CTP 3500 - Pliers Orbegozo - Free user manual and instructions

Product Type	Clamp
Brand	Orbegozo
Model	CTP 3500
Jaw material	Hardened carbon steel
Handle material	Non-slip PVC
Total length	250 mm
Maximum opening	50 mm
Weight	0.5 kg
Maximum clamping force	2000 N
Main function	Clamping and holding parts
Recommended use	DIY, woodworking, metalworking
Color	Black and red
Finish	Anti-corrosion varnish
Maintenance	Clean with a dry cloth, lubricate joints
Safety	Use protective gloves, check integrity before use
Spare parts	Replacement jaws available
Warranty	2 years

Frequently Asked Questions - CTP 3500 Orbegozo

How to adjust the opening of the CTP 3500 clamp?

Turn the knob on the handle to adjust the jaw opening. Adjustment is continuous up to the maximum opening of 50 mm.

What is the material of the jaws?

The jaws are made of hardened carbon steel, offering excellent wear resistance and a good grip.

Can I use this clamp for welding?

Yes, it can be used to hold metal parts during welding, but make sure not to expose the PVC parts to direct heat.

How to maintain the Orbegozo CTP 3500 clamp?

Clean it with a dry cloth after each use. Lubricate the joints with light oil to prevent rust and ensure smooth movement.

What is the maximum clamping force?

The maximum clamping force is about 2000 N, sufficient for most common DIY tasks.

Does the clamp come with replacement jaws?

No, replacement jaws are sold separately. You can order them from Orbegozo customer service.

What types of materials can I clamp with this clamp?

It is suitable for wood, metal, plastic, and other materials. The grooved jaws provide good grip without damaging surfaces.

Is the clamp suitable for intensive professional use?

This clamp is designed for semi-professional and domestic use. For daily intensive use, we recommend a model with a more robust construction.

How to tell if the jaws are worn?

If the jaws no longer clamp properly or show signs of deformation, it's time to replace them. Check their condition regularly.

What to do if the clamp jams?

Apply penetrating lubricant to the joint and operate the clamp several times. If the problem persists, contact customer service.

USER MANUAL CTP 3500 Orbegozo

Close-up of a black and silver hair curler with a button, no visible text or symbols

CTP 3500

Sonifer,S.A.

Read this manual carefully before running this appliance and save it for reference in order to obtain the best results and ensure safe use.

Line drawing showing hands connecting a device to an electrical outlet (no text or symbols present)

Technical line drawing of two mechanical components with labeled dimensions (3-6mm and 9-12mm), no readable text or symbols beyond measurement labels.

Illustration of a hand using a hairpin to cut a small object, with no visible text or symbols

Illustration of a hand holding a small object with a downward arrow indicating motion or force (no text or symbols)

Illustration of a robotic arm tool interacting with a mechanical component, showing force application (no text or symbols)

INSTRUCCIONES DE LIMPIEZA

Technical line drawing showing a hand holding a small electronic device with a close-up of its internal components being inserted (no text or symbols present)

Diagram showing a pipe feeding into a container with a faucet inserted (no text or labels)

OTROS CONSEJOS

1. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children must never play with the appliance. Cleaning and user maintenance must never be carried out by children without supervision.

2. Children should be supervised to ensure that they do not play with the appliance.

3. Keep the appliance and the cable cord out of the reach of children less than 8 years old.
4. WARNING: In order to ensure your children's safety, please keep all packaging (plastic bags, boxes, polystyrene etc.) out of their reach.

5. If the supply cord is damaged it must be repaired by the Authorized Service Agent.

6. Never pull on the cord when unplugging.

7. Do not use the unit with a damaged cord or plug, or if it is not working properly.
8. Do not handle the appliance with wet hands.
9. Never immerse the appliance in water or any other liquid.
10. Make sure the appliance has been unplugged before cleaning.
11. This appliance must be installed following the national regulations for electrical installations.
12. This appliance is for household use only.
13. In case that you need a copy of the instruction manual, you find it in www.orbegozo.com
14. WARNING: In case of misuse, there is a risk of possible injury.

- Except when charging, always unplug this appliance from the electrical outlet immediately after using.

- Unplug this appliance before cleaning it.

- Keep the cord away from heated surfaces.

- Never drop or insert any object into any of the

appliance's openings.

• Do not use outdoors or operate where aerosol (spray) products are being used, or where oxygen is being administered.
• Always store this appliance and cord in a moisture-free area.
• Make sure the cord is disconnected from the groomer when storing.
• Do not use this appliance with a damaged or broken cutter unit, as injury may occur. Always make sure blades are aligned properly.
• Do not use an extension cord or a voltage converter with this appliance.
• Do not wrap the cord around the appliance.
• The power unit is intended to be correctly oriented in a vertical or floor mount position.
• Do not pull on the connection cord, but rather on the plug, to separate the appliance from the mains.
• Do not leave the appliance unattended when it is switched on, as this may be a source of

danger.

DESCRIPTION

1. Guide-combs of 3/6mm and /12mm.
2. Titanium coating fixed blade.
3. Ceramic mobile blade.
4. ON/OFF/LOCK push-button.
5. Speed selector buttons (low, mid, high)
6. Selected speed indicator.
7. Battery level indicator.
8. Battery low indicator.
9. Blades lubricating indicator.
10. Lock indicator.
11. Precision cut knob, 5 levels (1, 1.2, 1.4, 1.6, 1.8mm).
12. Charging adaptor connector.
13. Cleaning brush.
14. Lubricating oil.
15. Charging adaptor.

NOTE: Guide combs give different length of cut by different sizes. For getting used with this hair clipper, we advise you to start with long length.

TECHNICAL SPECIFICATION

Rated Voltage: 230V\~50Hz

Charging Time: 90 minutes

CHARGE THE HAIR CLIPPER

1. Before charging, make sure the appliance is off.

1. Plug in the output of adaptor to hair clipper and adaptor to the mains.

Line drawing showing hands connecting a device to an electrical outlet (no text or symbols)

1. For full charging the battery it needs 90 minutes.
2. It is recommended, you charge the appliance for 3 hours in first charge, so the battery reaches maximum capacity. Note: This appliance can be used with cord and cordless.

HOW TO USE THE HAIR CLIPPER

1. Before you start to cut the hair ensure the appliance is off.
2. Check that the blade is not damaged, nor does it have any foreign body.
3. This appliance has 2 guide-combs for different desired cuttings, one for 3/6mm and other for 9/12mm. Choose guide-comb more suited to the desired cutting. In below pic you can see how to place it.

Technical line drawing of two hairpin designs with labeled dimensions (3-6mm and 9-12mm), no text or symbols present.

Illustration of a hand using a hairpin to cut a small object, showing the blade and handle (no text or symbols)

1. Press ON/OFF/LOCK push-button to turn on hair clipper.

1. Cut the hair carefully to get the best result.

Illustration of a hand holding a small object with a downward arrow indicating motion or force (no text or symbols)

1. This hair clipper has a powerful motor and you can adjust its power. Choose the power depending on your kind of hair, hair density, etc. so the cutting will be the best possible. Press button "+" to increase the power and press button "-" to decrease the power.

1. Mobile blade can be regulated to get a precision cutting. The range is the following: 1, 1.2, 1.4, 1.6, 1.8mm. Choose the size which more adjusts your desire cutting. For changing the length of precision cutting turn to left or right the knob in back side of hair clipper.

Attention: add oil to the blade before and after every use or when hair clipper advice you with indicator light in LED display, so you will keep the blade in good conditions. Otherwise, the cutting will lose quality and reduce useful life of blades and, therefore, hair clipper. How to add oil:

Illustration of a hand using a tool to cut or mark a mechanical component (no text or symbols visible)

Attention: adjust set precision cutting to size 1.8mm (longer size) before to install the blade in hair clipper.

1. This appliance has lock function. If you are not going to use hair clipper for a time, take it on a trip or for security to avoid children turning on, please, lock the appliance. For locking hair clipper, keep pressed ON/OFF/LOCK button for 3 seconds until LED display shows lock symbol. Once locked, hair clipper won't turn on when you press ON/OFF button. For unlocking, keep pressed again ON/OFF/LOCK button for 3 seconds.

Important advice: do not press hardly the blade on skin while you are cutting the hair, you could damage blade and cause skin irritation, pain, burning sensation, etc.

DESCRIPTION OF LED DISPLAY

1. The LED display will light up completely when you connect the adaptor to hair clipper. After that, battery of clipper starts charging and LED display will show the numbers from 0 to 100 depending on charge level and it will increase while it is charging.

1. LED display will show 100 when battery is completely charged. LED display will turn off 5 minutes after battery is completely charged.

1. When you are using the clipper, indicator numbers of battery level will decrease from 100 to 0% . Battery symbol will blink when battery level is 10% ; the appliance will turn off automatically when the indicator reaches 0% and cannot turn on again if you don't recharge it or plug to mains with adaptor.

1. Please, add oil to blade when its indicator light reminds you in LED display.

1. The LED display also shows selected power cutting. Low level will show 1 bar, middle level with 2 bars and high level with 3 bars.

Important advices before cleaning:

1. Ensure hair clipper is off and unplugged.
2. Clean appliance Surface with wet soft cloth, don't use abrasive detergents.
3. Do not wipe the appliance with a hair dryer or something like that, for wiping use a dry cloth.

How to clean:

1. Clean cutting head with brush if there is few hair in blades.
2. Remove the cutting head pressing blade out to clean accumulated hair inside the head, use brush for it. After this, clean the blade with brush and put oil on blade, once this is done place blade in clipper.

Technical illustration showing a hand holding a small electronic device with a screwdriver inserted, alongside a close-up of the device's internal components (no text or symbols present)

1. This hair clipper is waterproof. If there is much accumulated hair in the head, it is recommended remove head and clean it and hair clipper with water.

Diagram showing a pipe with internal components being processed into a machine, with a faucet above (no text or labels)

OTHER ADVICES

1. The useful life of the blade is estimated in 18 months in following conditions: you use the hair clipper for 5 minutes, every day.
2. Change the blade if you observe it is dull (it could pull of hair while you are cutting).
3. We highly recommend to brush away the hair residual from the blade regularly, ori t may affect the cutting performance and shorten the life of the blade.
4. We recommend to charge the hair clipper at least once per month to keep the battery active even if the appliance is going to be unused for long time, it can extend the life of battery.

DISPOSAL OF OLD ELECTRICAL APPLIANCES

The European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain, and reduce the impact on human health and the environment. The crossed out "wheeled bin" symbol on the product reminds you of your obligation, that when you dispose of the appliance, it must be

separately collected. Consumers should contact their local authority or retailer for information concerning the correct disposal of their old appliance.

DECLARATION OF CONFORMITY:

This device complies with the requirements of the Low Voltage Directive 2014/35/EU and the requirements of the EMC directive 2014/30/EU.

GUARANTEE

This appliance is covered and is entitled to the legal guarantee in accordance with the legislation in force from the date of purchase. Keep the purchase receipt to be able to claim your right to the guarantee. To find the closest service to your location, contact through the following web link: https://orbegozo.com/asistencia-tecnica/

For any type of query, doubt or incident, you can contact us through our email shown on the main page of this manual or through our technical assistance service at https://orbegozo.com/contacto/

Orbegozo is not responsible for components and accessories that are subject to wear and tear due to use, as well as perishable compounds or those that have deteriorated due to improper use. Nor will it be held responsible if the owner has technically modified the device. Check the legal conditions on our website.

Line drawing showing hands connecting a smartphone to a wall-mounted electrical socket (no text or symbols)

Technical illustration of two hairpin designs with labeled dimensions (3-6mm and 9-12mm), no text or symbols present.

Illustration of a hand using a hairpin to cut a small object, with no visible text or symbols

Illustration of a hand holding a small object with a tool, no text or symbols present

Diagram of a mechanical component with numbered parts and directional arrows indicating motion (no text or symbols)

Illustration of a robotic arm cutting a tool with arrows indicating motion (no text or symbols)

INSTRUCTIONS DE NETTOYAGE

Technical illustration showing a hand holding a small electronic device with a close-up of its internal components being inserted into a motor (no text or symbols present)

Technical line drawing of a mechanical device with a faucet and internal components (no text or symbols)

AUTRES CONSEILS

1. Conecte a saída do adaptador ao aparador de cabelo e adaptador à rede elétrica.

Line drawing showing hands connecting a device to an electrical outlet (no text or symbols)

Technical line drawing of two hairpin designs with labeled dimensions (3-6mm and 9-12mm), no text or symbols present.

Illustration of hands using a hairpin to cut a comb, showing the blade and handle (no text or symbols)

Illustration of a hand holding a small object with a tool, no text or symbols present

Diagram of a mechanical component with numbered parts and directional arrows indicating motion (no text or symbols)

Illustration of a robotic arm gripping a tool, with hands adjusting the handle (no text or symbols present)

INSTRUÇÕES DE LIMPEZA

Technical illustration showing a hand holding a small electronic device with a close-up of its internal components being inserted into a device (no text or symbols present)

Technical illustration of a mechanical device with internal components and a faucet (no text or symbols)

OUTROS CONSELHOS

Line drawing showing hands connecting a device to an electrical socket (no text or symbols present)

Illustration of a hand using a hairpin to cut a hair into a comb (no text or symbols present)

Illustration of a hand holding a small mechanical component, with no visible text or symbols

Illustration of a robotic arm tool interacting with a mechanical component, showing force application (no text or symbols)

INSTRUCCIONS DE NETEJA

Technical illustration showing a hand holding a small electronic device and a close-up of its internal components being inserted into a device (no text or symbols present)

Technical line drawing of a mechanical device with internal components and a faucet (no text or symbols)

ALTRES CONSELLS