WRE-1200 - Uncategorized Planet - Free user manual and instructions
Find the device manual for free WRE-1200 Planet in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Range Extender |
| Model | WRE-1200 |
| Brand | Planet |
| Wireless Standards | IEEE 802.11a/b/g/n/ac |
| Frequency Bands | 2.4 GHz (300 Mbps) + 5 GHz (867 Mbps) |
| Maximum Speed | 1200 Mbps total |
| Interfaces | 1x 10/100/1000 Mbps Ethernet port |
| Antenna Type | Internal dual-band antennas |
| Dimensions (W x D x H) | 120 x 80 x 30 mm (4.7 x 3.1 x 1.2 in) |
| Weight | 200 g (7.1 oz) |
| Power Supply | DC 5V, 1A via micro USB |
| Power Consumption | < 5W |
| LED Indicators | Power, WPS, Link/Activity |
| Buttons | WPS, Reset |
| Security | WPA/WPA2-PSK, WEP |
| Operation Modes | Range Extender, Access Point |
| Setup | Web interface, WPS push button |
| Environment | Operating temperature: 0°C to 40°C, Humidity: 10% to 90% non-condensing |
| Package Contents | WRE-1200, micro USB cable, quick installation guide |
| Maintenance | Clean with a soft dry cloth; avoid liquids and solvents |
| Safety | Use only the provided power adapter; keep away from water and heat sources |
| Spare Parts & Repairability | No user-replaceable parts; contact Planet support for issues |
Frequently Asked Questions - WRE-1200 Planet
How do I set up the Planet WRE-1200 range extender?
Plug the extender into a power outlet near your router. Press the WPS button on your router, then press the WPS button on the extender within 2 minutes. The LED will turn solid when connected. Alternatively, use the web interface by connecting to the extender's Wi-Fi and accessing 192.168.1.1.
What do the LED indicators mean?
Power LED: solid on. WPS LED: blinks during pairing, solid when connected. Link/Activity LED: solid when connected to router, blinks with data activity.
How can I reset the WRE-1200 to factory defaults?
Use a paperclip to press and hold the Reset button for about 10 seconds until the LEDs flash. The extender will reboot with default settings.
The extender is not connecting to the internet. What should I do?
Ensure the extender is within range of the main router. Check that the router's SSID and password are entered correctly. Try resetting both devices and try again. Also ensure the extender is not placed in an area with strong interference.
Can I use the WRE-1200 as a standalone access point?
Yes. You can switch to Access Point mode via the web interface. Connect the extender to your router via Ethernet, then configure it as an access point to create a new Wi-Fi network.
What is the maximum range of the WRE-1200?
Range depends on environment. Typically up to 300 meters in open space, but walls and obstacles reduce it. It's designed to cover medium-sized homes.
Does the WRE-1200 support dual-band concurrent connections?
Yes, it creates separate 2.4 GHz and 5 GHz networks. You can connect devices to either band.
How do I update the firmware?
Download the latest firmware from Planet's website. Log into the web interface, go to Administration > Firmware Upgrade, and upload the file. Do not power off during update.
What should I do if I forgot the admin password?
Perform a factory reset by holding the Reset button for 10 seconds. The default username and password are both 'admin' in lowercase.
Is the WRE-1200 compatible with all routers?
It works with any standard Wi-Fi router that supports 802.11a/b/g/n/ac. It is recommended to use the same wireless settings (SSID/password) for seamless roaming.
User questions about WRE-1200 Planet
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual WRE-1200 - Planet and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WRE-1200 by Planet.