SN09LPBX-P - Air-conditioner LG - Free user manual and instructions
Find the device manual for free SN09LPBX-P LG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Split Air Conditioner (Wall-Mounted) |
| Brand | LG |
| Model | SN09LPBX-P |
| Cooling Capacity | 9000 BTU (2.6 kW) |
| Heating Capacity | 9000 BTU (2.6 kW) |
| Power Supply | 220-240 V ~ 50 Hz |
| Rated Cooling Power Input | 750 W |
| Rated Heating Power Input | 750 W |
| Energy Efficiency Ratio (EER) | 3.2 |
| Refrigerant | R32 |
| Indoor Unit Dimensions (WxHxD) | 800 x 285 x 189 mm |
| Outdoor Unit Dimensions (WxHxD) | 660 x 450 x 290 mm |
| Indoor Unit Weight | 9.5 kg |
| Outdoor Unit Weight | 27.5 kg |
| Airflow Volume | 500 m³/h |
| Noise Level Indoor (Low/High) | 21 / 39 dB(A) |
| Noise Level Outdoor | 48 dB(A) |
| Operating Temperature Range (Cooling) | -5°C to 43°C |
| Operating Temperature Range (Heating) | -15°C to 24°C |
| Filter Type | Washable Antibacterial Filter |
| Timer Function | 24-hour On/Off Timer |
Frequently Asked Questions - SN09LPBX-P LG
How do I clean the air filter?
Open the front panel, remove the filter, wash it with clean water, let it dry completely, and reinstall it.
How do I set the timer?
Press the Timer button on the remote control, then use the +/- buttons to set the desired on/off time.
What does an error code mean?
Refer to the error code table in the user manual. Common codes include: E1 (room sensor), E2 (pipe sensor), etc.
How do I switch between cooling and heating?
Press the Mode button on the remote control repeatedly to cycle through Cool, Heat, Fan, and Auto modes.
Why is the unit not cooling?
Check if the filter is clogged, ensure the set temperature is below room temperature, and verify that the power supply is stable.
How do I use the energy saving mode?
Press the Energy Saver button on the remote control. The unit will operate more efficiently by cycling the fan.
Can I install the air conditioner myself?
It is recommended to have a professional installer perform the installation to ensure proper drainage, refrigerant handling, and electrical connections.
How often should I clean the filter?
Clean the filter every two weeks under normal usage, or more frequently if the environment is dusty.
What type of refrigerant is used?
This unit uses R32 refrigerant, which is environmentally friendly and energy efficient.
How do I reset the remote control?
Remove the batteries, press and hold the Reset button (or any button) for 2 seconds, then reinsert the batteries.
User questions about SN09LPBX-P LG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air-conditioner in PDF format for free! Find your manual SN09LPBX-P - LG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SN09LPBX-P by LG.