Z10AB - Subwoofer PHOENIX GOLD - Free user manual and instructions

Product Type	Active Subwoofer Enclosure
Model	Z10AB
Woofer Size	10" / 250 mm
RMS Power	200 Watts
Max Power	800 Watts
Amplifier Type	Class-AB
Frequency Response	25 Hz - 200 Hz
Crossover Range	50 Hz - 200 Hz
Crossover Slope	6 dB per octave
Signal to Noise Ratio	>60 dB
Tuning Type	Bass Reflex
Fuse Rating	15A
Auto Turn-On	Yes
Dimensions (H x W x D)	476 x 343 x 331 mm
Weight (approx.)	15 kg (33 lbs)
Power Supply	12V DC (vehicle electrical system)
Inputs	RCA or Speaker Level
Remote Control	Wired bass remote level control included
Warranty	1 year limited
Installation	Fixed securely in vehicle; avoid fuel/brake lines
Recommended Fuse Location	Within 12" of battery
Disclaimers	Secure mounting required; not responsible for improper installation

Frequently Asked Questions - Z10AB PHOENIX GOLD

What are the dimensions of the Z10AB subwoofer?

The Z10AB has dimensions of 476 x 343 x 331 mm (H x W x D).

How much power does the Z10AB handle?

The RMS power rating is 200 Watts, with a maximum power handling of 800 Watts.

What type of amplifier is built into the Z10AB?

It uses a Class-AB amplifier.

How do I adjust the low-pass filter?

The low-pass filter control adjusts the highest frequency produced. Turn clockwise to increase the crossover frequency. Typical setting is around 100 Hz for blending with main speakers.

What is the recommended fuse rating and placement?

Use a 15A fuse placed as close to the battery as possible, within 12 inches.

Can I connect the subwoofer without RCA cables?

Yes, you can use speaker level inputs if your head unit lacks RCA outputs. Connect directly to the speaker wires.

Does the Z10AB have auto turn-on?

Yes, it has auto turn-on functionality, detecting signal from the remote wire or audio input.

What is the warranty period for the Z10AB?

Phoenix Gold offers a 1-year limited warranty from the original date of purchase against defects in materials and workmanship.

How do I connect the remote level controller?

Use the supplied lead to connect the remote level controller to the subwoofer. Mount the controller in the front of the vehicle for easy access.

What should I do if the subwoofer produces distorted sound?

Reduce the LEVEL control until distortion disappears. Also check that the input signal is not clipped and the gain structure is properly set.

USER MANUAL Z10AB PHOENIX GOLD

Z8AB / Z10AB / Z12AB

ACTIVE SUBWOOFER ENCLOSURES

SPECIFICATIONS

MODEL NO	Z8AB Z10AB Z12AB
MAX Power (Watts) 500 Watts 800 Watts 1000 Watts
RMS Power (Watts) 125 Watts 200 Watts 500 Watts
Amplifier Type Class-AB Class-AB Class-AB
Frequency Response 25-200hz 25-200hz 10Hz - 200Hz
Signal to Noise Ratio >60dB >60dB	>60dB
Crossover Slope	6dB per octave	6dB per octave
Crossover Range	50Hz - 200Hz	50Hz - 200Hz
Tuning	Bass Reflex	Bass Reflex Bass Reflex
Woofer Size	8" / 200mm	10" / 250mm
Fuse	15A	15A
Auto Turn-On	Yes	Yes
Dimensions (mm)	400 x 295 x 280m	476 x 343 x 331mm

INSTALLATION

Make sure the active enclosure is firmly fixed in your vehicle. Check before drilling or cutting holes. DO NOT work near fuel tanks, fuel lines hydraulic lines or electrical wiring.

DO NOT mount the active enclosure in such a way as to pinch or damage the wires.

Make sure everything is firmly connected before attaching a +12V wire.

Ensure the +12V wire is fused as close as possible to the battery. Always use a fuse with the recommended rating.

CONTROL DESCRIPTIONS

LEVEL

This allows the adjustment of the amplifier level of the subwoofer. Turn clockwise to increase the level. If the sound becomes distorted reduce the level.

LOW PASS FILTER

This allows the adjustment of the highest frequency the active enclosure will produce. This should be adjusted to blend with your main speakers. Typically, this will be set to around 100Hz (approximately the central position of the control knob).

BASS REMOTE CONTROL

This control can be mounted in the front of the vehicle to give you control of your subwoofers output level.

DISCLAIMER

Always ensure the Active Enclosure is securely attached, to avoid movement.

PHOENIX GOLD accepts no responsibility for damage or injury in relation to inappropriate securing of this product.

WIRING

Connect the ground wire to the vehicle first (clean dirt and paint to bare metal)
▶ Connect the remote on (blue wire)
▶ Connect the RCA cables if applicable OR
Connect the speaker level wire into the headunits speaker wires (See note1)
▶ Connect the remote level controller with the supplied lead
▶ Please ensure power wire is fused within 12" of battery
▶ Connect the 12 volt (red wire) to the positive battery terminal.
▶ Check all connections.

Disclaimer

Always ensure the bass enclosure is securely attached, to avoid movement. PHOENIX GOLD accepts no responsibility for damage or injury in relation to inappropriate securing of this product.

Phoenix Gold Product Warranty

LIMITED WARRANTY ON BASS ENCLOSURES

Phoenix Gold warrants this product to be free of defects in materials and workmanship for a period of one (1) years from the original date of purchase. This warranty is not transferable and applies only to the original purchaser from an authorized Phoenix Gold dealer. Should service be necessary under this warranty for any reason due to manufacturing defect or malfunction, Phoenix Gold or it's Country distributor / reseller will (at its discretion) repair or replace the defective product with new or re-manufactured product at no charge. Damage caused by the following is not covered under warranty: accident, misuse, abuse, product modification or neglect, failure to follow installation instructions, unauthorized repair attempts, misrepresentations by the seller. This warranty does not cover incidental or consequential damages and does not cover the cost of removing or reinstalling the unit(s). Cosmetic damage due to accident or normal wear and tear is not covered under warranty.