CP 79132 - Fan Orbegozo - Free user manual and instructions
Find the device manual for free CP 79132 Orbegozo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Pedestal fan with remote control |
| Brand | Orbegozo |
| Model | CP 79132 |
| Color | White and gray |
| Adjustable height | Yes, telescopic pole |
| Grille diameter | 40 cm |
| Power | 60 W |
| Supply voltage | 220-240 V ~ 50 Hz |
| Fan speeds | 3 speeds |
| Operating modes | Normal, natural breeze, night |
| Oscillation | 90° horizontal |
| Remote control | Yes, included with battery |
| Timer | Programmable from 1 to 7 hours |
| Control type | Touch panel on base + remote control |
| Noise level | ≤ 60 dB |
| Dimensions (L × H × D) | 40 × 130 × 40 cm |
| Net weight | 5.2 kg |
| Cable length | 1.5 m |
| Maintenance and cleaning | Clean the grille with a damp cloth, do not immerse, dust with a brush |
| Safety | Fine-spaced front grille, automatic stop in case of tipping |
| Spare parts and repairability | Blade, grille, motor available via Orbegozo after-sales service |
| Warranty | 2 years |
Frequently Asked Questions - CP 79132 Orbegozo
How to assemble the Orbegozo CP 79132 fan?
Start by fixing the base by screwing it to the telescopic pole. Then mount the motor on the pole, then attach the rear grille, the blade, and finally the front grille by locking it with the provided ring.
How to clean the fan without damaging it?
Always unplug the appliance before cleaning. Use a damp cloth to wipe the grille and the blades. Never immerse the base in water and do not use abrasive products.
What to do if the remote control no longer works?
First check that the battery is not discharged. If the problem persists, use the touch buttons directly on the base. Replacing the battery with a CR2032 type usually solves the problem.
The fan makes an abnormal noise, what to do?
Make sure the screws on the grille and the pole are well tightened. Also check that the blade is not deformed and that no foreign object is blocking the motor. If the noise persists, contact after-sales service.
How to use the timer on the CP 79132?
Press the Timer button to activate the timer. Each press increases the duration by one hour, up to a maximum of 7 hours.
Does the fan oscillate automatically?
Yes, the fan has a 90° horizontal oscillation function. You can activate or deactivate it via the remote control or the button on the base.
What is the maximum height of the fan?
The height can be adjusted thanks to the telescopic pole. The maximum height is approximately 130 cm, allowing you to direct the airflow wherever you want.
Can the fan be used continuously all night?
Yes, thanks to the night mode and the low noise level (≤ 60 dB), it is suitable for nighttime use. The timer allows you to program automatic shut-off.
Where to find spare parts for this model?
Parts such as the blade, the grilles, or the motor are available through Orbegozo's after-sales service. Visit their website or contact an authorized dealer.
The fan stops by itself, is this normal?
This may be a safety device: if the fan tips over slightly, a tipping switch cuts off the power. Also check that the timer is not programmed.
User questions about CP 79132 Orbegozo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Fan in PDF format for free! Find your manual CP 79132 - Orbegozo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CP 79132 by Orbegozo.
USER MANUAL CP 79132 Orbegozo
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Orbegozo
Model : CP 79132
Category : Fan