HL01B - Flashlight GoGen - Free user manual and instructions

Product Type	Headlamp
Brand	GoGen
Model	HL01B
Dimensions	75 x 59 x 42 mm
Weight	96 g
Power Source	3 x AAA batteries (1.5V)
Brightness	220 lumens
Runtime	Up to 6 hours (depending on battery type)
Beam Distance	Up to 55 m
Light Modes	Low, high, red light, red strobe
Power Button	Press to cycle through modes: low → high → red → off
Sensor Button	Press to enable/disable gesture control (wave hand to turn on/off)
Red Strobe	Hold sensor button for 3 seconds to activate
Battery Installation	Open back cover, insert batteries with positive (+) inward
Battery Warnings	Do not mix battery types; do not mix old and new; remove used batteries
Safety	Never look directly at LED without eye protection
Maintenance	Clean with dry cloth; dry thoroughly if exposed to water
Repairability	No user-serviceable parts; contact authorized service
Disposal	Do not dispose as household waste; recycle at applicable collection point
Package Contents	Headlamp, elastic head-strap, 3xAAA batteries, manual

Frequently Asked Questions - HL01B GoGen

How do I turn on the headlamp?

Press the power button to turn on at low brightness. Press again for high, again for red, and again to turn off.

How do I activate the sensor function?

Press the sensor button to enable gesture control. Wave your hand in front of the headlamp to turn the light on/off.

How do I use the red strobe?

Hold the sensor button for 3 seconds to start the red light strobing. Press again to stop.

What batteries does the HL01B use?

It uses three 1.5V AAA batteries. Insert them with the positive (+) terminal pointing inward.

Can I mix different battery types?

No, never mix alkaline, standard (carbon-zinc), or rechargeable (NiMH) batteries. Also do not mix new and used batteries.

Is it safe to look directly at the light?

No, never look directly at the LED without eye protection. It can cause eye damage.

How do I clean the headlamp?

Clean with a dry cloth. If it gets wet, dry it thoroughly before using again.

What is the maximum beam distance?

The beam can reach up to 55 meters (180 feet).

How long does the battery last?

Runtime is up to 6 hours, depending on the brightness mode and battery quality.

Can I repair the headlamp myself?

No, there are no user-serviceable parts. Contact an authorized service center for repairs.

USER MANUAL HL01B GoGen

Abstract logo design with a stylized white 'S' inside a circle on black background (no text or symbols)

HL01B

GoGEN

Close-up of a black Gogen headband with white patterned strap and lens (no text or symbols visible)

1. HLAVNÍ VYPÍNAČ
2. TLAČÍTKO SENZORU

FUNKCE SVĚTLA

Symbol of a trash bin crossed with a diagonal line and a horizontal bar below (no text or labels)

1. HLAVNÝ VYPÍNAČ
2. TLAČIDLO SENZORU

FUNKCIA SVETLA

Symbol of a trash bin crossed with a diagonal line and a horizontal bar below (no text or labels)

Thank you for buying our product. Please read through these operating instructions, so you will know how to operate your equipment properly. After you finished reading the instructions manual, put it away in a safe place for future reference.

PACKAGE INCLUDE

Headlamp, elastic head-strap, 3xAAA batteries, manual

ATTENTION: In any case, never look directly at the LED without eye protection.

BATTERY INSTALLATION

1. Turn the back of the headlamp to open the battery compartment.
2. Insert 3x 1.5V size(AAA) battery correctly as the “+” polarity inwards.
3. Close the battery compartment.

WARNING

• Never mix alkaline, standard (carbon-zinc), and rechargeable (nickel hydride).
• Don't mix new and used batteries.
• Don't attempt to recharge non-rechargeable batteries.
• Remove used batteries.
• Never short the power supply terminals.
  • Always use the recommended or equivalent battery types.
  • Always pay attention to battery polarity.
• Do not store batteries in the light for long periods, they may leak and damage the headlight.

OPERATING INSTRUCTIONS

1. POWER BUTTON
2. SENSOR BUTTON

LIGHT FUNCTION

Press the power button to turn on the white led at a low level. Switch the light to the high level with the next press of the power button. Next press switches white light to red. Turn off the headlamp by the next press.

SENSOR FUNCTION

Press the sensor button to turn on the sensor function. You can turn on/off the light by waving the hand in the front of the headlamp.

Hold on to the sensor button for 3 seconds to start the red light strobing.

MAINTENANCE

• If the headlight gets dirty clean it with a dry cloth.
• If your headlight is accidentally submerged or exposed to water, dry out any water that might have been immersed before using it again.

TECHNICAL SPECIFICATIONS

Lumens 220 lm
Batteries 3x AAA
Runtime up to 6 hours	(according to the type of used batteries)
Light distance up to 55 m
Weight 96 g
Size 75 x 59 x 42 mm

WE RESERVE THE RIGHT TO CHANGE TECHNICAL SPECIFICATIONS.

THERE AREN'T ANY PARTS IN THIS APPLIANCE WHICH ARE REPARABLE BY CONSUMER. ALWAYS APPEAL TO A QUALIFIED AUTHORIZED SERVICE.

Disposal of old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)

Symbol of a trash bin crossed with a diagonal line and a horizontal bar below (no text or labels)

This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.

1. WŁĄCZNIK
2. PRZYCISK CZUJNIKA

FUNKCJA LAMPY

Symbol of a trash bin crossed with a diagonal line and a horizontal bar below (no text or labels)

1. BEKAPCSOLÓ GOMB
2. SZENZOR GOMB

VILÁGÍTÁS FUNKCIÓ

Symbol of a trash bin crossed with no text or numbers, representing waste sorting or disposal (no text present)