL

Size: 170 x 55mm

Color: PMS 448c

Two adjacent rectangular panels with no text, numbers, or symbols visible.

Features • 24-hour, hour, minute and second hands • Dots • Support • 2 Support, hands, second and minute hands • The stepwatch can measure up to 29.5% • Split time measurement is available • Battery Life Indicator When the battery moves to end, the second hand moves at two-second intervals instead of the normal one-second intervals. In that case, have the battery replaced with a new one as soon as positive. Note: The watch remains accurate while the second hand is meeting at two-second intervals. When the second hand moves at two-second intervals, the stepwatch does not operate. If the second hand starts to move to two-second intervals while the stopwatch is measuring the stepwatch measurement, a move and the stepwatch takes return to the 1st position. How to set time and date 1. • Pull the crown out to the 1st click position 2. • Pull the crown counter-clockwise and the previous day's dose appears Note: Do not set the close between 100 MHz and 100 AM. Otherwise, the date may not change properly. 3. • Pull the crown out to the 2nd click position within the second hand is in the 12 seconds position. Note: When the stopwatch is or too soon being measured on a stopper, if the crown is pulled out to the 2nd click position, it will automatically rotate the Stopwatch hands to 10. 4. • Pull the crown to set the hour and minute hands. • Turn the crown clockwise to advance the hour and minute hands past 1200 minutes. The will advance the data to the current data. • Take AMPH into consideration when setting the hour and minute hands or the closed time.

• Battery Life Indicator

When the battery nears its end, the second hand moves at two-second intervals instead of the normal one-second intervals. In that case, have the battery replaced with a new one as soon as possible. Note: The watch remains accurate while the second hand is moving at two-second intervals.

When the second hand moves at two-second intervals, the stopwatch does not operate. If the second hand starts to move at two-second intervals while the stopwatch is measuring the stopwatch measurement a reset and the stopwatch hands return to the "0" position.

How to set time and date

• Pull the crown out to the 1st click position. • Turn the crown counter clockwise until the

previous day's date appears Note: Do not see the date between 3:00 PM and 1:00 AM. Otherwise, the date may not change properly.

3

4.

• Turn the crown to set the hour and minuse

lamb. • Turn the crown clock was to advance the hour and minute lamb past 1200 minutes. This will advance the data to the current data.

Take AM/PM into consideration when setting the hour and minute hands to the desired time.

5.

Recommend - When setting the minute hand, first adverse it is to 5 minutes ahead of the desired time and then turn is back to the exact minute.

- Push the crown back to the normal position.

How to use stopwatch functions

- The stopwatch can measure up to 295% in one-second increments

- When the measurement reaches 30 minutes, the stopwatch automatically stops counting

STOPWATCH

START STOP RESTART

STOPWATCH second hand

* Before using the stopwatch, be sure to check that the crown is set at the normal position and that the

stopwatch hands are reset to the "V" position. Note: If the stopwatch hands do not return to the "V" position when the stopwatch is reset to "0", follow the procedure in "Stopwatch hand position adjustment."

- The stopwatch second hand is capable of timing 30 minutes. (60 seconds a 30 times) - The stopwatch minus hand is capable of timing 30 minutes. - Whether the stopwatch hands return to the "0" position in a clockwise rotation or in a counter-clockwise rotation is decided depending on the elapsed time, the stopwatch has measured.

Stopwatch hand position adjustment If the stopwatch hands are not in the '0' position, follow the procedure below to set them to the '0' position.

[Non-Text]

- Pull the crown out to the 2nd click position. Note: While the stopwatch is running or has been stopped while running, if the crown is pulled out to the 2nd click position, the stopwatch will be automatically reset.

2

To move the stopwatch hands

CLOKING.

Prase B. to move the stopwatch hands counter-clockwise

3.

- Push the crown back to the normal section.

- Press Button "A" or "B" to set the stopwatch hands to the "0" position. - The movements of the stopwatch minute hand and stopwatch second hand are interlocked. To set the stopwatch minute hand to the "0" position, continue to move the stopwatch second hand and the stopwatch minute hand reaches the "0" position. Note: The stopwatch minute and second hand move quickly if Button "A" or "B" is kept pressed.

Caratteristiche

- Spireps in carons with pascions normal.

the day is, we change the support and here was.

Repetition Six Tatty

belangen St. Tiste D,

in Geuverträgen-

in Legend: 12.0g/m

so dehagen

3.

drinking

[Unreadable]

water reductance level

without any

marking

1240/10

6.47381 00mm

10 ATM/190

DATE: 200

• Always set the crown in the normal position /

Tighton screw-lock brown completely.

For example, a sum of the total capital is 100%

- When the watch is underwater or wet, never use the pulley/beats, or set the time. Watch cases and metal brackets should be cured through in fresh water after boiling in salt water.

- Non-affirmers may be easily obtained at investors. E-mail: [e-mail], 103/45687, www.famino.com

1-2: Pull crown stopper sideways off the crown.
3-4: Push crown inside to activate the watch.

• Using the chronograph function after or leaving it, not constantly will shorten battery life considerably, it is not advisable to net the chronographisopewich function continuously. To conserve battery power, it is best to put the chronograph:

Pure geometric diagram with a rectangle and corner markers (no text or symbols)