MHC-NXM3 - Hi-Fi System SONY - Free user manual and instructions

Product Type	Mini Hi-Fi Component System
Model	MHC-NXM3
Main Unit Dimensions (W x H x D)	Approx. 230 × 292 × 355 mm
Main Unit Weight	Approx. 6.1 kg
Speaker Dimensions (W x H x D)	Approx. 173 × 275 × 265 mm each
Speaker Weight	Approx. 3.9 kg net per speaker
Amplifier Output (RMS)	100 W + 100 W (4 ohms, 1 kHz, 10% THD)
Power Requirements	120 V - 240 V AC, 50/60 Hz (adjustable with voltage selector)
Power Consumption	65 W
CD Player Type	Compact disc and digital audio system (supports CD, CD-R/RW, MP3)
Tape Deck	4-track 2-channel stereo, auto reverse, supports TYPE I (normal) tape
Tuner	FM/AM stereo tuner with 20 FM + 10 AM presets
Sound Enhancement	Dynamic Sound Generator X-tra (DSGX) and MP3 BOOSTER
Timer Functions	Sleep Timer, Play Timer, Rec Timer
Recording Features	CD-TAPE Synchro Recording, Manual Recording, Program Recording
Playback Modes	Normal, Shuffle, Program, Repeat, Album Play
Display	Backlit LCD with dimmer control (3 levels)
Power Saving Mode	Turns off display and clock to minimize standby power consumption (0.3 W)
Inputs/Outputs	VIDEO/MD IN (analog), DIGITAL OPTICAL OUT, Headphone jack
Supplied Accessories	Remote Commander, 2 AA batteries, AM loop antenna, FM lead antenna, speaker pads, speaker cords
Safety Features	Class 1 laser product, ventilation holes, auto shut-off when overheated

Frequently Asked Questions - MHC-NXM3 SONY

How do I set the clock on the Sony MHC-NXM3?

Press CLOCK/TIMER SET on the remote. Use I◄◄ or ►►I to set the hour, press ENTER. Then set the minutes using the same buttons and press ENTER again. The clock starts automatically.

Can I play MP3 files on this system?

Yes, the system supports MP3 files on CD-R/RW discs. Files must have the .MP3 extension and be recorded in ISO9660 Level 1/2 or Joliet format. Maximum of 300 MP3 files per disc and up to 150 albums.

How do I preset radio stations?

Press TUNER BAND to select FM or AM. Press TUNING MODE until AUTO appears, then press - or + to auto-scan. When a station is found, press TUNER MEMORY, select a preset number with -/+, and press ENTER. You can store up to 20 FM and 10 AM stations.

How do I record a CD onto a cassette tape?

Load a recordable tape into Deck B. Press CD and load the disc. Select recording side and play mode (e.g., both sides). Press CD SYNC on the unit, then press ● START. Recording begins. You can also program specific tracks using Program Play.

What should I do if the sound skips when playing a CD?

First, clean the disc with a soft cloth from the center outward. If the problem persists, try moving the system to a stable surface away from vibrations. Also, ensure the speakers are not causing vibration—place them on separate stands if needed.

How do I use the Sleep Timer?

Press SLEEP on the remote repeatedly to select the desired time (AUTO, 90, 80, ... 10 minutes, or OFF). The system will turn off automatically after the set time. AUTO turns off after 100 minutes or when the current disc/tape finishes.

Can I wake up to music using the Play Timer?

Yes, first set the clock. Prepare the source (CD, tape, or tuner). Press CLOCK/TIMER SET, select PLAY SET?, set the start and stop times, choose the sound source (TUNER, CD PLAY, or TAPE PLAY), and press ENTER. Turn off the system; it will start playing at the set time.

What is the Power Saving Mode and how do I activate it?

Power Saving Mode turns off the display and clock when the system is off to reduce standby power consumption (0.3 W). Press DISPLAY repeatedly while the system is off until the display goes blank. To cancel, press DISPLAY again.

How do I clean the tape heads?

Clean the tape heads after every 10 hours of use. Use a commercially available dry or wet cleaning cassette. Follow the instructions provided with the cleaning cassette. Also demagnetize the heads every 20-30 hours using a demagnetizing cassette.

What should I do if the remote control stops working?

First, check for obstacles between the remote and the system’s sensor. Replace the batteries (2x AA). If still not working, move closer to the system or away from fluorescent lights. If none help, reset the system by unplugging the power cord for a few seconds.

USER MANUAL MHC-NXM3 SONY

Mini Hi-Fi Component System

Operating Instructions GB

To prevent fire, do not cover the ventilation of the apparatus with news papers, table-cloths, curtains, etc. And don't place lighted candles on the apparatus.

To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus.

Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.

This appliance is classified as a CLASS 1 LASER product. This marking is located on the rear exterior.

Don't throw away the battery with general house waste, dispose of it correctly as chemical waste.

Table of Contents

How to use this manual....4

Playable discs....4

Getting Started

Hooking up the system....6

Setting the clock....8

CD/MP3 - Play

Loading a disc....9

Playing a disc....9

— Normal Play/Shuffle Play

Playing repeatedly....11

— Repeat Play

Creating your own program....11

— Program Play

Tuner

Presetting radio stations....12

Listening to the radio .....14

— Preset Tuning

— Manual Tuning

Using the Radio Data System (RDS)....15

(European model only)

Tape - Play

Loading a tape....16

Playing a tape....16

Tape - Recording

Recording your favorite CD tracks on a tape....17

— CD-TAPE Synchro Recording

Recording on a tape manually....18

— Manual Recording

Sound Adjustment

Adjusting the sound ....19

Timer

Falling asleep to music 20

— Sleep Timer

Waking up to music.... 21

— Play Timer

Timer recording radio programs...... 22

— Rec Timer

Display

Turning off the display.... 23

— Power Saving Mode

Adjusting the brightness of the display back light.... 23

Viewing information about the disc in the display 24

Optional Components

Hooking up optional components...... 25

Listening to audio from a connected component.... 26

Recording on a connected component.... 26

Troubleshooting

Problems and remedies.... 27

Messages.... 30

Additional Information

Precautions.... 31

Specifications.... 32

List of button locations and reference pages.... 35

How to use this manual

This manual mainly explains operations using the remote, but the same operations can also be performed using the buttons on the unit having the same or similar names.

playable discs

You can play back the following discs on this system. Other discs cannot be played back.

List of playable discs

Format of discs Disc logo
Audio CDs
CD-R/CD-RW(audio data/MP3 files)

Discs that this system cannot play

• CD-ROMs
• CD-Rs/CD-RWs other than those recorded in the following formats:

- music CD format

- MP3 format that conforms to ISO9660 ^1) Level 1/Level 2, Joliet or Multi Session ^2

• A disc that has a non-standard shape (e.g., card, heart).
  • A disc with paper or stickers on it.
• A disc that has the adhesive, cellophane tape, or a sticker still left on it.
  • Data part of CD-Extras 3)
  • Data track of Mixed CDs 4)

1) ISO9660 Format

The most common international standard for the logical format of files and folders on a CD-ROM. There are several specification levels. In Level 1, file names must be in the 8.3 format (no more than eight characters in the name, no more than three characters in the extension “.MP3”) and in capital letters. Folder names can be no longer than eight characters. There can be no more than eight nested folder levels. Level 2 specifications allow file names and folder names up to 31 characters long. Each folder can have up to 8 trees.

For Joliet in the expansion format (file and folder names can have up to 64 characters) make sure of the contents of the writing software, etc.

2) Multi Session

This is a recording method that enables adding of data using the Track-At-Once method.

Conventional CDs begin at a CD control area called the Lead-in and end at an area called Lead-out. A Multi Session CD is a CD having multiple sessions, with each segment from Lead-in to Lead-out regarded as a single session.

3) CD-Extra: This format records audio (audio CD data) on the tracks in session 1 and data on the tracks in session 2.
4) Mixed CD: This format records data on the first track and audio (audio CD data) on the second and subsequent tracks of a session.

Notes on CD-R and CD-RW

• Some CD-Rs or CD-RWs cannot be played on this system depending upon the recording quality or physical condition of the disc, or the characteristics of the recording device. Furthermore, the disc will not play if it has not been correctly finalized. For more information, see the operating instructions for the recording device.
• Discs recorded on CD-R/CD-RW drives may not be played back because of scratches, dirt, recording condition or the driver's characteristics.
• CD-R and CD-RW discs recorded in multi-session that have not ended by “closing the session” are not supported.
• The system may be unable to play MP3 format files that do not have the “.MP3” extension.
• Attempting to play non-MP3 format files that have the “.MP3” extension may result in noise or malfunction.
• With formats other than ISO9660 level 1 and 2, folder names or file names may not be displayed correctly.

• The following discs take a longer time to start playback.

• a disc recorded with complicated tree structure.

• a disc recorded in Multi Session.
• a disc to which data can be added (non-finalized disc).

Music discs encoded with copyright protection technologies

This product is designed to playback discs that conform to the Compact Disc (CD) standard. Recently, various music discs encoded with copyright protection technologies are marketed by some record companies. Please be aware that among those discs, there are some that do not conform to the CD standard and may not be playable by this product.

Cautions when playing a disc that is recorded in Multi Session

• If the disc begins with a CD-DA session, it is recognized as a CD-DA (audio) disc, and playback continues until an MP3 session is encountered.
• If the disc begins with an MP3 session, it is recognized as an MP3 disc, and playback continues until a CD-DA (audio) session is encountered.
• The playback range of an MP3 disc is determined by the tree structure of files produced by analyzing of the disc.
• A disc with a mixed CD format will be recognized as a CD-DA (audio) disc.

Getting Started

Hooking up the system

Perform the following procedures 1 to 4 to hook up your system using the supplied cords and accessories. MHC-NXM3 is used for illustration purpose.

1 Connect the speakers.

Connect the right and left speaker cords to the SPEAKER terminals on the unit and to the terminals on the speakers (MHC-NXM3 only) as shown below.

Main Unit

Speakers (MHC-NXM3 only)

2Connect the FM and AM antennas.

Set up the AM loop antenna, then connect it.

graph LR
    A["Rectangular Component"] --> B["Multi-layered Assembly"]
    B --> C["Final Panel with Magnified Component"]

Extend the FM lead antenna horizontally

Note

Keep the antennas away from the speaker cords.

3 For models with a voltage selector, set VOLTAGE SELECTOR to the local power line voltage.

Refer to the print on your system's VOLTAGE SELECTOR for available settings.

* Saudi Arabian model: 120 – 127 V

4 Connect the power cord to a wall outlet.

The demonstration appears in the display. When you press I/∅, the system turns on and the demonstration automatically ends. If the plug does not fit the wall socket, detach the supplied plug adaptor (only for models equipped with an adaptor).

Inserting two R6 (size AA) batteries into the remote

Diagram of two open electrical remote control devices with battery contacts and a switch mechanism (no text or symbols)

Note

If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage and corrosion.

Tip

With normal use, the batteries should last for about six months. When the remote no longer operates the system, replace both batteries with new ones.

Attaching the speaker pads

Attach the supplied speaker pads to the bottom of the speakers to stabilize the speakers and prevent them from slipping.

Simple line drawing of a rectangular frame with four vertical supports and dashed lines indicating hidden edges (no text or symbols)

When carrying this system

Perform the following procedure to protect the CD mechanism. Use buttons on the unit for the operation.

1 Make sure that all discs are removed from the system.
2 Press CD.
3 Hold down ■ and then press CD until "LOCK" appears.
4 Unplug the power cord.

Setting the clock

Use buttons on the remote for the operation.

1 Press I/⏻ to turn on the unit.
2 Press CLOCK/TIMER SET.
3 Press I◄◄ or ►►I repeatedly to set the hour.
4 Press ENTER.
5 Press I◀◀ or ▶▶▶I repeatedly to set the minute.
6 Press ENTER.

The clock starts working.

To adjust the clock

1 Press CLOCK/TIMER SET.
2 Press ◀◀◀ or ▶▶▶I repeatedly to select "CLOCK SET?", then press ENTER.
3 Do the same procedures as step 3 to 6 above.

Note

The clock is not displayed in Power Saving Mode.

CD/MP3 – Play

Loading a disc

Use buttons on the unit for the operation.

1 Press DISC 1 - 5 to select the disc tray.

When no disc is in the disc tray you selected, “No Disc” appears. Perform step 2 while “DISC-1” (eg., 2 – 5) flashes.

2 Press CD ▲.

3 Place a disc with the label side up on the disc tray.

When you play a 8 cm disc, place it on the inner circle of the tray.

Illustration of hands operating a microwave oven with a circular disc on the lid (no text or symbols visible)

4 Press CD ▲ again to close the disc tray.

Notes

• Do not use a disc with tape, seals or paste on it as this may cause malfunction.
• Do not forcibly press the disc tray closed with your finger, as this may cause malfunction.

Playing a disc

— Normal Play/Shuffle Play

This system lets you play audio CDs and discs with MP3 audio tracks.

Example: When a disc is loaded

1 Press CD (or FUNCTION repeatedly) to switch the function to CD.

2 Press PLAY MODE repeatedly in stop mode until the mode you want appears in the display.

Select To play
ALL DISCS(Normal Play)	All discs in the disc traycontinuously.
1DISC(Normal Play)	The tracks on the disc youhave selected in originalorder.
ALBM(Normal Play)	All MP3 audio tracks in thealbum on the disc you haveselected in original order.When playing a non-MP3disc, Album Play performsthe same operation as 1DISCPlay.
ALL DISCSSHUF (ShufflePlay)	The tracks on all discs inrandom order.
1DISC SHUF(Shuffle Play)	The tracks on the disc youhave selected in randomorder.
ALBM SHUF(Shuffle Play)	The MP3 audio tracks in thealbum on the disc you haveselected in random order.When playing a non-MP3disc, Album Shuffle Playperforms the same operationas 1DISC SHUF Play.
PGM(Program Play)	The tracks on the disc in theorder you want them to beplayed (see “Creating yourown program” on page 11).

continued

3 Press ▶ (or ◀▶ on the unit).

Other operations

To Do this
Stop play Press ■.
Pause Press ■■. Press again to resume play.
Select a track	Press ◀◀◀ or ▶▶▶I repeatedly.
Select an album of MP3*	Press ALBUM – or + repeatedly after step 2.
Find a point in a track	Keep pressing ◀◀◀ or ▶▶▶ during playback and release it at the desired point.
Select a disc in stop mode	Press DISC SKIP (or DISC 1 – 5 on the unit).
Switch to CD function from another source	Press DISC 1 – 5 on the unit (Automatic Source Selection).
Remove a disc Press DISC 1 – 5 on the unit, then press CD ▲ on the unit.

* You may not be able to search between multiple files. Also, the time may not be displayed correctly for some files.

Notes

• You cannot change the play mode during playback.
• Some time may be needed to start playback of discs recorded in complex configurations such as many layers.
• When the disc is inserted, the player reads all the tracks on that disc. If there are many albums or non-MP3 audio tracks on the disc, it may take a long time for play to begin or for the next MP3 audio track to start play.
• Do not save unnecessary albums or tracks other than MP3 ones in the disc to be used for MP3 listening. We recommend that you do not save other types of tracks or unnecessary albums on a disc that has MP3 audio tracks.
• An album that does not include an MP3 audio track is skipped.
  • Maximum album number: 150 (including root folder)
• The maximum number of MP3 audio tracks and albums that can be contained on a single disc is 300.
• Playback is possible up to 8 levels.
• MP3 audio tracks are played back in the order that they are recorded on the disc.
• Depending on the encoding/writing software, recording device, or the recording media used at the time an MP3 audio track is recorded, you may encounter such problems as disabled playback, sound interruptions, and noise.

Tip

When disc access takes a long time, set “CD POWER ON” by CD power manage function (page 13).

Playing repeatedly

— Repeat Play

You can play all the tracks or a single track on a disc repeatedly.

Press REPEAT repeatedly during playback until "REP" or "REP1" appears.

REP: For all the tracks on a disc, or all the MP3 audio tracks in an album up to five times.

REP1: For a single track only.

To cancel Repeat Play

Press REPEAT repeatedly until both “REP” and “REP1” disappear.

Notes

• You cannot select "REP" and "ALL DISCS SHUF" at the same time.
• When you select "REP1", that track is repeated endlessly until "REP1" is canceled.

Creating your own program

—Program Play

You can make a program of up to 25 steps from all the discs in the order you want to play them. You can synchro record the programmed tracks onto a cassette tape (page 17).

1 Press CD (or FUNCTION repeatedly) to switch the function to CD.
2 Press PLAY MODE in stop mode repeatedly until "PGM" appears.
3 Press DISC SKIP (or DISC 1 - 5 on the unit) to select a disc.

To program all the tracks on a disc at once, proceed to step 5 with "AL" displayed.

4 Press I◀◀ or ▶▶▶I repeatedly until the desired track number appears.

When programming the MP3 audio tracks, press ALBUM – or + to select album, then press ◀◀◀ or ▶▶▶ repeatedly until the desired track number appears.

Selected track number
Total playing time (including selected track)

Disc tray number

5 Press ENTER.

The track is programmed.

The program step number appears, followed by the total playing time.

6 Program additional discs or tracks.

To program Repeat steps
Other discs 3 and 5
Other tracks on the same disc	4 and 5
Other tracks on other discs	3 to 5

7 Press ▶ (or ◀ on the unit).

Program Play starts.

Other operations

To Do this

Cancel Program Play Press PLAY MODE repeatedly in stop mode until “PGM” disappears.
Clear a track from the end	Press CLEAR in stop mode.

Tips

• The program you made remains after Program Play finishes. To play the same program again, press CD (or FUNCTION repeatedly) to switch the function to CD, then press ▶ (or ◀▶ on the unit). However, the program is cleared when you open the disc tray.
• “--.-” appears when the total CD program time exceeds 100 minutes, or when you select a CD track whose number is 21 or over, or when you select an MP3 audio track.

Tuner

Presetting radio stations

You can preset up to 20 FM stations and 10 AM stations. You can then tune in any of those stations simply by selecting the corresponding preset number.

Automatic tuning preset

You can automatically tune in all of the stations that can be received in your area and then store the radio frequency of the desired stations.

1 Press TUNER BAND (or FUNCTION repeatedly) to switch the function to tuner.
2 Press TUNER BAND repeatedly to select "FM" or "AM".
3 Press TUNING MODE repeatedly until "AUTO" appears in the display.
4 Press - or + (or TUNING - or + on the unit).

The frequency changes as the system scans for a station. Scanning stops automatically when a station is tuned in. At that time, "TUNED" and "ST" (for stereo program only) appear.

If "TUNED" does not appear and the scanning does not stop

Set the frequency of the desired radio station as described in “Manual tuning preset” (page 13).

5 Press TUNER MEMORY.

The preset number flashes. Perform steps 6 and 7 while the preset number flashes.

Preset number

6 Press - or + (or TUNING - or + on the unit) repeatedly to select the desired preset number.
7 Press ENTER.
8 Repeat steps 2 through 7 to store other stations.

Tip

Press TUNING MODE to stop scanning.

Manual tuning preset

You can manually tune in and store the radio frequency of the desired stations.

1 Press TUNER BAND (or FUNCTION repeatedly) to switch the function to tuner.
2 Press TUNER BAND repeatedly to select "FM" or "AM".
3 Press TUNING MODE repeatedly until "AUTO" and "PRESET" disappear from the display.
4 Press - or + (or TUNING - or + on the unit) repeatedly to tune in the desired station.
5 Press TUNER MEMORY.
6 Press - or + (or TUNING - or + on the unit) repeatedly to select the desired preset number.
7 Press ENTER.
8 Repeat steps 2 through 7 to store other stations.

Other operations

To Do this
Tune in a station with a weak signal	Follow the procedure described in “Manual tuning preset” (page 13).
Set another station to the existing preset number	After step 5, press – or + (or TUNING – or + on the unit) repeatedly to select the preset number you want to store the station.

To improve tuner reception

When tuner reception is poor, set CD player power off by CD power manage function. CD power is factory set to on. Use buttons on the unit for the operation.

1 Press CD.
2 Press I/⏻ to turn off the system.
3 Press I/While holding ■. "CD POWER OFF" appears.

To set CD power on

Repeat the procedure above and “CD POWER ON” appears.

Notes

• When “CD POWER OFF” is selected, disc access time is increased.
• You cannot change the setting in Power Saving Mode (page 23).

To change the AM tuning interval (except for European, Russian and Saudi Arabian models)

The AM tuning interval is factory-preset to 9 kHz (or 10 kHz for some areas). To change the AM tuning interval, tune in any AM station first, then turn off the system. While holding ■, press I/⏻ on the unit. When you change the interval, all the AM preset stations are erased. To reset the interval, repeat the same procedure.

Note

You cannot change the AM tuning interval in Power Saving Mode (page 23).

Tips

• The preset stations are retained for about half a day even if you disconnect the power cord or if a power failure occurs.
• To improve broadcast reception, adjust the supplied antennas, or connect a commercially available external antenna.

Listening to the radio

You can listen to a radio station either by selecting a preset station, or by manually tuning in the station.

Listening to a preset station

— Preset Tuning

Preset radio stations in the tuner's memory first (see “Presetting radio stations” on page 12).

1 Press TUNER BAND (or FUNCTION repeatedly) to switch the function to tuner.
2 Press TUNER BAND repeatedly to select "FM" or "AM".
3 Press TUNING MODE repeatedly until "PRESET" appears in the display.
4 Press - or + (or TUNING - or + on the unit) repeatedly to select the desired preset station.

Listening to non-preset radio station

— Manual Tuning

1 Press TUNER BAND (or FUNCTION repeatedly) to switch the function to tuner.
2 Press TUNER BAND repeatedly to select "FM" or "AM".
3 Press TUNING MODE repeatedly until "AUTO" and "PRESET" disappear from the display.
4 Press - or + (or TUNING - or + on the unit) repeatedly to tune in the desired station.

Note

When switching to CD function from tuner, a longer time may be required to access the disc. In this case, set "CD POWER ON" by CD power manage function (page 13).

Tips

• To improve broadcast reception, adjust the supplied antennas, or connect a commercially available external antenna.
• When an FM stereo program has static noise, press FM MODE repeatedly until “MONO” appears. There will be no stereo effect, but the reception will improve.
• Press TUNING MODE repeatedly until “AUTO” appears in step 3 above, then press – or + (or TUNING – or + on the unit). The frequency indication changes and scanning stops when the system tunes in a station (Automatic Tuning).
• To record the radio programs, use manual recording (page 18).

Using the Radio Data System (RDS)

(European model only)

What is the Radio Data System?

Radio Data System (RDS) is a broadcasting service that allows radio stations to send additional information along with the regular program signal. RDS is available only on FM stations.*

Note

RDS may not work properly if the station you are tuned in is not transmitting the RDS signal properly or if the signal is weak.

* Not all FM stations provide RDS service, nor do they provide the same types of services. If you are not familiar with the RDS system, check with your local radio stations for details on RDS services in your area.

Receiving RDS broadcasts

Simply select a station from the FM band.

When you tune in a station that provides RDS services, the station name appears in the display.

To check the RDS information

Each time you press DISPLAY, the display changes cyclically as follows:

Station name* → Frequency → Program type* → Clock display → Bass level → Treble level

* If the RDS broadcast is not properly received, the station name or the program type may not appear in the display.

Tape – Play

Loading a tape

1 Press A TAPE ▲ or TAPE ▲ B on the unit.
2 Load a recorded/recordable tape into the cassette holder.

With the side you want to play/record facing towards you.

Line drawing of a door handle with a downward arrow indicating direction (no text or symbols)

Playing a tape

You can use TYPE I (normal) tape.

1 Load a tape.
2 Press TAPE (or FUNCTION repeatedly) or TAPE A/B on the unit to switch the function to TAPE.

3 Press TAPE (or TAPE A/B on the unit) repeatedly to select deck A or B.

4 Press PLAY MODE repeatedly to select “⇌” to play one side. Select “(⇐)”* to play both sides. Select “RELAY” (Relay Play)* to play both decks in succession.

5 Press ▶ (or ◀▶ on the unit).

The tape starts playing. Press the button again to play the reverse side.

* Relay play always follow this cyclic sequence: Deck A (front side) → Deck A (reverse side) → Deck B (front side) → Deck B (reverse side) For MHC-NXM1, deck A does not play the reverse side.

Other operations

To Do this
Play the reverse side*	Press ▶ (or ◀ on the unit) again during play.
Stop play Press ■.
Pause Press ■.	Press again to resume play.
Fast-forward or rewind	Press ◀ or ▶ in stop mode.
Remove a tape	Press A TAPE ▲ or TAPE ▲ B on the unit.

* For MHC-NXM1, deck A does not play the reverse side.

Searching for the beginning of the current or the previous or the next track (AMS)\*

To go forward

Press ▶▶ during play.

Each time you press the button, the search direction, + (forward), and number of tracks being skipped (1 to 9) appear.

To go back

Press ◀◀ during playback.

Each time you press the button, the search direction, - (back), and number of tracks being skipped (1 to 9) appear.

* AMS (Automatic Music Sensor)

Note

The AMS function may not operate correctly under the following circumstances:

- When the unrecorded space between songs is less than 4 seconds long.

- When the system is placed near a television.

Tips

• If you select “(⇌)” or “RELAY”*, the deck stops automatically after repeating the sequence five times.
• When a tape is inserted, corresponding forward (▶)/reverse (◀) indicators light.
  * For MHC-NXM1, deck A does not play the reverse side.

Tape – Recording

Recording your favorite CD tracks on a tape

— CD-TAPE Synchro Recording

You can record a whole CD on a tape. You can use TYPE I (normal) tape. The recording level is adjusted automatically. Use buttons on the unit for the operation.

1 Load a recordable tape into deck B.
2 Press TAPE A/B to select deck B, then press ◀▶ repeatedly to select recording side. And press ■ to stop playback.
3 Press PLAY MODE on the remote repeatedly to select “⇌” to record on one side. Select “(⇌)” (or “RELAY”) to record on both sides.
4 Press CD and load a disc you want to record.

When you want to record an album from an MP3 disc, be sure to press ALBUM – or + to select the desired album before proceeding.

5 Press CD SYNC.

Deck B stands by for recording. "REC" flashes.

6 Press ● START.

Recording starts.

To stop recording

Press ■.

To record a disc by specifying track order

You can record only your favorite CD tracks using Program Play. Between steps 4 and 5, perform steps 2 to 6 of “Creating your own program” (page 11).

Tips

• When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side.
• If you select both sides recording and the tape reaches the end of the front side part-way through a track, the entire track is recorded again from the beginning of the reverse side.

Recording on a tape manually

— Manual Recording

You can record just the portions you like from a CD, tape or radio program on a tape.

You can also record from connected components (see “Hooking up optional components” on page 25).

Use buttons on the unit for the operation.

1 Load a recordable tape into deck B.
2 Press TAPE A/B to select deck B, then press ◀▶ repeatedly to select recording side. And press ■ to stop playback.
3 Press PLAY MODE on the remote repeatedly to select “⇌” to record on one side. Select “(↔)” (or “RELAY”) to record on both sides.

4 Press one of the following buttons to select the desired source to record.

• CD: To record from this system's CD player.
• TAPE A/B: To record from this system's tape deck A.
• TUNER/BAND: To record from this system's tuner.
  • VIDEO/MD: To record from the optional component connected to the VIDEO/MD IN jacks.

5 Press ● START.

Deck B stands by for recording.

"REC" flashes.

6 Press ● START, then start playing the desired source to record.

Recording starts.

Other operations

To Do this

Stop recording Press ■.

Pause recording Press ● START on the unit.

Notes

• You cannot listen to other sources while recording.
• If TAPE B is selected in step 4, silence is recorded.

Tips

• For recording from the tuner:
  If noise is heard while recording from the tuner, move the respective antenna to reduce the noise.
• When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side.

Sound Adjustment

Adjusting the sound

Generating a more dynamic sound (Dynamic Sound Generator X-tra)

Press DSGX on the unit.

Each time you press the button, the display changes as follows:

DSGX ON ↔ DSGX OFF

Generating a more attractive sound (MP3 BOOSTER)

You can enjoy a more attractive sound when playing MP3 audio tracks.

1 Press CD (or FUNCTION repeatedly) to switch the function to CD.
2 Hold DSGX on the unit for 2 seconds.

Each time you hold the button for 2 seconds, the display changes as follows: BOOSTER ON BOOSTER OFF

Adjusting the bass and treble

You can adjust the bass and treble to enjoy more powerful sound.

1 Press EQ repeatedly to select "BASS" or "TREBLE".

Each time you press the button, the display changes as follows:

BASS TREBLE

2 Press I◀◀ or ▶▶I repeatedly to adjust the level while “BASS” or “TREBLE” appears.

To adjust the bass on the unit

Turn BASS control.

To adjust the treble on the unit

Turn TREBLE control.

To exit the bass and treble settings

If you do not perform any operations for 4 seconds, the display automatically returns to the original display.

Timer

Falling asleep to music

— Sleep Timer

You can set the system to turn off after a certain time, so that you can fall asleep to music.

Press SLEEP.

Each time you press the button, the minute display (the turn-off time) changes cyclically as follows:

$$ \begin{array}{l}\text {AUTO*} \rightarrow 9 0 \mathrm{min} \rightarrow 8 0 \mathrm{min} \rightarrow \dots \rightarrow 1 0 \mathrm{min}\\rightarrow \text {OFF}\end{array} $$

* The system automatically turns off in 100 minutes or after the current disc or tape finishes playing.

Other operations

To Press
Check the remaining time*	SLEEP once.
Change the time to turn off	SLEEP repeatedly to select the time you want.
Cancel the Sleep Timer Function	SLEEP repeatedly until “OFF” appears.

* You cannot check the remaining time if you select "AUTO".

Tip

You can use the Sleep Timer, even if you have not set the clock.

Waking up to music

—Play Timer

You can wake up to music at a preset time. Make sure you have set the clock (see “Setting the clock” on page 8).

Use buttons on the remote for the operation.

1 Prepare the sound source you want to play.

• CD: Load a disc. To start from a specific track, make a program (see “Creating your own program” on page 11).
• Tape: Load a tape (see “Playing a tape” on page 16).
• Tuner: Tune in the preset radio station (see “Listening to the radio” on page 14).

2 Press VOLUME +/- to adjust the volume.

3 Press CLOCK/TIMER SET.

4 Press I◀◀ or ▶▶▶I repeatedly to select "PLAY SET?", then press ENTER.

“ON” appears and the hour indication flashes.

5 Set the time to start playing.

Press ◀◀◀ or ▶▶▶ repeatedly to set the hour, then press ENTER. The minute indication flashes.

Press ◀◀◀ or ▶▶▶ repeatedly to set the minute, then press ENTER.

6 Set the time to stop playing following the same procedure as step 5.

7 Press I◀◀ or ▶▶▶I repeatedly until the desired sound source appears.

Each time you press the button, the display changes cyclically as follows:

graph LR
    A["TUNER"] <--> B["CD PLAY"]
    B --> C["TAPE PLAY"]

8 Press ENTER.

The start time, the stop time and the sound source appear in turn, then the original display returns.

9 Press I/⏻ to turn off the system.

Other operations

To Do this

Check the setting 1 Press CLOCK/TIMER SELECT.2 Press ◀◀◀ or ▶▶▶I repeatedly until “PLAY SELECT?” appears, then press ENTER.
Change the setting Start over from step 1.
Cancel the timer	1 Press CLOCK/TIMER SELECT.2 Press ◀◀◀ or ▶▶▶I repeatedly until “TIMER OFF?” appears, then press ENTER.

Notes

• You cannot activate the Play Timer and the Rec Timer at the same time.
• If you use the Play Timer and the Sleep Timer at the same time, the Sleep Timer has priority.
• Do not operate the system from the time the system turns on until the play starts (about 15 seconds before the preset time).
• If the system is on about 15 seconds before the preset time, the Play Timer will not be activated.
• You cannot use the optional component connected to VIDEO/MD IN jacks as the sound source for Play Timer.

Timer recording radio programs

— Rec Timer

You can record a preset radio station from a specified time.

To timer record, you must first preset the radio station (see “Presetting radio stations” on page 12) and set the clock (see “Setting the clock” on page 8).

Use buttons on the remote for the operation.

1 Tune in the preset radio station (see "Listening to a preset station" on page 14).

2 Press CLOCK/TIMER SET.

"PLAY SET?" appears.

3 Press I◀◀ or ▶▶▶ repeatedly to select "REC SET?", then press ENTER.

“ON” appears and the hour indication flashes.

4 Set the time to start recording.

Press ◀◀◀ or ▶▶▶ repeatedly to set the hour, then press ENTER.

The minute indication flashes.

Press ◀◀◀ or ▶▶▶ repeatedly to set the minute, then press ENTER.

5 Set the time to stop recording following the same procedure as step 4.

The start time, the stop time, and the preset radio station to be recorded (e.g., “TUNER FM 5”) appear in turn, before the original display returns.

6 Load a recordable tape into deck B.

7 Press TAPE to switch the function to TAPE.

8 Press PLAY MODE repeatedly until appears to record on one side or (or () ) to record on both sides.

9 Press ◀▶ on the unit repeatedly to select recording side.

If you select both sides recording or front side recording, press ◀▶ to light up the >>> indicator. If you record on the reverse side, press ◀▶ again to light up the <<< indicator.

10 Press I/ ^① to turn off the system.

Other operations

To Do this

Check the setting 1 Press CLOCK/TIMER SELECT.2 Press ◀◀◀ or ▶▶▶I repeatedly until “REC SELECT?” appears, then press ENTER.
Change the setting Start over from step 1.
Cancel the timer	1 Press CLOCK/TIMER SELECT.2 Press ◀◀◀ or ▶▶▶I repeatedly until “TIMER OFF?” appears, then press ENTER.

Notes

• You cannot activate the Play Timer and the Rec Timer at the same time.
• If you use the the Rec Timer and the Sleep Timer at the same time, the Sleep Timer has priority.
• Do not operate the system from the time the system turns on until the recording starts (about 15 seconds before the preset time).
• If the system is on about 15 seconds before the preset time, the Rec Timer will not be activated.
• The volume is reduced to minimum during recording.

Display

Turning off the display

— Power Saving Mode

The demonstration display (display window and buttons lighting and flashing even when the system power is off) and the clock display can be turned off to minimize the amount of power consumed during standby (Power Saving Mode).

Press DISPLAY repeatedly while the system is off until the demonstration display or the clock display disappears.

To cancel Power Saving Mode

Press DISPLAY while the system is off. Each time you press the button, the display switches cyclically as follows:

Demonstration display Clock display*

No display (Power Saving Mode)

* “--:---” appears if you have not set the clock.

Note

You cannot perform the following operations in Power Saving Mode.

• setting the clock
  – changing the AM tuning interval (except for European, Russian and Saudi Arabian models)
  – turning on the system by pressing the function buttons
• changing the CD power manage function

Tips

• I/○ indicator lights up even in Power Saving Mode.
• The timer continues to operate in Power Saving Mode.

Adjusting the brightness of the display back light

Press DIMMER on the unit repeatedly to select the desired setting while the system is on.

The display changes cyclically as follows: DIMMER OFF → DIMMER 1 → DIMMER 2 → DIMMER 3*

* DIMMER 3 is the darkest.

Viewing information about the disc in the display

You can check the playing time and remaining time of the current track or that of the disc. When a CD-TEXT disc or a disc with MP3 audio tracks is loaded, you can also check the information recorded on disc, such as the titles. When the unit detects CD-TEXT discs, the “CD TEXT” indication appears in the display. When the unit detects MP3 discs, the “MP3” indication appears in the display.

Checking the remaining time and titles (CD/MP3)

Press DISPLAY during Normal Play.

Each time you press the button, the display changes cyclically as follows: Current track number and elapsed playing time → Current track number and remaining time or “--.-” ^1) → Remaining time of the disc or “--.-” ^1) → Track title (CD-TEXT disc or disc with MP3 audio tracks ^2) only) → Album name (disc with MP3 audio tracks only) → Clock display (for eight seconds) → Bass level (for eight seconds) → Treble level (for eight seconds)

1) For discs with MP3 audio tracks
2) When you play back a track with an ID3 tag ver. 1 or ver. 2, the ID3 tag appears. The ID3 tag displays only the track title information.

Checking the total playing time and titles (CD/MP3)

Press DISPLAY in stop mode.

Each time you press the button, the display changes cyclically as follows:

■ When a CD/MP3 is in Normal Play mode

TOC display ^1) or total album number of the disc ^2) or total track number of the current album ^3) Disc title ^4) or volume label ^5) or album name ^5) Clock display (for eight seconds) Bass level (for eight seconds) Treble level (for eight seconds)

1) TOC = Table of Contents; displays total number of tracks on the disc, and total playing time of the disc
^2) For discs with MP3 audio tracks in Normal play or SHUF mode
3) For discs with MP3 audio tracks in ALBM or ALBM SHUF mode
^4) For discs with CD-TEXT
5) For discs with MP3 audio tracks, album titles or volume label may not be displayed depending on the play mode
Depending on the disc, some CD-TEXT information may not appear.

■ When a CD/MP3 is in Program Play mode

The last track number of the program and the total playing time → Total track number of the program (for eight seconds) → Disc title ^1) or volume label ^2) → Clock display (for eight seconds) → Bass level (for eight seconds) → Treble level (for eight seconds)

1) For discs with CD-TEXT

2) For discs with MP3 audio tracks

Checking the station name (TUNER)

Press DISPLAY while listening to the radio.

Each time you press the button, the display changes cyclically as follows:

Station name → Frequency → Clock display (for eight seconds) → Bass level (for eight seconds) → Treble level (for eight seconds)

Optional Components

Hooking up optional components

To enhance your system, you can connect optional components. Refer to the operating instructions provided with each component.

ADIGITAL (OPTICAL) OUT jack

Use a digital optical cable (square, not supplied) to connect an optional component (such as an MD deck) to this jack. You can then record digital audio from this system.

Note

There is no digital audio output from this jack during playback of MP3 audio tracks.

B VIDEO/MD IN jacks

Use audio cords (not supplied) to connect an optional analog component (MD deck or VCR, etc.) to these jacks. You can then listen to the sound from the component.

Listening to audio from a connected component

1 Connect the audio cords.

See “Hooking up optional components” on page 25.

2 Press VIDEO/MD on the unit to switch the function to VIDEO or MD.

Start playing the connected component.

Note

If the sound is distorted or too loud when “VIDEO” is selected or you want to switch back to “MD”, repeat the operation described above to switch to “MD”.

Tip

If you cannot select “MD” by pressing VIDEO/MD repeatedly, hold down VIDEO/MD and then press I/While the power is on. The function will change from “VIDEO” to “MD”, and “MD” will appear in the display. To change back to “VIDEO”, repeat the same procedure.

Recording on a connected component

Making a digital recording

1 Connect the digital optical cord.
2 Start recording. Refer to the operating instructions of the connected component.

Note

You can digitally record from the discs only. However, you cannot record from copy prohibited discs and MP3 audio tracks.

Troubleshooting

Problems and remedies

Should you encounter a problem with your system, do the following:

1 Make sure the power cord and speaker cords are correctly and firmly connected.
2 Find your problem in the troubleshooting checklist below and take the indicated corrective action.

If the problem persists after doing all of the above, consult your nearest Sony dealer.

When the I/○ indicator flashes

Immediately unplug the power cord and check the following items.

• If your system has a voltage selector, is the voltage selector set to the correct voltage? Check the voltage for your region, then make sure the voltage selector is set correctly.
• Are the + and – speaker cords short-circuited?
• Are you using the supplied speakers?
• Is anything blocking the ventilation holes on the rear of the system?

Check all the above items and fix any problems found. After I/○ indicator stops flashing, reconnect the power cord and turn on the system. If the indicator still flashes, or if the cause of the problem cannot be found even after checking all the above items, consult your nearest Sony dealer.

General

The display starts flashing as soon as you plug in the power cord even though you have not turned on the system (see step 4 of "Hooking up the system" (page 6)).

- Press I/While the system is off. The demonstration disappears.

“--:--” appears in the display.

- A power interruption has occurred. Set the clock (page 8) and timer settings (pages 21 and 22) again.

The clock setting/radio presetting/timer is canceled.

• Redo the following:
• "Setting the clock" (page 8)
• “Presetting radio stations” (page 12)
• "Check the setting" (pages 21 and 22)
• “Timer recording radio programs” (page 22)

There is no sound.

• If your system has a voltage selector, make sure the voltage selector is set to the correct voltage.
• Press VOLUME + or turn VOLUME control on the unit clockwise.
• Make sure the headphones are not connected.
• Check the speaker connections (page 6).
• There is no audio output during Rec Timer.

Sound comes from one channel, or unbalanced left and right volume.

• Place the speakers as symmetrically as possible.
• Connect the supplied speakers.

There is severe hum or noise.

• Move the system away from the source of noise.
• Connect the system to a different wall outlet.
• Install a noise filter (commercially available) to the power cord.

The timer cannot be set.

- Set the clock again (page 8).

The timer does not function.

• Check the timer setting and set the correct time (pages 21 and 22).
• Cancel the Sleep Timer Function (page 20).

The remote does not function.

• Remove the obstacle.
• Move the remote closer to the system.
• Point the remote at the system's sensor.
• Replace the batteries (R6/size AA).
• Locate the system away from the fluorescent light.

The system can not be turned on even though you have pressed I/↓.

- Make sure the power cord is connected to wall outlet.

The color irregularity on a TV screen persists.

- Turn off the TV set once, then turn it on after 15 to 30 minutes. If the color irregularity still persists, place the speakers farther away from the TV set.

CD/MP3 player

The disc tray does not open and "LOCKED" appears.

- Contact your Sony dealer or local authorized Sony service facility.

The disc tray does not close.

• Place the disc correctly in the center of the tray.
• Always close the tray by pressing CD ▲ on the unit. Trying to press the tray closed with your fingers may cause problems with the player.

The disc does not eject.

• You cannot eject the disc during CD Synchro Recording. Press ■ to cancel the CD Synchro Recording, then press CD ▲ on the unit to eject the disc.
• Consult your nearest Sony dealer.

Play does not start.

• Check whether a disc is loaded. The disc indicator lights up when a disc is loaded.
• Wipe the disc clean (page 31).
• Replace the disc.
• Place the disc that this system can play.
• Place the disc correctly in the center of the tray.
• Place the disc in the tray with the label side up.
• Remove the disc and wipe away the moisture on the disc, then leave the system turned on for a few hours until the moisture evaporates.
• Press ▶ to start play.

Disc access takes a long time.

- Set “CD POWER ON” by CD power manage function (page 13).

The sound skips.

• Wipe the disc clean (page 31).
• Replace the disc.
• Try moving the system to a place without vibration (e.g., on top of a stable stand).
• Try moving the speakers away from the system, or placing them on separate stands. When you listen to a track with bass sounds at high volume, the speaker vibration may cause the sound to skip.

Play does not start from the first track.

- Press PLAY MODE repeatedly until both “PGM” and “SHUF” disappear to return to Normal Play.

MP3 audio track cannot be played back.

• Recording was not performed according to the ISO9660 level 1 or level 2 format, or Joliet in the expansion format.
• The MP3 audio track does not have the extension “.MP3”.
• The data is not stored in MP3 format.
• Discs containing files other than MPEG 1, 2, 2.5 Audio Layer-3 files cannot be played.

MP3 audio tracks take longer to play back than others.

• After the system reads all tracks on the discs, playback may take more time than usual if:
– the number of albums or tracks on the disc is very large.
– the album and track organization structure is very complex.

The album title, track title and ID3 tag do not appear correctly.

• Use a disc that conforms with ISO9660 level 1, level 2, or Joliet in the expansion format.
  • The disc ID3 tag is not ver. 1 or ver. 2.

Tuner

Severe hum or noise/stations cannot be received.

• Set the proper band and frequency (page 12).
• Connect the antenna properly (page 6).
• Find a place and an orientation that provide good reception, then set up the antenna again. If you cannot obtain good reception, we recommend you connect a commercially available external antenna.
• The supplied FM lead antenna receives signals along its entire length, so make sure you extend it fully.
• Locate the antennas as far away from the speaker cords as possible.
• Consult your nearest Sony dealer if the supplied AM antenna has come off the plastic stand.
• Try turning off surrounding electrical equipment.
• Set “CD POWER OFF” by CD power manage function (page 13).

A stereo FM program cannot be received in stereo.

- Press FM MODE until “MONO” disappears.

Tape deck

After pressing ◀▶, there is a mechanical noise, “Eject” appears in the display, and the unit enters standby mode automatically.

- Insert the cassette correctly.

The tape does not record or play, or there is a decrease in sound level.

• The heads are dirty. Clean them (page 32).
• The record/playback heads are magnetized. Demagnetize them (page 32).

The tape does not erase completely.

- The record/playback heads are magnetized. Demagnetize them (page 32).

There is excessive wow or flutter, or the sound drops out.

- The capstans in the tape deck are dirty. Clean them (page 32).

Noise increases or the high frequencies are erased.

- The record/playback heads are magnetized. Demagnetize them (page 32).

The tape does not record.

• No cassette is loaded. Load a cassette.
• The tab has been removed from the cassette. Cover the broken tab with adhesive tape (page 32).
  • The tape has wound to the end.

Optional components

There is no sound.

• Refer to General item “The clock setting/radio presetting/timer is canceled.” (page 27) and check the condition of the system.
• Connect the component properly (page 25) while checking:
• if the cords are connected properly.
• if the cord plugs are firmly inserted all the way.
• Turn on the connected component.
• Refer to the operating instructions supplied with the connected component and start playing.
• Press FUNCTION repeatedly to select “MD” or “VIDEO” (page 26).

The sound is distorted.

- Set the volume of the connected component lower.

If the system still does not operate properly after performing the above measures, reset the system as follows:

1 Disconnect the power cord.
2 Reconnect the power cord.
3 Press I/⏻ to turn on the system.
4 Press ■, DIMMER and I/○ on the unit.

The system is reset to the factory settings. You should set the settings you made, such as the preset stations, clock, and timer.

Messages

One of the following messages may appear or flash in the display during operation.

CD/MP3

No Disc

There is no disc in the player.

OVER

You have reached the end of the disc while pressing

▶▶ during playback or pause.

Push STOP!

You pressed PLAY MODE during playback.

Step Full!

You tried to program 25 or more tracks (steps).

TAPE

No Tab

You cannot record the tape because the tab has been removed from the cassette.

No Tape

There is no tape in the tape deck.

Timer

OFF TIME NG!

The Play Timer or Rec Timer start and end times are set to the same time.

PUSH SELECT!

You tried to set the clock or timer during timer operation.

SET CLOCK!

You tried to select the timer with the clock not set.

SET TIMER!

You tried to select the timer with the timer not set.

Additional Information

Precautions

On operating voltage

Before operating the system, check that the operating voltage of your system is identical with the voltage of your local power supply.

On safety

• The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off.
• Unplug the system from the wall outlet (mains) if it is not to be used for an extended period of time. To disconnect the power cord (mains lead), pull it out by the plug. Never pull the cord itself.
• Should any solid object or liquid fall into the system, unplug the system and have it checked by qualified personnel before operating it any further.
• AC power cord must be changed only at the qualified service shop.

On placement

• Do not place the system in an inclined position.
• Do not place the system in locations where it is;
  -Extremely hot or cold
  – Dusty or dirty
• Very humid
  – Subject to vibrations
  – Subject to direct sunlight.

- Use caution when placing the unit or speakers on surfaces that have been specially treated (with wax, oil, polish, etc.) as staining or discoloration of the surface may result.

On heat buildup

• Although the system heats up during operation, this is not a malfunction.
• Place the system in a location with adequate ventilation to prevent heat build-up in the system.
• If you continuously use this system at a high volume, the cabinet temperature of the top, side and bottom rises considerably. To avoid burning yourself, do not touch the cabinet.
• To prevent a malfunction, do not cover the ventilation hole.

On the speaker system

This speaker system is not magnetically shielded and the picture on TV sets may become magnetically distorted. In such a case, turn off the power of the TV set once, and after 15 to 30 minutes turn it on again.

If there seems to be no improvement, locate the speaker system further away from the TV set.

On operation

• If the system is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lens inside the CD player. Should this occur, the system will not operate properly. Remove the disc and leave the system turned on for about an hour until the moisture evaporates.
• When you move the system, take out any disc.

If you have any questions or problems concerning your system, please consult your nearest Sony dealer.

Notes on discs

• Before playing, clean the disc with a cleaning cloth. Wipe the disc from the center out.
• Do not use solvents such as benzene, thinner, commercially available cleaners or anti-static spray intended for vinyl LPs.
• Do not expose the disc to direct sunlight or heat sources such as hot air ducts, nor leave it in a car parked in direct sunlight.
• Do not use discs encircled with a protection ring. This may cause a malfunction to the system.
• When using discs that have glue or similar tacky substance on the label side of the disc or that used a special ink when the label was printed, there is a chance that the disc or label may become attached to parts inside this unit. When this occurs, it may not be possible to remove the disc, and may also cause this unit to malfunction. Be sure to check that the label side of the disc is not sticky before using.
  The following types of disc should not be used:
  – Rental or used discs with attached seals where the glue extends beyond the seal. The perimeter of the seal on the disc is tacky.
  – Discs that have labels printed using a special ink that feels tacky when touched.
• Discs with non-standard shapes (e.g., heart, square, star) cannot be played on this unit. Attempting to do so may damage the unit. Do not use such discs.

Cleaning the cabinet

Clean the cabinet, panel and controls with a soft cloth slightly moistened with mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as thinner, benzine or alcohol.

To save a tape permanently

To prevent a tape from being accidentally recorded over, break off the cassette tab from side A or B as illustrated.

If you later want to reuse the tape for recording, cover the broken tab with adhesive tape.

Before placing a cassette in the tape deck

Take up any slack in the tape. Otherwise, the tape may get entangled in the parts of the tape deck and become damaged.

When using a tape longer than 90 minutes

The tape is very elastic. Do not change the tape operations such as play, stop, and fast-winding frequently. The tape may get entangled in the tape deck.

Cleaning the tape heads

Clean the tape heads after every 10 hours of use. Be sure to clean the tape heads before you start an important recording or after playing an old tape. Use a separately sold dry-type or wet-type cleaning cassette. For details, refer to the instructions of the cleaning cassette.

Demagnetizing the tape heads

Demagnetize the tape heads and the metal parts that have contact with the tape after every 20 to 30 hours of use with a separately sold demagnetizing cassette. For details, refer to the instructions of the demagnetizing cassette.

Specifications

Main unit

Amplifier section

The following measured at AC 120 – 127/220 – 240 V, 50/60 Hz (Saudi Arabian model only) The following measured at AC 230 V, 50/60 Hz (European and Russian models only) The following measured at AC 120/220 – 240 V, 50/60 Hz (except for European, Russian and Saudi Arabian models) The following measured at AC 220 V, 60 Hz (Korean model only)

MHC-NXM1

DIN power output (rated): 55 + 55 watts (6 ohms at 1 kHz, DIN) Continuous RMS power output (reference): 75 + 75 watts (6 ohms at 1 kHz, 10% THD)

MHC-NXM3

DIN power output (rated): 75 + 75 watts (4 ohms at 1 kHz, DIN) Continuous RMS power output (reference): 100 + 100 watts (4 ohms at 1 kHz, 10% THD)

Inputs

VIDEO/MD IN (phono jacks):

Sensitivity 250/450 mV,

impedance 47 kilohms

Outputs

DIGITAL (OPTICAL) OUT:

Optical Wavelength:

660 nm

PHONES (mini jack): accepts headphones with

an impedance of 8 ohms or more

SPEAKER: Use only the supplied

speakers

SS-NXM1

(MHC-NXM1)

SS-NXM3

(MHC-NXM3)

CD player section

System Compact disc and digital

audio system

Laser Semiconductor laser

( = 770 - 810 ~nm)

Emission duration:

continuous

Frequency response 2 Hz – 20 kHz (±0.5 dB)

Tape deck section

Recording system 4-track 2-channel stereo

Frequency response 50 - 13,000 Hz (±3 dB),

using Sony TYPE I

cassettes

Wow and flutter ±0.15% W. Peak (IEC)

0.1% W. RMS (NAB)

±0.2% W. Peak (DIN)

Tuner section

FM stereo, FM/AM superheterodyne tuner

FM tuner section

Tuning range

U.S.A. model: 87.5 - 108.0 MHz

(100-kHz step)

Russian model: 65.0 - 74.0 MHz

(10-kHz step)

(There is no stereo effect)

87.5 - 108.0 MHz

(50-kHz step)

Other models: 87.5 - 108.0 MHz

(50-kHz step)

Antenna FM lead antenna

Antenna terminals 75 ohms unbalanced

Intermediate frequency 10.7 MHz

AM tuner section

Tuning range

Pan-American model: 530 - 1,710 kHz

(with the tuning interval set at 10 kHz)

531 - 1,710 kHz

(with the tuning interval set at 9 kHz)

European, Russian and Saudi Arabian models:

531 - 1,602 kHz

(with the tuning interval set at 9 kHz)

Other models: 531 - 1,602 kHz

(with the tuning interval set at 9 kHz)

530 - 1,710 kHz

(with the tuning interval set at 10 kHz)

Antenna AM loop antenna

Antenna terminals External antenna terminal

Intermediate frequency 450 kHz

Speaker

Front speaker SS-NXM1 for MHC-NXM1

Speaker system 2-way, bass-reflex type

Speaker units

Woofer: 15 cm dia., cone type

Tweeter: 2.5 cm dia., balanced-dome-type

Nominal impedance 6 ohms

Dimensions (w/h/d) Approx. 173 × 275 × 265 mm

Mass Approx. 3.0 kg net per speaker

Front speaker SS-NXM3 for MHC-NXM3

Speaker system 2-way, bass-reflex type

Speaker units

Woofer: 15 cm dia., cone type

Tweeter: 2.5 cm dia., soft-dome-type

Nominal impedance 4 ohms

Dimensions (w/h/d) Approx. 173 × 275 × 265 mm

Mass Approx. 3.9 kg net per speaker

General

Power requirements

U.S.A. model: 120 V AC, 60 Hz

European and Russian models:

230 V AC, 50/60 Hz

Korean model: 220 V AC, 60 Hz

Saudi Arabian model: 120 - 127 V or

220 - 240 V AC, 50/60 Hz

Adjustable with voltage selector

Other models: 120 V, 220 – 240 V AC,

50/60 Hz

Adjustable with voltage selector

Power consumption

U.S.A. model:

MHC-NXM3 65 watts

European and Russian models:

MHC-NXM1 110 watts

0.3 watts (in Power Saving mode)

MHC-NXM3 65 watts

0.3 watts (in Power Saving mode)

Other models:

MHC-NXM1 115 watts

MHC-NXM3 65 watts

Dimensions (w/h/d) incl. projecting parts and controls

Amplifier/Tuner/Tape/CD section:

Approx. 230 × 292 ×

355 mm

Mass

Amplifier/Tuner/Tape/CD section:

MHC-NXM1 Approx. 6.5 kg

MHC-NXM3 Approx. 6.1 kg

Supplied accessories Remote Commander (1)

Size AA (R6) batteries (2)

AM loop antenna (1)

FM lead antenna (1)

Speaker pads (8)

Speaker cords

(MHC-NXM3 only) (2)

Design and specifications are subject to change without notice.

List of button locations and reference pages

How to use this page

Use this page to find the location of buttons and other parts of the system that are mentioned in the text.

Illustration number

Main unit

ALPHABETICAL ORDER

A - O P - Z

ALBUM +/- 11 (10, 11, 17)

BASS control 20 (19)

CD 28 (7, 9, 11, 13, 17, 18, 19)

CD SYNC 22 (17)

Deck A 17 (16)

Deck B 15 (16, 17, 18)

DIMMER 23 (23, 29)

DISC 1-5 3 (9, 10, 11)

Disc tray 9 (9)

DISPLAY 24 (15, 23, 24)

Display window 4

DSGX 12 (19)

PHONES jack 16

Remote sensor 2

TAPE A/B 26 (16, 17, 18)

TREBLE control 19 (19)

TUNER/BAND 27 (12, 14, 18)

TUNING +/- 10 (12, 14)

VIDEO/MD 25 (18, 26)

VOLUME control 13

BUTTON DESCRIPTIONS

I/⏻ (power) 1 (7, 13, 26, 29)

◀▶ (play) 5 (10, 16, 17, 22)

II (pause) 6 (10, 16)

■ (stop) 7 (7, 10, 13, 16, 17, 29)

CD ≧ (eject) 8 (9)

|◀◀◀◀/▶▶▶▶▶ (rewind/fast forward, go back/go forward) 10 (10, 16)

TAPE ▲ B(eject) 14 (16)

DISPLAY 21 (15, 23, 24)

ENTER 9 (8, 11, 13, 21, 22)

EQ 14 (19)

F-Z

FM MODE 4 (14)

FUNCTION 6 (9, 11, 12, 14, 16, 19)

PLAY MODE 20 (9, 11, 16, 17, 18, 22)

REPEAT 4 (11)

SLEEP 22 (20)

TAPE 17 (16)

TUNER BAND 5 (12, 14)

TUNER MEMORY 19 (12)

TUNING MODE 20 (12, 14)

VOLUME +/- 12 (21)

BUTTON DESCRIPTIONS

I/⏻ (power) 1 (7, 21)

◀◀/▶▶ (rewind/fast forward) 7 (10, 16)

▶ (play) 8 (10, 16)

II (pause) 8 (10, 16)

■ (stop) 8 (10, 16)

◀◀/▶▶ (go back/go forward) 16 (8, 10, 17, 19, 21)

-/+ (tuning) 16 (12)

ПРЕДУПРЕЖДЕНИЕ

graph LR
    A["Top View"] --> B["Arrow to Top Section"]
    B --> C["Bottom View with Insertion"]
    C --> D["Arrow to Front Section"]

Diagram of two open remote control devices with battery contacts and a switch, showing internal components (no text or symbols)

Примечание

Simple line drawing of a 3D rectangular frame with four vertical supports and dashed lines indicating hidden edges (no text or symbols)

Illustration of hands operating a microwave oven with a circular component on the tray (no text or symbols visible)

Simple line drawing of a mechanical component with a curved arrow indicating motion (no text or symbols)

DIGITAL (OPTICAL) OUT:

CD 28 (9, 10, 13, 15, 20, 21, 22)

CD SYNC 22 (20)

DIMMER 23 (27, 36)

DISC 1-5 3 (10, 11, 13)

DISPLAY 24 (17, 27, 28)

DSGX 12 (22)

TAPE A/B 26 (18, 20, 21)

TUNER/BAND 27 (14, 16, 21)

TUNING +/- 10 (14, 16)

VIDEO/MD 25 (21, 31)

Гнездо PHONES 16

Дека А 17 (18)

Дека В 15 (18, 20, 21)

■ (остановка) 7 (9, 11, 15, 19, 20, 36)

CD ≠ (извлечение) 8 (10)

CLOCK/TIMER SET 3 (9, 23, 25)

DISC SKIP 10 (11, 13)

DISPLAY 21 (17, 27, 28)

ENTER 9 (9, 13, 14, 23, 25)

EQ 14 (22)

F-Я

FM MODE 4 (17)

FUNCTION 6 (10, 13, 14, 16, 18, 22)

PLAY MODE 20 (11, 13, 18, 20, 21, 25)

REPEAT 4 (12)

SLEEP 22 (23)

TAPE 17 (18)

TUNER BAND 5 (14, 16)

TUNER MEMORY 19 (14)

TUNING MODE 20 (14, 16)

VOLUME +/- 12 (23)

ОПИСАНИЯ КНОПОК